Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “REINFORCEMENT”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48Linked to original sources
PubMed2005

Intracerebroventricular administration of galanin decreases free water intake and operant water reinforcer efficacy in water-restricted rats.

The 29/30 amino acid neuropeptide galanin coexists with vasopressin in the hypothalamus and has been shown to inhibit the actions of vasopressin and aldosterone, suggesting an inhibitory role for galanin in physiological water retention mechanisms and water seeking and water consumption behavior. Little work, however, has examined a role for galanin in water intake regulation. Furthermore, many experiments that have reported galanin-induced impairments in the performance of tasks thought to measure learning and memory have used water restriction routines and water reinforcers to maintain responding. Therefore, the present study examined the effects of intracerebroventricularly administered galanin (5.0-20.0 microg/5 microl) on free water consumption during a 10 min test session and a follow up open field exploration, an operant progressive ratio (PR) schedule, a test used to assess reinforcer strength, and an operant fixed time schedule (FT 20) in 23.5h water restricted rats. Finally, in an additional experiment that was designed to simulate the effects of a galanin-induced decrease in water reinforcer efficacy, the rats were allowed access to water prior to testing in an operant delayed non-matching to position (DNMTP) task. A galanin-induced decrease in water consumption was observed in both the free access test and the FT 20 at the 20 microg dose, but no significant galanin-induced alterations in open field behavior. A decrease in responses emitted and rewards received was observed on the PR schedule at the 5, 10, and 20 microg doses. Pre-session access to water significantly reduced the number of trials per session in the DNMTP but did not reduce accuracy. This study is the first to observe a galanin-induced reduction in water intake and reinforced operant behavior, and suggests that galanin may play a role in regulating water intake and reinforcement. However, the present data also suggest that DNMTP choice accuracy deficits observed previously cannot be attributed to a galanin-induced change in reinforcer efficacy.

Animals↗
PubMed2004

Fatigue resistance and stiffness of glass fiber-reinforced urethane dimethacrylate composite.

STATEMENT OF PROBLEM: Retentive properties of cast metal clasps decrease over time because of metal fatigue. Novel fiber-reinforced composite materials are purported to have increased fatigue resistance compared with metals and may offer a solution to the problem of metal fatigue. PURPOSE: The aim of this study was to investigate the fatigue resistance and stiffness of E-glass fiber-reinforced composite. MATERIAL AND METHODS: Twelve cylindrical fiber-reinforced composite test cylinders (2 mm in diameter and 60 mm in length) were made from light-polymerized urethane dimethacrylate monomer with unidirectional, single-stranded, polymer preimpregnated E-glass fiber reinforcement. Six cylinders were stored in dry conditions and 6 in distilled water for 30 days before testing. Fatigue resistance was measured by a constant-deflection fatigue test with 1 mm of deflection across a specimen span of 11 mm for a maximum of 150,000 loading cycles. The resistance of the cylinder against deflection was measured (N) and the mean values of the force were compared by 1-way analysis of variance (alpha = .05). The flexural modulus (GPa) was calculated for the dry and water-stored cylinders for the first loading cycle. Scanning electron microscopy was used to assess the distribution of the fibers, and the volume percent of fibers and polymer were assessed by combustion analysis. RESULTS: The test cylinders did not fracture due to fatigue following 150,000 loading cycles. Flexural modulus at the first loading cycle was 18.9 (+/- 2.9) GPa and 17.5 (+/- 1.7) GPa for the dry and water-stored cylinders, respectively. The mean force required to cause the first 1-mm deflection was 33.5 (+/- 5.2) N and 37.7 (+/- 3.6) N for the dry and water stored cylinders, respectively; however, the differences were not significant. After 150,000 cycles the mean force to cause 1-mm deflection was significantly reduced to 23.4 (+/- 8.5) N and 13.1 (+/- 3.5) N, respectively (P < .0001). Scanning electron microscopy highlighted fiber- and polymer-rich areas within the specimens and indicated that individual fibers were well impregnated with resin. The combustion analysis studies identified the fiber content to be 35.9 vol%. CONCLUSION: The results of this study suggest that the fatigue resistance of the fiber-reinforced material examined was increased; however, the reduction in flexural modulus of fiber-reinforced composites may restrict their use where high rigidity is required, such as in removable partial denture clasps.

