Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “GLASSES”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources
PubMed1991

A glass wool-based method for purifying Trypanosoma cruzi trypomastigotes and identification of an epimastigote-specific glass-adherent surface peptide.

Glass wool, hydrophilic cotton wool, non-electrically charged BIO-GEL P2 and common tissue paper columns were used to purify trypomastigotes from a mixed Trypanosoma cruzi population grown in axenic culture medium. With all these columns, highly purified (up to 98%) trypomastigote preparations were obtained. Trypomastigote yields from cotton wool, BIO-GEL P2 and common tissue paper columns were not as high as from glass wool columns, from which yields varied from 69 to 80%. Purification on glass wool did not affect trypomastigote infectivity or virulence. Dead trypomastigotes could not be purified on glass wool columns. A glass-adherent amphiphilic peptide of 45 kDa, present in the cell membrane, was isolated from epimastigote but not from trypomastigote preparations.

Animals↗
PubMed2001

Glass fibers covered with sol-gel glass as a new support for affinity chromatography columns: a review.

The search for mechanical supports for biochemically active compounds serving as immunochemical sensors has been the goal of many studies. A new compound in the form of gel fiberglass (GFG) membranes was recently developed as an example of such supports. In this review, these membranes were analyzed with respect to their use for cancer detection. The membranes are prepared from glass fibers covered with oxysilane to provide a sol-gel glass matrix. Derivatization of the support eliminates nonspecific adsorption. A thin layer of protein trapped in the gel glass during its preparation is deposited on the surface of a lattice of glass fibers. The major innovation of the membrane is its large area. External agents percolating through such a membrane contact a maximal number of molecules of the compounds trapped in the sol-gel glass. As a result, this membrane is highly effective. Each GFG column is built from a series of 20 to 30 membranes. The preparation of such columns is relatively simple, requiring only several hours. The capacity of GFG columns is high: the total amount of tumor-associated antigens (TAA) isolated by these columns from the blood of colon cancer patients reached 50% of the total protein and amounted to up to 9-12 mg/ml of serum. The main components of the isolated TAA were the soluble p66 and p51 proteins. A determination of their concentration by HPLC can be used for early cancer detection. Thus, the described method allows the easy and highly effective isolation of TAA and can be used for different goals, including cancer diagnosis. GFG supports have great potential for the isolation of various macromolecules utilizing specific ligands.

Antigens↗
PubMed2003

Comparison of the effect of topical fluorides on the commercially available conventional glass ionomers, resin modified glass ionomers and polyacid modified composite resins--an in vitro study.

This study was undertaken to assess the effect of a single application of three professionally applied topical fluoride agents (Sodium fluoride 2%, Stannous fluoride 8% and APF 1.23%) on the surfaces of six modern esthetic restorative materials used in pediatric dentistry viz., two conventional glass ionomers (Fuji II and Shofu-restorative), two resin modified glass ionomers (Vitremer, with and without glaze, and Photac-fil Quick) and two Polyacid modified composite resins (Luxat and Hytac Aplitip). Mean surface roughness and surface micro hardness (SMH) measurements were the parameters employed for comparison. Results showed that APF gel applications significantly increased the surface roughness measurements and decreased SMH of all tested materials, which was pronounced in conventional glass ionomers when compared with resin modified glass ionomers and polyacid modified composite resins. NaF and SnF2 produced a statistically significant increase in the surface roughness of conventional glass ionomers without any significant change in surface roughness and SMH on rest of the materials tested, except for NaF on SMH values of Fuji II, which was statistically significant.

Acidulated Phosphate Fluoride↗
PubMed2007

Ion leaching of a glass-ionomer glass: an empirical model and effects on setting characteristics and strength.

The release of ions from a glass-ionomer glass, which in the polyacid matrix effects the cross-linking and setting of a cement, can be modelled and initiated by acid-treatment in a dilute acid. This study examined the effect of time of acetic acid leaching on the working time, setting time, and strength of a model GIC. A reactive fluoride glass was immersed in hot acetic acid for 0 (control), 5, 15, 35, 65, 95 and 125 min, filtered and dried. The glass was mixed with an experimental GI liquid in a capsule system and the mixed pastes assessed for working and initial setting time. Compressive strength testing was undertaken according to ISO9917:2003. Immersion time had a significant effect on both working and setting time of the resultant pastes only up to 65 min of immersion, and corresponded with a thin-film ion diffusion model. Compressive strength did not vary significantly with immersion time. The glass-ionomer setting reaction can be conveniently retarded by immersion of the powder in acetic acid, without affecting strength. A reactivity model was developed, whereby the effects of various changes to the leaching process may be usefully examined.

