Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Microscopy, Ultraviolet”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 883 records · Page 49Linked to original sources

Disinfection of surfaces by photocatalytic oxidation with titanium dioxide and UVA light.

Particularly in microbiological laboratories and areas in intensive medical use, regular and thorough disinfection of surfaces is required in order to reduce the numbers of bacteria and to prevent bacterial transmission. The conventional methods of disinfection with wiping are not effective in the longer term, cannot be standardized, are time- and staff-intensive and use aggressive chemicals. Disinfection with hard ultraviolet C (UVC) light is usually not satisfactory, as the depth of penetration is inadequate and there are occupational medicine risks. Photocatalytic oxidation on surfaces coated with titanium dioxide (TiO2) might offer a possible alternative. In the presence of water and oxygen, highly reactive OH-radicals are generated by TiO2 and mild ultraviolet A (UVA). These radicals are able to destroy bacteria, and may therefore be effective in reducing bacterial contamination. Direct irradiation with UVC however can produce areas of shadow in which bacteria are not inactivated. Using targeted light guidance and a light-guiding sheet (out of a UVA-transmittant, Plexiglas, for example), as in the method described in the present study, bacterial inactivation over the entire area is possible. The effectiveness of the method was demonstrated using bacteria relevant to hygiene such as Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus and Enterococcus faecium. For these bacteria, a reduction efficiency (RE) more than 6log10 steps in 60 min was observed. Using Candida albicans, a RE of 2log10 steps in 60 min was seen. Light and scanning electron microscopic examinations suggest that the germ destruction achieved takes place through direct damage to cell walls caused by OH-radicals.

Bacteria↗

An in vitro model to test relative antioxidant potential: ultraviolet-induced lipid peroxidation in liposomes.

Since antioxidants have been shown to play a major role in preventing some of the effects of aging and photoaging in skin, it is important to study this phenomenon in a controlled manner. This was accomplished by developing a simple and reliable in vitro technique to assay antioxidant efficacy. Inhibition of peroxidation by antioxidants was used as a measure of relative antioxidant potential. Liposomes, high in polyunsaturated fatty acids (PUFA), were dispersed in buffer and irradiated with ultraviolet (UV) light. Irradiated liposomes exhibited a significantly higher amount of hydroperoxides than liposomes containing antioxidants in a dose- and concentration-dependent manner. Lipid peroxidation was determined spectrophotometrically by an increase in thiobarbituric acid reacting substances. To further substantiate the production of lipid peroxides, gas chromatography was used to measure a decrease in PUFA substrate. In order of decreasing antioxidant effectiveness, the following results were found among lipophilic antioxidants: BHA greater than catechin greater than BHT greater than alpha-tocopherol greater than chlorogenic acid. Among hydrophilic antioxidants, ascorbic acid and dithiothreitol were effective while glutathione was ineffective. In addition, ascorbic acid was observed to act synergistically with alpha-tocopherol, which is in agreement with other published reports on the interaction of these two antioxidants. Although peroxyl radical scavengers seem to be at a selective advantage in this liposomal/UV system, these results demonstrate the validity of this technique as an assay for measuring an antioxidant's potential to inhibit UV-induced peroxidation.

Antioxidants↗

Development of a purified cholera toxoid. I. Purification of toxin.

The enterotoxin from Vibrio cholerae is selectively concentrated from cell-free culture supernatant by co-precipitation with hexametaphosphate and is further purified by adsorption on aluminum hydroxide powder. The bulk of residual somatic antigen becomes insoluble upon lyophilization of the toxin preparation and is removed by centrifugation of the rehydrated material. Other contaminants are eliminated by treatment with activated carbon. Preparations of toxin, purified by this method, have been characterized by: (i) a single immunoprecipitin line against polyvalent antisera; (ii) homogeneity on acrylamide gels; (iii) specific activities on the order of 22 limit-of-bluing doses/mug; (iv) ultraviolet spectra characteristic of pure protein; and (v) overall yields on the order of 50%, irrespective of purification scale. Such preparations, however, have been shown to contain trace amounts of somatic antigen when they are intensively tested either for their ability to elevate serum vibriocidal antibody titers in immunized rabbits or for their ability to increase resistance of immunized mice to live vibrio challenge. In the latter test system, the level of residual somatic antigen per 50 mug of toxin (toxoid) antigen generally did not exceed 0.025% of the Division of Biological Standards reference vaccine, V. cholerae Inaba IN-12. Methods for elimination of this small amount of somatic antigen have been investigated and are discussed. The particular combination of purification steps which are presently described have been easily and reproducibly applied on a production scale to prepare gram amounts of toxin with a high degree of purity, even under a variety of initial conditions.