Air↗
PubMed2004

The effect of fiber reinforcement on the fracture toughness and flexural strength of provisional restorative resins.

STATEMENT OF PROBLEM: Fracture of provisional restorations is of concern, especially with long-span fixed partial dentures or areas of heavy occlusal stress. A number of different techniques for reinforcement of provisional restorations have been suggested; however, the effect of these techniques is largely unclear. PURPOSE: The aim of this study was to determine the fracture toughness and flexural strength of different types of provisional restoration resins reinforced with different commercially available fibers. MATERIAL AND METHODS: A total of 105 specimens were prepared in this study for each test; compact tensile specimens for the fracture toughness test and rectangular specimens for the flexural strength test. The specimens were divided into 3 groups according to the type of resin used, Jet, Trim, or Temphase (n=35), and then each group was divided into 7 subgroups (n=5) according to the type of fiber reinforcement, Construct, Fibrestick, Ribbond normal, Ribbond THM, Ribbond triaxial, or Fibrenet. Unreinforced specimens served as the control. Specimens were loaded in a universal testing machine until fracture. The mean fracture toughness (MPa.m(1/2)) and mean flexural strength (MPa) were compared by 1-way analysis of variance, followed by the Tukey standardized range test (alpha=.05). RESULTS: Fibrestick and Construct reinforcements showed a significant increase (P<.0001) in mean fracture toughness over unreinforced controls for all resins tested. Fibrestick increased the polymethyl methacrylate from 1.25+/-0.06 MPa.m(1/2) to 2.74+/-0.12 MPa.m(1/2); polyethyl methacrylate from 0.67+/-0.07 MPa.m(1/2) to 1.64+/-0.13 MPa.m(1/2); and bis-acryl from 0.87+/-0.05 MPa.m(1/2) to 1.39+/-0.11 MPa.m(1/2). Construct increased polymethyl methacrylate to 2.59+/-0.28 MPa.m(1/2); polyethyl methacrylate to 1.53+/-0.22 MPa.m(1/2); and bis-acryl to 1.30+/-0.13 MPa.m(1/2); however, there was no significant difference between Fibrestick and Construct reinforcements in the degree of reinforcement. Similarly the mean flexural strength values were significantly increased by different combinations of fiber and resin (P<.0001). CONCLUSION: The addition of fibers to provisional resin increased both fracture toughness and flexural strength.

Analysis of Variance↗
PubMed1998

A three-dimensional analysis of a fibre-reinforced aortic valve prosthesis.

Failure of synthetic heart valves is usually caused by tearing and calcification of the leaflets. It is postulated that leaflet fibre-reinforcement leads to a decrease of tears and perforations as a result of reduced stresses in the weaker parts of the leaflets. A three-dimensional finite element model of a reinforced three-leaflet valve prosthesis was developed to analyse the stress reduction. Different fibre reinforcements were investigated and the model responses were analysed for stresses that are expected to contribute to failure of fibre-reinforced valve prostheses. Results of these simulations show that, in peak stress areas of reinforced models, up to 60% of the maximum principal stresses is taken over by fibres and that, in some cases of reinforcement, a more homogeneous stress distribution is obtained.

Alkenes↗
PubMed1999

Metal-matrix interface in reinforced glass ionomers.

