Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Thermometry”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47Linked to original sources

Re-setting the biologic rationale for thermal therapy.

This review takes a retrospective look at how hyperthermia biology, as defined from studies emerging from the late 1970s and into the 1980s, mis-directed the clinical field of hyperthermia, by placing too much emphasis on the necessity of killing cells with hyperthermia in order to define success. The requirement that cell killing be achieved led to sub-optimal hyperthermia fractionation goals for combinations with radiotherapy, inappropriate sequencing between radiation and hyperthermia and goals for hyperthermia equipment performance that were neither achievable nor necessary. The review then considers the importance of the biologic effects of hyperthermia that occur in the temperature range that lies between that necessary to kill substantial proportions of cells and normothermia (e.g. 39-42 degrees C for 1 h). The effects that occur in this temperature range are compelling-including inhibition of radiation-induced damage repair, changes in perfusion, re-oxygenation, effects on macromolecular and nanoparticle delivery, induction of the heat shock response and immunological stimulation, all of which can be exploited to improve tumour response to radiation and chemotherapy. This new knowledge about the biology of hyperthermia compels one to continue to move the field forward, but with thermal goals that are eminently achievable and tolerable by patients. The fact that lower temperatures are incorporated into thermal goals does not lessen the need for non-invasive thermometry or more sophisticated hyperthermia delivery systems, however. If anything, it further compels one to move the field forward on an integrated biological, engineering and clinical level.

Cell Death↗

Temperature data analysis for 22 patients with advanced cervical carcinoma treated in Rotterdam using radiotherapy, hyperthermia and chemotherapy: a reference point is needed.

INTRODUCTION: The growing interest and participation in multi-institutional trials involving deep hyperthermia treatment is an important step towards the further consolidation of hyperthermia as an oncological treatment modality. However, the differences in the clinical procedures of hyperthermia application also raises questions as how to compare the reported temperatures data obtained by the different institutes. In this study our recent developed approach, RHyThM (Rotterdam Hyperthermia Thermal Modulator), has been used for thermal data analysis to investigate the temperature dynamics behaviour of a series of deep hyperthermia treatments. PATIENTS AND METHODS: All 22 patients (104 hyperthermia treatments) with locally advanced cervical carcinoma who participated in a feasibility study for treatment with a three-modality therapy were selected. The patients received mega-voltage external beam radiotherapy to the pelvis in daily fractions of 2 Gy five times a week to a total dose of 46 Gy and additional brachytherapy, at least four courses of weekly cisplatin (40 mg m-2) and five sessions of weekly loco regional deep hyperthermia treatments with the BSD2000-3D with the Sigma 60 or the Sigma-eye applicators at frequencies 70-120 MHz. Using RHyThM tissue type was defined along the insertion length, based on the CT scan information in radiotherapy position, for each single treatment. A step change in the slope of the profile of the first temperature map was identified to verify the insertion length of the thermometry catheter and precise location of the transition between in- and outside the body. Data analysis was performed based on the temperature readout provided by RHyThM. RESULTS: The temperature and RF-power data of 97 treatments could be analysed. The intra-vaginal temperature indices were slightly lower than those for bladder and rectum. The average T50 (median temperature) in all lumens, i.e. bladder, vagina and rectum, was 40.4 +/- 0.6 degrees Celsius. The average vagina all lumen T50 was 40.0 +/- 0.8 degrees Celsius. The average bladder and rectum all lumen T50 was 40.6 +/- 0.7 degrees Celsius and 40.5 +/- 0.6, respectively. When the analysis was restricted to the deepest 5 cm of the vagina lumen, the average T50 was 39.8 +/- 0.9 degrees Celsius. Good correlation exists between the various temperature indices like T20, T50 and T90, for all lumen measurements in bladder, vagina and rectum. No correlation was found between temperature indices and treatment number. For the complete patient population, no relationship was found between T50 and net integrated RF-power applied. In an explorative analysis on individual patients a positive correlation coefficient or trend was found in 14 patients between normalized net integrated RF-power and vagina T50. CONCLUSION: Average all lumen T50 for bladder, vagina and rectum differ less than 1 degrees Celsius, indicating that a large volume was heated relatively homogeneously. The vagina T50 value depends on how many measurement points are included for the analysis. In this group of patients the vagina T50 of the first treatment is not a good measure to discriminate between patients with 'heatable' and 'non-heatable' tumours. In order to compare temperature data reported by different institutes dealing with the same group of patients, one needs a strict and clear agreement on which temperature measurements or reference point(s) that should be included in the analysis.

