Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Bioelectric Energy Sources”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 91 records · Page 5Linked to original sources
PubMed2005

World crop residues production and implications of its use as a biofuel.

Reducing and off-setting anthropogenic emissions of CO(2) and other greenhouse gases (GHGs) are important strategies of mitigating the greenhouse effect. Thus, the need for developing carbon (C) neutral and renewable sources of energy is more than ever before. Use of crop residue as a possible source of feedstock for bioenergy production must be critically and objectively assessed because of its positive impact on soil C sequestration, soil quality maintenance and ecosystem functions. The amount of crop residue produced in the US is estimated at 367x10(6) Mg/year for 9 cereal crops, 450x10(6) Mg/year for 14 cereals and legumes, and 488x10(6) Mg/year for 21 crops. The amount of crop residue produced in the world is estimated at 2802x10(6) Mg/year for cereal crops, 3107x10(6) Mg/year for 17 cereals and legumes, and 3758x10(6) Mg/year for 27 food crops. The fuel value of the total annual residue produced is estimated at 1.5x10(15) kcal, about 1 billion barrels (bbl) of diesel equivalent, or about 8 quads for the US; and 11.3x10(15) kcal, about 7.5 billion bbl of diesel or 60 quads for the world. However, even a partial removal (30-40%) of crop residue from land can exacerbate soil erosion hazard, deplete the SOC pool, accentuate emission of CO(2) and other GHGs from soil to the atmosphere, and exacerbate the risks of global climate change. Therefore, establishing bioenergy plantations of site-specific species with potential of producing 10-15 Mg biomass/year is an option that needs to be considered. This option will require 40-60 million hectares of land in the US and about 250 million hectares worldwide to establish bioenergy plantations.

Agriculture↗
PubMed2000

AC coupled three op-amp biopotential amplifier with active DC suppression.

A three op-amps instrumentation amplifier (I.A) with active dc suppression is presented. dc suppression is achieved by means of a controlled floating source at the input stage, to compensate electrode and op-amps offset voltages. This isolated floating source is built around an optical-isolated device using a general-purpose optocoupler, working as a photovoltaic generator. The proposed circuit has many interesting characteristics regarding simplicity and cost, while preserving common mode rejection ratio (CMRR) and high input impedance characteristics of the classic three op-amps I.A. As an example, a biopotential amplifier with a gain of 80 dB, a lower cutoff frequency of 0.1 Hz, and a dc input range of +/- 8 mV was built and tested. Using general-purpose op-amps, a CMRR of 105 was achieved without trimmings.

Action Potentials↗
PubMed2005

Emissions from small-scale energy production using co-combustion of biofuel and the dry fraction of household waste.

In sparsely populated rural areas, recycling of household waste might not always be the most environmentally advantageous solution due to the total amount of transport involved. In this study, an alternative approach to recycling has been tested using efficient small-scale biofuel boilers for co-combustion of biofuel and high-energy waste. The dry combustible fraction of source-sorted household waste was mixed with the energy crop reed canary-grass (Phalaris Arundinacea L.), and combusted in both a 5-kW pilot scale reactor and a biofuel boiler with 140-180 kW output capacity, in the form of pellets and briquettes, respectively. The chlorine content of the waste fraction was 0.2%, most of which originated from plastics. The HCl emissions exceeded levels stipulated in new EU-directives, but levels of equal magnitude were also generated from combustion of the pure biofuel. Addition of waste to the biofuel did not give any apparent increase in emissions of organic compounds. Dioxin levels were close to stipulated limits. With further refinement of combustion equipment, small-scale co-combustion systems have the potential to comply with emission regulations.

Air Pollutants↗
PubMed2005

Co-digestion of energy crops and the source-sorted organic fraction of municipal solid waste.