OBJECTIVE: In reinforced materials, interfacial bonding is critical for efficient transfer of stress from the matrix to the reinforcement. The goal of this study was to characterize the physical and chemical nature of this interface in three metal-reinforced glass ionomers. Two of them were commercial, ESPE-Ketac Silver (KS) and GC-Miracle Mix (MM), and the third, EX, was experimental. METHODS: The techniques of scanning electron microscopy (SEM) and infrared spectroscopy (IR) were used to accomplish the stated goal. SEM analysis utilized polished sections of set cylindrical specimens of each material prepared from their respective powder and liquid components. The glass and the liquid in EX were the same as in MM. The reinforcing agent in EX, 50% by weight, was an Ag-base spherical alloy similar in composition to that in MM. For EX, the alloy was oxidized to promote its bonding to the matrix. The specimens for IR study were prepared as follows. The metallic powders of each material were mixed with the corresponding liquid in excess, stored at 37 degrees C for 1 h, washed with warm water (60 degrees C), filtered and dried. The untreated metallic powders served as controls for IR analysis. RESULTS: SEM revealed a distinct halo shaped internal reaction layer surrounding each alloy particle in EX. A similar layer was not seen in MM and KS. The alloy-matrix interface was continuous and gap-free in EX. In contrast, gaps separating matrix from respective reinforcements were conspicuous features in MM and KS. The IR spectrum of the liquid treated EX alloy powder showed absorbency bands characteristic of unreacted carboxyl groups and carboxylate salts. These bands were absent in the IR spectra of all other powders--treated and untreated. SIGNIFICANCE: The absence of interfacial bonding in MM and KS demonstrated in this study provides a reason why these two materials, in spite of metal addition, have not proved to be any stronger or more durable than their metal-free counterparts. A means of creating interfacial bonding presented here could be useful in the design of improved reinforced glass ionomer materials.

Aluminum↗
PubMed2000

Flexural properties and impact strength of denture base polymer reinforced with woven glass fibers.

OBJECTIVES: The present investigation was undertaken to determine the reinforcing effect of woven glass fibers on deflection, flexural strength, flexural modulus and impact strength of acrylic denture base polymer. METHODS: Three silanized or unsilanized woven glass fibers were used. Specimens were made by heating the denture cure resin dough containing glass fibers, which were sheathed in the dough. Specimens with four different thicknesses and of five different types were made, incorporating the glass fiber. Three-point flexural test and flywheel type impact test were employed to determine the flexural properties and impact strength. RESULTS: When specimens contained unsilanized glass fiber, the flexural strength in specimens of 1 and 2 mm thickness and the impact strength in specimens of 2 mm thickness were higher than those of specimens without glass fiber (p < 0.01). On the contrary, the flexural strength and deflection in specimens reinforced with silanized glass fiber of 1 mm thickness were significantly higher (p < 0.01, p < 0.05) than those of unreinforced specimens. Further, the impact strength in specimens reinforced with silanized glass fiber of 2 mm thickness was significantly higher (p < 0.01) than that of unreinforced specimens. Statistically significant differences were found in the flexural strength (p < 0.05) and in the impact strength (p < 0.01) when specimens of 4 mm thickness were reinforced with two or three unsilanized glass fibers. SIGNIFICANCE: The reinforcement with glass fiber was effective in thin specimens, and the reinforcing effect increased with the increase of the number of glass fibers in the case of thick specimens.

Acrylic Resins↗
PubMed2000

Nicotinic mechanisms involved in the dopamine activating and reinforcing properties of ethanol.

Ethanol shares with all major dependence producing drugs the ability to activate brain mesocorticolimbic dopamine neurons, an important part of the brain reward systems. This dopamine activation may be involved in mediating the positive reinforcing effects of ethanol. The mechanisms of action of ethanol in its activation of this dopamine system remain, however, to be elucidated. A selective pharmacological interference with these mechanisms may offer a possibility to reduce the reinforcing properties of ethanol without simultaneously interfering with the reinforcing properties of natural rewards. Ethanol has been shown to directly influence the function of various ligand-gated ion-channels. Several of these are located on or nearby mesocorticolimbic dopamine neurons. One such receptor is the nicotinic acetylcholine receptor (nAChR). The present article reviews a series of investigations aimed at investigating whether nAChRs are involved in the dopamine activating and reinforcing properties of ethanol. To this end acute and chronic behavioral and neurochemical experiments were performed in mice and rats. The results obtained indicate that central nAChRs in the ventral tegmental area are involved in mediating the mesolimbic dopamine activating and reinforcing effects of ethanol. Furthermore, the ethanol-induced activation of these receptors is probably indirect, subsequent to a primary interference of ethanol in the nucleus accumbens. Moreover, subchronic nicotine treatment enhances the reinforcing and dopamine activating properties of ethanol. This long-term effect may, however, derive from autonomic adaptations in response to intermittent blockade of peripheral nAChRs (rather than from intermittent stimulation of central receptors), and appears to be associated with development of a disinhibitory behavior that could involve also other neurotransmitters, e.g. serotonin. Taken together, these findings could provide a neurobiological explanation to the often observed co-abuse of nicotine and ethanol in man. Furthermore, since the behavioral models applied previously have predicted therapeutic drug effects in the clinic, the results suggest that selective blockade of the ventral tegmental nAChRs that are involved in the above effects may provide a new pharmacological alternative in the treatment of alcoholism.