Adult↗

Reliability of temperature and SAR measurements at oesophageal tumour locations.

INTRODUCTION: For treatment of oesophageal cancer, neo-adjuvant locoregional hyperthermia (HT) has been applied in combination with chemotherapy (ChT) +/- radiotherapy (RT) at the institute. Until now, 26 patients were treated within a completed phase I study combining HT with ChT and 29 patients within an ongoing phase II study combining HT with ChT + RT. METHODS: HT was given with the 70 MHz AMC-4 waveguide system. Initially, oesophageal temperatures were measured using multi-sensor thermocouple probes (TCs) inside a nasogastric tube (NT), but the question arose whether these measurements were reliable enough to quantify the achieved tumour temperatures accurately. Presently, TCs are mounted on the outside of an inflatable balloon catheter (BC) for better intra-luminal fixation and better contact with the tumour. During 14 treatment sessions in four patients TCs inside a NT and mounted on a BC were used simultaneously. Data from these 14 treatment sessions were used to compare temperature and Specific Absorption Rate (SAR) measurements ('DeltaT-measurements') using NTs or BCs. To determine the predictive value of the local SAR for the tumour temperatures achieved during treatment, the relation between the initial DeltaT and steady state temperature (SST) was evaluated. RESULTS: There was a strong correlation between the temperature measured in the NT (Ttube) and the temperature measured with a BC (Tballoon): R = 0.88 +/- 0.13. However, Ttube was on average approximately 1 degrees C higher than Tballoon and there was a large variation between the different treatments in the relation between both measurements, rendering Ttube a probably unreliable measure for tumour temperatures. The correlation between the DeltaT measured in the NT (DeltaTtube) and with a BC (DeltaTballoon) was rather weak: R = 0.46 +/- 0.25. The correlation between the initial DeltaT and the SST was much stronger for the BC measurements, R = 0.78 +/- 0.19, than for the NT measurements, R = 0.61 +/- 0.23. Thus, DeltaTballoon has a higher predictive value for the achieved tumour temperatures than DeltaTtube. Both DeltaT and SST were generally higher for the NT measurements than for the BC measurements, suggesting an over-estimation of tumour temperatures. Averaged over all treatments in the phase I trial using a NT (20 treatments) or a BC (45 treatments), T90 was significantly higher when measured with a NT. CONCLUSION: Oesophageal temperature and SAR (DeltaT) measurements inside a NT are less reliable than BC measurements. These artefacts are due to bad thermal contact with the tumour tissue and are, therefore, not specific for thermocouple thermometry. For reliable temperature or SAR measurements inside lumina or cavities good thermal contact must be assured, e.g. by using a balloon catheter.

Brachytherapy↗

A two-parameter method for the estimation of ultrasound-induced temperature artifacts.

A two-parameter method for the estimation of ultrasound-induced temperature artifacts was evaluated and compared with other commonly applied methods using analytical solutions to the bioheat equation. The two parameters are the exponent of the assumed temperature decay curve after power is turned off and the baseline temperature. These parameters are found by optimizing the fit of the temperature data from 30 to 60s after power is turned off. The artifact is modelled as a point source at the centre of a Gaussian temperature distribution. The blood flow, baseline temperature, and variance of the Gaussian temperature distribution were varied to simulate different clinical situations. Noise was added to the model to investigate the effects of thermometry resolution and sampling intervals. It was found that for artifacts of < 2 degrees C the two-parameter method had errors of less than 0.25 degrees C, whereas other methods generally had greater errors depending on the conduction rate and blood flow rate. The effects of the temperature sampling interval and resolution on the ability of the methods to estimate the artifact were also investigated, and it was found that the two-parameter method was much more sensitive to these parameters than other commonly applied methods.

Blood Flow Velocity↗

Current practice and knowledge of nurses regarding patient temperature measurement.

BACKGROUND: The measurement of patient temperature by nursing staff is a common activity. In recent years this area of practice has been largely under-investigated despite the introduction of new technologies into clinical practice, such as infrared tympanic thermometry (IRTT). STUDY AIM: To investigate current practice in clinical temperature measurement in general, and the use of IRTT in particular by nursing staff. SAMPLE AND METHODS: 139 nursing staff from a general hospital in the UK were surveyed via a self-administered questionnaire. MAIN FINDINGS AND CONCLUSIONS: The group most involved in temperature measurement was characterized as nursing auxiliary grades with the fewest years of experience. IRTT was the most frequently-used method for measuring patient temperatures, with high perceived accuracy, reliability, ease of use and acceptability to patients. A poor level of understanding and training in the use of IRTT was revealed across all clinical grades. Recommendations for future investigations are made.

