Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “TCP”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48Linked to original sources
PubMed2004

Calcium phosphates and glass composite coatings on zirconia for enhanced biocompatibility.

Calcium phosphates (CaP) and phosphate-based glass (P-glass, xCaO-(0.55-x) Na(2)O-0.45P(2)O(5) composition) composite coatings were obtained on a strong ZrO(2) to improve biocompatibility, the mechanical strength and biological activity. Hydroxyapatite (HA) and P-glass mixed powder slurries were coated on the ZrO(2) substrate, and subsequently heat-treated to obtain CaP- and P-glass composite coatings. The effects of glass composition (x=0.3, 0.4, 0.5 mol), mixing ratio of glass to HA (30%, 40%, 50% wt/wt), and heat treatment temperature (800 degrees C, 900 degrees C, 1000 degrees C) on the coating properties were investigated. After heat treatment, additional calcium phosphates, i.e., dicalcium phosphate (DCP) and tricalcium phosphate (TCP), were crystallized, resulting in the formation of triphasic calcium phosphates (HA-TCP-DCP) surrounded by a glass phase. The relative amounts of the crystalline phases varied with coating variables. The higher heat treatment temperature and glass amount, and the lower CaO content in the glass composition rendered the composite coatings to retain the higher amounts of TCP and DCP while the initial HA decreased. These appearance of additional crystalline phases and reduction of HA amount were attributed to the combined effects, i.e., the melting-crystallization of P-glass and the reaction between glass liquid phase and HA powder during thermal treatment. As a result of the glass phase in the composite coatings, their microstructures became much denser when compared to the pure HA coating. In particular, a completely dense structure was obtained at coating conditions with large amount of glass addition (50 wt%) at the glass composition of lower CaO content (0.3 mol CaO), and the following heat treatment above 800 degrees C for 2h. As a result, the adhesion strengths of the composite coating layers were significantly improved when compared to the pure HA coating. The highest strength of the composite coating was approximately 40 MPa, an improvement of approximately 80% with respect to the pure HA coating. The composite coatings showed much higher dissolution rates than the pure HA coating due to the newly formed crystallines (TCP and DCP) and the remaining glass phase. The osteoblast-like cells grew and spread actively on the composite coating samples. The proliferation numbers and alkaline phosphate (ALP) activities of the cells on the composite coatings were improved by approximately 30-40% when compared to Thermanox control and ZrO(2) substrate, and were comparable to the pure HA coating. These findings suggested that the CaP and P-glass composites are potentially useful for hard tissue coating system, due to their morphological and mechanical integrity, enhanced bioactivity, and favorable responses to the osteoblast-like cells.

Adhesiveness↗
PubMed2004

The effect of rhBMP-2 on canine osteoblasts seeded onto 3D bioactive polycaprolactone scaffolds.

Our strategy entails investigating the influence of varied concentrations (0, 10, 100 and 1000ng/ml) of human recombinant bone morphogenetic protein-2 (rhBMP-2) on the osteogenic expression of canine osteoblasts, seeded onto poly-caprolactone 20% tricalcium phosphate (PCL-TCP) scaffolds in vitro. Biochemical assay revealed that groups with rhBMP-2 displayed an initial burst in cell growth that was not dose-dependent. However, after 13 days, cell growth declined to a value similar to control. Significantly less cell growth was observed for construct with 1000ng/ml of rhBMP-2 from 20 days onwards. Confocal microscopy confirmed viability of osteoblasts and at day 20, groups seeded with rhBMP-2 displayed heightened cell death as compared to control. Phase contrast and scanning electron microscopy revealed that osteoblasts heavily colonized surfaces, rods and pores of the PCL-TCP scaffolds. This was consistent for all groups. Finally, Von Kossa and osteocalcin assays demonstrated that cells from all groups maintained their osteogenic phenotype throughout the experiment. Calcification was observed as early as four days after stimulation for groups seeded with rhBMP-2. In conclusion, rhBMP-2 seems to enhance the differentiated function of canine osteoblasts in a non-dose dependent manner. This resulted in accelerated mineralization, followed by death of osteoblasts as they underwent terminal differentiation. Notably, PCL-TCP scaffolds seeded only with canine osteoblasts could sustain excellent osteogenic expression in vitro. Hence, the synergy of PCL with bioactive TCP and rhBMP-2 in a novel composite scaffold, could offer an exciting approach for bone regeneration.