Alcohol Drinking↗
PubMed1999

Effects of excitotoxic lesions of the basolateral amygdala on conditional discrimination learning with primary and conditioned reinforcement.

Rats with excitotoxic lesions of the basolateral amygdala (BLA) were not impaired in the acquisition of an appetitive visuospatial conditional discrimination between stimuli varying in temporal frequency that has previously been shown to be sensitive to the effects of lesions of the striatum and cingulate cortex. After asymptotic performance was attained, discrimination was reinforced according to a fixed ratio (FR) schedule under which n presentations of sucrose were provided following n correct responses; each correct response also being reinforced immediately by a light acting as a conditioned reinforcer. Under these conditions of reinforcement when FRn=5, BLA-lesioned rats initially showed transient impairments in several aspects of performance, but rapidly attained control levels over subsequent test sessions. No further impairments occurred when FRn=10/20. However, in various conditions of extinction, further differences in performance were revealed between the BLA-lesioned and control groups, notably a significantly enhanced resistance to extinction when both sucrose and conditioned reinforcement were omitted. The results are discussed in terms of limbic-striatal mechanisms in the control of discrimination learning and the possible role of the amygdala in the mediation of different aspects of conditioned reinforcement.

Amygdala↗
PubMed2003

Effect of glass fibre reinforcement on residual methyl methacrylate content of denture base polymers.

OBJECTIVES: Residual methyl methacrylate (MMA) content in unreinforced and in glass fibre reinforced, heat-polymerized (long- and short-term terminal boiled and conventionally) autopolymerized (at room temperature and in water at 60 degrees C) and microwave-polymerized (3min at 500W) denture base polymers after processing were compared. METHODS: Ten specimens were prepared for each curing cycle (five unreinforced and five reinforced) adding up to a total of 60. Residual MMA content was determined using high-performance liquid chromatography. Data were analysed with one-way ANOVA followed by Tukey HSD and Paired Samples tests. RESULTS: For unreinforced and reinforced groups; residual MMA content succesively ranked from lowest to highest in; long- and short-term terminal boiled heat-polymerized, microwave-polymerized, autopolymerized specimens processed in water at 60 degrees C and conventionally heat- and autopolymerized specimens processed at room temperature. Generally residual MMA was found more in glass fibre reinforced test groups than unreinforced groups. However, when reinforced residual MMA increased significantly in long- and short-term terminal boiled heat- (P<0.05) and microwave-polymerized test groups (P<0.01). CONCLUSIONS: Although this increase was significant, lowest residual MMA content was found succesively in reinforced long- and short-term terminal boiled heat-polymerized and microwave-polymerized like in unreinforced groups.

Acrylic Resins↗
PubMed2003

Upcoming food-pellet reinforcement alters rats' lever pressing for liquid sucrose delivered by a progressive-ratio schedule.

