Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Fluorenes”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48Linked to original sources
PubMed2003

Attaching perylene dyes to polyfluorene: three simple, efficient methods for facile color tuning of light-emitting polymers.

The emission color of fluorene-based polymers can be facilely tuned across the whole visible spectrum by copolymerization with perylene dyes. Methods are demonstrated for incorporation of the dyes in the polymer mainchain, at the chain termini, or as side chains. Efficient energy transfer causes the emission to come solely from the dye units. Efficient LEDs have been made from the copolymers with dyes in the mainchain.

Journal Article↗
PubMed2003

High-efficiency red-light emission from polyfluorenes grafted with cyclometalated iridium complexes and charge transport moiety.

We report a new route for the design of electroluminescent polymers by grafting high-efficiency phosphorescent organometallic complexes as dopants and charge transport moieties onto alky side chains of fully conjugated polymers for polymer light-emitting diodes (PLED) with single layer/single polymers. The polymer system studied involves polyfluorene (PF) as the base conjugated polymer, carbazole (Cz) as the charge transport moiety and a source for green emission by forming an electroplex with the PF main chain, and cyclometalated iridium (Ir) complexes as the phosphorescent dopant. Energy transfer from the green Ir complex or an electroplex formed between the fluorene main chain and side-chain carbazole moieties, in addition to that from the PF main chain, to the red Ir complex can significantly enhance the device performance, and a red light-emitting device with the high efficiency 2.8 cd/A at 7 V and 65 cd/m2, comparable to that of the same Ir complex-based OLED, and a broad-band light-emitting device containing blue, green, and red peaks (2.16 cd/A at 9 V) are obtained.

Journal Article↗
PubMed2003

DNA hybridization detection with water-soluble conjugated polymers and chromophore-labeled single-stranded DNA.

A sensor is provided that detects single-stranded deoxyribonucleic acid (ssDNA) with a specific base sequence. The ssDNA sequence sensor comprises an aqueous solution containing a cationic water-soluble conjugated polymer [in this case, poly(9,9-bis(6'-N,N,N-trimethylammonium)-hexyl)-fluorene phenylene), 1] with a ssDNA labeled with a dye (in this case, fluorescein). The emission of light from the sensor solution with the wavelength characteristic of the probe oligonucleotide indicates the presence of ssDNA with a specific base sequence complementary to that of the probe ssDNA-fluorescein. Maximum energy transfer from 1 to the signaling chromophore occurs when the ratio of polymer chains to DNA strands is approximately 1:1. Energy transfer from 1 results in a fluorescein emission that is more intense than that observed by direct excitation of the chromophore. Furthermore, the decrease in energy transfer upon addition of electrolyte indicates that electrostatic forces dominate the interactions between 1 and DNA.

Bacillus anthracis↗
PubMed2002

Effects of phosphine ligand chelation on the reactivity of monomeric parent amido ruthenium complexes: synthesis and reactivity of such a complex bearing monodentate ligands.

The parent amido complex cis-(PMe(3))(4)Ru(H)(NH(2)) (2) has been prepared via the deprotonation of [cis-(PMe(3))(4)Ru(H)(NH(3))(+)][BPh(4)(-)]. The amido complex is a somewhat weaker base than the DMPE analogue trans-(DMPE)(2)Ru(H)(NH(2)) but is still basic enough to quantitatively deprotonate fluorene and reversibly deprotonate 1,3-cyclohexadiene and toluene. Complex 2 exhibits very labile phosphine ligands, two of which can be replaced by DMPE to yield the mixed complex cis-(PMe(3))(2)(DMPE)Ru(H)(NH(2)). Because of the ligand lability, 2 also undergoes hydrogenolysis and rapid exchange with labeled NH(3). The amide complex reacts with alkyl halides to yield E2 and S(N)2 products, along with ruthenium hydrido halide complexes including the ruthenium fluoride cis-(PMe(3))(4)Ru(H)(F). Ruthenium hydrido ammonia halide ion pair intermediates [cis-(PMe(3))(4)Ru(H)(NH(3))(+)][X(-)] are observed in some deprotonation and E2 reactions, and measurement of the equilibrium constants for NH(3) displacement from these complexes suggests that they benefit from significant hydrogen bonding between X(-) and NH(3) groups. Cumulenes also react with complex 2 to afford the products of insertion into an NH bond. The rates of neither these NH insertion reactions nor the reversible deprotonation reactions show any dependence on the concentration of PMe(3) present, suggesting that these reactions take place directly at the NH(2) group and do not involve precoordination of substrate to the metal center.