Employment↗

Thermoregulatory effects of melatonin in relation to sleepiness.

Thermoregulatory processes have long been implicated in the initiation of human sleep. In this paper, we review our own studies conducted over the last decade showing a crucial role for melatonin as a mediator between the thermoregulatory and arousal system in humans. Distal heat loss, via increased skin temperature, seems to be intimately coupled with increased sleepiness and sleep induction. Exogenous melatonin administration during the day when melatonin is essentially absent mimics the endogenous thermophysiological processes occurring in the evening and induces sleepiness. Using a cold thermic challenge test, it was shown that melatonin-induced sleepiness occurs in parallel with reduction in the thermoregulatory set-point (threshold); thus, melatonin may act as a circadian modulator of the thermoregulatory set-point. In addition, an orthostatic challenge can partially block the melatonin-induced effects, suggesting an important role of the sympathetic nervous system as a link between the thermoregulatory and arousal systems. A topographical analysis of finger skin temperature with infrared thermometry revealed that the most distal parts of the fingers, i.e., fingertips, represent the important skin regions for heat loss regulation, most probably via opening the arteriovenous anastomoses, and this is clearly potentiated by melatonin. Taken together, melatonin is involved in the fine-tuning of vascular tone in selective vascular beds, as circulating melatonin levels rise and fall throughout the night. Besides the role of melatonin as "nature's soporific", it can also serve as nature's nocturnal vascular modulator.

Adult↗

Accuracy of digital tympanic, oral, axillary, and rectal thermometers compared with standard rectal mercury thermometers.

OBJECTIVE: To compare a number of electronic tympanic, oral, axillary, and rectal measurements with those taken with a standard rectal mercury thermometer. DESIGN: Prospective open study. SETTING: County hospital, Denmark. SUBJECTS: 200 patients. INTERVENTIONS: Each of 200 patients had 6 electronic measurements of body temperature: 3 in the auditory canal using Ivac Core Check 2090A, Diateck 9000, and Genius 3000A, 1 in the axilla using Terumo Digital C202. 1 in the mouth using Terumo Digital C402, and 1 in the rectum using a Terumo Digital C402. These were compared with readings from a standard mercury glass thermometer in the rectum. MAIN OUTCOME MEASURES: Accuracy of electronic thermometry. RESULTS: The rectal electronic measurements were closest to the rectal mercury readings, with a mean (SD) of -0.05 degrees C (0.12), whereas the other measurements gave unacceptable SDs of temperature differences ranging from 0.41 degrees C to 0.53 degrees C. CONCLUSIONS: We conclude that electronic rectal temperature measurements are the most accurate. We do not recommend electronic tympanic, oral, or axillary measurements.

Adolescent↗

Prosthetic heart valves and annuloplasty rings: assessment of magnetic field interactions, heating, and artifacts at 1.5 Tesla.

The purpose of this study was to determine the magnetic resonance (MR) safety aspects and artifacts for three different heart valve prostheses and two different annuloplasty rings that have not been evaluated previously in association with the 1.5-T MR environment. Ex vivo testing was performed using previously described techniques for the evaluation of magnetic field interactions (deflection angle and torque), heating (gel-filled phantom and fluoroptic thermometry; 15 min of MR imaging at a whole body-averaged specific absorption rate of 1.2 W/kg), and artifacts (using T1-weighted, spin echo, and gradient echo pulse sequences). One heart valve prosthesis and one annuloplasty ring showed no magnetic field interactions. Two heart valve prostheses and one annuloplasty ring displayed relatively minor magnetic field interactions (i.e., deflection angle < or = 6 degrees, torque, +1). Heating was < or = 0.7 degrees C for the five different implants. Artifacts varied depending on the amount and type of metal used to make the implants. For the three heart valve prostheses and two annuloplasty rings, the lack of substantial magnetic field interactions and relatively minor hearing indicated that MR procedures may be conducted safetly in patients with these implants using MR systems operating with static magneticfields of 1.5 T or less. Notably, these findings essentially apply to 54 different heart valve prostheses and 37 different annuloplasty rings (i.e., based on the various models and sizes available for these implants).

Artifacts↗

Limitations of forehead infrared body temperature detection for fever screening for severe acute respiratory syndrome.