The present study investigated whether rats' responding for liquid-sucrose reinforcement delivered by a progressive-ratio (PR) schedule would be altered by the addition of food-pellet reinforcement available subsequent to the PR schedule. In Experiment 1, six rats lever pressed for 1% sucrose reinforcers delivered by a PR 3 schedule. In Experiment 2, six rats lever pressed for 5% sucrose delivered by a PR 5 schedule. In both experiments, baseline sessions consisted of 40min of exposure to the PR schedule. In the first treatment condition, a 25-min period of food-pellet reinforcement, delivered by a random-interval 60-s schedule, immediately followed the initial 40min. In the second treatment condition, the 25-min period of food-pellet reinforcement became available when 10min elapsed without the subject completing a ratio on the PR schedule. Results from both experiments showed that upcoming food-pellet reinforcement increased the number of ratios subjects completed on the PR schedule. Portions of the present results represent a partial replication of results reported by Baron and Derenne [J. Exp. Anal. Behav. 73 (2000) 291], who used a similar procedure. They also augment a growing body of research on positive induction.

Journal Article↗
PubMed2002

PLGA bone plates reinforced with crosslinked PPF.

In this study a matrix of poly(propylene fumarate) (PPF) was crosslinked with N-vinylpyrrolidone (NVP), 2-hydroxyethylmethacrylate (HEMA), or a mixture of NVP and ethyleneglycol dimethacrylate (EGDMA) in the presence of poly(lactide-co-glycolide) (PLGA) to reinforce and preserve the form of PLGA bone plates. The degree of crosslinkage varied depending on the crosslinker as shown by the rapid and almost complete leaching of NVP upon incubation in phosphate buffered saline at 37 degrees C in 900 h and retention of 92% of HEMA. With the reinforced bone plates extracted for 72 h at room temperature methylene chloride, the extracted PLGA from NVP/PPF, NVP-EGDMA/PPF, and HEMA/PPF were 75.42% (w/w), 59.52% (w/w), and 30.86% (w/w), respectively. The flexural modulus and compressive strength of the crosslinked PPF reinforced bone plates were higher than that of the unreinforced bone plate. Atomic force microscopy showed that NVP/PPF reinforced PLGA bone plates eroded substantially (a mean surface roughness of 19.319 nm) whereas NVP-EGDMA-PPF reinforced bone plate showed a distinct crystalline organization (and a higher roughness, 43.525 nm). In conclusion, we propose the consideration of NVP-EGDMA/PPF reinforced PLGA as a biodegradable orthopedic implant material that has a lower likelihood of warping or failing catastrophically than the currently available materials.

Journal Article↗
PubMed1999

The reinforced laryngeal mask in paediatric outpatient dental surgery.

One hundred and twenty ASA I and II grade children aged 2-9 years scheduled for outpatient dental extractions under general anaesthesia were studied. They were allocated randomly to one of three groups for airway management: group R had anaesthesia with a reinforced laryngeal mask airway, group L with a standard laryngeal mask airway and group N with a nasal mask. Anaesthesia was induced in all children using halothane in 50% nitrous oxide with oxygen and maintained on halothane in 67% nitrous oxide with oxygen. An Ayre's T-piece with Jackson-Rees modification was used. The incidence of airway obstruction was significantly lower and surgical access significantly better with the reinforced laryngeal mask airway when compared with the standard laryngeal mask airway. However, the reinforced laryngeal mask airway was significantly more difficult to insert when compared with the standard laryngeal mask airway. On comparing the reinforced laryngeal mask airway with the nasal mask, there were significantly fewer episodes of airway obstruction, better oxygen saturation, less increase in heart rate and fewer arrhythmias in the reinforced laryngeal mask airway group. Total time for the procedures was the same for all three groups. Thus, the reinforced laryngeal mask airway was found to be a favourable alternative to the standard laryngeal mask airway and nasal mask for paediatric outpatient dental extractions.

Airway Obstruction↗
PubMed2001

Adaptation of acrylic dentures reinforced with metal wire.