Acetic Acid↗
PubMed2000

Spin glasses without time-reversal symmetry and the absence of a genuine structural glass transition

We study the three-spin model and the Ising spin glass in a field using the Migdal-Kadanoff approximation. The flows of the couplings and fields indicate no phase transition, but they show even for the three-spin model a slow crossover to the asymptotic high-temperature behavior for large values of the coupling. We have also evaluated a quantity that is a measure of the degree of non-self-averaging, and we found that it can become large for certain ranges of the parameters and the system sizes. For a spin glass in a field the maximum of non-self-averaging follows a line for given system size that resembles the de Almeida-Thouless line. We conclude that non-self-averaging found in Monte Carlo simulations cannot be taken as evidence for the existence of a low-temperature phase with replica symmetry breaking. Models similar to the three-spin model have been extensively discussed in order to provide a description of structural glasses. Their theory at mean-field level resembles the mode-coupling theory of real glasses. At that level the approach via one-step replica symmetry breaking predicts two transitions, the first transition being dynamic and the second thermodynamic. Our results suggest that in real finite-dimensional glasses there will be no genuine transitions at all, but that some features of mean-field theory could still provide some useful insights.

Journal Article↗
PubMed2001

Glass transition and density fluctuations in the fragile glass former orthoterphenyl.

High-resolution Brillouin light scattering is used to measure the dynamic structure factor of the fragile glass former orthoterphenyl (OTP) in a wide temperature range around the glass transition region and up to the boiling point. The whole set of spectra is described in terms of a phenomenological generalized hydrodynamic model. In the supercooled phase, we show the contemporary existence of the structural process, whose main features come out to be consistent with the results obtained with other spectroscopies, and of a secondary, activated process, which occurs on the 10(-11) s time scale and has a low activation energy (E(f)(a)=0.28 kcal/mol). This latter process, which is also present in the glassy phase and seems to be insensitive to the glass transition, is attributed to the coupling between the density modes and intramolecular degrees of freedom. In the normal liquid phase, the two processes merge together, and the resulting characteristic time is no longer consistent with those derived with other spectroscopies. The analysis points to the conclusion that, for what concerns the long-wavelength density fluctuations in fragile glass formers such as OTP, the universal dynamical features related to the glass transition come out clearly only in the supercooled phase and at frequencies lower than approximately 10(6) Hz.

Journal Article↗
PubMed2004

Glass-glass transition and new dynamical singularity points in an analytically solvable p-spin glasslike model.

We introduce and analytically study a generalized p-spin glasslike model that captures some of the main features of attractive glasses, recently found by mode coupling investigations, such as a glass-glass transition line and dynamical singularity points characterized by a logarithmic time dependence of the relaxation. The model also displays features not predicted by the mode coupling scenario that could further describe the attractive glasses behavior, such as aging effects with new dynamical singularity points ruled by logarithmic laws or the presence of a glass spinodal line.

Journal Article↗
PubMed1988

Histological and histomorphometrical analysis of bioactive glass and fibre reinforced bioactive glass dental root implants.

Bioactive glass has the ability to bond with bone, but it cannot be used as a load bearing device due to its limited mechanical properties. By reinforcing bioactive glass with a ductile second phase, a structurally reliable material is obtained. The aim of the present study was to evaluate histologically and morphometrically the interfacial behaviour of submerged composite dental root implants. Therefore, bulk and composite implants were subgingivally installed in the partially edentulous jaws of Beagle dogs and harvested after 4 and 16 months. Histologically, the connection between the implants and bone tissue could be clearly demonstrated. This bone connection is mainly located at the cortical bone level. In the vicinity of the infraalveolar nerve a fibrous tissue contact was found. It is shown that surgical trauma, motion at the glass to tissue interface, and gross ion dissolution from the material adversely affect the interfacial osteogenesis. If these factors are controlled, bone bonding is found over a larger area than the initial area of contact between the implant and bone tissue. This means that bone grows out along the implant surface, starting from the initial contact area. No difference was observed between the interfacial behaviour of bulk bioactive glass and intact fibre reinforced bioactive glass implants.

Animals↗
PubMed1992

A study of fracture and inelastic behavior of bioactive glass-ceramics and glasses.

The fracture and inelastic behavior of A-W glass-ceramics, phosphate glasses, silicate glasses, and borate glasses were determined in simulated body fluid (SBF), kerosene, and water. By using the stable crack growth technique, an inelastic behavior was observed on the diagram of load versus load-point displacement. From these studies, it was suggested that the inelastic behavior of bioactive glass-ceramics was produced by the plastic deformation of glassy phase on the grain boundary.

Apatites↗
PubMedDate not supplied

Probability of failure of veneered glass fiber-reinforced composites and glass-infiltrated alumina with or without zirconia reinforcement.

