Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “ADSORPTION”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 865 records · Page 48Linked to original sources
PubMed1996

Adsorption of betamethasone disodium phosphate on ethylcellulose latex: an electrokinetic study.

The use of polymer latexes as vehicles for drug transport and controlled delivery in the body is a very active research field in applied colloid science. In this work, the polymer chosen is a commercially available ethylcellulose-based material, Aquacoat. We report electrokinetic (electrophoresis) data on this polymer in the presence of the soluble glucocorticoid betamethasone disodium phosphate (BMP). The electrophoretic mobility of the particles becomes more negative as the concentration of BMP in the medium is increased between 10(-5) and 10(-3) M, this demonstrating that the negative species produced upon dissolution of BMP adsorb on the particles; this trend is reversed for higher concentrations due to the phenomenon of double layer thickness. When pH is increased at constant BMP concentration, the negative mobility increases in absolute value, but it reaches lower values than attained in the absence of BMP. This is interpreted as another consequence of adsorption, since the ionization constants of the phosphate and sulfate groups are different. Such adsorption is confirmed and measured by spectrophotometric analysis of the supernatants after centrifugation of the suspensions; it is found that the adsorption density increases with the initial concentration of BMP in the medium, an almost vertical isotherm being obtained for concentrations above 5 x 10(-3) M, possibly due to bidimensional aggregation of the adsorbed molecules and multilayer adsorption at higher concentrations. It is found that the adsorbed amount increases with the ionic strength of the medium as a consequence of screening of the particle and BMP charges, whereas these electrostatic contributions to adsorption manifest also in the pH dependence of adsorption. IR analysis of the particles after equilibration with BMP solutions of increasing concentration agrees well with adsorption data.

Adsorption↗
PubMed2005

Adsorption of xanthene dyes by lysozyme crystals.

Adsorption characteristics of cross-linked lysozyme crystals of different morphologies (tetragonal, orthorhombic, triclinic and monoclinic) were examined using four anionic dyes (fluorescein, eosin, erythrosin, and rose bengal), one zwitterionic dye (rhodamine B), and one cationic dye (rhodamine 6G). The adsorption isotherms were of the Langmuir type for all examined systems with the exception of rhodamine B adsorption by monoclinic crystals. The weakest adsorption was observed for the cationic dye, rhodamine B, whereas dianionic dyes, eosin, rose bengal, and erythrosin were strongly adsorbed on the protein surface. The adsorption capacities of the crystals for the dyes were found to depend on both charge and hydrophobicity of the dye, reflecting the heterogeneous character of the lysozyme pore surface. The adsorption affinity of the crystals for the dyes was a function of the dyes' hydrophobicity. Furthermore, the crystal morphology was identified as an additional factor determining capacity and affinity for dye adsorption. Differences between crystals prepared in the presence of the same precipitant were lower than between morphologies prepared with different precipitants.

Adsorption↗
PubMed2004

Nonlinear optical probe of biopolymer adsorption on colloidal particle surface: poly-L-lysine on polystyrene sulfate microspheres.

A nonlinear optical technique--second harmonic generation (SHG)--has been applied to characterize the adsorption of poly-L-lysine on micrometer size polystyrene particles, whose surface is covered with negatively charged sulfonate groups, in aqueous solutions. Adsorption behavior of the biopolymer with two chain lengths (14 and 75 amino acid units; PL14 and PL75) has been examined. Centrifugation experiments were also performed to support the adsorption measurements made using SHG. The adsorption free energies of the two polymers PL75 and PL14 are determined as -16.57 and -14.40 kcal/mol, respectively. The small difference in the adsorption free energies of the two chain lengths, however, leads to dramatic difference in the concentration needed for saturated surface coverage: nearly 50 times higher concentration is needed for the smaller polymer. Under acidic colloidal conditions, polylysine is found to adsorb in a relatively flat conformation on the surface. The surface area that each polylysine molecule occupies is nearly 1 order of magnitude larger than the size of the molecule in its extended form. The low adsorption density is likely a result from Coulombic repulsion between the positive charges on the amino acid units of PL. The measurements demonstrate the utility of SHG as an efficient and sensitive experimental approach for measuring adsorption characteristics of bio/macromolecules on colloidal particles and define surface and colloidal conditions for achieving maximum surface coverage of a widely used biopolymer.

