Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Spray drying”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48Linked to original sources
PubMed2006

Evaluation of Inutec SP1 as a new carrier in the formulation of solid dispersions for poorly soluble drugs.

Solid dispersions made up of itraconazole and Inutec SP1, a new polymeric surfactant, were prepared by spray drying and hot-stage extrusion. Differential scanning calorimetry (DSC) and X-ray powder diffraction (XRD) were used to evaluate the miscibility of the components of the dispersions, and dissolution experiments were performed in simulated gastric fluid without pepsin (SGFsp) to evaluate the pharmaceutical performance of itraconazole from the solid dispersions. DSC analysis showed that the solid dispersions are phase separated systems made up of glassy and crystalline itraconazole and amorphous Inutec SP1. The amount of crystalline drug substance was higher in the dispersions prepared by hot-stage extrusion and was clearly a function of the drug concentration. Since no crystallinity could be detected by XRD points to the fact that the crystallites formed are very small in size. Despite the presence of glassy and crystalline clusters, the dissolution properties of the solid dispersions were significantly improved in comparison to pure itraconazole (glassy or crystalline) or physical mixtures with Inutec SP1. This study proves the potential of the new polymeric surfactant as a carrier in the formulation of solid dispersions for poorly soluble drugs.

Calorimetry, Differential Scanning↗
PubMed2006

Characterization of biodegradable chitosan microspheres containing vancomycin and treatment of experimental osteomyelitis caused by methicillin-resistant Staphylococcus aureus with prepared microspheres.

The biodegradable chitosan microspheres containing vancomycin hydrochloride (VANCO) were prepared by spray drying method with different polymer:drug ratios (1:1, 2:1, 3:1 and 4:1). Thermal behaviour, particle size and distribution, morphological characteristics, drug content, encapsulation efficiency, in vitro release assessments of formulations have been carried out to obtain suitable formulation which shows sustained-release effect when implanted. Sterilized VANCO loaded microspheres were implanted to proximal tibia of rats with methicillin-resistant Staphylococcus aureus (MRSA) osteomyelitis. Intramuscular (IM) injection of VANCO for 21 days was applied to another group for comparison. After 3 weeks of treatment, bone samples were analysed with a microbiological assay. According to the results, encapsulation efficiency and yield of microspheres in all formulations were higher than 98% and 47%, respectively. Particle sizes of microspheres were smaller than 6 microm. All microsphere formulations have shown sustained-release effect. In vitro drug release rate decreased due to the increase in polymer:drug ratio but no significant difference was seen between these results (p>0.05). Based on our in vivo data, rats implanted VANCO-loaded chitosan microspheres and administered IM injection showed 3354+/-3366 and 52500+/-25635 colony forming unit of MRSA in 1g bone samples (CFU/g), respectively. As a result, implanted VANCO-loaded microspheres were found to be more effective than IM route for the treatment of experimental osteomyelitis.

Animals↗
PubMed2006

Preparation of amorphous cefuroxime axetil nanoparticles by controlled nanoprecipitation method without surfactants.

Amorphous nanoparticles of cefuroxime axetil (CFA), a poorly water-soluble drug, were produced by the controlled nanoprecipitation method without any surfactants at room temperature. The influence of the operation parameters, such as the types of solvent and anti-solvent, the stirring speed, the solvent/anti-solvent (S/AS) volume ratio, the drug concentration and the precipitation temperature, were experimentally investigated. The results indicated that increasing the stirring speed and the S/AS volume, decreasing the drug concentration and the temperature favored to decrease the particle size from 700 to 900 nm to approximately 300 nm. The XRD analyses confirmed that the as-prepared CFA was amorphous nanoparticles. Furthermore, the amorphous CFA nanoparticles exhibited significantly enhanced dissolution property when compared to the commercial spray-dried product. The results demonstrated that the controlled nanoprecipitation method is a direct and feasible technology which could be utilized for preparation of the poorly water-soluble pharmaceutical nanoparticles.

Calorimetry, Differential Scanning↗
PubMed2005

Light extinction at agglomerates of spheres--a practical test on the submicroscale.