Animals↗
PubMed2005

A comparative study of biphasic calcium phosphate ceramics for human mesenchymal stem-cell-induced bone formation.

For the repair of bone defects, a tissue engineering approach would be to combine cells capable of osteogenic (i.e. bone-forming) activity with an appropriate scaffolding material to stimulate bone regeneration and repair. Human mesenchymal stem cells (hMSCs), when combined with hydroxyapatite/beta-tricalcium phosphate (HA/TCP) ceramic scaffolds of the composition 60% HA/40% TCP (in weight %), have been shown to induce bone formation in large, long bone defects. However, full repair or function of the long bone could be limited due to the poor remodeling of the HA/TCP material. We conducted a study designed to determine the optimum ratio of HA to TCP that promoted hMSC induced bone formation yet be fully degradable. In a mouse ectopic model, by altering the composition of HA/TCP to 20% HA/80% TCP, hMSC bone induction occurred at the fastest rate in vivo over the other formulations of the more stable 100% HA, HA/TCP (76/24, 63/37, 56/44), and the fully degradable, 100% TCP. In vitro studies also demonstrated that 20/80 HA/TCP stimulated the osteogenic differentiation of hMSCs as determined by the expression of osteocalcin.

Animals↗
PubMed2006

Ectopic bone formation in mice associated with a lactic acid/dioxanone/ethylene glycol copolymer-tricalcium phosphate composite with added recombinant human bone morphogenetic protein-2.

A new putty-like material with bone-inducing capacity was made by combining a block copolymer of poly d,l-lactic acid with randomly inserted p-dioxanone and polyethylene glycol (PLA-DX-PEG) and beta-tricalcium phosphate (beta-TCP) powder with added recombinant human bone morphogenetic protein-2 (rhBMP-2). To optimize the material's efficacy for bone formation, we formulated the optimal composition ratio of the respective constituent that gives the greatest osteoinductive efficacy in a mouse model of ectopic bone formation. In this series of studies, we investigated the size of ectopic bone mass induced 3 and 6 weeks after implantation of the materials composed of 30 mg of PLA-DX-PEG with 2 microg of rhBMP-2 and 0, 15, 30, or 60 mg of beta-TCP powder. An additional experiment was designed to investigate how content ratios of beta-TCP powder in 30 mg-putty implants (0%, 16.7%, 33.3%, 50%, 66.7%, 83.3%, or 100%) for a fixed dose (5 microg) of the rhBMP-2 altered the size of the induced ossicle. The results from the first experiment indicated that the bone yields were linearly dependent on the amount of additional beta-TCP powder. In the second experiment, the largest ossicles induced by 5 microg of rhBMP-2 were obtained when the polymer/beta-TCP ratio was 1/2 in mice. The data provide important insights into the fabrication of implants that provide efficacious delivery of rhBMP-2. The new putty-like material may be valuable for repairing or regenerating bone in a clinical setting.

Absorbable Implants↗
PubMed2006

Proliferation and osteoblastic differentiation of human bone marrow-derived stromal cells on akermanite-bioactive ceramics.