Adsorption↗
PubMed2004

Adsorption of poly(vinyl alcohol) from water to a hydrophobic surface: effects of molecular weight, degree of hydrolysis, salt, and temperature.

The adsorption of poly(vinyl alcohol) (PVOH) from aqueous solutions to a silicon-supported fluoroalkyl monolayer is described. Thickness, wettability, and roughness of adsorbed films are studied as a function of polymer molecular weight, degree of hydrolysis (from the precursor, poly(vinyl acetate)), polymer concentration, salt type and concentration, and temperature. The data suggest a two-stage process for adsorption of the polymer: physisorption due to a hydrophobic effect (decrease in interfacial free energy) and subsequent stabilization of the adsorbed layer due to crystallization of the polymer. Adsorption of lower-molecular-weight polymers results in thicker films than those prepared with a higher molecular weight; this is ascribed to better crystallization of more mobile short chains. Higher contents of unhydrolyzed acetate groups on the poly(vinyl alcohol) chain lead to thicker adsorbed films. Residual acetate groups partition to the outermost surface of the films and determine wettability. Salts, including sodium chloride and sodium sulfate, promote adsorption, which results in thicker films; at the same time, their presence over a wide concentration range leads to formation of rough coatings. Sodium thiocyanate has little effect on PVOH adsorption, only slightly reducing the thickness in a 2 M salt solution. Increased temperature promotes adsorption in the presence of salt, but has little effect on salt-free solutions. Evidently, higher temperatures favor adsorption but cause crystallization to be less thermodynamically favorable. These competing effects result in the smoothest coatings being formed in an intermediate temperature range.

Adsorption↗
PubMed2004

Cadmium ion adsorption on different carbon adsorbents from aqueous solutions. Effect of surface chemistry, pore texture, ionic strength, and dissolved natural organic matter.

Adsorption of Cd(II) species at pH = 5 was studied on three carbon adsorbents: granular activated carbon, activated carbon fiber, and activated carbon cloth. As-received and oxidized adsorbents were used. Cd(II) adsorption greatly increased after oxidation due to the introduction of carboxyl groups. The use of a buffer solution to control the pH introduced some changes in the surface chemistry of carbons through the adsorption of one of the compounds used, biphthalate anions. The increase in ionic strength reduced Cd(II) uptake on both as-received and oxidized carbons due to a screening of the electrostatic attractions between the Cd(II) positive species and the negative surface charge, which in the case of as-received carbons derived from the biphthalate anions adsorbed and in the oxidized ones from the carboxyl groups. Tannic acid was used as a model compound for natural organic matter. Its adsorption was greatly reduced after oxidation, and most of the carbon adsorbents preadsorbed with tannic acid showed an increase in Cd(II) uptake. In the case of competitive adsorption between Cd(II) species and tannic acid molecules, there was a decrease in Cd(II) uptake on the as-received carbon whereas the contrary occurred with the oxidized carbons. These results illustrate the great importance of carbon surface chemistry in this competitive adsorption process. Finally, under all experimental conditions used, when the adsorption capacity of carbons was compared under the same conditions it increased in the following order: granular activated carbon < activated carbon fiber < activated carbon cloth.

Adsorption↗
PubMed2005

Adsorption of nonionic surfactants on cellulose surfaces: adsorbed amounts and kinetics.

Kinetic and equilibrium aspects of three different poly(ethylene oxide) alkylethers (C12E5, C12E7, C14E7) near a flat cellulose surface are studied. The equilibrium adsorption isotherms look very similar for these surfactants, each showing three different regions with increasing surfactant concentration. At low surfactant content both the headgroup and the tail contribute to the adsorption. At higher surface concentrations, lateral attraction becomes prominent and leads to the formation of aggregates on the surface. The general shape of the isotherms and the magnitude of the adsorption resemble mostly those for hydrophilic surfaces, but both the ethylene oxide and the aliphatic segments determine affinity for the surface. The adsorption and desorption kinetics are strongly dependent on surfactant composition. At bulk concentrations below the CMC, the initial adsorption rate is attachment-controlled. Above the CMC, the micellar diffusion coefficient and the micellar dissociation rate play a crucial role. For the most hydrophilic surfactant, C12E7, both parameters are relatively large. In this case, the initial adsorption rate increases with increasing surfactant concentration, also above the CMC. For C12E5 and C14E7 there is no micellar contribution to the initial adsorption rate. The initial desorption kinetics are governed by monomer detachment from the surface aggregates. The desorption rate constants scale with the CMC, indicating an analogy between the surface aggregates and those formed in solution.