Today's theories applied to the inversion of measurement data from optical measurement devices are restricted to single spherical particles. However, particles formed in industrial processes such as precipitation and crystallization are often nonspherical or agglomerates. Theoretical approaches to describe the optical behavior of such particle systems have already been proposed. The verification of these theories has mostly been done using microwave scattering experiments with agglomerates in the millimeter range. This paper provides a first but surely not all-embracing practical test for a general extension of the Mie theory to agglomerates of submicroscale spheres. For the sake of simplicity and from practical viewpoints of online-sensor development only light extinction of an agglomerated suspension has been examined. The required rigid agglomerates have been produced using a spray-drying method that generates particles with a much higher mechanical stability than can be obtained by the usual procedures. Subsequent fractionation of the suspension delivers systems with only a limited number of agglomerate configurations. Extinction measurements at multiple wavelengths using dynamic extinction spectroscopy have been conducted to determine the extinction cross section of the agglomerated dispersions. These data are compared with computations of agglomerates scattering.

Journal Article↗
PubMed2004

Development of pulsatile release tablets with swelling and rupturable layers.

A tablet system consisting of cores coated with two layers of swelling and rupturable coatings was prepared and evaluated as pulsatile drug delivery system. Cores containing buflomedil HCl as model drug were prepared by direct compression of different ratios of spray-dried lactose and microcrystalline cellulose and were then coated sequentially with an inner swelling layer containing a superdisintegrant (croscarmellose sodium) and an outer rupturable layer of ethylcellulose. The effect of core composition, level of swelling layer and rupturable coating, and magnesium stearate in rupturable layer was investigated. Mechanical properties of ethylcellulose films in the dry and wet state were characterized with a puncture test. Rupture and dissolution tests were performed using the USP XXIV paddle method at 50 rpm in 0.1 N HCl. The lag time of the pulsatile release tablets decreased with increasing amount of microcrystalline cellulose in the cores and increased with increasing levels of both swelling layer and rupturable ethylcellulose coating. Increasing levels of the ethylcellulose coating retarded the water uptake and thus prolonged the lag time. Addition of magnesium stearate to the ethylcellulose coating lowered the mechanical strength of the film and improved the robustness of the system.

Cellulose↗
PubMed2004

Controlled release of clozapine through chitosan microparticles prepared by a novel method.

A simple and commercially viable method of preparation of chitosan microparticles (MPs) was adopted for the entrapment of clozapine, which can be easily scaled-up to controlled drug delivery dosage form. This method is devoid of tedious processes like emulsification in oil phase, spray-drying, etc. MPs have been prepared by changing the experimental variables such as extent of crosslinking and amount of clozapine loading in order to optimize the process variables on the final percent drug entrapment efficiency, size of MPs and release rates. Absence of chemical interactions between drug, polymer and crosslinking agent after the production of MPs was confirmed by Fourier transform infrared spectroscopy (FTIR). Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) spectra were obtained for clozapine-loaded chitosan MPs to understand the crystalline nature of the drug after entrapment. The results indicated a molecular level dispersion of clozapine in the polymer matrix. Effect of crosslinking and drug loading on thermal decomposition of chitosan was studied by thermogravimetry (TGA) and these data indicated that pure chitosan is stable when compared to clozapine-loaded chitosan. MPs produced were irregular in shape, with average particle sizes in the range of 543-698 microm as measured by the laser light scattering technique. Clozapine entrapment up to 98.97% was obtained as determined by high performance liquid chromatography. In vitro release studies were performed in phosphate buffer pH 7.4 solution and the release of clozapine was achieved up to 12 h. Swelling studies were conducted in water and diffusion coefficients (D) and diffusional exponents (n) for water transport were determined using the empirical equation. In vivo absorption kinetics of clozapine and clozapine-loaded MPs were investigated in albino rats. These results indicated that absorption of clozapine from MPs was delayed since the area under the curve was higher when compared to neat clozapine.

Animals↗
PubMed2005

How cyclodextrin incorporation affects the properties of protein-loaded PLGA-based microspheres: the case of insulin/hydroxypropyl-beta-cyclodextrin system.

