Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Mandibular Prosthesis”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources

Alternative management of the aging jawline and neck.

The lower third of the face and neck have distinct changes that occur with aging. These changes can be globally and dramatically addressed with a traditional rhytidectomy. However, as the demographics of facial plastic surgery patients evolve, patients seek increasingly less invasive procedures that will result in faster recovery time and less postoperative morbidity. To accommodate this change, today's facial plastic surgeon must include less invasive procedures in the treatment strategies for the lower face and neck. Correct, patient-specific procedure selection and patient education can yield results similar to those of a traditional facelift. This article discusses options available for treatment of the lower face and neck.

Age Factors↗

Mandibular matrix implant system: a method to restore skeletal support to the lower face.

Disharmony between the skeletal support and the softtissue envelope is a common cause of aesthetic concerns regarding the lower face. A loss of volume or a genetically small mandible affects the aesthetics and function of the mouth, chin, and neck. Because of the limitations of correcting such problems with current implants made of silicone or porous polyethylene, the author developed an implant system and a method of restoring the entire volume of the mandible called the mandibular matrix implant system. This implant system is made of high-density porous polyethylene and is composed of an articulated wraparound geniomandibular implant and a wraparound gonial angle implant. A prejowl implant can be integrated in the system as an addition or as a replacement for a chin implant. This implant system has different sizes and projections, and it can be modified by carving to fit the requirements of most patients. Carving is done using an appropriate sizer. This implant system is indicated for use in patients with a congenitally small mandible, edentulous patients, and patients requesting facial enhancement. The mandibular matrix implant system is implanted either during a single procedure or simultaneously with a facial rejuvenation. The extended geniomandibular implant is introduced through an anterior oral sulcus incision or a submental incision. The mandibular angle implant is introduced through a retromolar incision. The posterior end of the chin implant overlaps the anterior end of the gonial implant, and screw fixation of each chin component helps to stabilize the entire system. Antibiotics, irrigation, and closure of the incisions are performed before any additional operative procedure. The complete system has been used in 13 patients; one additional patient had the complete system plus an overlapping additional left prejowl implant for correction of asymmetry. Complications were manageable; these included one mandibular angle implant displacement and one infection. The implant displacement required a reoperation to reset the implant. The infection was treated with irrigation and closed system suction; the implant was salvaged. The satisfaction of patients has been high, and the author can now solve aesthetic problems that in the past were considered unsolvable.

Chin↗

Vertical chin augmentation with interpositional porous polyethylene implants: a histologic study in monkeys.

The objective of this paper was to evaluate histologically the tissue reaction in the chin after a vertical augmentation using interpositional porous polyethylene (PPE) implants in monkeys. Six monkeys (Cebus apella) underwent an anterior horizontal mandibular osteotomy with implantation of an interpositional PPE implant to increase the vertical height. The animals were sacrificed 5 months postoperatively. Histologic preparations were stained with hematoxylin and eosin. The perimeter of the interface between the implant and the bone, the implant and the trabecular space, and the implant and the fibrous capsule were quantified using the NIH Image Analysis System (Image 1.60/PPC). In addition, the Tukey test was done. The study demonstrated that bone growth takes place within the pores of the implant; a fibrous capsule exists in some animals, where the implant has contact with the periosteum and mentalis muscle with few chronic inflammatory cells; and the 3 different tissues responded in statistically different manners. Perimeter analysis revealed 68.9% implant-bone contact, 22.9% implant-fibrous tissue contact, and 8.2% implant-trabecular space contact.

Animals↗

[Displacement of the titanium endoprosthesis of the mandibular condyle process towards the middle cranial fossa and method for its repair].

A clinical case is presented: endoprosthesis of the articular depression of the temporomandibular joint (TMJ) was used in the treatment of a patient with a complication which developed several years after insertion of an isolated endoprosthesis of the mandibular condylar process. This case is presented as a proof of the efficiency of a complete TMJ endoprosthesis.