Adsorption↗
PubMed2005

In deuterated water the unspecific adsorption of proteins is significantly slowed down: results of an SPR study using model organic surfaces.

The control of unspecific adsorption of proteins to natural and technical surfaces plays an important role in biology and also for many applications. Organic model surfaces, e.g., self-assembled monolayers, are often used to identify fundamental surface and/or protein properties that rule protein adsorption. Some techniques involved in biointerface research require the use of heavy water, e.g. neutron scattering techniques. Also in NMR studies D(2)O is the solvent of choice when focusing on biomolecular and hydration dynamics. So far several studies have been concerned with the characterization of the unspecific adsorption of proteins from normal water buffers. In the present work, we report a comparison of the unspecific protein adsorption from normal and heavy water buffers. So far it has been assumed that the surface kinetic of the unspecific adsorption is unaffected by the substitution of water by D(2)O. However, for the four proteins investigated here, this assumption does not hold. The ratio k(H)/k(D) of the adsorption rate constants of the different buffer conditions describe the strength of the isotope effect. We have measured ratios between 1.0 and 2.6, indicating that the adsorption kinetics are strongly affected by a H(2)O-D(2)O substitution.

Adsorption↗
PubMed2006

The kinetics and saturation of reversible adsorption on patterned (heterogeneous) surfaces.

We analytically examine the time-dependent adsorption of analyte (solute) on a finite-sized adsorption region as a model for sensors utilizing patterned or heterogeneous surfaces. We account for both reversible adsorption (assuming first-order reaction) and saturation of the adsorption patch that may arise either from packing constraints (finite area) or because of a finite number of binding sites (ligands). Our main conclusions include the following: (1) Saturation effects, due to either finite patch size or finite number of binding sites, become significant at extremely short times. (2) Increasing the strength of binding between the analyte and the adsorption sites increases the adsorbed amount at short times, but, at long times, the mass adsorbed on a weakly binding patch is higher than that on a strongly binding one. (3) The sensitivity of detection, as defined by the adsorption of the minimal analyte mass required for signaling, over a fixed period of time, does not scale as 1/detection time. As a result, increasing the time over which adsorption occurs increases sensitivity, but not linearly. Sensitivity of detection also increases with increasing patch area and initial binding strength.

Adsorption↗
PubMed2006

Molecular simulation study of adsorption and diffusion on silicalite for a benzene/CO2 mixture.

The adsorption and diffusion of a binary mixture of supercritical CO2 and benzene on silicalite (MFI-type) have been studied through the grand canonical Monte Carlo and molecular dynamics (MD) simulations. The adsorption behavior of pure CO2 on silicalite was discussed in detail from the adsorption isotherms, adsorption sites, interaction energies, and isosteric heats of adsorption. For the mixture, the influences of temperature, pressure and composition on the adsorption isotherms have been examined. The adsorption site behavior of the mixture has been analyzed, and benzene molecules get adsorbed preferentially in the more spacious channel intersection positions. These simulation results suggest that SC-CO2 fluid can be used as an efficient desorbent of larger aromatics in the zeolite material. The diffusion characteristic for the benzene/CO2 mixture was studied on the basis of MD simulation. It was found that the large coadsorbed benzene molecule has a pronounced effect on the CO2 diffusion in the mixture, while the mobility of benzene molecules is very small due to geometrical restrictions.

Adsorption↗
PubMed2006

Control of specific attachment of proteins by adsorption of polymer layers.

