Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Tungsten Compounds”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47Linked to original sources

Linearity evaluation in absorbance detection: the use of light-emitting diodes for on-capillary detection in capillary electrophoresis.

A model which takes into account both stray light and polychromatic light was used to predict and evaluate linearity in on-capillary detection in capillary electrophoresis (CE). According to the model the stray light is the major factor which determines linearity under typical CE operating conditions. By calculating theoretical absorbance versus concentration plots, the influence of different levels of stray light and polychromatic light on linearity is demonstrated. Experimentally, six light-emitting diodes (LEDs) in the range from 563 to 654 nm were examined as light sources for on-capillary detection in CE. Fitting theoretical curves to measured linearity plots enabled determination of the values of both effective path length and stray light for a particular detection system. The detector linearity for the four LEDs was compared to mercury and tungsten lamps used with interference filters. For potassium permanganate as the test compound, the linear range for a 563 nm LED was two times greater than that for a mercury lamp operated at 546 nm. The relatively poor linearity of the mercury lamp detector is explained by its high level of stray light. The noise of the LED563-based detector was the same as for the mercury lamp, whereas the other LEDs of higher light intensity gave approximately half the noise of the mercury lamp. The lowest noise level of 3 x 10(-5) AU was obtained for the LED at 554 nm (determined at a detector time constant of 0.1 s).

Electrophoresis, Capillary↗

High-nuclearity sulfide-rich molybdenum[bond]iron[bond]sulfur clusters: reevaluation and extension.

High-nuclearity Mo[bond]Fe[bond]S clusters are of interest as potential synthetic precursors to the MoFe(7)S(9) cofactor cluster of nitrogenase. In this context, the synthesis and properties of previously reported but sparsely described trinuclear [(edt)(2)M(2)FeS(6)](3-) (M = Mo (2), W (3)) and hexanuclear [(edt)(2)Mo(2)Fe(4)S(9)](4-) (4, edt = ethane-1,2-dithiolate; Zhang, Z.; et al. Kexue Tongbao 1987, 32, 1405) have been reexamined and extended. More accurate structures of 2-4 that confirm earlier findings have been determined. Detailed preparations (not previously available) are given for 2 and 3, whose structures exhibit the C(2) arrangement [[(edt)M(S)(mu(2)-S)(2)](2)Fe(III)](3-) with square pyramidal Mo(V) and tetrahedral Fe(III). Oxidation states follow from (57)Fe Mössbauer parameters and an S = (3)/(2) ground state from the EPR spectrum. The assembly system 2/3FeCl(3)/3Li(2)S/nNaSEt in methanol/acetonitrile (n = 4) affords (R(4)N)(4)[4] (R = Et, Bu; 70-80%). The structure of 4 contains the [Mo(2)Fe(4)(mu(2)-S)(6)(mu(3)-S)(2)(mu(4)-S)](0) core, with the same bridging pattern as the [Fe(6)S(9)](2-) core of [Fe(6)S(9)(SR)(2)](4-) (1), in overall C(2v) symmetry. Cluster 4 supports a reversible three-member electron transfer series 4-/3-/2- with E(1/2) = -0.76 and -0.30 V in Me(2)SO. Oxidation of (Et(4)N)(4)[4] in DMF with 1 equiv of tropylium ion gives [(edt)(2)Mo(2)Fe(4)S(9)](3-) (5) isolated as (Et(4)N)(3)[5].2DMF (75%). Alternatively, the assembly system (n = 3) gives the oxidized cluster directly as (Bu(4)N)(3)[5] (53%). Treatment of 5 with 1 equiv of [Cp(2)Fe](1+) in DMF did not result in one-electron oxidation but instead produced heptanuclear [(edt)(2)Mo(2)Fe(5)S(11)](3-) (6), isolated as the Bu(4)N(+)salt (38%). Cluster 6 features the previously unknown core Mo(2)Fe(5)(mu(2)-S)(7)(mu(3)-S)(4) in molecular C(2) symmetry. In 4-6, the (edt)MoS(3) sites are distorted trigonal bipramidal and the FeS(4) sites are distorted tetrahedral with all sulfide ligands bridging. Mössbauer spectroscopic data for 2 and 4-6 are reported; (mean) iron oxidation states increase in the order 4 < 5 approximately 1 < 6 approximately 2. Redox and spectroscopic data attributed earlier to clusters 2 and 4 are largely in disagreement with those determined in this work. The only iron and molybdenum[bond]iron clusters with the same sulfide content as the iron[bond]molybdenum cofactor of nitrogenase are [Fe(6)S(9)(SR)(2)](4-) and [(edt)(2)Mo(2)Fe(4)S(9)](3-)(,4-).