The aim of this study was to reveal the effect of metal wire on the adaptation of the denture reinforced with it. Forty maxillary dentures were made with two polymerization systems (DS system and SR-Ivocap system). The dentures were divided into two groups: (1) the unreinforced dentures (control) and (2) the dentures reinforced with metal wire 1.0 mm in diameter. Discrepancies between the denture base and the stone cast were measured at five points immediately after polymerization and after a 30-day immersion in water. The data were analysed using a two-way or one-way ANOVA test. Dentures reinforced with metal wire exhibited significantly lower adaptation to the stone cast than the unreinforced ones for each polymerization system. Immersion in water did not affect the adaptation of dentures reinforced with metal wire for each polymerization. Unreinforced dentures made by the DS system had significantly smaller discrepancies compared with the dentures processed with the SR-Ivocap system. The adaptation of the dentures reinforced with metal wire decreased in comparison with the unreinforced ones regardless of the polymerization method. This should be considered when metal wire is used clinically as reinforcement.

Acrylic Resins↗
PubMed2003

Reinforced interferon alpha-2b and ribavirin is more effective than standard combination therapy in the retreatment of chronic hepatitis C previously nonresponsive to interferon: a randomized trial.

Interferon-alpha (IFN) monotherapy results in sustained virological clearance in a minority of patients with chronic hepatitis C. The aim of this study was to assess the effect of a reinforced regimen combining ribavirin and high-dose IFN for 48 weeks compared with a nonreinforced regimen combining a standard IFN regimen and ribavirin for 24 weeks in nonresponders with chronic hepatitis C. A total of 231 patients with chronic hepatitis C and previous nonresponse to IFN monotherapy were randomized. The reinforced group (n = 114) received IFN-2b 6 million units (MU) thrice weekly (TIW) and ribavirin for 48 weeks, and the nonreinforced group (n = 117) received IFN-2b 3 MU TIW and ribavirin for 24 weeks. The main outcome measure was a sustained virological response, defined as negative serum hepatitis C virus (HCV)-RNA 24 weeks following the end of treatment. This endpoint was determined in 98 patients of the reinforced group and 105 patients of the nonreinforced group. At the end of follow-up, a sustained virological response was observed in 29 of the 98 patients (29.6%) in the reinforced group vs 16 of the 105 patients (15.2%) in the nonreinforced group (P = 0.014). In multivariate analysis, factors associated with a sustained virological response were treated with a reinforced regimen [odds ratio (OR) 2.9; P = 0.06] and genotype 2 or 3 (OR 8.8; P < 0.0002). A total of 160 patients had paired biopsies before and after treatment. Histological activity improvement was observed in 32 of 80 patients (40%) and fibrosis worsening in 26 of 80 patients (33%) in the reinforced group vs 13 of 80 (16%) and 19 of 80 (24%) in the nonreinforced group (P = 0.30 and 0.20, respectively). Hence in nonresponders, a high-dose 48-week regimen of IFN and ribavirin combination was more effective than a regimen with interferon at lower dose and ribavirin for 24 weeks only.

Adolescent↗
PubMed2001

Fracture force, deflection at fracture, and toughness of repaired denture resin subjected to microwave polymerization or reinforced with wire or glass fiber.

STATEMENT OF PROBLEM: The ultimate goal of denture repair is to restore the denture's original strength and avoid further fracture. The best materials and methods for repair have not been conclusively determined. PURPOSE: This study investigated the fracture force, deflection at fracture, and toughness of a heat-polymerized denture base material repaired with heat-polymerized resin, autopolymerized resin alone, or autopolymerized resin with glass fiber or wire reinforcement. MATERIAL AND METHODS: Eight groups were evaluated: 6 with autopolymerized resin repairs, 1 with heat-polymerized resin repairs, and a control group of intact specimens. The 6 autopolymerized resin groups included 1 group with no reinforcement, 1 treated with microwave irradiation after polymerization, 2 with monolayer or multilayer glass fiber reinforcement, and 2 with round or braided wire reinforcement. Each group consisted of 12 specimens. The experimental specimens were cut, and a 3-mm butt joint gap was repaired as indicated by the group assignment. A 3-point bending test was used to determine the fracture force, deflection at fracture, and toughness of the specimens. The data were analyzed with 1-way analysis of variance and the Tukey post-hoc test (alpha=.05). RESULTS: The fracture force (28.4 to 73.4 N), deflection (1.6 to 3.8 mm), and toughness (0.02 to 0.13 J) values for all repaired groups were significantly lower than those for the control group (82.79 N, 4.4 mm, and 0.16 J, respectively), with one exception: the mean fracture force of specimens reinforced with round wire (102.9 N). Failure mode was always adhesive, meaning that fracture occurred between the denture base and repair resin. CONCLUSION: Among the repair treatments tested, the most effective was microwave-irradiated, autopolymerized resin reinforced with round wire or monolayer glass fiber ribbon.