Journal Article↗
PubMed2002

Deciphering the mechanistic dichotomy in the cyclization of 1-(2-ethynylphenyl)-3,3-dialkyltriazenes: competition between pericyclic and pseudocoarctate pathways.

The mechanistic aspects of the cyclization of (2-ethynylphenyl)triazenes under both thermal and copper-mediated conditions are reported. For cyclization to an isoindazole, a carbene mechanistic pathway is proposed. The carbene intermediate can react with oxygen, dimerize to give an alkene, or be trapped either intermolecularly (using 2,3-dimethyl-2-butene to generate a cyclopropane) or intramolecularly (using a biphenyl moiety at the terminus of the acetylene to form a fluorene). Density-functional theory (DFT) calculations support a pseudocoarctate pathway for this type of cyclization. Thermal cyclization to give a cinnoline from (2-ethynylphenyl)triazenes is proposed to occur through a pericyclic pathway. DFT calculations predict a zwitterionic dehydrocinnolinium intermediate that is supported by deuterium trapping studies as well as cyclizations performed using a 2,2,6,6-tetramethylpiperidine moiety at the 3-position of the triazene.

Journal Article↗
PubMed2003

Mechanically linked polycarbonate.

The synthesis, by solid-state copolymerization, and characterization of the first polycatenanes based on a commercial polymer are reported. Various amounts of a benzylic amide [2]catenane, the corresponding macrocycle, and a rigid bisphenol fluorene derivative have been quantitatively and homogeneously incorporated into bisphenol A polycarbonate. The resulting copolymers were characterized by size exclusion chromatography coupled with viscosimetry, (1)H NMR, differential scanning calorimetry, and dynamic mechanical analysis. The unexpectedly small influence of [2]catenane incorporation on the glass transition temperature of the copolymers points to remarkable internal mobility of the catenane comonomer rings. A new relaxation linked to the flexible catenane units is also observed. The studies represent a detailed structural characterization of a polymer containing small amounts of mechanical linkages in its backbone and demonstrate that significant effects can be induced by doping conventional polymers with small percentages (2-6% of repeat units) of flexible catenanes.

Journal Article↗
PubMed2003

Phosphorescence quenching by conjugated polymers.

Energy transfer between phosphors and conjugated polymers was investigated using a fluorene trimer (F3) as a model conjugated material. The phosphors studied were bis-cyclometalated iridium complexes (FP, PPY, BT, PQ, and BTP), with triplet energies of 2.6, 2.4, 2.2, 2.1, and 2.0 eV, respectively (based on phosphorescence spectra). Stern-Volmer analysis of luminescent quenching shows that energy transfer from either FP or PPY to F3 is an exothermic process with Stern-Volmer quenching constants (kqSV) of near 109 M-1 s-1 while energy transfer from BT, PQ, and BTP is endothermic (kqSV = 107-106 M-1 s-1). On the the basis of above results, the triplet energy of F3 is estimated to be less than 2.3 eV (530 nm). This study suggests that conjugated polymers, which typically have lower T1 energies than F3, should also quench phosphorescent emission in thin films and organic light-emitting diodes (OLEDs) incorporating these and related phosphorescent dopants.

Journal Article↗
PubMed2004

Fluorescein provides a resonance gate for FRET from conjugated polymers to DNA intercalated dyes.

Fluorescence spectra show that excitation of the cationic water-soluble conjugated polymer poly[(1,4-phenylene)-2,7-[9,9-bis(6'-N,N,N-trimethylammonium)-hexyl]fluorene diiodide] (1) results in inefficient fluorescence resonance energy transfer (FRET) to ethidium bromide (EB) intercalated within double-stranded DNA (dsDNA). When fluorescein (Fl) is attached to one terminus of the dsDNA, there is efficient FRET from 1 through Fl to EB. The cascading energy-transfer process was examined mechanistically via fluorescence decay kinetics and fluorescence anisotropy measurements. These experiments show that the proximity and conformational freedom of Fl provide a FRET gate to dyes intercalated within DNA which are optically amplified by the properties of the conjugated polymer. The overall process provides a substantial improvement over previous homogeneous conjugated polymer based DNA sensors, namely, in the form of improved selectivity.