We investigated alternative measurement methodology for infrared body thermometry to increase accuracy for outdoor fever screening during the 2003 SARS epidemic. Our results indicate that the auditory meatus temperature is a superior alternative compared with the forehead body surface temperature due to its close approximation to the tympanic temperature.

Body Temperature↗

The feasibility of MRI-guided whole prostate ablation with a linear aperiodic intracavitary ultrasound phased array.

Over the past decade, numerous minimally invasive thermal procedures have been investigated to treat benign prostate hyperplasia and prostate cancer. Of these methods, ultrasound has shown considerable promise due to its ability to produce more precise and deeper thermal foci. In this study, a linear, transrectal ultrasound phased array capable of ablating large tissue volumes was fabricated and evaluated. The device was designed to be compatible for use with MRI guidance and thermometry. The intracavitary applicator increases treatable tissue volume by using an ultrasonic motor to provide a mechanical rotation angle of up to 100 degrees to a 62-element 1D ultrasound array. An aperiodic array geometry was used to reduce grating lobes. In addition, a specially designed Kapton interconnect was used to reduce cable crosstalk and hence also improve the acoustic efficiency of the array. MRI-guided in vivo and ex vivo experiments were performed to verify the array's large-volume ablative capabilities. Ex vivo bovine experiments were performed to assess the focusing range of the applicator. The array generated foci in a 3 cm (2 to 5 cm from the array surface along the axis normal to the array) by 5.5 cm (along the long axis of the array) by 6 cm (along the transverse axis of the array at a depth of 4 cm) volume. In vivo rabbit thigh experiments were performed to evaluate the lesion producing capabilities in perfused tissue. The array generated 3 cm x 2 cm x 2 cm lesions with 8 to 12 half-minute sonications equally spaced in the volume. The results indicate that transrectal ultrasound coagulation of the whole prostate is feasible with the developed device.

Animals↗

Sliding window dual gradient echo (SW-dGRE): T1 and proton resonance frequency (PRF) calibration for temperature imaging in polyacrylamide gel.

The aim of the work is to evaluate a magnetic resonance imaging (MRI) thermometry sequence suitable for targeting of focused ultrasound (FUS) when used in vascular occlusion studies. A sliding window dual gradient echo (SW-dGRE) sequence was used. This sequence has the capability of monitoring both T1 relaxation and phase changes, which vary with temperature. Preliminary work involved quantification of the changes in T1 relaxation time with temperature and obtaining the PRF shift coefficient in polyacrylamide gel as it underwent an exothermic reaction during polymerization (avoiding the use of an external heat source). Temperature changes were visualized using thermal maps acquired with the sequence. For FUS guidance a thermal imaging technique is required with a temporal resolution <5 s, a spatial resolution of approximately 1 mm and a temperature resolution of approximately 5 degrees C. The sequence was optimized to improve the CNR (contrast to noise ratio) and SNR (signal to noise ratio) in the phase and magnitude images respectively. The PRF coefficient obtained for the polyacrylamide gel was -9.98 +/- 0.24 ppb degrees C(-1), whilst deltaT1 and temperature change were related by a proportionality factor, the T1 temperature coefficient, of 102.3 +/- 2.9 ms degrees C(-1). The sequence produces an image at every 1.4 s interval. In both magnitude and phase data, the in-plane resolution is +/- 1.2 mm and the temperature resolution is approximately 2 degrees C. The advantage of this sequence is that the temperature obtained from the magnitude data can be confirmed independently using the phase data and vice versa. Thus the sequence can essentially be crosschecked.

Acrylic Resins↗

In vitro assessment of tissue heating near metallic medical implants by exposure to pulsed radio frequency diathermy.