The biological and technical performance during co-digestion of energy crops and the source-sorted organic fraction of municipal solid waste has been investigated at laboratory and pilot scale. A 50:50 (TS-based) mixture of energy crops and organic waste reached a loading rate of 6.0 gVS L(-1)d(-1) with a methane yield of 0.33-0.38 LgVS(-1), while a 80:20 mixture showed elevated levels of volatile fatty acids at 5.5 gVS L(-1)d(-1) The better performance of the 50:50 mixture can partly be explained by a better nutritional composition. Mincing the ley crop reduced viscosity and reduced problems with fibre floating and scum-blanket formation. The electricity consumed for mincing and stirring at a full-scale plant corresponds to ca 3% of the energy produced. Calculations of the costs for full-scale plants indicate that the price of the upgraded biogas has to be at least 0.078 Euro/kWh in order to balance the costs.

Agriculture↗
PubMed2002

The health impacts of exposure to indoor air pollution from solid fuels in developing countries: knowledge, gaps, and data needs.

Globally, almost 3 billion people rely on biomass (wood, charcoal, crop residues, and dung) and coal as their primary source of domestic energy. Exposure to indoor air pollution (IAP) from the combustion of solid fuels is an important cause of morbidity and mortality in developing countries. In this paper, we review the current knowledge on the relationship between IAP exposure and disease and on interventions for reducing exposure and disease. We take an environmental health perspective and consider the details of both exposure and health effects that are needed for successful intervention strategies. We also identify knowledge gaps and detailed research questions that are essential in successful design and dissemination of preventive measures and policies. In addition to specific research recommendations, we conclude that given the interaction of housing, household energy, and day-to-day household activities in determining exposure to indoor smoke, research and development of effective interventions can benefit tremendously from integration of methods and analysis tools from a range of disciplines in the physical, social, and health sciences.

Activities of Daily Living↗
PubMed2005

Fermentative hydrogen production in a system using anaerobic digester sludge without heat treatment as a biomass source.

Hydrogen produced from anaerobic fermentation of organic matter is a sustainable energy source. Anaerobic hydrogen-producing systems have been typically seeded with heat-treated inocula to eliminate hydrogen-consuming methanogens. This can be both energy- and economically-intensive. In this work, operational parameters were modified to determine if operating a reactor at low pH (5.5) and low SRT (10 hours) would result in a hydrogen-producing system free of methanogens using anaerobic digester sludge with no heat treatment as an inoculum. Initially, the reactor exhibited a hydrogen productivity of approximately 7.9% when fed glucose. After purging was begun with 10% CO2/90% N2, the hydrogen productivity increased to > 20% for the first day. Hydrogenotrophic methanogens then established themselves in the reactor, reducing the hydrogen productivity in the second non-purged phase by 80%. The operational controls examined were not sufficient to eliminate hydrogen-consuming methanogens for longer than approximately one week, and thus further methods must be developed.

Acetates↗
PubMed2002

The emission soot of biomass fuels combustion as a source of endocrine disrupters.

Emissions of biomass fuel combustion in residential stove from Chinese countryside were analyzed to determine the endocrine disrupters by using recombinant yeast bioassay. The results showed that there were significant steroid modulating activities found in combustion soot of five kinds of biomass fuels, which were wood, crop residue, grass, bush and rice straw. The steroid activities in the different sub-fractions from chromatographic separation were also determined, and the results indicated that polar fraction extracted by methanol and aromatic fraction extracted by benzene had relatively high steroid activities, and aliphatic fraction almost had no activity. The GC/MS results showed that polycyclic aromatic compounds and their derivatives, substituted phenolic compounds and their derivatives, aromatic carbonyl compounds, and higher molecular weight alcohols and ketones may be the main steroid disrupters in these soots.

Air Pollutants↗
PubMed2001

Pyrolytic characteristics of microalgae as renewable energy source determined by thermogravimetric analysis.

Two kinds of autotrophic microalgae, Spirulina platensis (SP) and Chlorella protothecoides (CP) were pyrolyzed at the heating rates of 15, 40, 60 and 80 degrees C/min up to 800 degrees C in a thermogravimetric analyzer to investigate their pyrolytic characteristics. Three stages (dehydration, devolatilization and solid decomposition) appeared in the pyrolysis process. SP and CP mainly devolatilized at 190-560 degrees C and 150-540 degrees C, respectively. A total volatile yield of about 71% was achieved from each microalga. As the heating rate increased, a lateral shift to higher temperatures was observed in their thermograms, and the instantaneous maximum and average reaction rates in the devolatilization stage were increased while the activation energy was decreased. The value of activation energy for CP pyrolysis was 4.22-5.25 x 10(4), lower than that of SP (7.62-9.70 x 10(4)), and the char in final residue of CP was 14.00-15.14%, less than that of SP by 2-3%. This indicated that CP is preferable for pyrolysis over SP. The experimental results may provide useful data for the design of pyrolytic processing systems using planktonic microalgae as feedstock.

