Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “TOOTH ABRASION”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47Linked to original sources

Clinical profiles of individuals with and without root surface caries.

As part of a collaborative multidisciplinary investigation of root surface caries (RSC), 273 subjects (median age = 57) were clinically evaluated for coronal caries, debris, calculus, gingivitis, periodontal pocketing, recession, abrasion, as well as RSC. The entire study group was divided into three subgroups: (1) subjects whose exposed root surface were without lesions or restorations (non-diseased individuals, n = 43); (2) subjects whose exposed root surfaces had one or more lesions and may or may not have had restorations (diseased individuals, n = 110); (3) subjects with one or more restorations but no lesions, since it was not known whether these restorations were preceded by RSC or abrasion the disease status of these individuals was unclear (n = 120). A comparison of Subgroup 1 (unequivocally non-diseased) and Subgroup 2 (unequivocally diseased) revealed that subjects without RSC had more teeth, less coronal caries, less recession, less debris, less calculus, less gingivitis, and more abrasion. We infer that the common factor underlying most if not all of the subgroup differences is oral hygiene which must therefore be a major disease determinant.

Dental Calculus↗

Influence of toothbrushing on enamel softening and abrasive wear of eroded bovine enamel: an in situ study.

This study assessed the surface softening and abrasive wear of eroded bovine enamel with or without the influence of toothbrushing. Five volunteers took part in this in situ study of 5 days. They wore acrylic palatal appliances containing 6 bovine enamel blocks divided in two rows with 3 blocks, which corresponded to the studied groups: erosion without toothbrushing (GI) and erosion with toothbrushing (GII). The blocks were subjected to erosion by immersion of the appliances in a cola drink for 10 minutes, 4 times a day. After that, no treatment was performed in one row (GI), whereas the other row was brushed (GII). The appliance was then replaced into the mouth. Enamel alterations were determined using profilometry and microhardness tests. Data were tested using paired Students t test (p < 0.05). The mean wear values (microm) and percentage of superficial microhardness change (%SMHC) were respectively: GI--2.77 +/- 1.21/91.61 +/- 3.68 and GII--3.80 +/- 0.91/58.77 +/- 11.47. There was a significant difference in wear (p = 0.001) and %SMHC (p = 0.001) between the groups. It was concluded that the wear was more pronounced when associated to toothbrushing abrasion. However, toothbrushing promoted less %SMHC due to the removal of the altered superficial enamel layer.

Adult↗

[Prevalence of non carious dental lesions in the department of Dakar].

Non carious dental lesions are destructions of dental external surfaces originating from non bacterial cause in opposition to dental caries. We distinguish 5 types of non carious dental lesions: attrition, abrasion, abfraction, erosion and demastication. These lesions may be pathological or physiological. Data dealing with them are not very numerous in the literature. Their study shows a real interest in conservative dentistry because of problems both aesthetic and functional they set We carried out an epidemiological trial in the department of Dakar with as aim providing data on the prevalence of these lesions. Our results have disclosed the following rates of prevalence: 60% of attrition, 25,55% of abrasion, 7,22% of abfraction, 5,55% of demastication and 1,68% of erosion. The results indicate once more the importance of the need for clinical evaluation of those dental lesions.

Female↗

[Air polishing instruments. Review of literature].

The popularity of polishing air devices (AP) is rising with the increased distribution of commercial units in both United States and European dental offices and clinics. The instrument's efficiency and effectiveness in stain removal has been demonstrated with minimal impact on soft tissue trauma and abrasion. This article reviews the literature on AP. Future research is indicated to explore surgical clinical applications of airpowder polishing as well as more detailed information regarding the biological basis for its use.

Air↗

Clinical efficacy of a low abrasive dentifrice for the relief of cervical dentinal hypersensitivity.

