Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “PYRROLIDONES”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48Linked to original sources

Complex formation of protein with different water-soluble synthetic polymers.

The formation of protein-polymer complexes was studied in an aqueous system using dynamic light scattering (DLS) and static light scattering (SLS) as the main experimental tools. Human serum albumin (HSA) was used as a protein and complexed with four representative water-soluble polymers: poly(N-isopropylacrylamide) (PNIPA), poly(ethylene glycol) (PEG), poly(vinyl pyrrolidone) (PVP), and poly(vinyl alcohol) (PVA). The first three molecular weights were within 420,000-540,000 and the last one was 270,000. The complexation was performed at 25 degrees C in 0.01 M NaCl solution adjusted to pH 3 with HCl as a function of mixing ratio (rm; molar ratio of polymer to HSA). From SLS experiments, we determined the molecular weight of the resulting complexes, from the value of which the number (nb) of bound proteins per polymer was estimated. It was found that each polymer forms an intrapolymer complex over a wide range of rm (1.2 > or = rm > or = 0.01). Then, a marked decrease in nb with increasing rm was found. Over the whole rm range, the HSA-PNIPA complex exhibited a large nb value, as compared with the other three complexes whose nb values at the same rm were close to one another. Both the hydrodynamic radius (Rh) by DLS and the radius of gyration (Rg) by SLS for the complexes of PNIPA, PVP, and PVA decreased and then reached a constant value as nb decreased with increasing rm. In the PEG system, however, there were a few changes in Rh and Rg with nb. The Rg/Rh ratio, as an indication of chain expansion, was found to increase with decreasing nb in the PNIPA system. The complexes of PVA and PVP displayed a similar tendency, although the magnitude of the increasing trend was smaller than that of the PNIPA complex. In contrast, the Rg/Rh ratio of the PEG complex hardly varied depending on nb. These results were discussed in connection with the differences of physicochemical properties among four water-soluble polymers.

Acrylic Resins↗

Preparation of thioamide building blocks via microwave-promoted three-component kindler reactions.

A microwave-enhanced variation of the Kindler thioamide synthesis is introduced. Taking advantage of the sealed vessel capabilities of a dedicated single-mode microwave reacto,r a diverse selection of 13 aldehyde and 12 amine precursors was utilized in the construction of a representative 34-member library of substituted thioamides. The three-component condensations of aldehydes, amines, and elemental sulfur were carried out using 1-methyl-2-pyrrolidone (NMP) as solvent employing microwave flash heating at 110-180 degrees C for 2-20 min. A simple workup protocol allows the isolation of synthetically valuable primary, secondary, and tertiary thioamide building blocks in 83% average yield and >90% purity.

Benzaldehydes↗

A general treatment of solubility. 1. The QSPR correlation of solvation free energies of single solutes in series of solvents.

We present an extended QSPR modeling of solubilities of about 500 substances in series of up to 69 diverse solvents. The models are obtained with our new software package, CODESSA PRO, which is furnished with an advanced variable selection procedure and a large pool of theoretically derived molecular descriptors. The squared correlation coefficients and squared standard deviations (variances) range from 0.837 and 0.1 for 2-pyrrolidone to 0.998 and 0.02 for dipropyl ether, respectively. The predictive power of the models was verified by using the "leave-one-out" cross-validation procedure. The QSPR models presented are suitable for the rapid evaluation of solvation free energies of organic compounds.

Journal Article↗

Synthesis, crystal structure, and photochromism of novel two-dimensional supramolecular networks based on Keggin-type polyoxoanion and lanthanide coordination cations.

Three new compounds [Ln(NMP)(4)(H(2)O)(4)][H(x)()GeMo(12)O(40)].2NMP.3H(2)O (Ln = Ce(IV) (1), Pr(IV) (2), x = 0; Ln = Nd(III) (3), x = 1; NMP = N-methyl-2-pyrrolidone) have been prepared in aqueous solution and characterized by elemental analyses, IR, UV-vis, and TG analyses. The single crystal X-ray diffraction shows that all three compounds are isostructural. In their structures, an interesting two-dimensional supramolecular network is constructed by the [GeMo(12)O(40)](4)(-) anion and [Ln(NMP)(4)(H(2)O)(4)](3+/4+) cation building blocks via hydrogen-bonding interactions, exhibiting the porous structure. Upon irradiation with UV light, the crystals of 1-3 show photochromic behavior.