Base Sequence↗
PubMed2003

Shape-adaptable water-soluble conjugated polymers.

Cationic water-soluble conjugated polymers with a non "rigid-rod" aspect ratio can be prepared by Suzuki coupling condensation polymerization of 2,7-dibromo-9,9-bis(6'-bromohexyl)fluorene and varying ratios of p- and m-phenyl diboronic acids, followed by reaction with trimethylamine. The resulting polymers are designated MnPm+, where the subscripts in Mn and Pm correspond to the ratio of meta and para linkages, respectively. Absorption and fluorescence spectra indicate facile energy transfer via interachain or intrachain mechanisms. The emission of MnPm+ with m > 50 matches that of M0P100+. Excitations ultimately reside in the polymer segments with largest number of para linkages. FRET experiments show that the polymers with a more flexible structure are better donors to fluorescein-labeled double-stranded DNA. Similar results are obtained when intercalated ethidium bromide is used as the acceptor. These results indicate that there is better spatial registry between the flexible conjugated polymers and the secondary structure of DNA.

Cations↗
PubMed2003

Extended pi-conjugated dendrimers based on truxene.

The largest pi-conjugated dendrimers containing up to nine 10,15-dihydro-5H-diindeno[1,2-alpha;1',2';-c]fluorene (truxene) moieties have been prepared with good yields by repetitive Friedel-Crafts acetylation and acid-promoted cyclotrimerization reactions. An alternative approach to the convergent synthesis of desired dendrimers has been developed, in which the core is generated "in-situ" by acid-promoted cyclotrimerizations of aryl methyl ketones. This proves valuable to afford large-size and precisely well-defined dendrimers in an accelerated dendrimer-growth strategy utilizing enlarged repeat units. The increasing amount of SiCl4 dramatically improves the yield of cyclotrimerization reactions. The introduction of hexahexyl groups onto C-5, C-10, C-15 positions of the truxene moiety greatly enhances the solubility of our compounds. Further investigation indicates that the torsion angle between the truxene segment and the benzene ring might play a key role in determining the photo properties of pi-conjugated dendrimers.

Journal Article↗
PubMed2004

Synthesis and properties of monodisperse oligofluorene-functionalized truxenes: highly fluorescent star-shaped architectures.

This paper describes the strategy toward novel monodisperse, well-defined, star-shaped oligofluorenes with a central truxene core and from monofluorene to quaterfluorene arms. Introduction of solubilizing n-hexyl groups at both fluorene and truxene moieties results in highly soluble, intrinsically two-dimensional nanosized macromolecules T1-T4. The radius for the largest oligomer of ca. 3.9 nm represents one of the largest known star-shaped conjugated systems. Cyclic voltammetry experiments reveal reversible or quasi-reversible oxidation and reduction processes (Eox = +0.74 to 0.80 V, Ered = -2.66 to 2.80 eV vs Fc/Fc+), demonstrating excellent electrochemical stability toward both p- and n-doping, while the band gaps of the oligomers are quite high (EgCV = 3.20-3.40 eV). Close band gaps of 3.05-3.29 eV have been estimated from the electron absorption spectra. These star-shaped macromolecules demonstrate good thermal stability (up to 400-420 degrees C) and improved glass transition temperatures with an increase in length of the oligofluorene arms (from Tg = 63 degrees C for T1 to 116 degrees C for T4) and show very efficient blue photoluminescence (lambdaPL = 398-422 nm) in both solution (PhiPL = 70-86%) and solid state (PhiPL = 43-60%). Spectroelectrochemical experiments reveal that compounds T1-T4 are stable electrochromic systems which change their color reversibly from colorless in the neutral state (approximately 340-400 nm) to colored (from red to purple color; approximately 500-600 nm) in the oxidized state.

Journal Article↗
PubMed2004

Porphyrins with four monodisperse oligofluorene arms as efficient red light-emitting materials.

A family of red light-emitting star-shaped porphyrins with four monodisperse conjugated oligofluorene arms was prepared by using two key reactions: Lindsey condensation and Suzuki-Miyaura cross coupling reactions. All porphyrins exhibit high quantum yields (about 0.22) and good solubility in common organic solvents, and form high-quality solid films. Optical studies showed that the star-shaped oligomers could absorb blue light and emit saturated red light via efficient energy transfer from the fluorene segments to the porphyrin core.