Adsorption↗

Fine structural dependence of ultraviolet reflections in the King Penguin beak horn.

The visual perception of many birds extends into the near-ultraviolet (UV) spectrum and ultraviolet is used by some to communicate. The beak horn of the King Penguin (Aptenodytes patagonicus) intensely reflects in the ultraviolet and this appears to be implicated in partner choice. In a preliminary study, we recently demonstrated that this ultraviolet reflectance has a structural basis, resulting from crystal-like photonic structures, capable of reflecting in the near-UV. The present study attempted to define the origin of the photonic elements that produce the UV reflectance and to better understand how the UV signal is optimized by their fine structure. Using light and electron microscopic analysis combined with new spectrophotometric data, we describe here in detail the fine structure of the entire King Penguin beak horn in addition to that of its photonic crystals. The data obtained reveal a one-dimensional structural periodicity within this tissue and demonstrate a direct relationship between its fine structure and its function. In addition, they suggest how the photonic structures are produced and how they are stabilized. The measured lattice dimensions of the photonic crystals, together with morphological data on its composition, permit predictions of the wavelength of reflected light. These correlate well with experimentally observed values. The way the UV signal is optimized by the fine structure of the beak tissue is discussed with regard to its putative biological role.

Animal Communication↗

Lysogenic strains of group N lactic streptococci.

A temperate bacteriophage, designated r(1)t, was inducible from the group N lactic streptococcus, Streptococcus cremoris R(1), by ultraviolet irradiation or mitomycin C treatment. Induced lysates produced plaques on lawns of three closely related S. cremoris strains, AM(1), SK(11), and US(3). Strain SK(11) was readily lysogenized. S. cremoris AM(1) was the most reliable indicator strain, although the age of the culture used for seeding plates was critical. Zones of lysis but no plaque formation were observed on lawns of nine additional S. cremoris strains. Phage r(1)t could not be detected in filtrates of stationary-phase R(1) cultures and was near the limits of detection in logarithmically growing cultures. Phage levels were still very low (1 plaque-forming unit on AM(1) per 10 induced cells) in induced lysates of R(1) cultures. These low levels of detectable phage may be attributable to an inadequate indicator, lysogenization of the indicator, adsorption of induced phage to cellular debris, concurrent induction of other undetectable phages, or the production of high proportions of defective phages. Electron micrographs of induced R(1) lysates revealed a high incidence of incomplete phage particles, fragments, and ghosts.

Bacteriophages↗

Microfabricated surface designs for cell culture and diagnosis.

Grooved and holed surfaces with a well fabricated design may serve as microsubstrates for cell culture and microreactors for diagnosis. In this study, the authors prepared chemically treated, micrometer scale grooved and holed glass surfaces by combined surface modification and ultraviolet (UV) excimer laser ablation techniques, as follows. 1) Microcell-culture substrate: Amino group attached glass surfaces, prepared by the treatment with an aminopropylsilane, were condensed with a carboxylated radical initiator. Subsequently, polyacrylamide was grafted by surface initiated radical polymerization to create a very hydrophilic surface layer. Ultraviolet excimer laser beams (KrF: 248 nm) were irradiated through a microscope onto surfaces to create grooves or holes that were 10 and 50 microns in width or diameter, respectively. The depth, depending on the irradiation light strength, ranged from a few to several tenths of a micrometer. On endothelial cell (EC) seeding, ECs adhered and grew on the bottoms of the grooved or holed surface where glass was exposed on ablation. Little cell adhesion was observed on non ablated, grafted surfaces. Endothelial cells aligned along the groove, resulting in very narrow tube like tissue formation, whereas ECs tended to form a multilayered spherical aggregate in a hole. A single cell resided in a 10 microns square hole. 2) Microreactor for diagnosis: The glass surface, treated with a fluorinated silane, was ablated to create round holes. On addition of a few microliters of water, water could be quantitatively transferred into a hole because of the water repellent characteristics of non ablated, fluorinated glass. As a model of a microreactor, enzyme reactions to affect different levels of glucose were carried out in tiny holed surfaces.