2 strontium chloride hexahydrate-containing dentifrices (SCH), similar except for their respective abrasive systems, were compared in a 2-month randomised double-blind parallel clinical study to evaluate their comparative effectiveness in terms of cervical dentinal hypersensitivity. 2 groups of 20 subjects, each with cervical dentinal hypersensitivity, were evaluated for tactile sensitivity by Yeaple probe, air sensitivity using a dental air syringe and subjective perception of pain by means of a visual analogue scale. There was no difference between the dentifrices as regards reduction of cervical dentinal hypersensitivity at each time point. The response to both dentifrices was evident within 4 weeks of use and the degree of improvement increased throughout the 8-week study period. The results support the conclusion that changing the abrasive component of SCH dentifrices did not significantly increase or decrease the (desensitizing) activity of the original product.

Adult↗

In situ evaluation of different remineralization periods to decrease brushing abrasion of demineralized enamel.

The aim of the present in situ study was to evaluate the effect of different periods of intraoral remineralization to decrease the susceptibility of previously demineralized enamel against toothbrushing abrasion. Six human enamel specimens (A-F) were recessed in the buccal aspects of each of eight intraoral appliances which were worn for 21 days by 8 panelists. Demineralization of the samples was performed twice a day extraorally in the acidic beverage Sprite Light for 90 s. Subsequently, the enamel specimens were brushed at different times. Specimen A was brushed immediately after the demineralization. The remaining samples B-E were brushed after the intraoral appliances had been worn for various periods of remineralization: specimen B, 10 min; C, 20 min; D, 30 min and E, 60 min, respectively. Specimen F was only demineralized and remineralized, but not brushed. After 21 days, enamel wear was measured with a laser profilometer. The following values (mean +/- standard deviation) were obtained: specimen A, 6.78+/-2.71 microm; B, 5.47+/-3.39 microm; C, 6.06+/-3.18 microm; D, 5.43+/-2.58 microm; E 4.78+/-2.57 microm, and F 0.66+/-1.11 micro;m. Analysis of variance revealed a significant influence of remineralization period on abrasive wear. However, even after a remineralization period of 60 min the wear was significantly increased as compared to the demineralized, but not brushed control. It is concluded that (1) abrasion resistance of softened enamel increases with remineralization period and (2) at least 60 min should elapse before toothbrushing after an erosive attack.

Amines↗

The surface effects of erosion and abrasion on dentine with and without a protective layer.

OBJECTIVE: The aim of this in situ study was to investigate with four imaging modalities whether covering dentine with adhesive resins could protect against erosion from acids. The objectives were to observe and quantify the effects of acids and the soft tissues, especially the tongue, on dentine and the bonding agents using four assessment techniques: qualitative assessment with SEM, surface roughness and thickness of resin with the TSM and volume loss with the laser profilometer. DESIGN: An in situ investigation using extracted dentine sections embedded in splints held on the palate of 10 volunteers. The dentine sections were protected by two resins and subjected to a tooth wear regime. RESULTS: Both Seal and Protect and Opitbond Solo protected the tooth surfaces from a tooth wear regime. There were no statistical differences between the control surfaces and those protected with dentine bonding agents for resin thickness, roughness and profilometry. The appearance of the slabs under both confocal and SEM showed that the material remained in place despite a vigorous wear regime and therefore protected the tooth surface. CONCLUSIONS: For patients with uncontrolled erosion or tooth wear, applying a dentine bonding agent to exposed dentine is a practical option to prevent further damage.

Adult↗

In vitro evaluation of abrasion of eroded enamel by different manual, power and sonic toothbrushes.

This study aimed to evaluate the susceptibility of eroded enamel to brushing abrasion performed by manual, power or sonic toothbrushes. Bovine enamel samples were subjected to 5 cycles, each consisting of 5 min demineralisation, 15 min remineralisation and 10 min brushing in a machine. Toothbrushing with the activated electric devices was supplemented with 20 linear strokes/min. Furthermore, enamel specimens were brushed with 20 linear strokes/min or 80 linear strokes/min with the electric toothbrushes without their individual operating action. A manual brush was applied at 100, 20 or 80 linear strokes/min. Specimens of the control group were not brushed after demineralisation. Loss of enamel was determined by profilometry. For all groups, substrate loss for linear brushing treatment applying 20 or 80 strokes/min did not differ significantly from the control (4.97 +/- 1.49 microm). Three power toothbrushing treatments significantly increased abrasion compared to linear brushing treatment with 20 or 80 strokes/min in their inactivated condition. The results indicate that brushing treatment with power or sonic toothbrushes may lead to significantly higher loss of demineralised enamel compared to toothbrushing without power or sonic support.