Female↗

[Individual digital design and functional reconstruction of large mandibular defect with computer-aided design/computer aided manufacture technique].

OBJECTIVE: To build up a new contour and functional reconstruction technique of mandibular defects with rapid prototyping and reverse engineering technique. METHODS: From April 2002 to August 2004, 4 cases of mandibular defects due to resection of large mandible lesion were treated. Of 4 patients, there were 3 females and 1 male, with an age range of 21-42 years, which underwent secondary operation and presented a deviation as mandibular movement. The opening-mouth extent was 1.8-2.5 cm (2.2 cm on average). The data of defects area were renewed with Mimics and Geomagic Studio software; and the titanium reconstructive frame was designed and manufactured with rapid prototyping technique. Defect were reconstructed by using CT digital data of patients. RESULTS: The CT data could be used by image software directly. The implant design could be completed by computer-aimed design (CAD) / computer-aided manufacture (CAM). The resin model and titanium frame were manufactured accurately by RP technique. Four patients achieved one stage healing. After a follow-up of 3 months to 2 years, large mandibular defect was reconstructed satisfactorily and the opening-mouth extent was 3.0-3.4 cm (3.2 cm on average). The occluding relation was normal. The implant denture was put on and the mastication function was good in 1 case. CONCLUSION: Individual design and repair of large mandibular defect with CAD/CAM techniques is worth extending application clinically. It is a simple and accurate method.

Adult↗

The prosthetically guided osteodistraction of the mandible in the microvascular bone reconstruction after cancer surgery.

The rehabilitation of the mandible after ablation cancer surgery is a challenge. Furthermore, osteodistraction in the microvascular fibula flap makes it difficult to predict adequate bone lengthening. The aim of this article is to evaluate a protocol used to manufacture templates for measuring osteodistraction, in terms of force vectors and definitive height. An accurate prosthetic wax-up with guide pins measuring the quantity of bone lengthening must be performed to manufacture the template. This device may be used to establish the end of the osteo-distraction in respect to the vertical dimension of the definitive occlusion.

Adolescent↗

A within-subject comparison of mandibular long-bar and hybrid implant-supported prostheses: evaluation of masticatory function.

Sixteen edentulous subjects participated in a within-subject crossover clinical trial to test the hypotheses that a long-bar overdenture attached to 4 implants gives greater patient satisfaction and masticatory efficiency than a two-implant hybrid overdenture. All subjects were given a new maxillary conventional denture. Ten received mandibular long-bar overdentures first and six the hybrid overdentures. Two months later, psychometric assessments and functional tests were repeated 3 times at one-week intervals. The mandibular prosthesis was then changed, and recordings were repeated after another 2 months. Mandibular movements and electromyographic activity of jaw muscles were recorded while subjects chewed standard-sized pieces of 5 foods: bread, cheese, apple, sausage, and carrot. Measurements included masticatory time, cleaning time (the time between the end of mastication and the last swallow), and duration and amplitude of masticatory cycles and phases. Multilevel analyses were performed. No significant differences in masticatory time were found between prostheses for any test food. However, cleaning time for carrot [estimated mean of difference (delta) +/- SE: 1.6 sec +/- 0.7] and bread (delta = 1.0 sec +/- 0.4) was slightly but significantly longer for subjects wearing long-bar overdentures. Cycle duration was longer with the long-bar overdenture only for subjects chewing carrot. The opening phase was shorter and the closing phase longer with the long-bar overdenture for almost all test foods. Vertical amplitude was significantly less with the long-bar overdenture for cheese (delta = -2.6 mm +/- 1.1), apple (delta = -2.6 mm +/- 1.0), and sausage (delta = -2.9 mm +/- 1.3). These results suggest that mastication with the 2 prostheses is equally efficient, although clearance of some foods from the mouth is longer with the long-bar overdentures. They also indicate that patients adapt their masticatory movements to the characteristics of different prostheses.

Adult↗

A technique for the delivery of complete dentures.