Acrylic Resins↗

Solubility and intrinsic dissolution rate of alprazolam crystal modifications.

The purpose of the study was to determine the solubility and the intrinsic rates of dissolution of three crystal modifications, two anhydrate, and one dihydrate of alprazolam, a 1,4-benzodiazepine derivative. Solubility was determined by ultraviolet spectrophotometry at different levels of pH, and intrinsic dissolution rates were determined by a rotating disk method. The apparent solubility of alprazolam crystal modifications was dependent on pH, being 8-10 mg/ml at pH 1.6 and 0.1 mg/ml at pH 5.0. The apparent solubility values for the anhydrate forms were similar, whereas the hydrate form showed lower apparent solubility at each pH. The mean intrinsic rates of dissolution for the anhydrate forms were 16 and 18 micrograms cm-2 min-1, and for the dihydrate modification 21 micrograms cm-2 min-1 at 50 rpm, respectively. At 75 rpm, the corresponding values were 22, 22, and 27 micrograms cm-2 min-1. The rate of intrinsic dissolution was also dependent on the pH. It can be concluded that the apparent solubility and the intrinsic dissolution rate of the anhydrate and hydrate forms were different. The obtained apparent solubility values at different levels of pH for the water-solvated crystal modification were evidently lower than those of the two anhydrate forms studied. Furthermore, the intrinsic rate of dissolution was significantly (p < 0.05) higher for the hydrate form of alprazolam.

Alprazolam↗

Hair color changes and protein damage caused by ultraviolet radiation.

Ultraviolet and visible radiations are known to damage hair. However, quantitative data relating damage to hair type, proteins and color to the radiation wavelength are missing. We studied the effect of UV plus visible, UVA plus visible, visible mercury-vapor lamp radiation and sunlight on (blended) virgin dark-brown, blond and red hair and (one head) virgin black and curly dark-brown hair. All hair types showed a substantial increase in protein loss in water after lamp and sun irradiation. The damaging effect of UVB was about 2-5 times higher than that of UVA plus visible radiation, depending on the hair type. Significant color changes were also observed in every hair type, after lamp and sun irradiation, being more pronounced for the light colored hairs. The luminosity difference parameter was the major contributor to the hair color changes, but significant changes in the red-green and yellow-blue parameters of every hair were observed. In this case, the damaging effect is ascribable mainly to UVA radiation. No significant changes in the mechanical properties or topography were observed in any case. We discuss these results in terms of hair type and composition and melanin types.

Color↗

Ultraviolet wavelength dependence of photomorphological and photosynthetic responses in Brassica napus and Arabidopsis thaliana.

Among the photomorphological responses in plants induced by ultraviolet-B radiation (UVB; 290 nm-320 nm) are leaf asymmetry, leaf thickening and cotyledon curling. We constructed an action spectrum of cotyledon curling in light-grown Brassica napus to characterize the UVB photoreceptor that initiates this response. Cotyledon curling was also characterized in Arabidopsis thaliana. Peak efficiency for this response occurred between 285 and 290 nm. Additionally, UVB-induced changes in epidermal cells from A. thaliana cotyledons were assessed because they are the likely site of UVB photoreception that leads to curling. Investigation of cellular structure, chlorophyll a fluorescence and chlorophyll concentration indicated that cotyledon curling is not concomitant with gross cellular damage or inhibition of photosynthesis, which only occurred in response to wavelengths <280 nm. Many UVB effects are apparently an indirect consequence of UVB radiation, dependent on UVB-mediated increases in reactive oxygen species (ROS) that either act as a signal in the UVB transduction pathway or cause oxidative damage. The cotyledon curling response was impeded by ascorbate and cystine, ROS scavengers and was promoted by H(2)O(2), a ROS. We suggest that following absorption by a UVB chromophore, ROS are generated via photosensitization, ultimately leading to cotyledon curling.

Antioxidants↗

Morphological study of dentin irradiated by solid-state ultraviolet lasers: a comparison of wavelength and repetition rate.