Catalysis↗

Distribution, metabolism and toxicity of inhaled sulfur dioxide and endogenously generated sulfite in the respiratory tract of normal and sulfite oxidase-deficient rats.

We report on the distribution, metabolism, and toxicity of sulfite in the respiratory tract and other tissues of rats exposed to endogenously generated sulfite or to inhaled sulfur dioxide (SO2). Graded sulfite oxidase deficiency was induced in several groups of rats by manipulating their tungsten to molybdenum intake ratio. Endogenously generated sulfite and S-sulfonate compounds (a class of sulfite metabolite) accumulated in the respiratory tract tissues and in the plasma of these rats in inverse proportion to hepatic sulfite oxidase activity. In contrast to this systemic mode of exposure, sulfite exposure of normal, sulfite oxidase-competent rats via inhaled SO2 (10 and 30 ppm) was restricted to the airways. Minor pathological changes consisting of epithelial hyperplasia, mucoid degeneration, and desquamation of epithelium were observed only in the tracheas and bronchi of the rats inhaling SO2, even though the concentration of sulfite plus S-sulfonates in the tracheas and bronchi of these rats was considerably lower than that in the endogenously exposed rats. We attribute this histological damage to hydrogen ions stemming from inhaled SO2, not to the sulfite/bisulfite ions that are also a product of inhaled SO2. In addition to the lungs and trachea, all other tissues examined, except the testes, appeared to be refractory to high concentrations of endogenously generated sulfite. The testes of grossly sulfite oxidase-deficient rats were severely atrophied and devoid of spermatogenic cells.

Administration, Inhalation↗

Determination of Ni(CO)4, Fe(CO)5, Mo(CO)6, and W(CO)6 in sewage gas by using cryotrapping gas chromatography inductively coupled plasma mass spectrometry.

Evidence for the occurrence of Ni(CO)4 in addition to Mo(CO)6 and W(CO)6 in fermentation gases from a municipal sewage treatment plant is presented for the first time. The gases were sampled at the top of the sewage sludge digester using Tedlar bags, and were analysed using cryotrapping followed by gas chromatography coupled with inductively coupled mass spectrometry (GC-ICP-MS). The use of an ICP-MS as an element-specific detector gives sufficiently low detection limits for metals and was coupled to a packed column gas chromatograph. This method provides information about the speciation of volatile transition metals in contrast to previously used methods for the determination of Ni(CO)4 in gas samples. The element-specific detection of three different isotopes (m/z 58, 60, 62) and the correspondence of the samples' retention times with those of the standard provided convincing evidence that Ni(CO)4 is present in the fermentation gas. The concentrations found were in the sub-ppb level, which is at least one order of magnitude lower than the threshold level of 1 ppb (v/v). In addition, Mo(CO)6 and W(CO)6 were also measured in the sub-ppb range in contrast to the absence of Fe(CO)5. The stabilities of Ni(CO)4, Fe(CO)5, and Mo(CO)6 were tested in a carbon monoxide atmosphere. In the presence of distilled water, the following order of stability was found after 11 weeks: Fe(CO)5 < Ni(CO)4 < Mo(CO)6. In the presence of an aqueous solution containing nickel, molybdenum, tungsten and iron, however, only Fe(CO)5 was significantly decomposed (< 0.3% recovery); Ni(CO)4 and Mo(CO)6 were stable after 11 weeks. No W(CO)6 was formed. The low stability of Fe(CO)5 in the presence of water could be the reason why no volatile iron compound was found in sewage gas. This study showed that GC-ICP-MS can be employed to identify species-specific traces of metal carbonyls in process gases such as sewage gas.