Journal Article↗

Synthesis and characterization of bismuth single-crystalline nanowires and nanospheres.

A facile solution-phase process has been demonstrated for the selective preparation of single-crystalline bismuth nanowires and nanospheres by reducing sodium bismuthate with ethylene glycol in the presence of poly(vinyl pyrrolidone) (PVP) or acetone. Bismuth nanobelts and Bi/Bi(2)O(3) nanocables could be also obtained by changing some reaction parameters. Various techniques such as XRD, EDXA, SEM, TEM, HRTEM, and FT-IR have been used to investigate the physical characteristics of these low-dimensional bismuth nanostructures.

Journal Article↗

Synthesis and characterization of gels from polyallylamine and carbon dioxide as gellant.

The synthesis and characterization of a novel series of polymer gels are reported. They are formed at ambient temperatures by bubbling CO(2) through solutions of polyallylamine (PAA; a latent gellant) in several organic liquids, including aliphatic alcohols and 1-methyl-2-pyrrolidone. The stabilities of the alcohol gels, as indicated by the (irreversible) degelation temperature, T(g)(dt), were strongly dependent on the number of carbon atoms (C(n)) in the alkyl chains of the alcohol liquids. The mechanism of formation and the microenvironmental properties of PAA-based gels containing a small amount of a pH-sensitive probe, 2,6-naphthalenedicarboxylic acid (2,6-NDCA), have been probed using static and dynamic fluorescence measurements. A measurable pH change and significant alterations to the fluorescence spectra were coincident with gelation of PAA solutions in 1-butanol as CO(2) was bubbled through, and the fluorescence spectra were monitored over several hours until no further changes were detected. Analyses of dynamic fluorescence decay histograms indicate the presence of three decay times due to different microenvironments where the 2,6-NDCA molecules are located.

Journal Article↗

Debundling and dissolution of single-walled carbon nanotubes in amide solvents.

Wet chemical methods involving ultrasound and amide solvents were used to purify and separate large bundles of single-walled carbon nanotubes (SWNTs) into individual nanotubes that could then be transported to silicon or mica substrates. The SWNTs studied were produced by the arc-discharge process. Dry oxidation was used in an initial step to remove amorphous carbon. Subsequently, two acid purification schemes were investigated (HCl- and HNO(3)-reflux) to remove the metal growth catalyst (Ni-Y). Finally, ultrasonic dispersion of isolated tubes into either N,N-dimethylformamide (DMF) or N-methyl-2-pyrrolidone (NMP) was carried out. Raman scattering, atomic force microscopy (AFM), and electron microscopy were used to study the evolution of the products. Raman scattering was used to probe possible wall damage during the chemical processing. We found that both HCl and HNO(3) could be used to successfully remove the Ni-Y below approximately 1 wt %. However, the HNO(3)-reflux produced significant wall damage (that could be reversed by vacuum annealing at 1000 degrees C). In the dispersion step, both amide solvents (DMF and NMP) produced a high degree of isolated tubes in the final product, and no damage during this dispersion step was observed. HNO(3)-refluxed tubes were found to disperse the best into the amide solvents, perhaps because of significant wall functionalization. AFM was used to study the filament diameter and length distributions in the final product, and interesting differences in these distributions were observed, depending on the chemical processing route.

Journal Article↗

Unique oxidation reaction of amides with pyridine-N-oxide catalyzed by ruthenium porphyrin: direct oxidative conversion of N-acyl-L-proline to N-acyl-L-glutamate.

Oxidations of alkanes, alkenes, and aromatic rings with pyridine N-oxides are efficiently catalyzed by ruthenium porphyrins under mild conditions. We show here that the oxidation of N-acyl cyclic amines with RuIVtetraarylporphyrin dichloride-2,6-substituted pyridine N-oxides directly gives N-acyl amino acids in modest to good yield via oxidative C-N bond cleavage. N-Acylpyrrolidines and N-acylpiperidines were converted to N-acyl-gamma-aminobutyric acids and N-acyl-delta-aminovaleric acids, respectively. This type of reaction is a novel one in which the C-N bond is cleaved selectively at the less substituted carbon. Notably, the proline residue in proline-containing peptides was selectively converted to glutamate. A large intramolecular kinetic isotope effect (kH/kD = 9.8) was observed in the oxidation of N-benzoyl[2,2,-d2]pyrrolidine, indicating that the reaction should involve an alpha-hydrogen atom abstraction process as the rate-determining step. N-Acylcarbaldehyde, the putative intermediate ring-opened form of alpha-hydroxylated N-acyl cyclic amine, was readily oxidized with the oxidizing system to afford the corresponding N-acylamino acid in good yield. Further, lactams (1-methyl-2-pyrrolidone and 1-methyl- 2-piperidone) were also oxidized to give the corresponding imides (1-methylsuccinimide and 1-methylpiperidine-2,6-dione).