A patient with bilateral implanted neurostimulators suffered significant brain tissue damage, and subsequently died, following diathermy treatment to hasten recovery from teeth extraction. Subsequent MRI examinations showed acute deterioration of the tissue near the deep brain stimulator (DBS) lead's electrodes which was attributed to excessive tissue heating induced by the diathermy treatment. Though not published in the open literature, a second incident was reported for a patient with implanted neurostimulators for the treatment of Parkinson's disease. During a diathermy treatment for severe kyphosis, the patient had a sudden change in mental status and neurological deficits. The diathermy was implicated in causing damage to the patient's brain tissue. To investigate if diathermy induced excessive heating was possible with other types of implantable lead systems, or metallic implants in general, we conducted a series of in vitro laboratory tests. We obtained a diathermy unit and also assembled a controllable laboratory exposure system. Specific absorption rate (SAR) measurements were performed using fibre optic thermometry in proximity to the implants to determine the rate of temperature rise using typical diathermy treatment power levels. Comparisons were made of the SAR measurements for a spinal cord stimulator (SCS) lead, a pacemaker lead and three types of bone prosthesis (screws, rods and a plate). Findings indicate that temperature changes of 2.54 and 4.88 degrees C s(-1) with corresponding SAR values of 9129 and 17,563 W kg(-1) near the SCS and pacemaker electrodes are significantly higher than those found in the proximity of the other metallic implants which ranged from 0.04 to 0.69 degrees C s(-1) (129 to 2471 W kg(-1)). Since the DBS leads that were implanted in the reported human incidents have one-half the electrode surface area of the tested SCS lead, these results imply that tissue heating at rates at least equal to or up to twice as much as those reported here for the SCS lead could occur for the DBS leads.

Body Temperature↗

Experience with a small animal hyperthermia ultrasound system (SAHUS): report on 83 tumours.

An external local ultrasound (US) system was developed to induce controlled hyperthermia of subcutaneously implanted tumours in small animals (e.g., mice and rats). It was designed to be compatible with a small animal positron emission tomography scanner (microPET) to facilitate studies of hyperthermia-induced tumour re-oxygenation using a PET radiopharmaceutical, but it is applicable for any small animal study requiring controlled heating. The system consists of an acrylic applicator bed with up to four independent 5 MHz planar disc US transducers of 1 cm in diameter, a four-channel radiofrequency (RF) generator, a multiple thermocouple thermometry unit, and a personal computer with custom monitoring and controlling software. Although the system presented here was developed to target tumours of up to 1 cm in diameter, the applicator design allows for different piezoelectric transducers to be exchanged and operated within the 3.5-6.5 MHz band to target different tumour sizes. Temperature feedback control software was developed on the basis of a proportional-integral-derivative (PID) approach when the measured temperatures were within a selectable temperature band about the target temperature. Outside this band, an on/off control action was applied. Perfused tissue-mimicking phantom experiments were performed to determine optimum controller gain constants, which were later employed successfully in animal experiments. The performance of the SAHUS (small animal hyperthermia ultrasound system) was tested using several tumour types grown in thighs of female nude (nu/nu) mice. To date, the system has successfully treated 83 tumours to target temperatures in the range of 41-43 degrees C for periods of 65 min on average.

Algorithms↗

Towards patient specific thermal modelling of the prostate.

The application of thermal modelling for hyperthermia and thermal ablation is severely hampered by lack of information about perfusion and vasculature. However, recently, with the advent of sophisticated angiography and dynamic contrast enhanced (DCE) imaging techniques, it has become possible to image small vessels and blood perfusion bringing the ultimate goal of patient specific thermal modelling closer within reach. In this study dynamic contrast enhanced multi-slice CT imaging techniques are employed to investigate the feasibility of this concept for regional hyperthermia treatment of the prostate. The results are retrospectively compared with clinical thermometry data of a patient group from an earlier trial. Furthermore, the role of the prostate vasculature in the establishment of the prostate temperature distribution is studied. Quantitative 3D perfusion maps of the prostate were constructed for five patients using a distributed-parameter tracer kinetics model to analyse dynamic CT data. CT angiography was applied to construct a discrete vessel model of the pelvis. Additionally, a discrete vessel model of the prostate vasculature was constructed of a prostate taken from a human corpse. Three thermal modelling schemes with increasing inclusion of the patient specific physiological information were used to simulate the temperature distribution of the prostate during regional hyperthermia. Prostate perfusion was found to be heterogeneous and T3 prostate carcinomas are often characterized by a strongly elevated tumour perfusion (up to 70-80 ml 100 g(-1) min(-1)). This elevated tumour perfusion leads to 1-2 degrees C lower tumour temperatures than thermal simulations based on a homogeneous prostate perfusion. Furthermore, the comparison has shown that the simulations with the measured perfusion maps result in consistently lower prostate temperatures than clinically achieved. The simulations with the discrete vessel model indicate that significant pre-heating takes place in the prostate capsule vasculature which forms a possible explanation for the discrepancy. Pre-heating in the larger pelvic vessels is very moderate, approximately 0.1-0.3 degrees C. In conclusion, perfusion imaging provides important input for thermal modelling and can be used to obtain a lower limit on the prostate and tumour temperature in regional hyperthermia. However, it is not sufficient to calculate in detail the prostate temperature distribution in individual patients. The prostate vasculature plays such a crucial role that a patient specific discrete vessel model of the prostate vasculature is required.