Animals↗

A critical review of non-carious cervical (wear) lesions and the role of abfraction, erosion, and abrasion.

The terms 'abfraction' and 'abrasion' describe the cause of lesions found along the cervical margins of teeth. Erosion, abrasion, and attrition have all been associated with their formation. Early research suggested that the cause of the V-shaped lesion was excessive horizontal toothbrushing. Abfraction is another possible etiology and involves occlusal stress, producing cervical cracks that predispose the surface to erosion and abrasion. This article critically reviews the literature on abrasion, erosion, and abrasion, and abfraction. The references were obtained by a MEDLINE search in March, 2005, and from this, hand searches were undertaken. From the literature, there is little evidence, apart from laboratory studies, to indicate that abfraction exists other than as a hypothetical component of cervical wear.

Dental Enamel↗

Susceptibility of acid-softened enamel to mechanical wear--ultrasonication versus toothbrushing abrasion.

The study aimed to compare the amounts of softened enamel removable by ultrasonication and by toothbrushing abrasion of briefly eroded samples. Thirty bovine enamel samples were demineralized in hydrochloric acid (pH 2.1) for 60 s and were then either brushed with 350 brushing strokes in toothpaste slurry (group A) or distilled water (group B) or were ultrasonicated for 120 s (group C). Enamel loss was measured after 10, 20, 50 and then after every 50 brushing strokes or after 5, 30, 60 and 120 s ultrasonication. Samples were indented with a Knoop diamond after erosion, and enamel loss due to abrasion or wear was calculated from the change in indentation depth after mechanical treatment. Within- and between-group comparisons were performed by ANOVA or t test. Initially, enamel loss increased with increasing brushing treatment or ultrasonication time. Enamel loss did not increase after 300 brushing strokes in group A (534 +/- 169 nm) or 250 brushing strokes in group B (423 +/- 80 nm), or after 60 s ultrasonication (231 +/- 72 nm). Enamel loss was significantly higher in groups A and B than in group C. The results confirm that ultrasonication removes only the outer, more highly demineralized part of the softened enamel layer. Results also indicate that toothbrushing abrasion removes more softened enamel from briefly eroded enamel than ultrasonication, and therefore probably removes partly demineralized enamel from the deeper part of the softened layer. In vivo, excessive toothbrushing might remove the softened enamel layer almost completely.

Animals↗

Abrasion and stain removal by different manual toothbrushes and brush actions: studies in vitro.

BACKGROUND AND AIMS: A limited amount of data using flat trim multitufted toothbrushes shows that abrasion of substrate surfaces by a standard toothpaste varies dependent on filament stiffness and configuration; soft brushes producing the most abrasion. The aims of these studies in vitro were to assess toothpaste abrasion of acrylic and stain removal by 5 proprietary medium toothbrushes with different head filament arrangements, and a prototype brush with rectangular filaments. The prototype brush had a medium texture in the long axis and soft texture at right angles to the long axis. MATERIAL AND METHOD: Optically clear acrylic was used as the substrate for abrasion by a standard toothpaste. Loss of substrate was determined by profilometry after 5000, 10000, 15000 and 20000 linear or rotary brushing actions. Stain removal was determined spectrophotometrically from optically clear acrylic specimens stained by chlorhexidine tea soaking sequences. Stained specimens were brushed with water using linear or rotary actions and measurements taken every 10 s to 60 s. RESULTS: Abrasion was progressive with increasing strokes and the pattern for each brush and brush action was to a first approximation linear. Overall, abrasion was significantly greater with linear compared to rotary action. Also overall brushes differed in the abrasion produced with both actions and particularly at greater exposure times. Within brush differences for the two motions were all significant by 20000 strokes except for the prototype brush. Stain removal was progressive over time with each brush but the pattern was non-linear. For the proprietary brushes the rotary motion removed less stain. For the prototype brush more stain was removed with the rotary action. Overall brushes differed significantly in stain removal within each motion and for each motion most differences between the proprietary and prototype brushes reached significance. CONCLUSIONS: The differences between brushes for both abrasion and stain removal must in large part relate to the filament contact area with the substrate surface. Whilst the model may not be predictive of clinical differences, it could find use to establish minimum criteria for toothbrush action.