Amines↗

Single-crystal nanowires of platinum can be synthesized by controlling the reaction rate of a polyol process.

Platinum nanowires of approximately 100 nm in length and approximately 5 nm in diameter have been synthesized by reducing H(2)PtCl(6) with ethylene glycol in the presence of poly(vinyl pyrrolidone) (PVP) and a trace amount of Fe(3+) or Fe(2+). The wires were generated at the final stage of the synthesis, which involved the formation of several intermediate species. The Fe(3+) or Fe(2+) ions had dual functions in the synthesis: they induced aggregation of Pt nanoparticles into larger structures that served as the nucleation sites, and they greatly reduced the reaction rate and supersaturation level to induce anisotropic growth. The reaction mechanism was studied by X-ray photoelectron spectroscopy (XPS) and UV-vis spectral analysis. The Pt nanowires could be readily separated from the surfaces of the agglomerates by sonication and obtained as pure samples by centrifugation.

Journal Article↗

Size-specific catalytic activity of polymer-stabilized gold nanoclusters for aerobic alcohol oxidation in water.

Gold nanoclusters (phi = 1.3 nm) stabilized by poly(N-vinyl-2-pyrrolidone) (Au:PVP NCs) readily oxidize benzylic alcohols to the corresponding aldehydes and/or carboxylic acids under ambient temperature in water. Kinetic measurement revealed that smaller Au:PVP NCs exhibit higher catalytic activity than larger (9.5 nm) homologues and, more surprisingly, than Pd:PVP NCs of comparable size (1.5 and 2.2 nm). On the basis of the marked difference in the kinetic isotope effect and activation energy between Au:PVP and Pd:PVP NCs, a reaction mechanism for alcohol oxidation catalyzed by Au:PVP NCs is proposed in which a superoxo-like molecular oxygen species adsorbed on the surface of the small Au NCs abstracts a hydrogen atom from the alkoxide.

Journal Article↗

Kinetically controlled synthesis of triangular and hexagonal nanoplates of palladium and their SPR/SERS properties.

The rapid reduction of Na(2)PdCl(4) by ethylene glycol in the presence of poly(vinyl pyrrolidone) (PVP) has recently been demonstrated as a convenient method of generating Pd cubooctahedra and twinned nanoparticles. Here we describe a new procedure where Pd triangular or hexagonal nanoplates could be selectively synthesized by manipulating the reduction kinetics of the polyol process. More specifically, the reduction rate was substantially reduced through the introduction of Fe(III) species and the O(2)/Cl(-) pair, two wet etchants for Pd(0). The etching power of the O(2)/Cl(-) pair could be further enhanced by adding an acid to lower the pH of the reaction solution. Unlike the previously reported synthesis of Ag and Au nanoplates, light was found to have no indispensable role in the formation of Pd nanoplates. Both triangular and hexagonal nanoplates of Pd exhibited surface plasmon resonance (SPR) peaks in the visible region, and their positions matched with the results of discrete dipole approximation (DDA) calculation. Thanks to their sharp corners and edges, these Pd nanoplates could serve as active substrates for surface-enhanced Raman scattering (SERS).

Journal Article↗

Highly stereoselective asymmetric Pummerer reactions that incorporate intermolecular and intramolecular nonbonded S...O interactions.