This article describes a technique for the delivery of complete dentures which allows the patient to adapt to a mandibular prosthesis and, at the same time, to functionally make a final refitted mandibular impression.

Denture Design↗

Dental restoration with endosseous implants after mandibular reconstruction using a fibula free flap and TMJ prosthesis: a patient report.

This patient report describes the secondary reconstruction of a hemimandibular and condylar defect and the dental restoration of a 56-year-old woman who had been subjected to radical ablative surgery 30 years earlier to remove a tumor. In the first phase, a fibula free flap was used in combination with a total TMJ prosthesis for the reconstruction of the hemimandible and condyle. Secondly, 3 endosseous implants were placed in the residual mandible. These implants were used to support an overdenture prosthesis that has remained in continuous function for a period of 2 years.

Dental Implants↗

Combination syndrome: treatment with dental implants.

Occlusal plane problems are often not evaluated adequately. They can be left untreated or improperly treated. This article reviews one such problem known as Combination Syndrome. The treatment method described involves using a fixed mandibular prosthesis over implants that have been placed immediately after dental extractions.

Alveoloplasty↗

A large maxillofacial prosthesis for total mandibular defect: a case report.

We successfully fabricated a large maxillofacial prosthesis for replacement of a total mandibular defect resulting from surgical failure to reconstruct the mandible. Although a number of reports have described procedures for fabricating midfacial prostheses, there is little information on prostheses to compensate for total loss of the mandible. A 54-year-old woman was referred to the Dentistry and Oral Surgery Division of the National Cancer Center Hospital with total loss of the mandible and the surrounding facial soft tissue. The facial prosthesis we used to treat this patient is unique in that it is adequately retained without the use of extraoral implants and conventional adhesives. This prosthesis is retained by the bilateral auricles and the remaining upper front teeth. We present details of the design of this large silicone maxillofacial prosthesis, with which we successfully rehabilitated the patient.

Female↗

Reduction of the median mandibulotomy with the fixed mandibular implant.

A technique is presented whereby a median mandibulotomy of an atrophic edentulous mandible is performed to gain access to an oropharyngeal tumor and is subsequently reapproximated with a four-pin FMI. The procedure allows reduction of the osteotomy site and provides intraoral implants that increase the stability and retentive properties of a mandibular prosthesis.

Alveolar Bone Loss↗

Treatment of a patient with severe osteoporosis and chronic polyarthritis with fixed implant-supported prosthesis: a case report.

This article reports the treatment and 5-year follow-up of an 80-year-old female with a history of severe osteoporosis and chronic polyarthritis. Treatment included methotrixate disodium and acemetacin. After the last tooth was removed from the mandible, the patient was successfully treated with a fixed mandibular prosthesis supported by 6 implants placed between the mental foramina. The implants have remained osseointegrated, and peri-implant smears have been negative for bacterial colonization. Radiographic follow-up examination has revealed bone loss that is slightly greater than expected. This article focuses on the placement of implants in a patient receiving medication for chronic polyarthritis and osteoporosis.

Aged↗

Comparison of four different denture cushion adhesives--a subjective study.

Four cushion adhesives (Fittydent I; Fittydent II, introduced as an advanced formula; Protefix; and Seabond) were compared clinically through patients subjective evaluations. Maxillary dentures of 32 patients were relined and the mandibular dentures were scored by Kapur index before the application of different treatments. The cushion adhesives were used only with the existing mandibular prosthesis. The four treatments were applied to the patients in groups of 8 by allocating each group randomly to one of the four sequences of treatments determined by latin square design. Each patient took each treatment only once. The adhesives were applied by the authors as recommended by the manufacturers. Patients used each material for 24 h and, through a questionnaire, they evaluated the seven following aspects of each different cushion material: retention, duration of retention, effects on ability to chew, effects on other oral functions, cleansing of dentures, cleansing of gums, and an overall evaluation of materials. Both Fittydent products significantly improved denture retention and the ability to chew. The patients who expressed 'much better' chewing with Fittydent products, had mandibular dentures rated poor or fair.

Adhesives↗