Air Pollutants, Occupational↗

Side-chain selective and covalent labelling of proteins by organometallic complexes of heavy transition metals--possible application in radio-crystallography of proteins.

Organo-rhenium and organo-tungsten N-succinimidyl and N-sulfosuccinimidyl esters react at amino groups of proteins to form stable amide bonds between the protein and the heavy transition metal complexes. We show here that factors such as pH of the reaction medium and nature of the reagent (coordinating metal, surrounding ligands, type of ester) had a marked influence on the final number of coupled organometallic groups per protein molecule, defined as the coupling ratio. By operating with stoichiometric quantities of reagent with respect to the number of aqino groups, up to 30 organometallic groups were introduced into the model protein, bovine serum albumin (BSA). BSA conjugates were characterized by gel electrophoresis in non-denaturating conditions. Hen egg-white lysozyme organo-tungsten conjugates were prepared in the same manner and the peptides resulting from their tryptic hydrolysis were analyzed by reverse-phase HPLC. A tentative assignment of the preferential amino sites of conjugation is suggested from the latter results.

Amino Acid Sequence↗

Reduction of inorganic compounds with molecular hydrogen by Micrococcus lactilyticus. I. Stoichiometry with compounds of arsenic, selenium, tellurium, transition and other elements.

Woolfolk, C. A. (University of Washington, Seattle) and H. R. Whiteley. Reduction of inorganic compounds with molecular hydrogen by Micrococcus lactilyticus. I. Stoichiometry with compounds of arsenic, selenium, tellurium, transition and other elements. J. Bacteriol. 84:647-658. 1962.-Extracts of Micrococcus lactilyticus (Veillonella alcalescens) oxidize molecular hydrogen at the expense of certain compounds of arsenic, bismuth, selenium, tellurium, lead, thallium, vanadium, manganese, iron, copper, molybdenum, tungsten, osmium, ruthenium, gold, silver, and uranium, as well as molecular oxygen. Chemical and manometric data indicate that the following reductions are essentially quantitative: arsenate to arsenite, pentavalent and trivalent bismuth to the free element, selenite via elemental selenium to selenide, tellurate and tellurite to tellurium, lead dioxide and manganese dioxide to the divalent state, ferric to ferrous iron, osmium tetroxide to osmate ion, osmium dioxide and trivalent osmium to the metal, uranyl uranium to the tetravalent state, vanadate to the level of vanadyl, and polymolybdate ions to molybdenum blues with an average valence for molybdenum of +5. The results of a study of certain other hydrogenase-containing bacteria with respect to their ability to carry out some of the same reactions are also presented.

Arsenic↗

Group 6 heteroatom- and non-heteroatom-stabilized carbene complexes. beta,beta'- and alpha,beta,beta'-annulation reactions of cyclic enamines.

Cyclization reactions of group 6 Fischer carbene complexes with cyclopentanone and cyclohexanone enamines are described. Enamine 3a undergoes thermal alpha,beta,beta'-annulation with alkenylcarbene complexes 1 and 2 (THF, 60 degrees C), affording semibullvalenes 5. The metalate intermediates 6, resulting from beta,beta'-annulation of the enamines 3a and 4a, were quantitatively formed by running the reaction in hexane at room temperature. Acid-promoted demetalation of 6 afforded endo-2-bicyclo[3.2.1]octen-8-ones 7 and endo/exo-2-bicyclo[3.3.1]nonen-9-ones 8 (endo/exo = 5:1). Using (S)-methoxymethylpyrrolidine-derived enamines 3b and 4b,c allowed highly enantioenriched cycloadducts endo-(+)-7 as well as endo-(-)-8 and exo-(-)-8 to be accessed. The non-heteroatom-stabilized carbene complex 10 was formed from complex 6 by Me(3)SiOTf-promoted elimination of the methoxy group, characterized by (13)C NMR, and transformed into the organic compounds 7, 7-d, and 11 as well as into bicyclo[3.2.1]octan-2,8-diones 14 and cycloheptanones 15. On the basis of this sequence, enantioenriched cycloheptanones (+)-15 were efficiently prepared in one pot from carbene complexes 2 and enamine 3b (51-55% yield, 91-96% ee). Extension of this work to simple Fischer carbene complexes 16 allowed an appropriate way to generate the nonstabilized pentacarbonyl[(phenyl(alkyl)carbene]tungsten complex 17 to be designed, for which the thermal and chemical behavior leading to compounds 18-21 is described.