OBJECTIVE: In this study, we examined the surface morphology of dentin after being ablated by the third, fourth, and fifth harmonics of the Nd:YAG laser. The influences of the repetition rate with respect to the wavelength were also investigated. BACKGROUND DATA: Typically, excimer lasers have been used as the primary sources of ultraviolet (UV) laser wavelengths to investigate laser ablation of dentin. In the past decade, developments in nonlinear optical technology have given rise to higher conversion efficiencies of the fourth and fifth harmonics of the Nd:YAG laser. To this end, sufficient energy densities of the fourth and fifth harmonics of the Nd:YAG laser have been generated to ablate dentin. MATERIALS AND METHODS: Thin dentin samples (typically 1 mm) were irradiated by the third, fourth, and fifth harmonics of the Nd:YAG laser. Ablation occurred at repetition rates of 1, 5, 10, and 20 Hz, using similar energy densities for each laser wavelength. An environmental scanning electron microscope was used to assess the resultant surface morphology. RESULTS: Dentine surfaces after 355-nm ablation exhibited plugging at each repetition rate. Similar surfaces were exhibited after 266-nm ablation. "Plugging" over dentine tubules was less obvious after 213-nm laser ablation. The results may highlight the impact of different absorption characteristics of each wavelength. CONCLUSION: Solid-state UV laser ablation of dentin exhibits similar properties to excimer laser ablation. At similar energy densities, the deeper UV laser wavelengths exhibit less "plugging" of dentin tubules, suggesting a lower thermal impact.

Dentin↗

[Ultrastructure of the interphase nucleoli of pig embryonic kidney cells during their compensatory hypertrophy and degradation due to local UV microirradiation].

As shown elsewhere, the ultraviolet (UV) irradiation of one of the two nucleoli of the interphase cell nucleus results in inactivation and degradation of the irradiated nucleus and in the compensatory growth and activation of the nonirradiated one. In the present work we studied the ultrastructure of degraded and hypertrophied nucleoli in PK-cells with the aid of serial ultrathin sections. The compensatory hypertrophy of the nucleoli was shown to be accompanied by a significant increase in the number of fibrillar centers (FC) and a decrease in their linear size compared with the control ones; in the degraded nucleoli, the FCs number went down, while the size of FCs increased. Overall, the structural changes of the degraded nucleoli upon their UV microirradiation corresponded to those caused by the action of other known inhibitors of rRNA. The capacity of nucleoli for compensatory hypertrophy indicates that apart from the operating ribosomal genes, the cell also contains latent r-genes which may be activated under extreme conditions so as to sustain the required level of rRNA synthesis. It is suggested that such an activation is accompanied by a "fragmentation" of the original FCs into smaller and more numerous ones.

Animals↗

DNA in psoriatic epidermis.

An electron microscopic technique has been used to visualize crosslinks after total denaturation on DNA isolated from epidermis and dermis in patients with psoriasis treated with 8-methoxypsoralen (8-MOP) and irradiation with ultraviolet light at 360 nm (PUVA treatment). This technique facilitated accurate measurements of the number and density of DNA interstrand crosslinks. 30 biopsies from 14 patients were studied and a total of 9503 DNA molecules were scored in the electron-microscope, 6 patients were treated topically with 8-MOP and 10 were on systemic treatment. Two of the patients on topical treatment had previously been on systemic treatment. 1% of all DNA molecules contained 3 or more cross-links. The overall frequency of cross-links was almost identical in the epidermis (1.1%) and in the dermis (0.9%) and, furthermore, virtually the same in patients on topical and systemic PUVA treatment. The total number of crosslinks was of the same magnitude as that previously found in normal human skin. (V. Bohr et al., Acta Dermatovener, in press.) No significantly increased damage of the genetic material (DNA) was demonstrated in our study as a consequence of the PUVA treatment using 8-MOP. We have previously shown (V. Bohr & A. Lerche, Biochim Biophys Acta, in press) that 8-MOP induced crosslinks after irradiation at 360 nm in an in vitro system of pure DNA. In this system a correlation was established between the density of crosslinks formed and irradiation time, concentration of 8-MOP, and irradiation intensity.

DNA↗

Morphological response of human rotavirus to ultra-violet radiation, heat and disinfectants.