In the present study, the effects of a calcium magnesium silicate bioactive ceramic (akermanite) on proliferation and osteoblastic differentiation of human bone marrow stromal cells (hBMSC) have been investigated and compared with the classical ceramic (beta-tricalcium phosphate, beta-TCP). Akermanite and beta-TCP disks were seeded with hBMSC and kept in growth medium or osteogenic medium for 10 days. Proliferation and osteoblastic differentiation were evaluated on day 1, 4, 7 and 10. The data from the Alamar Blue assay and lactic acid production assay showed that hBMSC proliferated more significantly on akermanite than on beta-TCP. The analysis of osteoblast-related genes, including alkaline phosphatase (ALP), osteopontin (OPN), bone sialoprotein (BSP) and osteocalcin (OC), indicated that akermanite ceramics enhanced the expression of osteoblast-related genes, but type I collagen (COL I) showed no noticeable difference among akermanite and beta-TCP ceramics. Furthermore, this stimulatory effect was observed not only in osteogenic medium, but also in normal growth medium without osteogenic reagents such as l-ascorbic acid, glycerophosphate and dexamethasone. This result suggests that akermanite can promote osteoblastic differentiation of hBMSC in vitro even without osteogenic reagents, and may be used as a bioactive material for bone regeneration and tissue engineering applications.

Adult↗
PubMed2006

Repair of canine mandibular bone defects with bone marrow stromal cells and porous beta-tricalcium phosphate.

Tissue engineering has become a new approach for repairing bone defects. Previous studies have been limited to the use of slow-degradable scaffolds with bone marrow stromal cells (BMSCs) in mandibular reconstruction. In this study, a 30 mm long mandibular segmental defect was repaired by engineered bone graft using osteogenically induced autologous BMSCs seeded on porous beta-tricalcium phosphate (beta-TCP, n=5). The repair of defects was compared with those treated with beta-TCP alone (n=6) or with autologous mandibular segment (n=4). In the BMSCs/beta-TCP group, new bone formation was observed from 4 weeks post-operation, and bony-union was achieved after 32 weeks, which was detected by radiographic and histological examination. In contrast, minimal bone formation with almost fibrous connection was observed in the group treated with beta-TCP alone. More importantly, the engineered bone with BMSCs/beta-TCP achieved a satisfactory biomechanical property in terms of bending load strength, bending displacement, bending stress and Young's modulus at 32 weeks post-operation, which was very close to those of contralateral edentulous mandible and autograft bone (p>0.05). Based on these results, we conclude that engineered bone from osteogenically induced BMSCs and biodegradable beta-TCP can well repair the critical-sized segmental mandibular defects in canines.

Animals↗
PubMed2005

The protons of gluconic acid are the major factor responsible for the dissolution of tricalcium phosphate by Burkholderia cepacia CC-Al74.

Burkholderia cepacia CC-Al74 with a high ability for solubilizing tricalcium phosphate (TCP) was used to study the P-solubilization mechanism. We collected filtrates able to solubilize TCP from the cultures of strain CC-Al74 and demonstrated that the P-solubilization increased from 0 microg ml(-1) to 200 microg ml(-1) during exponential growth, when the pH decreased from 8 to 3. HPLC-analysis revealed that the solubilization of TCP was mainly caused by the release of 16.3 mM gluconic acid. At this concentration, gluconic acid was capable of solubilizing 376 microg ml(-1) of TCP whereas water at pH 3 only solubilized 35 microg ml(-1). The difference is due to the final H+ concentrations which were 13.5 mM and 1 mM in 16.3 mM gluconic acid and deionized water, respectively at pH 3.

Burkholderia cepacia↗
PubMed2004

Dechlorination and destruction of 2,4,6-trichlorophenol and pentachlorophenol using hydrogen peroxide as the oxidant catalyzed by molybdate ions under basic condition.

The dechlorination and destruction of 2,4,6-trichlorophenol (TCP) and pentachlorophenol (PCP) under basic condition using hydrogen peroxide as the oxidant catalyzed by molybdate ions have been studied. Under ambient conditions of temperature and pressure, more than 95% of millimolar solutions of TCP and PCP can be converted to CO2 and CO, chlorinated and nonchlorinated carboxylic acid in 40 min. Up to 2.4 chloride ions per TCP and 3.5 chloride ions per PCP were released. TOC measurements indicated that 18% and 11% of the carbon was mineralized for TCP and PCP respectively after an hour of reaction. The results of ESR measurements suggested that the reaction possibly proceeded via the pathway with singlet oxygen.