Journal Article↗

Phosphate tungsten bronze series: crystallographic and structural properties of low-dimensional conductors.

Phosphate tungsten bronzes have been shown to be conductors of low dimensionality. A review of the crystallographic and structural properties of this huge series of compounds is given here, corresponding to the present knowledge of the different X-ray studies and electron microscopy investigations. Three main families are described, monophosphate tungsten bronzes, Ax(PO2)4(WO3)2m, either with pentagonal tunnels (MPTBp) or with hexagonal tunnels (MPTBh), and diphosphate tungsten bronzes, Ax(P2O4)2(WO3)2m, mainly with hexagonal tunnels (DPTBh). The general aspect of these crystal structures may be described as a building of polyhedra sharing oxygen corners made of regular stacking of WO3-type slabs with a thickness function of m, joined by slices of tetrahedral PO4 phosphate or P2O7 diphosphate groups. The relations of the different slabs with respect to the basic perovskite structure are mentioned. The structural description is focused on the tilt phenomenon of the WO6 octahedra inside a slab of WO3-type. In this respect, a comparison with the different phases of the WO3 crystal structures is established. The various modes of tilting and the different possible connections between two adjacent WO3-type slabs involve a great variety of structures with different symmetries, as well as the existence of numerous twins in MPTBp's. Several phase transitions, with the appearance of diffuse scattering and modulation phenomena, were analysed by X-ray scattering measurements and through the temperature dependence of various physical properties for the MPTBp's. The role of the W displacements within the WO3-type slabs, in two modulated structures (m = 4 and m = 10), already solved, is discussed. Finally, the complexity of the structural aspects of DPTBh's is explained on the basis of the average structures which are the only ones solved.

Journal Article↗

Functional analogue reaction systems of the DMSO reductase isoenzyme family: probable mechanism of S-oxide reduction in oxo transfer reactions mediated by bis(dithiolene)-tungsten(IV,VI) complexes.

The recent development of structural and functional analogues of the DMSO reductase family of isoenzymes allows mechanistic examination of the minimal oxygen atom transfer paradigm M(IV) + QO M(VI) O + Q with the biological metals M = Mo and W. Systematic variation of the electronic environment at the WIV center of desoxo bis(dithiolene) complexes is enabled by introduction of para-substituted phenyl groups in the equatorial (eq) dithiolene ligand and the axial (ax) phenolate ligand. The compounds [W(CO)2(S2C2(C6H4-p-X)2)2] (54-60%) have been prepared by ligand transfer from [Ni(S2C2(C6H4-p-X)2)2] to [W(CO)3(MeCN)3]. A series of 25 complexes [W(IV)(OC6H4-p-X')(S2C2(C6H4-p-X)2)2]1- ([X4,X'], X = Br, F, H, Me, OMe; X' = CN, Br, H, Me, NH2; 41-53%) has been obtained by ligand substitution of five dicarbonyl complexes with five phenolate ligands. Linear free energy relationships between E1/2 and Hammett constant p for the electron-transfer series [Ni(S2C2(C6H4-p-X)2)2]0,1-,2- and [W(CO)2(S2C2(C6H4-p-X)2)2]0,1-,2- demonstrate a substituent influence on electron density distribution at the metal center. The reactions [WIV(OC6H4-p-X')(S2C2(C6H4-p-X)2)2]1- + (CH2)4SO [W(VI)O(OC6H4-p-X')(S2C2(C6H4-p-X)2)2]1- + (CH2)4S with constant substrate are second order with large negative activation entropies indicative of an associative transition state. Rate constants at 298 K adhere to the Hammett equations log(k([X4,X']/k[X4,H]) = rho(ax)sigma(p) and log(k[X4,X']/k([H4,X']) = 4rho(eq)sigma(p). Electron-withdrawing groups (EWG) and electron-donating groups (EDG) have opposite effects on the rate such that k(EWG) > k(EDG). The effects of X' on reactivity are found to be approximately 5 times greater than that of X (rho(ax) = 2.1, rho(eq) = 0.44) in the Hammett equation. Using these and other findings, a stepwise oxo transfer reaction pathway is proposed in which an early transition state, of primary W(IV)-O(substrate) bond-making character, is rate-limiting. This is followed by a six-coordinate substrate complex and a second transition state proposed to involve atom and electron transfer leading to the development of the W(VI)=O group. This work is the most detailed mechanistic investigation of oxo transfer mediated by a biological metal.