Bioelectric Energy Sources↗
PubMed2006

Electricity-producing bacterial communities in microbial fuel cells.

Microbial fuel cells (MFCs) are not yet commercialized but they show great promise as a method of water treatment and as power sources for environmental sensors. The power produced by these systems is currently limited, primarily by high internal (ohmic) resistance. However, improvements in the system architecture will soon result in power generation that is dependent on the capabilities of the microorganisms. The bacterial communities that develop in these systems show great diversity, ranging from primarily delta-Proteobacteria that predominate in sediment MFCs to communities composed of alpha-, beta-, gamma- or delta-Proteobacteria, Firmicutes and uncharacterized clones in other types of MFCs. Much remains to be discovered about the physiology of these bacteria capable of exocellular electron transfer, collectively defined as a community of "exoelectrogens". Here, we review the microbial communities found in MFCs and the prospects for this emerging bioenergy technology.

Bacteria↗
PubMed2003

Thermal efficiency and environmental performances of a biogas-diesel stationary engine.

Municipal and agricultural waste, and sludge from wastewater treatment represent a large source of pollution. Gaseous fuels can be produced from waste decomposition and then used to run internal combustion engines for power and heat generation. The present paper focuses on thermal efficiency and environmental performances of dual-fuel engines fuelled with biogas. Experiments have been carried out on a Lister-Petter single cylinder diesel engine, modified for dual-fuel operation. Natural gas was first used as the primary fuel. An empirical correlation was determined to predict the engine load for a given mass flow rate for the pilot fuel (diesel) and for the primary fuel (natural gas). That correlation has then been tested for three synthesized biogas compositions. Computations were performed and the error was estimated to be less than 10%. Additionally, NOx and CO2 contents were measured from exhaust gases. Based on exhausts gas temperature, the activation energy and the pre-exponential factor of an Arrhenius law were then proposed, resulting in a simpler mean to predict NOx.

Bioelectric Energy Sources↗
PubMed2005

Molecular characterization and hydrogen production of a new species of anaerobe.

For the fermentative hydrogen production process with carbohydrates, isolation and identification of hydrogen-producing bacteria (HPB) with high yield and high evolution rate are very important. Improved Hungater rolling tube technique and plate method of culture bottle (PMCB) were used to enumerate and isolate the HPB. The HPB-Li and Ren (HPB-LR) medium was designed to inoculate and isolate HPB under temperature of 37 degrees C and pH of 4.0-6.7. In this study, an isolate of HPB with high yield and high evolution rate was isolated, named Rennanqilyf3 (R3), which is a gram-positive, straight rod, non-spore forming, encapsulated, strict anaerobe, with long peritrichous flagella and three to four metachromatic granules. It performs ethanol-type fermentation, and glucose is its optimum carbon source for hydrogen production. The 16S rDNA sequencing of the R3 isolate indicated that it might be a new species. The hydrogen production capacity of the R3 isolate varied with the glucose concentration and pH. The optimum glucose concentration was 12.0 g/L (with H2 yield of 58.6 mmolH2/L-culture) and the optimum initial pH was 5.5 (with H2 yield of 34.2 mmolH2/L-culture). The maximum rate of cell proliferation were 0.46 and 0.63 g/L when glucose concentration was 15.0 g/L and pH was 5.5, respectively. The maximum yields of ethanol and acetic acid were achieved when the glucose concentration was 12.0 g/L and the pH was 5.5.

Bacteria, Anaerobic↗
PubMed2002

Combustion sources of particles: 2. Emission factors and measurement methods.