The aim of this work was to study the influence of cyclodextrin (CD) incorporation on the properties of protein-loaded poly(lactide-co-glycolide) (PLGA) microspheres, with particular regards to protein release kinetics. To this purpose, insulin-loaded microspheres were prepared by spray-drying emulsion or solution formulations, with or without hydroxypropyl-beta-cyclodextrin (HPbetaCD), and fully characterized for encapsulation efficiency and release kinetics of both insulin and cyclodextrin. Homogeneous populations of spherical microparticles entrapping both insulin and HPbetaCD were obtained. In order to get an insight into insulin/HPbetaCD interactions occurring inside microspheres, Fourier transform infrared (FTIR) analysis in the Amide I region was performed. FTIR spectra of dried microspheres containing HPbetaCD showed a change in insulin secondary structure, attributed to the presence of insulin/HPbetaCD complexes within microspheres. Insulin release was affected by the presence of HPbetaCD depending on the initial formulation conditions. In the case of microspheres prepared from emulsion, cyclodextrin reduced only insulin burst, whereas in the case of microspheres obtained from solution, the overall insulin release rate was slowed down. Combining the release kinetics of HPbetaCD with the FTIR results on hydrated microspheres, it was concluded that the formation of insulin/HPbetaCD complexes inside microspheres is critical to decrease protein diffusivity in the polymer matrix and achieve an effective modulation of protein release rate.

2-Hydroxypropyl-beta-cyclodextrin↗
PubMed2005

Development of a novel sustained release formulation of recombinant human growth hormone using sodium hyaluronate microparticles.

A novel sustained release formulation of recombinant human growth hormone (SR-rhGH) was developed as a once-a-week injection formulation using sodium hyaluronate. SR-rhGH was produced in the form of solid microparticles by spray drying technology. A single administration of a prototype formulation of SR-rhGH with a ratio of hGH:HA=1:1 to cynomolgus monkeys through a fine 26-gauge needle induced continuous elevation of serum IGF-I level for 6 days demonstrating the bioactivity of hGH released from the prototype formulation. For expanded pre-clinical and clinical developments, a pilot-scale process under aseptic condition was established and used for the preparation of the optimized formulation of SR-rhGH with a ratio of hGH:HA=1:3. When the ratio of hGH to HA changed from 1:1 to 1:3, hGH released more slowly in vitro from SR-rhGH with almost complete release of hGH loaded. According to pharmacokinetic and pharmacodynamic studies in beagle dogs, sustained release of hGH from the optimized formulation of SR-rhGH continued for a more extended period longer than 72 h with a lower C(max) than those of prototype formulations. The single administration resulted in an elevation of serum insulin-like growth factor-I (IGF-I) level for 6 days with a maximum value higher than the baseline level by ca. 350 ng/mL, which supported the possibility of SR-rhGH as a once-a-week injection formulation of hGH. The bioavailability of both formulations was comparable to that of hGH daily injection formulation. Finally, toxicity studies revealed no evidence of adverse effect in both cynomolgus monkeys and beagle dogs.

Animals↗
PubMed2005

Influence of administration route on tumor uptake and biodistribution of etoposide loaded solid lipid nanoparticles in Dalton's lymphoma tumor bearing mice.