Binding Sites↗

Peroxovanadium compounds: biological actions and mechanism of insulin-mimesis.

When used alone, both vanadate and hydrogen peroxide (H2O2) are weakly insulin-mimetic, while in combination they are strongly synergistic due to the formation of aqueous peroxovanadium species pV(aq). Administration of these pV(aq) species leads to activation of the insulin receptor tyrosine kinase (IRK), autophosphorylation at tyrosine residues and inhibition of phosphotyrosine phosphatases (PTPs). We therefore undertook to synthesize a series of peroxovanadium (pV) compounds containing one or two peroxo anions, an oxo anion and an ancillary ligand in the inner co-ordination sphere of vanadium, whose properties and insulin-mimetic potencies could be assessed. These pV compounds were shown to be the most potent inhibitors of PTPs yet described. Their PTP inhibitory potency correlated with their capacity to stimulate IRK activity. Some pV compounds showed much greater potency as inhibitors of insulin receptor (IR) dephosphorylation than epidermal growth factor receptor (EGFR) dephosphorylation, implying relative specificity as PTP inhibitors. Replacement of vanadium with either molybdenum or tungsten resulted in equally potent inhibition of IR dephosphorylation. However IRK activation was reduced by greater than 80% suggesting that these compounds did not access intracellular PTPs. The insulin-like activity of these pV compounds were demonstrable in vivo. Intra venous (i.v.) administration of bpV(pic) and bpV(phen) resulted in the lowering of plasma glucose concentrations in normal rats in a dose dependent manner. The greater potency of bpV(pic) compared to bpV(phen) was explicable, in part, by the capacity of the former but not the latter to act on skeletal muscle as well as liver. Finally administration of bpV(phen) and insulin led to a synergism, where tyrosine phosphorylation of the IR beta-subunit increased by 20-fold and led to the appearance of four insulin-dependent in vivo substrates. The insulin-mimetic properties of the pV compounds raises the possibility for their use as insulin replacements in the management of diabetes mellitus.

Animals↗

[Electrophysiologic evaluation of entrapment neuropathy caused by scar formation in recurrent motor branch of the median nerve].

A unique case of mononeuropathy was encountered in a 20-year-old man with isolated involvement of the recurrent motor branch of the right median nerve following a skiing accident one year previously. There was also isolated involvement of the right thenar muscles innervated by the median nerve. Sensation was intact in the right hand and fingers. Conventional conduction studies in the right median nerve yielded no abnormal findings except a reduction in the amplitude of the muscle action potential. However, insertion of a needle electrode into the abductor pollicis brevis muscle revealed some delayed motor unit potentials following electrical stimulation at the wrist. We performed surgery and found the right recurrent motor branch to be entrapped by fibrous scar tissue 3 to 4 mm distal to branching from the median nerve. Direct recordings made from the nerve trunk using a tungsten microelectrode with supramaximal stimulation at the elbow revealed reduced amplitude of the compound nerve action potential distal to the site of entrapment. We concluded that scar tissue resulting from the previous injury had compressed the recurrent motor branch, causing this unique neuropathy.