Catalysis↗
PubMed2006

Modified Fenton reaction for trichlorophenol dechlorination by enzymatically generated H2O2 and gluconic acid chelate.

Glucose oxidase is a well-known enzyme that catalyzes the oxidation of beta-D-glucose to produce gluconic acid and hydrogen peroxide. Fenton reaction is a powerful oxidation technology used for the oxidation of groundwater pollutants. For the application of Fenton reaction in groundwater remediation, successful operation of Fenton reaction near neutral pH, and on-site generation of both H2O2 and chelate will be beneficial. The focus of this experimental study was to couple the glucose oxidation reaction with chelate-based Fenton reaction. The idea was to use the hydrogen peroxide and chelate gluconic acid generated during glucose oxidation for the dechlorination of 2,4,6-trichlorophenol (TCP) by Fenton reaction. The oxidation of glucose was achieved using the enzyme in free and immobilized forms. The rate of production of hydrogen peroxide was determined for each system, and was used to estimate the time required for complete consumption of glucose during the process, thus avoiding any traces of glucose in the Fenton reaction. In the case of free enzyme reaction, separation of the enzyme was achieved using an ultrafiltration membrane before initiating the Fenton reaction. The oxidation of TCP by Fenton reaction was performed at varying ratios of gluconic acid/Fe, and its effect on the decomposition of TCP and H2O2 was studied. TCP degradation was studied both in terms of parent compound degradation and free chloride generation.

Chelating Agents↗
PubMed2006

Hydroxyl radical generation and oxidative stress in Carassius auratus liver as affected by 2,4,6-trichlorophenol.

With Carassius auratus, one of the main economic fish species in Eastern China as test material, this paper studied the hydroxyl radical generation and oxidative stress in its liver under the effect of 2,4,6-trichlorophenol (2,4,6-TCP). Different doses of 2,4,6-TCP were injected intraperitoneally into the fishes, and the Electron paramagnetic resonance (EPR) spectra of hepatic free radicals, activities of superoxide dismutase (SOD), catalase (CAT) and glutathione-s-transferase (GST), levels of reduced glutathione (GSH) and oxidized glutathione (GSSG), and malondialdehyde (MDA) contents were determined 24h after injection. The results showed that under the effects of 2,4,6-TCP, the generation of free radical that was considered to be hydroxyl radical increased significantly, the activities of antioxidant enzymes decreased, with CAT most strongly affected and followed by SOD and GST, the GSH level decreased significantly while GSSG level had little difference, resulting in a decreased GSH/GSSG ratio, and the MDA content increased significantly. All the test parameters showed that C. auratus was subjected to oxidative stress and damage when exposed to 2,4,6-TCP.

Animals↗
PubMed2005

Increased therapeutic ratio by 18FDG-PET CT planning in patients with clinical CT stage N2-N3M0 non-small-cell lung cancer: a modeling study.