This study concerns the design of protein-resistant polymer adsorbed layers for the control of surface binding of biospecific recognition entities. Polymer surface layers were prepared using the adsorption of poly(allylamine hydrochloride) (PAH), poly(l-lysine) (PL), and branched and linear polyethyleneimine (PEI) and further modified by the covalent attachment of biotin for specific avidin attachment. The adsorption of PAH, PL, and PEI on silicon substrates was studied as a function of pH and ionic strength using ellipsometry. Average dry layer thicknesses of approximately 10, approximately 5, approximately 9, and approximately 3 A (+/-1 A) were obtained when polymer adsorption occurred from solutions at pH 9.5 that contained 0.5 M NaCl for PAH, PL, branched PEI, and linear PEI, respectively. These polymers showed significant differences in their efficiency to suppress nonspecific avidin adsorption. At low ionic strength, avidin adsorption occurred on all polymer-coated surfaces at basic pH values, despite the same positive electrostatic charge for protein globules and the surface. Though the net electrostatic repulsion between avidin molecules and branched PEI was efficiently screened in a protein solution of pH 7 and 0.15 M NaCl, branched-PEI coatings of high molecular weight were unique in their ability to provide avidin-resistant surfaces as a result of steric hindrance from the branched architecture of adsorbed polymer chains. All polymers studied were effective in suppressing avidin adsorption at pH 3 as a result of protonation of the avidin surface functional groups at this pH. Branched-PEI-coated surfaces were also effective for the suppression of smaller positively charged proteins such as lysozyme and ribonuclease A at pH 7 and 0.15 M NaCl. They were also resistant to the adsorption of negatively charged proteins such as BSA and fibrinogen at pH 7 and 0.75 M NaCl. Furthermore, by using PEI-modified protein-repellent surfaces, selective binding of avidin was achieved to surface-bound silver nanoparticles, which should provide a promising application for the label-free detection of biological species using surface-enhanced Raman scattering (SERS).

Adsorption↗
PubMed2002

Loading of tetanus toxoid to biodegradable nanoparticles from branched poly(sulfobutyl-polyvinyl alcohol)-g-(lactide-co-glycolide) nanoparticles by protein adsorption: a mechanistic study.

PURPOSE: Mucosal delivery of vaccine-loaded nanoparticles (NP) is an attractive proposition from an immunologic perspective. Although numerous NP preparation methods are known, sufficient antigen loading of NP remains a challenge. The aim of this study was to evaluate adsorptive loading of NP with a negatively charged surface structure using tetanus toxoid (TT) as a model vaccine. METHODS: Blank NP, consisting of poly(sulfobutyl-polyvinyl alcohol)-g-(lactide-co-glycolide), as well as poly(lactide-co-glycolide) NP were prepared by a solvent displacement technique. The use of polymers with different degrees of substitution resulted in NP with different negative surfaces charges. Adsorption of TT to NP was performed varying to NP surface properties, protein equilibrium concentration, and loading conditions. RESULTS: The protein adsorption was controlled by NP surface properties, and maximum TT adsorption occurred at highly negatively charged NP surfaces. Results from isothermal titration calorimetry and zeta-potential measurement suggest an adsorption process governed by electrostatic interactions. The adsorption followed the Langmuir isotherm in the concentration ranges studied. TT withstood this gentle loading procedure in a nonaggregated, enzyme-linked immunoabsorbant assay-active form. CONCLUSION: The results demonstrate that negatively charged NP consisting of poly(sulfobutyl-polyvinyl alcohol)-g-(lactide-co-glycolide) are suitable for adsorptive loading with TT and may have potential for mucosal vaccination.

Adsorption↗
PubMed1997

Adsorptive stripping voltammetry of bleomycin.

In 0.05 M H2SO4 solution, two reductive peaks, P1 and P2, of bleomycin were obtained. The peak potentials E(P1) and E(P2) were -0.83 and -1.09 V (versus Ag/AgCl), respectively. The sensitivity of P2 was much higher than that of P1. The peak current of P2 was proportional to the concentration of bleomycin over the range 1.0 x 10(-9)-1.0 x 10(-7) M with a detection limit of 5.0 x 10(-10) M using adsorptive voltammetry at an accumulation time of 120 s (Ei = -0.80 V). The behaviour of the reduction wave was studied and applied to the determination of bleomycin in mouse serum. The reduction process of P1 was irreversible with adsorptive characteristics and the adsorption behavior obeyed the Frumkin adsorptive isotherm. The adsorptive coefficient beta was 8.9 x 10(5), the interaction factor alpha was 0.94 and the Gibbs energy of adsorption delta G degree was -33.93 kJ mol-1. P2 was an irreversible adsorption peak with catalytic hydrogen properties.