Adult↗

[Age-related changes in nerve action potentials of median nerve--an analysis using intraneural neurography].

Age-related decrease in peripheral nerve conduction velocity and the amplitude of sensory nerve action potentials is well established in humans. However, evaluation of the sensory nerve action potentials is subject to technical constraints because of its small size and variability of the values. To elucidate age-related differences, we determined the amplitude of median nerve action potentials in 52 healthy individuals aged 16 to 88 years by means of intraneural neurography. A tungsten microelectrode was inserted into the median nerve trunk at the elbow, and compound nerve action potentials evoked by supramaximal electrical stimulation were recorded. The action potentials consisted mainly of triphasic waves. Maximal conduction velocity (Y, m/sec) declined very mildly with age (X, year), showing the regression line of Y = 67.5 - 0.062X. The peak to peak amplitude of the potentials was 466.6 +/- 20.8 (SE) microV and declined gradually with a decrement of 13 microV per decade in the individuals under the age of 50 years. By contrast, in individuals above the age of 50 years, the amplitude (Y, microV) declined steeply, showing the regression line of Y = 977.1 - 9.86X (r = -0.75, p < 0.001) with age (X, year). A significant correlation was observed between amplitude of the sensory nerve action potentials obtained by the conventional technique and that obtained by the intraneural neurography. Nevertheless, an accelerated decrease was not found in the amplitude of the sensory nerve action potentials with age above 50, probably due to the variability of the values.(ABSTRACT TRUNCATED AT 250 WORDS)

Action Potentials↗

[Raman and infrared spectral studies of tungsten organometallic carbyne complex at high external pressure].

The Raman and infrared spectra of complex: [Cl(CO)2 (DPPE) W identical to CC6H4C identical to CC6H4NC]2 Re Cl(CO)3 (DPPE = bis (diphenylphosphino) ethane, (Ph)2PCH2CH2P(Ph)2) were measured at high external pressure (up to about 50 kbar). The pressure induced phase transition was observed near 30 kbar. The pressure dependence d nu/dp of nu (W identical to C) at the low-pressure phase is a little high (0.59 cm-1.(kbar)-1) and is very low (0.04 cm-1.(kbar)-1) at the high-pressure phase. It shows that the pi-backbonding from W to pi*--orbital of CO is strengthened at the high external pressure in fragment Cl(CO)2 (DPPE) W identical to C; The bond intensity and the force constant of W identical to C and nu (W identical to C) are decreasing; This effect compete with the normal increasing nu (W identical to C) on compression.

Carbamates↗

Nanoporous TiO2 and WO3 films by anodization of titanium and tungsten substrates: influence of process variables on morphology and photoelectrochemical response.

The photoelectrochemical response of nanoporous films, obtained by anodization of Ti and W substrates in a variety of corrosive media and at preselected voltages in the range from 10 to 60 V, was studied. The as-deposited films were subjected to thermal anneal and characterized by scanning electron microscopy and X-ray diffraction. Along with the anodization media developed by previous authors, the effect of poly(ethylene glycol) (PEG 400) or D-mannitol as a modifier to the NH4F electrolyte and glycerol addition to the oxalic acid electrolyte was studied for TiO2 and WO3, respectively. In general, intermediate anodization voltages and film growth times yielded excellent-quality photoelectrochemical response for both TiO2 and WO3 as assessed by linear-sweep photovoltammetry and photoaction spectra. The photooxidation of water and formate species was used as reaction probes to assess the photoresponse quality of the nanoporous oxide semiconductor films. In the presence of formate as an electron donor, the incident photon to electron conversion efficiency (IPCE) ranged from approximately 130% to approximately 200% for both TiO2 and WO3 depending on the film preparation protocol. The best photoactive films were obtained from poly(ethylene glycol) (PEG 400) containing NH4F for TiO2 and from aqueous NaF for WO3.

Ammonium Compounds↗

In vitro molybdenum ligation to molybdopterin using purified components.