The study evaluates the capability of tripalmitin nanoparticles in enhancing the tumor uptake of etoposide, and the influence of administration route on the biodistribution and tumor uptake of etoposide loaded tripalmitin (ETPL) nanoparticles in Dalton's lymphoma tumor bearing mice. ETPL nanoparticles were prepared by melt-emulsification and high pressure homogenization followed by the spray drying of nanodispersion. Characterization of the nanoparticles was done by particle size analysis, zeta potential measurement and scanning electron microscopy. The size of ETPL nanoparticles was 387 nm and possessed negative charge. Etoposide and ETPL nanoparticles were radiolabeled with 99mTc with high labeling efficiency. The labeled complexes showed good in vitro stability in the presence of DTPA/cysteine and serum stability. Etoposide and ETPL nanoparticles were injected by subcutaneous, intravenous or intraperitoneal routes and their biodistribution and tumor uptake were determined. Subcutaneous injection reduced the distribution of ETPL nanoparticles to all the tissues studied whereas after intraperitoneal injection, the distribution of ETPL nanoparticles to tissues was higher than free etoposide. The intravenous injection resulted in lower concentrations of ETPL nanoparticles in the organs of RES compared to free etoposide. ETPL nanoparticles experienced significantly high brain distribution after intraperitoneal injection indicating its potential use in targeting etoposide to brain tumors. After subcutaneous injection, the tissue distribution of ETPL nanoparticles increased with time indicating their accumulation at the injection site for a longer time. The tumor uptake of both etoposide and ETPL nanoparticles was significantly high after subcutaneous injection (P<0.001) compared to the other routes of administration. The tumor concentration of ETPL nanoparticles after subcutaneous injection was 59 folds higher than that obtained after intravenous and 8 folds higher than after intraperitoneal route at 24 h post-injection. The tumor concentration of ETPL nanoparticles increased with time after subcutaneous injection indicating the slower and progressive penetration from the injection site into the tumor. The study signifies the advantage of incorporating etoposide into tripalmitin nanoparticles in controlling its biodistribution and enhancing the tumor uptake by several folds. The study also reveals that, of the three routes investigated, subcutaneous injection is the route of preference for facilitating high tumor uptake and retention and is likely to have greater antitumor effect resulting in tumor regression.

Animals↗
PubMed2005

Preparation and in vitro and in vivo release studies of Huperzine A loaded microspheres for the treatment of Alzheimer's disease.

The purpose of this study was to prepare microspheres containing Huperzine A, which is used for patients suffering from Alzheimer's disease because of its potent anticholineestase activity, and to clarify in vitro and in vivo release characteristics of them. The preparation and in vitro and in vivo release studies of Huperzine A loaded microspheres were described. By spray drying method, Huperzine A was encapsulated successfully in the microspheres which were spherical with a non-porous and smooth surface. In vitro studies showed that the release of Huperzine A from microspheres was depended on the properties of polymers and the release medium. Counter-ionic interaction between the primary amine group of Huperzine A and the carboxylic terminal group of PLG polymers improves the encapsulation of Huperzine A, reducing the initial burst and extending the sustained release. High molecular weight of PLG polymer leads to a negative influence on sustained release of Huperzine A due to less carboxylic terminal groups. Acidic medium also reduces the initial burst and sustained the release due to decreased swelling of the polymeric matrix. In vivo experiment showed, after intramuscular injection, that the plasma concentration of Huperzine A reached the max. at 2 h, then fell rapidly to a stable and near constant level of 0.5 to 2.5 ng/ml within 2 weeks, until the drug was exhausted from the microspheres. It indicates the potential of a 2-week sustained release system of Huperzine A.

Alkaloids↗
PubMed2005

Injectable porous hydroxyapatite microparticles as a new carrier for protein and lipophilic drugs.

Hydroxyapatite (Ca10 (PO4)6(OH)2) is a biodegradable material that forms a major component of bones and teeth. We prepared injectable spherical porous hydroxyapatite microparticles (SP-HAp) as a drug carrier by the spray-drying method. We then examined the usefulness of SP-HAp as a carrier for drugs such as interferon alpha (IFNalpha), testosterone enanthate (TE), and cyclosporin A (CyA). SP-HAp had an average diameter of 5 mum and a porosity of approximately 58%. It could be injected subcutaneously through a 27-gauge needle. SP-HAp was observed to be biodegradable. The speed of degradation of SP-HAp could be regulated by altering the calcination temperature. IFNalpha was adsorbed well to SP-HAp particles, but INFalpha was released faster from the particles, than the particles could degrade in both in vitro and in vivo experiments. Addition of human serum albumin and zinc (reinforcement) to IFNalpha-adsorbed SP-HAp caused marked prolongation of release in vivo. The in vivo release of testosterone enanthate and CyA from SP-HAp preparation, which was easily injectable, was similarly prolonged to that from the oil preparation. In conclusion, the SP-HAp seems to be useful as a biodegradable and subcutaneously injectable drug carrier. It is suggested that the reinforcement of the SP-HAp is very effective on the sustained release of drugs.

Animals↗
PubMed2006

Chemical analysis of silica doped hydroxyapatite biomaterials consolidated by a spark plasma sintering method.