PURPOSE: The probability of failure under flexural load of veneered specimens of a unidirectional glass fiber-reinforced composite (FibreKor/Sculpture), a bidirectional glass fiber-reinforced composite (Vectris/Targis), a glass-infiltrated alumina (In-Ceram Alumina/Vita alpha), and a zirconia-reinforced glass-infiltrated alumina (In-Ceram Zirconia/Vita alpha) was investigated; a metal-ceramic (PG200/Vita omega) system served as a control. MATERIALS AND METHODS: Ten uniform beams of the veneered core materials were fabricated for each system and subjected to a three-point bending test. The data were analyzed using the Weibull method. The failure load of specimens at a 10% probability of failure (B10 load) was compared. The mode of failure was analyzed. RESULTS: The B10 load of the systems investigated was not significantly different from that of the metal-ceramic system. FibreKor possessed significantly higher B10 load than Vectris, In-Ceram Alumina, and In-Ceram Zirconia. The B10 strength loads of Vectris, In-Ceram Alumina, and In-Ceram Zirconia were not significantly different from one another. CONCLUSION: The probability of FibreKor to fracture under a flexural load was significantly lower than that of Vectris, In-Ceram Alumina, or In-Ceram Zirconia.

Aluminum Oxide↗
PubMed1985

The interface of various glasses and glass ceramics with a bony implantation bed.

Basing on histomorphological evaluations and morphometrical quantifications in a standardized model experiment, a comparison is made between the reactions of skeletal tissues to various glasses, glass-ceramics and enamels. On the surface of these so-called reactive biomaterials either a direct bonding to mineralized bone or also different amounts of osteoid or chondroid tissue formation can be observed, depending on the composition of the material. It is shown that the solubility of the glasses cannot directly be related to the reactivity and the resulting bone bonding; bone binds only to glasses with a controlled release of constituents and which exhibit a seam of extracellular matrix on their surface, in which normal primary mineralization can occur; the release of constituents such as Al2O3, Ta2O5, ZrO2, or phosphates from the material can inhibit this normal mineralization and the transformation of chondroid tissue to bone; if connective tissue instead of bone is present at the interface (either primarily or after bone remodelling), the dissolution (or corrosion) of the material may be no longer controllable, and the tissue reacts with a continuous inflammatory response to the corrosion products.

Animals↗
PubMed1990

[Glass ionomer cements as orthodontic bracket adhesives. An in vitro study with 4 glass ionomer cements (GIC) and 2 conventional orthodontic bracket adhesives as the comparative group].

240 orthodontic brackets were bonded to buccal surfaces of bovine teeth. As bonding material we used four glass ionomer cements without etching and two normal orthodontic bracket bonding materials with etching of enamel. Brackets of group 1 were tested with a material testing machine for shear and tensile strength after ten minutes. Brackets of group 2, 3 and 4 were tested after one day, 28 days and 98 days, respectively. In the average the bonding strength of glass ionomer cements was 50% less than the bonding strength of the comparison group with etching. The fracture of the bonding took place to 80% between the mesh base and the glass ionomer cements. Defects of the enamel surface were never observed. The bonding between mesh-base and glass ionomer cements has to be improved before the use of this bonding material can be recommended for the use in a busy practice.

Animals↗
PubMed2000

The use of marine molluskan shells for Roman glass and local raw glass production in the Eifel area (western Germany).

Relatively high strontium concentrations and their isotopic composition in Roman glass of the Imperial period indicate the general use of shells as carbonate raw material. Lead, iron, and barium concentrations and lead isotopes of glass of the late fourth century from Hambach and Gellep (western Germany) are conformable with the use of glass sand from Eifel rivers. Each of three pairs of six simultaneously operating Roman glasshouses in the Hambach area made its own raw glass from different quartz sands.

Animals↗
PubMed1992

Glass fibre versus non-glass fibre splinting bandages.

We have assessed the current range of synthetic splinting bandages, comparing glass with non-glass fabrics and plaster-of-Paris. Physical and mechanical tests have been carried out and the opinions of patients, volunteers and orthopaedic staff were recorded. Modern bandages have some better properties than standard plaster bandage but do not conform as well, are more expensive and potentially more hazardous. However, non-glass bandages are lighter, less brittle, more radiolucent and less hazardous than glass fibre bandages and are preferred by both patients and applicators.

Attitude to Health↗
PubMed2005

Effect of glass composition on the degradation properties and ion release characteristics of phosphate glass--polycaprolactone composites.