Acrylic Resins↗

Restoration of Class V abrasions with a new light-cured glass ionomer restorative.

The clinical performance of conventional glass ionomer materials have demonstrated clinical success in Class V restorations, but the physical properties and limited aesthetics of these materials have limited their widespread utilization. This article describes the clinical application of a new Type II light-cured glass ionomer restorative material, demonstrating improved physical properties and aesthetics.

Dental Restoration, Permanent↗

Pilot study on dental erosion in a Norwegian electrolytic zinc factory.

In 12 workers in a Norwegian factory using electrolytic methods to extract zinc, a relationship was found to exist between degree of erosion, number of teeth affected and the length of service. The prevalence of caries, abrasion and attrition was not higher than in comparable population groups. The correlation between diagnosis of erosion based on clinical examination, and diagnosis based on evaluation of color slides was good.

Adult↗

[Dentition of the older animal].

Ageing is accompanied by the natural loss and wear of hard and soft dental tissues. While ageing can influence pathological processes affecting the dentition, it is not the cause of these processes. The development, growth, attrition, abrasion, and loss of teeth is determined in part by ageing. Periodontal disease is the result of the accumulation of dental plaque and can occur in young animals. Unfortunately, gingivitis or periodontitis is often not diagnosed or diagnosed too late by pet owners and veterinarians.

Aging↗

In vitro evaluation of novel low abrasive air polishing powders.

AIM OF THE STUDY: Though efficient in stain and plaque removal, air polishing is highly abrasive on root cementum or dentin even if working parameters are adjusted to minimize damage. As abrasiveness is also influenced by the physical properties of the powders used, the aim of the study was to evaluate the safety of novel low abrasive air polishing powders in vitro. MATERIAL AND METHODS: Using four novel air polishing powders (A, B, C and D) and a standard sodium bicarbonate (NaHCO3) powder, roots of 126 extracted teeth were air polished under standardized conditions at various working parameter combinations (distance: 2 mm, 4 mm and 6 mm; powder and water setting: low, medium and high) at an angulation of 90 degrees for 20 s. Instrumentation was performed in triplicate; resulting root defects were quantified laser-optically. RESULTS: Mean defect depths after application of powders A, B, C and D were significantly lower than with standard powder (A: 17.9 +/- 10.9 micro m, B: 48.2 +/- 32.7 micro m, C: 92.5 +/- 57.9 micro m, D: 33.9 +/- 19.6 micro m, NaHCO3: 163.1 +/- 71.1 micro m) (Kruskal-Wallis test). Among the experimental powders, D was transported most reliably in the air polishing unit and allowed complete removal of disclosed plaque as assessed on freshly extracted teeth. CONCLUSION: The novel air polishing powder D is of low abrasiveness to root cementum and dentin while being effective in removing dental plaque. Thus, it may be useful for safe and efficient plaque removal on exposed root surfaces.

Air↗

Effects of external bleaching on indentation and abrasion characteristics of human enamel in vitro.