PURPOSE: With this modeling study, we wanted to estimate the potential gain from incorporating fluorodeoxyglucose-positron emission tomography (FDG-PET) scanning in the radiotherapy treatment planning of CT Stage N2-N3M0 non-small-cell lung cancer (NSCLC) patients. METHODS AND MATERIALS: Twenty-one consecutive patients with clinical CT Stage N2-N3M0 NSCLC were studied. For each patient, two three-dimensional conformal treatment plans were made: one with a CT-based planning target volume (PTV) and one with a PET-CT-based PTV, both to deliver 60 Gy in 30 fractions. From the dose-volume histograms and dose distributions on each plan, the dosimetric factors predicting esophageal and lung toxicity were analyzed and compared. For each patient, the maximal tolerable prescribed radiation dose for the CT PTV vs. PET-CT PTV was calculated according to the constraints for the lung, esophagus, and spinal cord. From these results, the tumor control probability (TCP) was estimated, assuming a clinical dose-response curve with a median toxic dose of 84.5 Gy and a gamma(50) of 2.0. Dose-response curves were modeled, taking into account geographic misses according to the accuracy of CT and PET in our institutions. RESULTS: The gross tumor volume of the nodes decreased from 13.7 +/- 3.8 cm(3) on the CT scan to 9.9 +/- 4.0 cm(3) on the PET-CT scan (p = 0.011). All dose-volume characteristics for the esophagus and lungs decreased in favor of PET-CT. The esophageal V(45) (the volume of the esophagus receiving 45 Gy) decreased from 45.2% +/- 4.9% to 34.0% +/- 5.8% (p = 0.003), esophageal V(55) (the volume of the esophagus receiving 55 Gy) from 30.6% +/- 3.2% to 21.9% +/- 3.8% (p = 0.004), mean esophageal dose from 29.8 +/- 2.5 Gy to 23.7 +/- 3.1 Gy (p = 0.004), lung V(20) (the volume of the lungs minus the PTV receiving 20 Gy) from 24.9% +/- 2.3% to 22.3% +/- 2.2% (p = 0.012), and mean lung dose from 14.7 +/- 1.3 Gy to 13.6 +/- 1.3 Gy (p = 0.004). For the same toxicity levels of the lung, esophagus, and spinal cord, the dose could be increased from 56.0 +/- 5.4 Gy with CT planning to 71.0 +/- 13.7 Gy with PET planning (p = 0.038). The TCP corresponding to these doses was estimated to be 14.2% +/- 5.6% for CT and 22.8% +/- 7.1% for PET-CT planning (p = 0.026). Adjusting for geographic misses by PET-CT vs. CT planning yielded TCP estimates of 12.5% and 18.3% (p = 0.009) for CT and PET-CT planning, respectively. CONCLUSION: In this group of clinical CT Stage N2-N3 NSCLC patients, use of FDG-PET scanning information in radiotherapy planning reduced the radiation exposure of the esophagus and lung, and thus allowed significant radiation dose escalation while respecting all relevant normal tissue constraints. This, together with a reduced risk of geographic misses using PET-CT, led to an estimated increase in TCP from 13% to 18%. The results of this modeling study support clinical trials investigating incorporation of FDG-PET information in CT-based radiotherapy planning.

Carcinoma, Non-Small-Cell Lung↗
PubMed2006

Evaluation of image-guided radiation therapy (IGRT) technologies and their impact on the outcomes of hypofractionated prostate cancer treatments: a radiobiologic analysis.

PURPOSE: To quantify the mitigation of geometric uncertainties achieved with the application of various patient setup techniques during the delivery of hypofractionated prostate cancer treatments, using tumor control probability (TCP) and normal tissue complication probability. METHODS AND MATERIALS: Five prostate cancer patients with approximately 16 treatment CT studies, taken during the course of their radiation therapy (77 total), were analyzed. All patients were planned twice with an 18 MV six-field conformal technique, with 10- and 5-mm margin sizes, with various hypofractionation schedules (5 to 35 fractions). Subsequently, four clinically relevant patient setup techniques (laser guided and image guided) were simulated to deliver such schedules. RESULTS: As hypothesized, the impact of geometric uncertainties on clinical outcomes increased with more hypofractionated schedules. However, the absolute gain in TCP due to hypofractionation (up to 21.8% increase) was significantly higher compared with the losses due to geometric uncertainties (up to 8.6% decrease). CONCLUSIONS: The results of this study suggest that, although the impact of geometric uncertainties on the treatment outcomes increases as the number of fractions decrease, the reduction in TCP due to the uncertainties does not significantly offset the expected theoretical gain in TCP by hypofractionation.

Dose Fractionation, Radiation↗
PubMed2006

Examination of GyE system for HIMAC carbon therapy.