New chiral sulfoxides (R(S),S)-3, (S(S),S)-3, (R(S),S)-4, and (S(S),S)-4 and known chiral sulfoxides (R(S))-5, (R(S))-6, and (R(S))-7 were synthesized, and the stereochemistry of the new sulfoxides (R(S),S)-3 and (R(S),S)-4 was determined by X-ray crystallographic analysis. In their crystallographic structures, the intramolecular nonbonded S...O close contacts were recognized. Analyses of several sulfoxide complexes including rac-11 with N,N-dimethylacetamide (DMAC) or N-methyl-2-pyrrolidone (NMP) in a MeOH solution utilizing cold-spray ionization mass spectrometry provided, for the first time, direct information for intermolecular nonbonded S...O interactions between sulfoxides and amide (or lactam) in a solution. Highly diastereoselective and enantioselective Pummerer reactions based on the concept of intermolecular and intramolecular nonbonded S...O interactions were performed by treatment of several chiral sulfoxides (R(S), S)-3, (S(S), S)-3, (R(S), S)-4, (S(S), S)-4, (R(S))-5, (R(S))-6, and (R(S))-7 with acetic anhydride and trimethylsilyl triflate (TMSOTf) in DMAC, NMP, N,N-dimethylformamide, and N-formylpiperidine. Mechanistic studies on these facile stereoselective Pummerer reactions revealed the necessity for the amide/TMSOTf complex, such as 26 or 27, to be an efficient activation reagent for Ac(2)O and a trapping reagent for the released acetate ion, and that DMAC and NMP had a positive effect on this highly stereoselective chiral transfer reaction.

Journal Article↗

Facile synthesis of gold-silver nanocages with controllable pores on the surface.

Gold-silver alloy nanocages with controllable pores on the surface have been synthesized via galvanic replacement reaction between truncated Ag nanocubes and aqueous HAuCl4. Unlike in the previous studies, the initiation of replacement reaction started in a controllable way, simultaneously from eight corners of the truncated Ag nanocubes where {111} facets were exposed. The formation of cubic nanocages with pores at all the corners was determined by the capping agent, poly(vinyl pyrrolidone) (PVP), which preferentially covered the {100} facets of a truncated Ag nanocube.

Gold↗

Investigation of the presence of OH radicals in electrolyzed NaCl solution by electron spin resonance spectroscopy.

In the anode side of a two-chamber electrolyzer, electrolysis of a NaCl solution generates acidic electrolyzed oxidizing (EO) water, which exhibits bactericidal effects against a large number of pathogens. This study was undertaken to investigate whether OH radical species are present in EO water or are formed when EO water reacts with iron ions. Electron spin resonance spectroscopy (ESR) coupled with the spin trapping technique was used for the detection of free radicals. Samples of EO water were collected at 0.5, 1, 2, 3, and 5 min of electrolysis and immediately mixed with the spin trapping agent 5,5-dimethyl-1-pyrroline-N-oxide (DMPO). The 5,5-dimethyl-2-hydroxypyrrolidine-N-oxyl (DMPO-OH) spin adduct, characteristic of OH radicals, was not observed. Starting with 2-min electrolysis, a seven-line spectrum characteristic of 5,5-dimethyl-2-pyrrolidone-N-oxyl (DMPOX) was formed. The reactions of EO water with Fe3+ and Fe2+ in the presence of DMPO yielded the spin adduct DMPO-OH. However, the addition of OH radical scavengers (ethanol and methanol) did not generate the characteristic DMPO-alkyl spin adducts. This indicated that the DMPO-OH spectrum was due to a nucleophilic addition of water to DMPO and not to trapping of OH radicals.

Disinfectants↗

Formation of natural indigo derived from woad (Isatis tinctoria L.) in relation to product purity.

There is an increasing commercial demand for naturally sourced indigo that meets the purity standards set by the synthetic product. This study concerns the indigo made from leaves of woad (Isatis tinctoria L.), and in particular its interaction with particulate impurities arising from soil and plant materials. Also, a more reliable method using N-methyl-2-pyrrolidone has been developed for the spectrophotometric determination of indigo. In a novel application of fluorescence spectroscopy, indoxyl intermediates in indigo formation are shown to be stable for minutes. The main indigo precursor from woad can be adsorbed onto Amberlite XAD16 in conformity with a Langmuir isotherm, but indigo precursors break down on this and other resin beads to yield indigo and red compounds. Indigo made from indoxyl acetate aggregates into particles, the size distribution of which can be modified by the inclusion of a fine dispersion of calcium hydroxide. Bright field microscopy of indigo products made under defined conditions and scanning electron microscopy combined with energy-dispersive X-ray analysis reveal the relationship of indigo with particulate materials. A model illustrating the interaction of indigo with particulate contaminants is developed on the basis of the results obtained, and recommendations are made for improving the purity of natural indigo.

Indigo Carmine↗

Development of two enzyme-linked immunosorbent assays for detection of endosulfan residues in agricultural products.