The application of home-bleaching procedures as a means of lightening multiple teeth has become increasingly popular. Very few studies, however, have determined the effect of this treatment upon dental hard tissues. This in vitro study evaluated the effects of a 10% carbamide peroxide gel on the apparent fracture toughness, hardness, and abrasion characteristics of human enamel. The apparent fracture toughness of enamel was reduced by about 30% after bleaching for a period of 12 hours with no significant change in surface hardness. Enamel treated with the bleaching gels also exhibited a small but significant decrease in abrasion resistance. This behavior was most likely due to an alteration of the organic matrix of enamel under the chemical action of hydrogen peroxide. Further investigation of the clinical significance of this process is needed.

Analysis of Variance↗

Wear of enamel opposing low-fusing and conventional ceramic restorative materials.

PURPOSE: This study evaluated the wear area of human enamel opposing 2 conventional and 2 low-fusing dental porcelains, as well as abrasive wear, attrition, surface hardness, and fracture toughness for the 4 porcelain substrates. MATERIALS AND METHODS: Two low-fusing and 2 conventional metal-ceramic porcelains were used to form 15-mm-diameter disks (n = 10), which were fired according to manufacturer's recommendations. Enamel cusps (n = 40) were formed from extracted third molars. All ceramic and enamel specimens were finished to a 1000-grit silicon carbide surface. The Oregon Health Sciences University (Portland, OR) oral wear simulator was used to deliver a 20-N load from the cusps to the ceramic substrates through a food-like slurry. The sliding action of the cusps over an 8-mm linear path produced abrasive wear. A static 70-N load was applied at the end of the path to create attrition. This sequence was repeated at 1.0 Hz for 50,000 cycles. Ceramic wear was measured with a profilometer (+/-2 micrometers), and enamel wear was evaluated using optical scanning methods. After wear testing, the hardness and fracture toughness of the ceramic surfaces were determined, and scanning electron photomicrographs were made using representative ceramic and enamel specimens from each group. Enamel wear areas, abrasion and attrition depths, hardness, and fracture toughness values were subjected to analysis of variance and Tukey-Kramer post hoc tests to determine significant differences. RESULTS: Enamel wear was not significantly different for low-fusing and conventional porcelains (p =.29). The wear of conventional and low-fusing ceramic substrates was also not significantly different (p =.79). However, depth of porcelain wear caused by attrition was in general significantly greater than abrasive wear (p =.0004). Although no significant differences were found in the measured porcelain hardness values (p =.08), 1 conventional porcelain exhibited fracture toughness significantly greater than 1 low-fusing porcelain (p <.01). CONCLUSIONS: No differences in wear patterns were noted among low-fusing compared with conventional metal-ceramic porcelains, but static loading resulted in significantly greater attrition compared with the observed sliding abrasive wear. J Prosthodont 2001;10:8-15.

Analysis of Variance↗

Wedged cervical lesions produced by toothbrushing.

PURPOSE: To compare the morphology of experimentally induced cervical toothbrush abrasion lesions to teeth demonstrating non-carious cervical lesions in vivo. METHODS: Eighteen premolars extracted for orthodontic reasons were each subjected to 80 hours (1.4 million strokes) of horizontal brushing in a custom fabricated toothbrushing machine. Toothpaste slurry was applied continuously and specimens were subjected to 300 gms of toothbrushing force. Denture base resin was used to simulate gingival recession of 1 mm and a sulcus width of 0.1 mm. Cervical abrasions were analyzed by optical and scanning electron microscopy and classified as either V-shape/wedged vs. U-shape/rounded lesions. When lesions exhibited both shapes, they were classified as mixed. Shapes of experimentally induced lesions then were compared to naturally occurring ones found on extracted premolars. RESULTSts: Experimentally induced toothbrush abrasion duplicated the classical clinical shapes. Half (9/18) of the experimentally induced toothbrush abrasions exhibited wedged lesions, 28% (5/18) showed a mixed wedged/rounded lesion, and 22% (4/18) showed rounded lesions. Serial photography showed progression of the morphology of the lesions. Toothbrush abrasion apparently begins apical to the cemento-enamel junction, progresses to dentin, and then undermines enamel with loss of the original cemento-enamel junction. Wedged lesions may appear with the apex oriented coronal or apical, or may be symmetrical.

Bicuspid↗