PURPOSE: A retrospective analysis was made to examine appropriateness in the estimation of the biologic effectiveness of carbon-ion radiotherapy using resultant data from clinical trials at the heavy-ion medical accelerator complex (HIMAC) at the National Institute of Radiological Sciences in Chiba, Japan. METHODS AND MATERIALS: At HIMAC, relative biologic effectiveness (RBE) values of therapeutic carbon beams were determined based on experimental results of cell responses, on values expected with the linear-quadratic model, and based on experiences with neutron therapy. We use fixed RBE values independent of dose levels, although this apparently contradicts radiobiologic observations. Our RBE system depends only on LET of the heavy-ion radiation fields. With this RBE system, over 2,000 patients have been treated by carbon beams. With data from these patients, the local control rate of non-small-cell lung cancer was analyzed to verify the clinical RBE of the carbon beam. The local control rate was compared with rates published by groups from Gunma University and Massachusetts General Hospital. Using a simplified tumor control probability (TCP) model, clinical RBE values were obtained for different levels of TCP. RESULTS: For the 50% level of the clinical TCP, the RBE values nearly coincide with those for in vitro human salivary gland cell survival at 10%. For the higher levels of clinical TCP, the RBE values approach closer to those adapted in clinical trials at HIMAC.

Algorithms↗
PubMed2006

Using the dual-mode model to describe adsorption of organic pollutants onto an organoclay.

Adsorption of 2,4,5-trichlorophenol (TCP) and picric acid (PA) by montmorillonite preloaded with crystal violet (CV) up to 80, 100, and 125% of the cation exchange capacity was studied. The adsorption isotherms indicated a strong interaction of TCP and PA with the organoclay. While the adsorption isotherms of both pollutants can be described by the Langmuir model with relatively good fit, the adsorption of TCP is more adequately described by the dual-mode model (DMM), which combines the Langmuir equation with a partition mechanism. Competitive adsorption experiments and adsorption experiments in water:ethanol mixed medium as a solvent confirmed the assumption that the removal of TCP from water by the organoclay follows two different mechanisms: site-specific adsorption occurs in the low concentration range, whereas a partition mechanism dominates the high concentration range. This double mechanism in organoclays exhibits both complete removal at low pollutant concentrations and high sorption capacity in the high concentration range, and therefore may be effective in water treatment for a wide range of pollution levels.

Adsorption↗
PubMed2004

Potential outcomes of modalities and techniques in radiotherapy for patients with hypopharyngeal carcinoma.

BACKGROUND AND PURPOSE: To determine potential improvements in treatment outcome for patients with hypopharyngeal carcinoma, T4N0M0, using proton and intensity modulated photon radiotherapy (IMRT) compared to a standard 3D conformal radiotherapy treatment (3D-CRT) in terms of local tumour control probability, TCP, and normal tissue complication probability (NTCP) for the spinal cord and the parotid glands using. PATIENTS AND METHODS: Using the three-dimensional treatment-planning system, Helax-TMS, 5 patients were planned with protons, IMRT, and 3D-CRT plans. The prescribed dose used was 30 fractions x 2.39 Gy for the protons and IMRT and 35 fractions x 2.00 Gy for 3D-CRT. The treatment plans were evaluated using dose volume data and dose response models were used to calculate TCP and NTCP. The target volumes were delineated to spare the parotid glands. A dose escalation was made for protons and IMRT using NTCP constraints to the spinal cord. RESULTS: On average, protons and IMRT increase TCP by 17% compared to 3D-CRT. For the spinal cord NTCP values are zero for all methods and patients. Average NTCP values for the parotid glands were >90% for 3D-CRT and significantly lower for protons and IMRT varying from 43-65%. The average parotid gland dose was 33 Gy for the protons, 38 Gy for IMRT and 48 Gy for 3D-CRT. CONCLUSIONS: Protons and IMRT gave a significant TCP increase compared to 3D-CRT while no significant difference between protons and IMRT was found. Protons generally show lower non-target tissue doses, which indicates a possibility for further dose escalation. Large individual dose differences between protons and IMRT for parotid glands indicate that some patients may benefit more from protons and others from IMRT.

Carcinoma↗
PubMed2003

Treatment of trichlorophenol by catalytic oxidation process.