Adsorption↗
PubMed2002

Preferential adsorption of fluorescing fulvic and humic acid components on activated carbon using flow field-flow fractionation analysis.

Activated carbon treatment of drinking water is used to remove natural organic matter (NOM) precursors that lead to the formation of disinfection byproducts. The innate hydrophobic nature and macromolecular size of NOM render it amenable to sorption by activated carbon. Batch equilibrium and minicolumn breakthrough adsorption studies were performed using granular activated carbon to treat NOM-contaminated water. Ultraviolet (UV) absorption spectroscopy and flow field-flow fractionation analysis using tandem diode-array and fluorescence detectors were used to monitor the activated carbon sorption of NOM. Using these techniques, it was possible to study activated carbon adsorption properties of UV absorbing, fluorescing and nonfluorescing, polyelectrolytic macromolecules fractionated from the total macromolecular and nonmacromolecular composition of NOM. Adsorption isotherms were constructed at pH 6 and pH 9. Data were described by the traditional and modified Freundlich models. Activated carbon capacity and adsorbability were compared among fractionated molecular subsets of fulvic and humic acids. Preferential adsorption (or adsorptive fractionation) of polyelectrolytic, fluorescing fulvic and humic macromolecules on activated carbon was observed. The significance of observing preferential adsorption on activated carbon of fluorescing macromolecular components relative to nonfluorescing components is that this phenomenon changes the composition of dissolved organic matter remaining in equilibrium in the aqueous phase relative to the composition that existed in the aqueous phase prior to adsorption. Likewise, it changes the composition of dissolved organic matter remaining in equilibrium in the aqueous phase relative to the adsorbed phase. This research increases our understanding of NOM interactions with activated carbon which may lead to improved methods of potable water production.

Adsorption↗
PubMed2005

Molecular dynamics simulation of uranyl(VI) adsorption equilibria onto an external montmorillonite surface.

We used molecular dynamics simulations to study the adsorption of aqueous uranyl species (UO(2)(2+)) onto clay mineral surfaces in the presence of sodium counterions and carbonato ligands. The large system size (10,000 atoms) and long simulation times (10 ns) allowed us to investigate the thermodynamics of ion adsorption, and the atomistic detail provided clues for the observed adsorption behavior. The model system consisted of the basal surface of a low-charge Na-montmorillonite clay in contact with aqueous uranyl carbonate solutions with concentrations of 0.027 M, 0.081 M, and 0.162 M. Periodic boundary conditions were used in the simulations to better represent an aqueous solution interacting with an external clay surface. Uranyl adsorption tendency was found to decrease as the aqueous uranyl carbonate concentration was increased, while sodium adsorption remained constant. The observed behavior is explained by physical and chemical effects. As the ionic strength of the aqueous solution was increased, electrostatic factors prevented further uranyl adsorption once the surface charge had been neutralized. Additionally, the formation of aqueous uranyl carbonate complexes, including uranyl carbonato oligomers, contributed to the decreased uranyl adsorption tendency.

Adsorption↗
PubMed2006

Characterization of fibrinogen adsorption onto glass microcapillary surfaces by ELISA.

Adsorption of biomolecules onto microchannel surfaces remains a critical issue in microfluidic devices. This paper investigates the adsorption of fibrinogen on glass microcapillaries using an immunoassay method (ELISA) and X-ray photoelectron spectroscopy (XPS). Various adsorption conditions such as protein concentrations and incubation times, buffer pH, buffer ionic strengths and effects of flow are presented. ELISA is successfully demonstrated as a facile and robust technique to examine these phenomena. The highest adsorption level occurs near the isoelectric point of fibrinogen (pH 5.0) and low buffer ionic strengths (0-8 mM). Microchannel surface saturation was achieved at a fibrinogen solution concentration of approximately 50 microg ml(-1). Fibrinogen adsorption under flow was always higher than that seen in static systems. The importance of diffusion phenomena in microchannels on protein adsorption was demonstrated. ELISA experiments using fused silica and PEEK have also confirmed significant adsorption on these mass spectrometer transfer line materials.

Adsorption↗
PubMed1976

Adsorption of glyceraldehyde 3-phosphate dehydrogenase on condensed monolayers of phospholipid.