The morphological damage induced in human rotavirus particles by exposure to ultraviolet (UV) radiation at a wavelength of 254 nm increased progressively with length of treatment. Exposure of the virus in suspension to 9000 ergs/cm2/s was sufficient to remove the smooth capsid layer from 50% of particles after 1 min and from all the virions within 10 min. By this time, the number of stain-penetrated or empty particles increased markedly, along with the appearance of virus-derived debris in the form of disrupted and isolated capsomeres. After treatment for 120 min no intact virus particles were observed. The action of wet (100 degrees C) or dry (60 degrees C) heat resulted in changes similar to those effected by UV radiation, with a rapid loss of viral outer capsid shell from the virions followed by stain penetration and disintegration of particles. Sodium hypochlorite, cetrimide and 70% ethanol induced a rapid loss of the outer capsid layer, but, compared with UV radiation or heat, a slower increase in the number of stain-penetrated particles was noted. This was particularly evident with cetrimide. Chlorhexidine and phenol had effects on virus structure only after extended periods of exposure, whilst glutaraldehyde treatment had little influence on virus morphology. Glutaraldehyde 2% v/v would appear to be most suitable for the disinfection of rotavirus-containing electronmicroscope grids before their examination.

Cetrimonium↗

E-cadherin and its downstream catenins are proteolytically cleaved in human HaCaT keratinocytes exposed to UVB.

It has been reported that ultraviolet B (UVB) irradiation causes the loss of E-cadherin of melanocytes, leading them to escape from neighboring keratinocytes during melanoma development. However, little has been paid on its effect on E-cadherin of keratinocytes. In the present study we therefore focus on whether UVB affects expression of E-cadherin-catenin complex in human HaCaT keratinocytes. We found that E-cadherin, beta-, and gamma-catenin but not alpha-catenin were proteolytically cleaved in UVB-irradiated HaCaT keratinocytes. The effect was only observed in keratinocyte undergoing apoptosis. Cleavage of beta- and gamma-catenin was fully abolished by caspase-3 and caspase-8 inhibitors, whereas cleavage of E-cadherin was inhibited by neither caspase nor metalloproteinase inhibitors. Functional analysis showed that the cleavage resulted in the disruption of the physical association between E-cadherin and catenins, indicating that E-cadherin signaling was compromised in UVB-irradiated HaCaT keratinocytes. Because E-cadherin in keratinocytes plays important roles in mediating cell-cell adhesion in epidermis of skin, the loss of E-cadherin and signaling components in keratinocytes may lead to the disruption of skin integrity after UVB exposure.

Apoptosis↗

Changes in elemental content during apoptotic cell death studied by electron probe X-ray microanalysis.

Recent data suggest that changes in ionic content, primarily potassium, play a pivotal role in the progression of apoptosis. However, the changes in total element content, i.e., sodium (Na), magnesium (Mg), phosphorous (P), chlorine (Cl), potassium (K), and calcium (Ca), during apoptosis have not been evaluated. Electron probe X-ray microanalysis (EPXMA) was used to measure total element content in U937 cells before and after the induction of apoptosis. As an experimental model we used U937 cells irradiated with ultraviolet (UV) light. Apoptosis was evaluated with phase-contrast microscopy, with scanning and transmission electron microscopy, and with the fluorescent dye bisbenzimide (Hoechst 33342). Plasma membrane permeability as a measure of cell death was determined by trypan blue dye exclusion. To investigate element content with EPXMA, cells were cryoprepared, i.e., cryofixed and freeze-dried, and analyzed as whole cells using a scanning electron microscope. We found that the UV irradiation induced rapid (within 2 h) morphological changes associated with apoptosis, such as plasma membrane blebbing, condensation of the chromatin, and the formation of membrane-bound apoptotic bodies. At this time, 95% of the apoptotic cells excluded trypan blue dye. EPXMA results demonstrated that UV light-irradiated apoptotic cells (cells with membrane-bound apoptotic bodies) had a lower Cl content (P < 0.001) and K content (P < 0.001) and a higher Na content (P < 0.001) in comparison with nonirradiated control cells. Also, P and Ca content was higher in apoptotic cells than in control cells, but this difference did not reach statistical significance. No differences were found in Mg. These data indicated that morphological changes characteristic of apoptotic cell death are related with significant changes in sodium, chlorine, and potassium content. In addition, we demonstrated that these changes in elemental composition were not associated with loss of cell membrane integrity.

Apoptosis↗