Silica (SiO(2)) and the silicate-based biomaterials play an important role due to their in vitro and in vivo biological response. The present study synthesized a novel nano-structured amorphous silica doped hydroxyapatite (HA) via an aqueous precipitation route. HA was prepared with 0, 1, 3 and 5 wt% silica, which are comparable to the measured silicon content of natural bone. After spray drying into micron sized powders, the silica doped HA (SiHA) powders were consolidated at 1000 degrees C with a dwell time of 3 min using a spark plasma sintering (SPS) technique. X-ray diffraction analysis showed a main apatite phase with minor secondary beta-tricalcium phosphate (beta-TCP) was observed in the as-consolidated SiHA compacts. Substitution of PO(4)(3-) by SiO(4)(4-) in the apatite structure resulting in a small increase in the lattice parameters in both a-axis and c-axis of the unit cell were identified by X-ray photoelectron spectrometer (XPS) analysis and Raman spectrometer investigation. The cell culture in vitro investigation demonstrated that the presence of silicon in the SPS consolidated compacts contributed to the relatively high cell proliferation ability when compared with phase pure HA.

Biocompatible Materials↗
PubMed2006

Stability of thermostable alkaline protease from Bacillus licheniformis RP1 in commercial solid laundry detergent formulations.

The stability of crude extracellular protease produced by Bacillus licheniformis RP1, isolated from polluted water, in various solid laundry detergents was investigated. The enzyme had an optimum pH and temperature at pH 10.0-11.0 and 65-70 degrees C. Enzyme activity was inhibited by PMSF, suggesting that the preparation contains a serine-protease. The alkaline protease showed extreme stability towards non-ionic (5% Tween 20% and 5% Triton X-100) and anionic (0.5% SDS) surfactants, which retained 100% and above 73%, respectively, of its initial activity after preincubation 60 min at 40 degrees C. The RP1 protease showed excellent stability and compatibility with a wide range of commercial solid detergents at temperatures from 40 to 50 degrees C, suggesting its further application in detergent industry. The enzyme retained 95% of its initial activity with Ariel followed by Axion (94%) then Dixan (93.5%) after preincubation 60 min at 40 degrees C in the presence of 7 mg/ml of detergents. In the presence of Nadhif and New Det, the enzyme retained about 83.5% of the original activity. The effects of additives such as maltodextrin, sucrose and PEG 4000 on the stability of the enzyme during spray-drying and during subsequent storage in New Det detergent were also examined. All additives tested enhanced stability of the enzyme.

Bacillus↗
PubMed2004

Detection of three wound-induced proteins in papaya latex.

The effects of routine mechanical wounding for latex collection from unripe fruits of the tropical Carica papaya tree were investigated. For that purpose, the protein composition of three different latexes was analyzed. The first one, commercially available, was provided in the form of a spray-dried powder, the second one was harvested from fully grown but unripe papaya fruits that are regularly tapped for latex production and the last one, was obtained from similar fruits wounded for the first time. Repeated mechanical wounding was found to profoundly affect the protein content of the latex inducing, among others, activation of papain. Regularly tapped latexes also accumulated several low molecular weight proteins not yet identified, as well as three proteins identified as a trypsin inhibitor, a class-II chitinase and a glutaminyl cyclase on the basis of their enzymatic or inhibitory activities and chromatographic elution profiles. This latter was found here, for the first time, to be a wound-induced protein. The roles of these proteins in the plant defense mechanism are discussed.

Amidohydrolases↗
PubMed2005

Immune responses after local administration of IgY loaded-PLGA microspheres in gut-associated lymphoid tissue in pigs.