The adsorption of [14C] alkylated glyceraldehyde 3-phosphate dehydrogenase from rabbit muscle to condensed monolayers of phosphatidic acid was investigated under a variety of conditions. 2. The rate constant for association at 20 degrees C depended on ionic strength. At I/2=60mM the rate constant was 0.39min-1. At I/2=260mM it decreased to 0.27min-1. 3. The apparent association constant (Kass.) for adsorption at I/2=60mM was 1.06 X 10(6)M-1 and was strongly influenced by subphase changes in pH and ionic strength. Measurements of Kass. at 20 degrees and 5 degrees C gave a value for the apparent enthalpy change on adsorption of -33kJ-mol-1. Calculations of the apparent change in free energy and apparent entropy change for the adsorption process gave values of -34kJ-mol-1 and +2J-K-1-mol-1 respectively. 4. Decreasing the amount of phosphatidic acid in the monolayer by replacement with phosphatidylcholine caused the shape of the adsorption isotherm to change from apparent hyperbolic to sigmoid. Subphase changes in pH or ionic strength did not affect the shape of the adsorption isotherm. However, adsorption of enzyme on monolayers of 100% phosphatidic acid in the presence of 1mM-CaCl2 was sigmoid in nature. 5. It is concluded that glyceraldehyde 3-phosphate dehydrogenase binds to condensed charged monolayers by multiple electrostatic interactions. At low concentrations of phosphatidic acid in the monolayer or in the presence of Ca2+, this occurs in a two-step process and depends on lateral diffusion of phosphatidic acid for strong binding to take place.

Adsorption↗
PubMed1986

Cell-cell recognition of host surfaces by pathogens. The adsorption of maize (Zea mays) root mucilage by surfaces of pathogenic fungi.

The adsorption of radioactive mucilage by pathogenic fungi was shown to be dependent upon time, the composition of mucilage, the type of fungal surface (conidia, hyphae, hyphal apices), fungal species, pH and bivalent cations. All fungal adhesins were inactivated by either proteinase or polysaccharase treatments. Adsorption was not inhibited by the numberous mono-, di- and oligo-saccharides that were tested individually, but it was inhibited absolutely by several polysaccharides. This suggested that adsorption of mucilage by pathogens involved conformational and ionic interactions between plant and fungal polymers but not fungal lectins bound to sugar residues of mucilage. Several fractionation schemes showed that pathogens bound only the most acidic of the variety of polymers that comprise mucilage. There was not any absolute distinction between ability to bind radioactive mucilage and type of pathogen or non-pathogen. However, there were notable differences in characteristics of adsorption between two types of pathogen. Differences were revealed by comparison of the adsorption capacities of conidia and germinant conidia and chromatography of radioactive mucilage on germinant conidia. An ectotrophic root-infecting fungus (a highly specialized pathogen) bound a greater proportion of mucilage than did a vascular-wilt fungus (of catholic host and tissue range) with more than one class of site for adsorption. In contrast with the vascular-wilt fungus, sites for adsorption on the specialized pathogen were present solely on surfaces formed by germination.

Adsorption↗
PubMed2004

Characterization of three Lactobacillus delbrueckii subsp. bulgaricus phages and the physicochemical analysis of phage adsorption.

AIMS: Three indigenous Lactobacillus delbrueckii subsp. bulgaricus bacteriophages and their adsorption process were characterized. METHODS AND RESULTS: Phages belonged to Bradley's group B or the Siphoviridae family (morphotype B1). They showed low burst size and short latent periods. A remarkably high sensitivity to pH was also demonstrated. Indigenous phage genomes were linear and double-stranded DNA molecules of approx. 31-34 kbp, with distinctive restriction patterns. Only one phage genome appeared to contain cohesive ends. Calcium ions did not influence phage adsorption, but it was necessary to accelerate cell lysis and improve plaque formation. The adsorption kinetics were similar on viable and nonviable cells, and the adsorption rates were high between 0 and 50 degrees C. SDS and proteinase K treatments did not influence the phage adsorption but mutanolysin and TCA reduced it appreciably. No significant inhibitory effect on phage adsorption was observed for the saccharides tested. This study also revealed the irreversibility of phage adsorption to their hosts. CONCLUSIONS, SIGNIFICANCE AND IMPACT OF THE STUDY: The study increases the knowledge on phages of thermophilic lactic acid bacteria.

Adsorption↗