Journal Article↗
PubMed2004

Ladder-type pentaphenylenes and their polymers: efficient blue-light emitters and electron-accepting materials via a common intermediate.

A new route to ladder-type pentaphenylenes has been developed in which both good hole-accepting p-type and electron-accepting n-type materials can be prepared from a common intermediate. This key intermediate is a pentaphenylene diester 5 obtained in high yield by Suzuki coupling of 2 equiv of fluorene boronates with 2,5-dibromoterephthalate. Addition of aryllithium followed by ring closure with boron trifluoride produced a blue-emitting ladder-type pentaphenylene. Bromination followed by reductive polymerization with nickel(0) gave new high molecular mass polymers, which show efficient blue emission with a very small Stokes shift. These polymers bridge the gap in emission between polyfluorenes and fully ladder-type polyphenylenes. An alternative ring closure of the dibromopentaphenylene diester 14 with acid made a diketone that is a good electron-accepting material, as it displays a reversible two-electron reduction. The reduction onset potential of -0.875 V against Ag/Ag(+) corresponds to a lowest unoccupied molecular orbital (LUMO) energy level of 3.53 eV, comparable to the work function of magnesium, suggesting that this unit could be used to greatly increase the injection of electrons into polymers containing it in a light-emitting diode (LED) or solar cell. A red-emitting material was prepared by Suzuki coupling of the dibromopentaphenylene 10b with a perylene dye, thus offering the prospect of tuning the emission from pentaphenylene materials over the whole visible range by attachment of suitable dyes. Unoptimized single-layer organic LEDs that used 11b showed stable pure-blue emission with brightnesses of over 200 cd/m(2) at 7 V, with moderate efficiencies.

Journal Article↗
PubMed2004

High-efficiency, environment-friendly electroluminescent polymers with stable high work function metal as a cathode: green- and yellow-emitting conjugated polyfluorene polyelectrolytes and their neutral precursors.

A series of aminoalkyl-substituted polyfluorene copolymers with benzothiadiazole (BTDZ) of different content were synthesized by Suzuki coupling reaction, and their quaternized ammonium polyelectrolyte derivatives were obtained through a postpolymerization treatment on the terminal amino groups. Copolymers are soluble in environmentally friendlier solvents, such as alcohols. It was found that the efficient energy transfer occurs by exciton trapping on the narrow band gap BTDZ site under UV illumination. Only 1% of BTDZ content is needed to completely quench a fluorene emission for both the neutral and the quaternized copolymers in the neat film. Absolute PL efficiencies of copolymer films were greatly enhanced as a result of the suppression of excimer formation. Light-emitting devices fabricated from these copolymers show high external quantum efficiencies over 3% and 1% for the neutral precursor and the quaternized copolymers, respectively, with high work function metals such as Al as a cathode. To the best of our knowledge, this is the first report on an electroluminescent polymer which bears the high EL efficiency, the electron-injection ability from high work function metals, and the solubility in environment-friendly solvents at the same time. These features make them a promising candidate for the next generation of light-emitting copolymers in PLED flat panel display application.

Journal Article↗
PubMed2004

Carbazole compounds as host materials for triplet emitters in organic light-emitting diodes: polymer hosts for high-efficiency light-emitting diodes.

A carbazole homopolymer and carbazole copolymers based on 9,9'-dialkyl-[3,3']-bicarbazolyl, 2,5-diphenyl-[1,3,4]-oxadiazole and 9,9-bis(4-[3,7-dimethyloctyloxy]phenyl)fluorene were synthesized and their electrical and photophysical properties were characterized with respect to their application as host in phosphorescent polymer light-emitting diodes. It is shown that the triplet energy of a polymer depends on the specific connections between its building blocks. Without changing the composition of the polymer, its triplet energy can be increased from 2.3 to 2.6 eV by changing the way in which the different building blocks are coupled together. For poly(9-vinylcarbazole) (PVK), a carbazole polymer often used as host for high-energy triplet emitters in polymer light-emitting diodes, a large hole-injection barrier of about 1 eV exists due to the low-lying HOMO level of PVK. For all carbazole polymers presented here, the HOMO levels are much closer to the Fermi level of a commonly used anode such as ITO and/or a commonly used hole-injection layer such as PEDOT:PSS. This makes high current densities and consequently high luminance levels possible at moderate applied voltages in polymer light-emitting diodes. A double-layer polymer light-emitting diode is constructed comprising a PEDOT:PSS layer as hole-injection layer and a carbazole-oxadiazole copolymer doped with a green triplet emitter as emissive layer that shows an efficacy of 23 cd/A independent of current density and light output.