Analysis of Variance↗
PubMed1980

Wall reinforcement with highly porous Dacron mesh in aortic surgery.

Wall reinforcement with highly porous synthetic Dacron mesh was devised and evaluated in various aortic operations. Excellent attachment of the mesh to the aortic wall, good preservation of pliability of the aorta, and efficient pressure resistance with minimal scar tissue formation were the usual findings. This type fo wall reinforcement was employed in 60 patients for the following indications: 1) prevention of suture line complications; 2) wall reinforcement of aortic aneurysm without resection; 3) reinforcement of adventitia or autogenous vein following thromboendarterectomy. It is concluded that reinforcement with highly porous synthetic Dacron mesh should be superior to reinforcement with conventional prosthetic Dacron graft.

Aorta↗
PubMed2004

Flycatcher song in allopatry and sympatry--convergence, divergence and reinforcement.

The theory of reinforcement predicts that natural selection against the production of unfit hybrids favours traits that increase assortative mating. Whether culturally inherited traits, such as bird song, can increase assortative mating by reinforcement is largely unknown. We compared songs of pied (Ficedula hypoleuca) and collared flycatchers (F. albicollis) from two hybrid zones of different ages with songs from allopatric populations. Previously, a character divergence in male plumage traits has been shown to reinforce premating isolation in sympatric flycatchers. In contrast, we find that the song of the pied flycatcher has converged towards that of the collared flycatcher (mixed singing). However, a corresponding divergence in the collared flycatcher shows that the species differences in song characters are maintained in sympatry. Genetic analyses suggest that mixed song is not caused by introgression from the collared flycatcher, but rather due to heterospecific copying. Circumstantial evidence suggests that mixed song may increase the rate of maladaptive hybridization. In the oldest hybrid zone where reinforcement on plumage traits is most pronounced, the frequency of mixed singing and hybridization is also lowest. Thus, we suggest that reinforcement has reduced the frequency of mixed singing in the pied flycatcher and caused a divergence in the song of the collared flycatcher. Whether a culturally inherited trait promotes or opposes speciation in sympatry may depend on its plasticity. The degree of plasticity may be genetically determined and accordingly under selection by reinforcement.

Animals↗
PubMed1993

Ventral tegmental microinjections of quinpirole decrease ethanol and sucrose-reinforced responding.

The effects of microinjections in the ventral tegmental area (VTA) of the dopamine D2/D3 agonist quinpirole on ethanol- and sucrose-reinforced responding were tested. Two groups of Long-Evans rats were trained to lever press on a fixed-ratio 4 schedule with 10% ethanol (v/v) (n = 8) and 75% sucrose (w/v) (n = 10) presented as the reinforcer. Weekly bilateral injections of quinpirole were tested in the ethanol group (0.0, 0.001, 0.01, 0.1, and 1.0 micrograms/microliters) and sucrose group (0.0, 0.01, 0.1, 1.0, and 10.0 micrograms/microliters). Quinpirole dose dependently decreased ethanol- and sucrose-reinforced responding, but the dose-effect curve for sucrose was shifted two orders of magnitude to the right of the ethanol curve. Temporal response patterns during control sessions for both reinforcers were characterized by initial high rates that terminated after approximately 10 min. VTA injections of quinpirole dose dependently delayed the onset of the first response and the initial high rate period, and resulted in an early termination of responding following onset. These data support the hypothesis that dopamine activity in the VTA is involved in the regulation of ethanol-reinforced responding in a manner similar to that of other reinforcers.

Animals↗