A series of polycaprolactone and ternary-based (Na(2)O)(0.55-x)(CaO)(x)(P(2)O(5))(0.45) glass composites were created, each containing 20% volume percentage of glass with various calcium compositions. A short-term degradation study was carried out to investigate the physical and ion release behaviour of these composites, utilising analytical techniques such as dynamical mechanical analysis, and ion chromatography. All the composites experienced significant loss of weight and stiffness throughout the study, with the 24 mol% calcium composites losing the greatest amount of weight and stiffness. The pH profile of the aqueous solutions in which the composites were placed were initially acidic, but began to neutralise mid-way through the study, with the 36 mol% solution achieving the most acidic conditions. The ion release behaviour mirrored the mass loss behaviour of the glass component of the composites. The cations (sodium and calcium ions) release was comparable with the initial stages of composite mass degradation, both of which exhibited almost immediate release when placed into solution. The 24 mol% composites underwent rapid rates of cation release, while the 36 mol% experienced the slowest rates of release. By contrast, anion (phosphates and polyphosphates) release showed a dissimilar trend, with rapid release of the P(2)O(7) and P(3)O(10) occurring during the first few hours in solution, whilst the P(3)O(9) structure released steadily during the first 48 h in solution. Finally, PO(4) release was at a constant rate over the duration of the study, releasing up to 300 ppm from the 32 and 36 mol% samples by the end of 200 h. To summarise, these results show that by combining phosphate glasses with biodegradable polymer, it is possible to create composites whose rate of degradation can be controlled to meet the needs of their end application.

Absorbable Implants↗
PubMed2006

Glass transition and enthalpy relaxation of amorphous lactose glass.

The glass transition temperature, T(g), and enthalpy relaxation of amorphous lactose glass were investigated by differential scanning calorimetry (DSC) for isothermal aging periods at various temperatures (25, 60, 75, and 90 degrees C) below T(g). Both T(g) and enthalpy relaxation were found to increase with increasing aging time and temperature. The enthalpy relaxation increased approximately exponentially with aging time at a temperature (90 degrees C) close to T(g) (102 degrees C). There was no significant change observed in the enthalpy relaxation around room temperature (25 degrees C) over an aging period of 1month. The Kohlrausch-Williams-Watts (KWW) model was able to fit the experimental enthalpy relaxation data well. The relaxation distribution parameter (beta) was determined to be in the range 0.81-0.89. The enthalpy relaxation time constant (tau) increased with decreasing aging temperature. The observed enthalpy relaxation data showed that molecular mobility in amorphous lactose glass was higher at temperatures closer to T(g). Lactose glass was stable for a long time at 25 degrees C. These findings should be helpful for improving the processing and storage stability of amorphous lactose and lactose containing food and pharmaceutical products.

Calorimetry, Differential Scanning↗
PubMed2006

Effect of hygroscopic expansion on the push-out resistance of glass ionomer-based cements used for the luting of glass fiber posts.

This study examined the contribution of hygroscopic expansion of glass-ionomer (GIC) and resin modified glass-ionomer (RMGIC) luting cements to the push-out resistance of fiber posts. Glass fiber posts were luted to post spaces using different cements. Experimental specimens were stored in water, while control specimens were desiccated and stored in mineral oil to eliminate water from intraradicular dentinal tubules and/or the external environment that could have contributed to hygroscopic expansion of the cements. Thin slice push-out tests revealed no difference in retention strengths of resin composite cements that were stored in water or oil. Conversely, GIC and RMGIC cements exhibited increased retention strengths after water sorption. As unfavorable cavity geometry is taxing to dentin bond integrity in root canals, a strategy that relies on increasing the frictional resistance to post dislodgement via delayed hygroscopic expansion of glass-ionomer based materials may be a more pragmatic approach to fiber post retention.

Acrylic Resins↗
PubMed1991

The biocompatibility of glass-poly(alkenoate) (Glass-Ionomer) cements: a review.

The literature describing the biocompatibility of glass-poly(alkenoate) ('Glass-Ionomer') cements has been reviewed. This literature shows that these materials have generally good biocompatibility for both dental and orthopaedic use, this latter observation being very recent. There have, though, been a few reports showing that in certain circumstances these materials may cause pulpal irritation and the reasons for these particular findings are considered. Following discussion of the biocompatibility of Glass-Ionomer cements, consideration is given to the likely underlying causes of this feature. Three factors are identified as contributing to the biocompatibility of these cements. They are: (i) minimal exotherm on setting; (ii) rapid neutralization following mixing; and (iii) slow release of ions which are generally biologically beneficial or, at least, benign. This last point is considered in some detail. Previous studies of leaching of ions from Glass-Ionomer cements have shown that only inorganic species are released. The biological effects of each of these inorganic ions are described and their influence on biocompatibility discussed.

Aluminum↗