Two competitive immunoassays, a laboratory assay based on microwell plates and a field test based on the use of polystyrene tubes, have been developed for the detection of endosulfan in agricultural products. The limit of detection for the microwell plate format was 0.8 +/- 0.1 microg/kg, and the limit of detection for the tube format was 1.6 +/- 0.2 microg/kg. A simple, rapid, and efficient extraction method was employed, and 76-112% recoveries of spiked samples were obtained. Methanol extracts of some agricultural product samples such as grape, carrot, spinach, and tobacco could be analyzed directly by immunoassay after dilution in 0.5% fish skin gelatin-phosphate buffered saline. In contrast, extracts of green tea caused significant interference in the assay, and a number of simple cleanup methods were ineffective in removing interference. However, use of the coagulating reagent polyvinyl pyrrolidone removed the matrix effect effectively. For the validation of the enzyme-linked immunosorbent assay (ELISA) tests, samples were analyzed by ELISA and gas chromatography (GC) after solid phase extraction. The relationship between data obtained using the tube assay and microwell assay was good (the lowest r(2) value was 0.94), and also, the immunoassay assay data correlated well with data obtained from GC analysis (the lowest r(2) value was 0.93). The developed immunoassay methods are the suitable methods for the rapid quantitative and reliable determination of endosulfan residues in agricultural products.

Camellia sinensis↗

Reactivity of lysine moieties toward an epoxyhydroxylinoleic acid derivative: aminolysis versus hydrolysis.

Epoxyols are generally accepted as crucial intermediates in lipid oxidation. The reactivity of tert-butyl (9R,10S,11E,13S)-9, 10-epoxy-13-hydroxy-11-octadecenoate (11a,b) toward lysine moieties is investigated, employing N(2)-acetyllysine 4-methylcoumar-7-ylamide (12) as a model for protein-bound lysine. The prefixes R and S denote the relative configuration at the respective stereogenic centers. Independent synthesis and unequivocal structural characterization are reported for 11a,b, its precursors, and tert-butyl (9R,10R,11E, 13S)-10-(¿5-(acetylamino)-6-[(4-methyl-2-oxo-2H-chromen-7-yl)amino ]-6 -oxohexyl¿amino)-9,13-dihydroxy-11-octadecenoate (13a-d). Reactions of 11a,b and 12 in 1-methyl-2-pyrrolidone (MP) and MP/water mixtures at pH 7.4 and 37 degrees C for 56 days show formation of the aminols 13a-d to be favored by an increased water content. The same trend is observed for hydrolytic cleavage of 11a,b to tert-butyl (E)-9,10, 13-trihydroxy-11-octadecenoate (14) and tert-butyl (E)-9,12, 13-trihydroxy-10-octadecenoate (15). Under the given conditions, aminolysis proceeds via an S(N)2 substitution, in contrast with the S(N)1 process for hydrolysis. In the MP/water (8:2) incubation, 15. 8% of 12 has been transformed to 13a-d and 10.5% of 11a,b hydrolyzed to the regioisomers 14 and 15 after 8 weeks, respectively. Aminolysis of alpha,beta-unsaturated epoxides by lysine moieties therefore is expected to be an important mode of interaction between proteins and lipid oxidation products.

Hydrolysis↗

Volatile compounds produced from monosodium glutamate in common food cooking.

A mixture of soybean oil and/or water, sugar and/or monosodium glutamate (MSG) was water-boiled or oil-heated at 100, 120, 140, 160, or 170 degrees C, respectively, and volatile compounds produced were isolated by solid-phase microextraction and then identified by GC and GC/MS. Oxidative thermal degradation products of fatty acids (OTDPFA) were the major volatile compounds detected for all water-boiled samples. When MSG and sugar were heated together, 2, 5-dimethyl pyrazine and methyl pyrazine were also detected at or after 160 min heating. Water added in soybean oil increased OTDPFA production. In oil-heated samples of soybean oil alone, soybean oil with MSG, and soybean oil with sugar, OTDPFA were also the major compounds found. The samples containing MSG also produced 2-pyrrolidone, and the samples containing sugar also produced furfural and 5-hydroxy methyl furfural. The samples containing soybean oil, sugar, and MSG produced 23 pyrazines, OTDPFA, and gamma-butyrolactone as the major volatile compounds. The contents of OTDPFA were lower in MSG plus sugar and MSG-added samples, and it is postulated that antioxidant activities were produced in cooking.

Chromatography, Gas↗