The oxidation of 2,4,6-trichlorophenol (TCP) by ferrous-catalyzed hydrogen peroxide was quantified and modeled in the study. TCP was effectively degraded by hydroxyl radicals that were generated by Fe(II)/H(2)O(2) in the oxidation process. The oxidation capacity (OC) of the process depends on the concentrations of oxidant (hydrogen peroxide) and oxidative catalyst (ferrous ion). Up to 99.6% of TCP removal can be achieved in the process, provided the doses of Fe(II) and H(2)O(2) are selected correctly. The OC of the process was successfully predicted through a kinetic approach in a two-stage model with some simple and measurable parameters, which makes the model useful for predicting, controlling and optimizing the catalyzed oxidation process in the degradation of TCP.

Catalysis↗
PubMed2001

Transforming growth factor-beta1 adsorbed to tricalciumphosphate coated implants increases peri-implant bone remodeling.

Increasing experimental interest has emerged for the use of growth factors to stimulate bone healing and bone formation in various clinical situations. We and others have demonstrated that recombinant human transforming growth factor-beta1 (rhTGF-beta1) adsorbed onto tricalcium phosphate (TCP)-coated implants can improve mechanical fixation and bone ongrowth. The present study evaluated bone remodeling in newly formed bone and adjacent trabecular bone around TCP-coated implants with and without rhTGF-beta1 adsorption. Unloaded cylindrical grit-blasted titanium alloy implants coated with TCP were inserted bilaterally into the femoral condyles of 10 skeletally mature mongrel dogs. The implants were initially surrounded by a 2 mm gap. Implants with 0.3 microg rhTGF-beta1 were compared with implants without growth factor. The dogs were sacrificed after six weeks. Bone remodeling was evaluated by histomorphometry on Goldner-stained undecalcified sections. The bone volume in the gap was increased significantly from 17.6% in the control group to 25.6% in the rhTGF-beta1 group (p = 0.03). Also bone surface was increased in the rhTGF-beta1 group. The osteoclast covered surfaces were increased from 3.6% in the control group to 5.9% in the rhTGF-beta1 group (p = 0.02). In the surrounding trabecular bone no significant changes in bone remodeling parameters was demonstrated. This study suggests that rhTGF-beta1 adsorbed onto TCP-ceramic coated implants accelerates repair activity in the newly formed bone close to the implant, but it does not seem to influence bone remodeling in preexisting bone at a greater distance from the implant.

Adsorption↗
PubMed2001

Material-dependent bone induction by calcium phosphate ceramics: a 2.5-year study in dog.

Bone induction by different calcium phosphate biomaterials has been reported previously. With regard to (1) whether the induced bone would disappear with time due to the absence of mechanical stresses and (2) whether this heterotopically formed bone would give rise to uncontrolled growth, a long-time investigation of porous hydroxyapatite ceramic (HA), porous biphasic calcium phosphate ceramic (TCP/HA, BCP), porous alpha-tricalcium phosphate ceramic (alpha-TCP) and porous beta-tricalcium phosphate ceramic (beta-TCP) was performed in dorsal muscles of dog, for 2.5 years. Histological observation, backscattered scanning electron microscopy observation and histomorphometric analysis were made on thin un-decalcified sections of retrieved samples. Normal compact bone with bone marrow was found in all HA implants (n = 4) and in all BCP implants (n = 4), 48 +/- 4% pore area was filled with bone in HA implants and 41 +/- 2% in BCP implants. Bone-like tissue, which was a mineralised bone matrix with osteocytes but lacked osteoblasts and bone marrow, was found in all beta-TCP implants (n = 4) and in one of the four alpha-TCP implants. Both normal bone and bone-like tissues were confined inside the pores of the implants. The results show that calcium phosphate ceramics are osteoinductive in muscles of dogs. Although the quality and quantity varied among different ceramics, the induced bone in both HA and BCP ceramics did neither disappear nor grow uncontrollably during the period as long as 2.5 years.

Animals↗