We have previously shown that Escherichia coli MoeA and MogA are required in vivo for the final step of molybdenum cofactor biosynthesis, the addition of the molybdenum atom to the dithiolene of molybdopterin. MoeA was also shown to facilitate the addition of molybdenum in an assay using crude extracts from E. coli moeA(-) cells. The experiments detailed in this report utilized an in vitro assay for MoeA-mediated molybdenum ligation to de novo synthesized molybdopterin using only purified components and monitoring the reconstitution of human aposulfite oxidase. In this assay, maximum activation was achieved by delaying the addition of aposulfite oxidase to allow for adequate molybdenum coordination to occur. Tungsten, which substitutes for molybdenum in hyperthermophilic organisms, could also be ligated to molybdopterin using this system, though not as efficiently as molybdenum. Addition of thiol compounds to the assay inhibited activity. Addition of MogA also inhibited the reaction. However, in the presence of ATP and magnesium, addition of MogA to the assay increased the level of aposulfite oxidase reconstitution beyond that observed with MoeA alone. This effect was not observed in the absence of MoeA. The results presented here demonstrate that MoeA is responsible for mediating molybdenum ligation to molybdopterin, whereas MogA stimulates this activity in an ATP-dependent manner.

Adenosine Triphosphate↗

Synthesis, structure, and electrochemical studies of molybdenum and tungsten dinitrogen, diazenido, and hydrazido complexes that contain aryl-substituted triamidoamine ligands.

One-electron reduction of [ArN(3)N]MoCl complexes (Ar = C(6)H(5), 4-FC(6)H(4), 4-t-BuC(6)H(4), 3,5-Me(2)C(6)H(3)) yields complexes of the type [ArN(3)N]Mo-N=N-Mo[ArN(3)N], while two-electron reduction yields ([ArN(3)N]Mo-N=N)(-) derivatives (Ar = C(6)H(5), 4-FC(6)H(4), 4-t-BuC(6)H(4), 3,5-Me(2)C(6)H(3), 3,5-Ph(2)C(6)H(3), and 3,5-(4-t-BuC(6)H(4))(2)C(6)H(3)). Compounds that were crystallographically characterized include ([t-BuC(6)H(4)N(3)N]Mo)(2)(N(2)), Na(THF)(6)([PhN(3)N]Mo-N=N)(2)Na(THF)(3), [t-BuC(6)H(4)N(3)N]Mo-N=N-Na(15-crown-5), and ([Ph(2)C(6)H(3)N(3)N]MoNN)(2)Mg(DME)(2). Compounds of the type [ArN(3)N]Mo-N=N-Mo[ArN(3)N] do not appear to form when Ar = 3,5-Ph(2)C(6)H(3) or 3,5-(4-t-BuC(6)H(4))(2)C(6)H(3), presumably for steric reasons. Treatment of diazenido complexes (e.g., [ArN(3)N]Mo-N=N-Na(THF)(x)) with electrophiles such as Me(3)SiCl or MeOTf yielded [ArN(3)N]Mo-N=NR complexes (R = SiMe(3) or Me). These species react further to yield ([ArN(3)N]Mo-N=NMe(2))(+) species in the presence of methylating agents. Addition of anionic methyl reagents to ([ArN(3)N]Mo-N=NMe(2))(+) species yielded [ArN(3)N]Mo(N=NMe(2))(Me) complexes. Reduction of [4-t-BuC(6)H(4)N(3)N]WCl under dinitrogen leads to a rare ([t-BuC(6)H(4)N(3)N]W)(2)(N(2)) species that can be oxidized by two electrons to give a stable dication (as its BPh(4)(-) salt). Reduction of hydrazido species leads to formation of Mo=N in low yields, and only dimethylamine could be identified among the many products. Electrochemical studies revealed expected trends in oxidation and reduction potentials, but also provided evidence for stable neutral dinitrogen complexes of the type [ArN(3)N]Mo(N(2)) when Ar is a relatively bulky terphenyl substituent.

Amines↗