Oral vaccination of large animals using PLGA MS (poly(D,L-lactide-co-glycolide)microspheres) appeared to be more challenging than immunization of mice. The purpose of this study was to deliver to GALT an immunogenic model protein (IgY), free or encapsulated by spray-drying in PLGA MS, and to evaluate systemic immune response in SPF Large White pigs. Pigs were surgically processed for local administration of IgY in three sets of experiments. In two sets of experiments, administration was locally performed in temporary ligatured intestinal segments, in jejunal Peyer's patches and in mesenteric lymph nodes. In the third experiment, pigs received IgY via an intestinal cannula. Total IgY-specific antibodies were detected in the sera of pigs after a single local immunization, but not in the sera of cannulated pigs. The study of IgG1 and IgG2 isotypes indicated that PLGA MS are able to elicit a combined serum IgG2/G1 response with a predominance of IgG1 response when locally administered. PLGA MS can be a potential oral delivery system for antigen but our results underlined the difficulty to immunize large animals like pigs. Transposition of data between small and large animals appears to be complex and suggests that physiological features need to be considered to increase intestinal availability of oral encapsulated vaccines.

Animals↗
PubMed2001

A high performance liquid chromatographic method for the estimation of diethylcarbamazine content in medicated salt samples.

A simple and reproducible method for the estimation of diethylcarbamazine citrate (DEC) by high performance liquid chromatography (HPLC) in DEC-medicated salt was developed. HPLC analysis was conducted with a mobile phase containing acetonitrile/phosphate buffer (20 mM KH(2)PO(4,) adjusted to pH 3.2 with 10% ortho-phosphoric acid) in the ratio of 1:9 and at a flow rate of 1.5 ml/min. A Phenomenex C8 column (15 cmx4.6 mm) of 5 microm particle size was used for the analysis. Analysis was done at UV 210 nm, 0.02 a.u.f. and 40 degrees C. The coefficient of variation was <10% in the range of 1-25 microg/ml and the minimum detectable level was 0.5 microg/ml. The quality of DEC-medicated salt prepared by two methods was analyzed by using the HPLC method. In spray drying method, 29 and 71% of the samples and in rotating drum method, 9 and 12% of samples were found to contain DEC at 0.15-0.25% and >0.25%, respectively. Thus, this quick and simple HPLC method for the estimation of DEC could play a vital role in checking the quality of the DEC medicated salt used for the control of filariasis.

Animals↗
PubMed2003

Mucoadhesive microspheres containing gentamicin sulfate for nasal administration: preparation and in vitro characterization.

In this study, suitable microsphere formulations were designed in order to provide the absorption of a high polar drug through nasal mucosa. For this purpose, gentamicin sulfate (GS) was chosen as a model drug and used at different drug/polymer ratios in the microsphere formulations. The microspheres were prepared by spray drying technique. Hydroxypropyl methylcellulose was used as a mucoadhesive polymer in the formulations to increase the residence time of the microspheres on the mucosa. Sodium cholate was added into the formulations for increasing the absorption of GS through nasal mucosa. The in vitro characteristics of the microspheres were determined. The microspheres were evaluated with respect to the particle size, production yield, encapsulation efficiency, shape and surface properties, drug-polymer interaction, mucoadhesive property, in vitro drug release and suitability for nasal drug delivery.

Adhesives↗
PubMed2002

Gamma irradiation effects and EPR investigation on poly(lactide-co-glycolide) microspheres containing bupivacaine.

The effects of gamma radiation on the stability of microspheres made of a polylactide-co-glycolide 50:50 copolymer (PLGA) and loaded with 40% bupivacaine (BU) were studied. The radiolysis mechanisms of BU and BU-loaded microspheres were investigated by using electronic paramagnetic resonance (EPR) analysis. Microspheres were prepared by means of a spray drying method. Gamma Irradiation was carried out in the open, at the dose of 25 kGy, by using a 60Co source. The stability of BU-loaded microspheres was evaluated over a 1-year period on the basis of drug content and dissolution profile. Non-irradiated microspheres were stable over the whole period under consideration. Immediately after irradiation the amount of BU released after 24 h from irradiated microspheres increased from 17 to 25%; in the following 3 months of storage it increased to about 35%, and then it kept constant for 1 year. Radicals generated by BU irradiation were identified by EPR analysis; the sensitivity to gamma radiation of BU was about four times lower than that of PLGA. Furthermore, the EPR spectra of loaded microspheres showed that the relative abundance of BU radicals plus PLGA radicals was proportionate to the electronic fractions of the components; this implies that no spin transfer BU/PLGA had occurred during gamma irradiation.

Alanine↗