Emissions from the combustion of biomass and fossil fuels are a significant source of particulate matter (PM) in ambient outdoor and/or indoor air. It is important to quantify PM emissions from combustion sources for regulatory and control purposes in relation to air quality. In this paper, we review emission factors for several types of important combustion sources: road transport, industrial facilities, small household combustion devices, environmental tobacco smoke, and vegetation burning. We also review current methods for measuring particle physical characteristics (mass and number concentrations) and principles of methodologies for measuring emission factors. The emission factors can be measured on a fuel-mass basis and/or a task basis. Fuel-mass based emission factors (e.g., g/kg of fuel) can be readily used for the development of emission inventories when the amount of fuels consumed are known. Task-based emission factors (g/mile driven, g/MJ generated) are more appropriate when used to conduct comparisons of air pollution potentials of different combustion devices. Finally, we discuss major shortcomings and limitations of current methods for measuring particle emissions and present recommendations for development of future measurement techniques.

Air Pollutants↗
PubMed2003

Electricity generation by direct oxidation of glucose in mediatorless microbial fuel cells.

Abundant energy, stored primarily in the form of carbohydrates, can be found in waste biomass from agricultural, municipal and industrial sources as well as in dedicated energy crops, such as corn and other grains. Potential strategies for deriving useful forms of energy from carbohydrates include production of ethanol and conversion to hydrogen, but these approaches face technical and economic hurdles. An alternative strategy is direct conversion of sugars to electrical power. Existing transition metal-catalyzed fuel cells cannot be used to generate electric power from carbohydrates. Alternatively, biofuel cells in which whole cells or isolated redox enzymes catalyze the oxidation of the sugar have been developed, but their applicability has been limited by several factors, including (i) the need to add electron-shuttling compounds that mediate electron transfer from the cell to the anode, (ii) incomplete oxidation of the sugars and (iii) lack of long-term stability of the fuel cells. Here we report on a novel microorganism, Rhodoferax ferrireducens, that can oxidize glucose to CO(2) and quantitatively transfer electrons to graphite electrodes without the need for an electron-shuttling mediator. Growth is supported by energy derived from the electron transfer process itself and results in stable, long-term power production.

Bioelectric Energy Sources↗
PubMedDate not supplied

Indoor air pollution from biomass fuels and respiratory health of the exposed population in Nepalese households.

A cross-sectional assessment of indoor air quality in Nepal and its health effects revealed that solid biomass fuels (animal dung, crop residue, and wood) were the main sources of indoor air pollution affecting health. The average smoke level (PM10) in kitchens using biomass fuels was about three times higher than that in those using cleaner fuels (kerosene, LPG, and biogas). Respondents in 98 randomly selected households included 168 who cooked daily meals, of whom 94% were disadvantaged women. Biomass smoke caused significantly more respiratory disorders than did cleaner fuels. Categorized data analysis demonstrated significant associations between biomass smoke pollution and respiratory symptoms such as cough; phlegm; breathlessness; wheezing; and chronic respiratory diseases such as COPD and asthma. The prevalences of respiratory illnesses and symptoms were considerably higher in those living in mud and brick houses compared with concrete houses. Prevalences were also higher in those living on hills and in rural areas compared with flatland and urban areas.

Adolescent↗
PubMedDate not supplied

Mechanical advantage of skeletal muscle as a cardiac assist power source.

The insertion of unconditioned latissimus dorsi muscle at the humerus was reattached in anesthetized goats to the first stage piston of a two stage mechanical-to-hydraulic energy convertor for a skeletal muscle powered ventricular assist device. To study a range of forces, pistons of different cross sectional areas were evaluated during thoracodorsal nerve stimulation. Each energy convertor piston was coupled hydraulically to an actuator on a Thoratec VAD (Thoratec Laboratories, Berkeley, CA) in a mock circulatory loop. Maximum force (70.1 +/- 10.8 N) was greatest for the largest piston, and stroke length (4.0 +/- 0.7 cm) was greatest for the smallest piston. However, maximum stroke work (1.2 +/- 0.5 J) and muscle powered VAD ejected stroke volume (45 +/- 17 ml) were greatest for the middle size piston. These results are consistent with a biomechanical model of whole muscle contraction that predicts that there is an optimum force that produces maximum cycle work. Thus, with a two stage energy convertor, by changing the ratio of the cross sectional areas of the energy convertor and muscle powered VAD actuator pistons, the effective mechanical advantage for the muscle can be optimized to produce more work output and muscle powered VAD flow. Skeletal muscle powered devices using such an energy convertor could provide completely implantable circulatory support free from batteries and other power conditioning hardware required with electromechanical systems.