Journal Article↗
PubMed2004

Carbazole compounds as host materials for triplet emitters in organic light-emitting diodes: tuning the HOMO level without influencing the triplet energy in small molecules.

A series of novel carbazole compounds was synthesized and tested for their suitability as host for triplet emitters in an organic-light emitting diode (OLED). In these compounds, a carbazole unit is either connected to other carbazole units to form carbazole dimers and trimers or to fluorene and oxadiazole derivatives to form mixed compounds. The HOMO level of carbazole compounds can be tuned by substitution at the 3, 6, and/or 9 positions. Making oligomers by connecting carbazole molecules via their 3 (3') positions shifts the HOMO level to higher energy, while replacing alkyl groups at the 9 (9') positions by aryl groups shifts the HOMO level to lower energy. Furthermore, it has been found that the triplet energy of these compounds is determined by the presence of poly(p-phenyl) chains in the molecular structure. By identifying the longest poly(p-phenyl) chain, one can predict whether a compound will be a suitable host for a high-energy triplet emitter. An overview of HOMO levels, singlet and triplet levels, and exchange energies is given for all carbazole compounds synthesized. Finally, OLEDs employing two selected carbazole compounds as host and fac-tris(2-phenylpyridine)-iridium (Ir(ppy)(3)) as guest were constructed and characterized electrically.

Journal Article↗
PubMed2006

Allenylidene-to-indenylidene rearrangement in arene-ruthenium complexes: a key step to highly active catalysts for olefin metathesis reactions.

The allenylidene-ruthenium complexes [(eta6-arene)RuCl(=C=C=CR2)(PR'3)]OTf (R2 = Ph; fluorene, Ph, Me; PR'3 = PCy3, P(i)Pr3, PPh3) (OTf = CF3SO3) on protonation with HOTf at -40 C are completely transformed into alkenylcarbyne complexes [(eta6-p-cymene)RuCl([triple bond]CCH=CR2)(PR3)](OTf)2. At -20 degrees C the latter undergo intramolecular rearrangement of the allenylidene ligand, with release of HOTf, into the indenylidene group in derivatives [(eta6-arene)RuCl(indenylidene)(PR3)]OTf. The in situ-prepared indenylidene-ruthenium complexes are efficient catalyst precursors for ring-opening metathesis polymerization of cyclooctene and cyclopentene, reaching turnover frequencies of nearly 300 s(-1) at room temperature. Isolation of these derivatives improves catalytic activity for the ring-closing metathesis of a variety of dienes and enynes. A mechanism based on the initial release of arene ligand and the in situ generation of the active catalytic species RuCl(OTf)(=CH2)(PR3) is proposed.

Journal Article↗
PubMed2006

Control of interchain contacts, solid-state fluorescence quantum yield, and charge transport of cationic conjugated polyelectrolytes by choice of anion.

Simple procedures are provided for exchanging charge-compensating ions in conjugated polyelectrolytes by progressive dilution of the original species and for determining the degree of ion exchange by using X-ray photoelectron spectroscopy. By using these methods, the bromide ions in poly[(9,9-bis(6'-N,N,N-trimethylammoniumbromide)hexyl)fluorene-co-alt-4,7-(2,1,3-benzothiadiazole)]were exchanged with BF4-, CF3SO3-, PF6-, BPh4-, and B(3,5-(CF3)2C6H3)4- (BArF4-). Absorption, photoluminescence (PL), and PL quantum yields (Phi) were measured in different solvents and in solid films cast from methanol. Examination of the resulting trends, together with the spectral bandshapes in different solvents, suggests that increasing the counteranion (CA) size decreases interchain contacts and aggregation and leads to a substantial increase of Phi in the bulk. Size analysis of polymers containing Br- and BArF4- in water by dynamic light scattering techniques indicates suppression of aggregation by BArF4-. Nanoscale current-voltage measurements of films using conducting atomic force microscopy show that hole mobilities and, more significantly, charge injection barriers are CA dependent. These results show that it is possible to significantly modify the optoelectronic properties of conjugated polyelectrolytes by choosing different counterions. A parent conjugated backbone can thus be fine-tuned for specific applications.

Anions↗