Body Temperature↗

Practical experience in electromagnetic hyperthermia quality control procedures within the context of international guidelines.

Recent international guidelines on hyperthermia (HT) quality assurance have pointed out the necessity of defining standard operative procedures and technical checks to guarantee an accurate performance of HT treatments. In the present paper, experience is described of quality control procedures that are performed in agreement with the more general guidelines concerning thermometry, sensor positioning, phantoms, applicator characterisation, and electromagnetic (EM) radiation leakage. This practical experience comes from the use of equipment for superficial and loco-regional HT working in the range 13.56-915 MHz.

Evaluation Studies as Topic↗

Experimental assessment of electrical impedance imaging for hyperthermia monitoring.

Two experimental studies are presented that attempt to assess the use of electrical impedance tomography (EIT) to map thermal changes deep in the body. The first was a joint study between our group in Sheffield and the Daniel den Hoed Cancer Center in Rotterdam, funded by the COMAC-BME Hyperthermia project. Phantom and in vivo experiments were conducted with a deep heating ring-capacitive hyperthermia device; the results highlighted some of the inherent problems (electromagnetic interference, nonuniform sensitivity) that remain to be solved for this application. The second experimental study involved heating the stomachs of volunteers by pumping known quantities of liquid (a salt/glucose solution, conductivity 5 mS) at controlled temperatures (25, 37 and 47 degrees C) in and out of the stomach via a nasogastric tube. Results indicated that the level of thermal change induced by these liquids could be reproducibly measured by impedance imaging. Both studies were a further step in assessing the capabilities of EIT for noninvasive monitoring of deep body hyperthermia. The results are encouraging and indicate the value of continued development of EIT for non-invasive thermometry.

Electric Conductivity↗

Evaluation of magnetic fluid hyperthermia in a standard rat model of prostate cancer.

PURPOSE: To examine the feasibility and potential of magnetic fluid hyperthermia (MFH) as a minimally invasive method for hyperthermia treatment of prostate cancer. MATERIALS AND METHODS: Orthotopic Dunning R3327 prostate tumors were induced in 20 male Copenhagen rats. The animals either received MFH treatment following intratumoral administration of magnetic fluids or were used as either tumor growth controls for determination of iron distribution in selected organs or as histologic controls without MFH treatment. The MFH treatments were carried out at 45 degrees C or 50 degrees C using an AC magnetic field applicator system designed for small animals. RESULTS: Sequential treatments with MFH were possible following a single intratumoral injection of magnetic fluid. Intratumoral temperatures of 50 degrees C and more were obtained and were monitored online using fluoro-optic thermometry. Four days after MFH treatments, 79% of the injected dose of ferrites was still present in the prostate. CONCLUSIONS: The successful intraprostatic nanoparticle infiltration and stable steady-state intratumoral treatment temperatures demonstrate the feasibility of MFH in a prostate cancer model. Efficacy and survival benefit must be confirmed in further experiments.

Animals↗

Hollow waveguide for mid and thermal infrared radiation.

OBJECTIVE: A novel type of flexible hollow waveguide that facilitates delivery of infrared radiation from source to treatment site, and made of polyimide tubes, was developed. SUMMARY BACKGROUND DATA: Polyimide tubes with flat internal wall and optimal conditions of deposition of guiding metal and dielectric layers were used to obtain low losses of radiation and high quality of beam shape. METHODS: Etching of the internal wall of polyimide tubes, high reflective metal (silver) layers and suitable dielectric layers (index of refraction and thickness) were deposited as guiding elements to obtain a waveguide suitable for infrared transmission. RESULTS: Polyimide waveguides of very low attenuation (transmission of approximately 95% through 1 meter length) beam profile of variable shape as a function of bending radius and type of tbe, large delivered radiation power (more than 25 Watts), constant delivered power as a function of time (during more than 250 seconds), and very low divergence of the delivered beam (angle of divergence less than 1 degree), were obtained. The polyimide waveguides also are very flexible and may be bent to a radius of bending less than 5 cm. The polyimide plastic hollow waveguide is suitable for medical applications (chemical and physical stable and nontoxic). CONCLUSIONS: The optical and mechanical parameters correspond with those requested for applications in medicine for infrared laser treatments or radiometric measurements (non-contact thermometry). Waveguides for applications in surgery are under preparation.

Carbon Dioxide↗