Animals↗
PubMedDate not supplied

Capturing in situ skeletal muscle power for circulatory support: a new approach to device design.

Efforts to harness in situ skeletal muscle for circulatory support have been extensive, but implants designed to tap this power source have yet to meet the strict performance standards incumbent upon such devices. A fourth generation muscle energy converter (MEC4) is described that represents a significant departure from previous hydraulic muscle pump designs, all of which have assumed a long cylindrical profile. The MEC4, in contrast, features a puck shaped metallic bellows oriented so that its end fittings lie parallel to the chest wall. The fixed end is centered over a fluid port that passes into the thoracic cavity across one resected rib. The opposite end of the bellows supports a roller bearing that moves beneath a linear cam fixed to a reciprocating shaft. The shaft exits the housing through a spring loaded seal and is attached to a sintered anchor pad for muscle tendon fixation. This configuration was chosen to improve bellows durability, lower device profile, and reduce tissue encumbrance to actuator recoil. Bench tests show that modest actuation forces can effect full actuator displacement in 0.25 seconds against high pressure loads, transmitting up to 0.9 J/stroke at 60% efficiency. In vitro tests also confirm that key device performance parameters can be computed from pressure readings transmitted via radiotelemetry, clearing the way for long-term implant studies in conscious animals.

Bioelectric Energy Sources↗
PubMed1994

Bioelectric signals in neurons structures and the Josephson effect.

In a series of experiments, a zero damped oscillating and rotating pendulum held in a human hand is identified as a source of geomagnetic field modulation. Its rotating periodical movement is believed to result from feedback interaction with sensing systems of the human body. Such a pendulum features extraordinary sensitivity and periodical responses are typical for sensors based on the Josephson effect. Experimentally measured functional relations of signals in neuron structures of living organisms are directly compared with typical signals occurring in superconductive structures with Josephson junctions. Basic properties of Josephson elements (e.g. the quantization of magnetic flux in SQUID sensors) which are directly linked to impulse signals measured in some network structures containing Josephson junctions are then analyzed. Referring to time response measures on neuron cells and comparing it to Josephson element characteristics, its highly analogous behaviour is emphasized and reasons for hysteresis of heat and cold sensors are explained. A complete set of topological parameters needed for establishing conditions that bring about quantum coherence phenomena in biological structures is introduced. Additional studies and trends for future neurophysical research in this field are recommended.

Animals↗
PubMed2005

Contribution of biomass burning to atmospheric polycyclic aromatic hydrocarbons at three European background sites.

Radiocarbon analysis of atmospheric polycyclic aromatic hydrocarbons (PAHs) from three background areas in Sweden, Croatia, and Greece was performed to apportion their origin between fossil and biomass combustion. Diagnostic ratios of PAHs implied that wood and coal combustion was relatively more important in the northern European site, while combustion of fossil fuels was the dominant source of PAHs to the two central-southern European background sites. The radiocarbon content (delta14C) of atmospheric PAHs in Sweden ranged between -388 per thousand and -381 per thousand, while more depleted values were observed for Greece (-914 per thousand) and Croatia (-888 per thousand). Using a 14C isotopic mass balance model it was calculated that biomass burning contributes nearly 10% of the total PAH burden in the studied southern European atmosphere with fossil fuel combustion making up the 90% balance. In contrast, biomass burning contributes about 50% of total PAHs in the atmosphere at the Swedish site. Our results suggest that the relative contributions of biomass burning and fossil fuels to atmospheric PAHs may differ considerably between countries, and therefore, different national control strategies might be needed if a further reduction of these pollutants is to be achieved on a continental-global scale.

Air Pollutants↗