Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “DUST”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47Linked to original sources

Levels of exposure to wood dust.

Surveys of exposure to inhalable dust have been carried out in two woodworking machine shops and five other woodworking shops where both manual and machine tool work is carried out. The Occupational Exposure Limits for wood dust were found to be frequently exceeded in some workshops. It is possible that the fraction of dust projected from woodworking machines towards the operator may have contributed both to measured dust concentrations and to exposure. Dust exposure may be reduced by careful attention to enclosure and ventilation, possibly using total enclosure at some machines. Emission of dust from portable orbital type sanding machines was considerably reduced by the use of low-volume high-velocity type extraction. It is suggested that suppliers of woodworking machines should provide data on dust emission to assist the user to manage better the introduction of new machines.

Air Pollutants, Occupational↗

Performance testing of three portable, direct-reading dust monitors.

Three portable direct-reading dust monitors were tested in a recirculating dust tunnel and a calm air dust chamber against a range of industrial dusts with different size distributions to investigate sources of variation in their responses. Responses were found to be linear compared to reference gravimetric respirable samplers over a range of concentrations for a particular particle size distribution. Their calibration factors were dependant on particle size, particle composition and air velocity. If particle size and air velocity do not change significantly then the calibration factor can be applied to the monitor readings to give an accurate measure of dust concentration. The DataRam and HAM, factory calibrated against respirable dust concentration, were found to agree closely, whereas the Microdust gave higher readings, having been factory calibrated against total suspended particulate concentration. The calibration of the DataRam was significantly altered by either contamination of the optics with dust or by cleaning the optics. This was not observed with either the Microdust or HAM, since both monitors include a reference calibration element.

Air Pollutants, Occupational↗

Respirable crystalline silica dust exposure during concrete finishing (grinding) using hand-held grinders in the construction industry.

Studies reporting the findings of exposure to crystalline silica dust during concrete finishing in construction settings are scarce due to the dynamic nature of the activity and the existence of many confounding factors. This study was initiated to explore the issue. A total of 49 personal respirable dust samples were collected during concrete finishing while workers used hand-held grinders. Only 15 (31%) of the grinders were equipped with local exhaust ventilation (LEV) systems. The confounding factors (e.g. wind velocity, wind direction, relative humidity and ambient temperature) were determined. To make the sampling task-specific, air sampling was activated only during actual grinding. Task-specific sampling times during each work shift ranged from 10 to 200 min. The concentration of total respirable particulate ranged from 0.34 to 81 mg/m3, with a mean +/- SD of 18.6 +/- 20.4 mg/m3, and the concentration of crystalline silica in the samples ranged from 0.02 to 7.1 mg/m3, with a mean +/- SD of 1.16 +/- 1.36 mg/m3. LEV on the grinders reduced the silica dust level significantly (P < 0.01) compared to grinders without LEV. Increased wind velocity also reduced the silica dust concentration significantly (P < 0.03). Working upwind reduced the exposure to silica dust compared to working downwind, but the difference was not statistically significant. The time-weighted average concentration of silica dust in 69% of the samples exceeded the current recommended threshold limit value of 0.05 mg/m3, indicating a strong need to devise methods for controlling workers' exposure to crystalline silica dust during concrete finishing activities.

Air Movements↗

Cellulosic building insulation versus mineral wool, fiberglass or perlite: installer's exposure by inhalation of fibers, dust, endotoxin and fire-retardant additives.

A task-specific exposure matrix was designed for workers installing building insulation materials. A priori, a matrix element was defined by type of task (installer or helper), type of work area (attic spaces or wall cavities) and type of insulation material (slabs from mineral wool, fiberglass or flax; loose-fill cellulosic material or perlite). In the laboratory a mock-up (full scale) of a one-family house was used for simulated installation of insulation materials (four replicates per matrix element). Personal exposure to dust and fibers was measured. The dust was analyzed for content of endotoxin and some trace elements (boron and aluminum) from fire-retardant or mold-resistant additives. Fibers were characterized as WHO fibers or non-WHO fibers. In support of the exposure matrix, the dustiness of all the materials was measured in a rotating drum tester. For installers in attic spaces, risk of exposure was low for inhalation of dust and WHO fibers from slab materials of mineral wool or fiberglass. Slab materials from flax may cause high risk of exposure to endotoxin. The risk of exposure by inhalation of dust from loose-fill materials was high for installers in attic spaces and for some of the materials risk of exposure was high for boron and aluminum. Exposure by inhalation of cellulosic WHO fibers was high but little is known about the health effects and a risk assessment is not possible. For the insulation of walls, the risk of installers' exposure by inhalation of dust and fibers was low for the slab materials, while a high risk was observed for loose-fill materials. The exposure to WHO fibers was positively correlated to the dust exposure. A dust level of 6.1 mg/m3 was shown to be useful as a proxy for screening exposure to WHO fibers in excess of 10(6) fibers/m3. In the rotating drum, slabs of insulation material from mineral wool or fiberglass were tested as not dusty. Cellulosic loose-fill materials were tested as very dusty, and perlite proved to be extremely dusty.

Aluminum Oxide↗

Modeling, estimation and validation of cotton dust and endotoxin exposures in Chinese textile operations.

In support of an epidemiological study of cancer incidence among cotton textile workers in Shanghai, PRC, historical estimates of exposure to cotton dust and endotoxin were developed for subjects drawn from a cohort of 267,400 female textile workers. A large dataset of historical cotton dust measurements were available from 56 of the study factories. Using these data, a series of models were developed to estimate cotton dust exposure by year, factory and process. Model estimates were validated by comparing with independently collected measurements gathered over a 15 year period and indicated a low relative bias (< 2%) and relative accuracy (+/- 61%). Endotoxin exposures were estimated using the endotoxin content of cotton dust by major processes obtained in five separate surveys in these factories. The validated exposures were assigned to the 7,242 jobs held by the 3,812 study subjects. Among the exposed workers, the mean cumulative exposure levels were 113.8 mg m(-3)*years for cotton dust and 6,707.7 EU m(-3)*years for endotoxin, respectively. The overall correlation among cotton dust and endotoxin exposures for these subjects was r = 0.58. Using an unusually rich set of historical cotton dust measurements, along with independently collected exposure measurements for validation and conversion to endotoxin levels, validated estimates of cumulative exposure were constructed for this large case-cohort study in the textile industry.

China↗

Small bakeries--a cross-sectional study of respiratory symptoms, sensitization and dust exposure.

This cross-sectional study investigated the prevalence of respiratory symptoms and sensitization to dust components in 224 individuals in 18 small bakeries in Scotland. Each work practice in the bakeries was characterized by an assessment of dust exposure and assigned to a category with either a direct exposure to flour dust of an indirect exposure to flour dust. We found that work-related respiratory symptoms were significantly associated with specific IgE to wheat flour and amylase but not to exposure category (except for nasal/eye symptoms). However, specific IgE to wheat flour was significantly associated with exposure category. There was a higher prevalence of immunological sensitization, reporting of work-related respiratory symptoms and exposure to dust than in other studies and of the 144 personal dust sample results taken, 21 (14.6%) of the total exceeded 10 mg/m3, the substantial dust concentration as outlined by the COSHH Regulations. Follow-up of those with work-related asthma symptoms (questionnaire response) was inconclusive of the work-relatedness of their symptoms, although it did confirm respiratory morbidity.

Adult↗

Damp housing and childhood respiratory symptoms: the role of sensitization to dust mites and molds.

In 1990, a case-control study was conducted in the Netherlands into the association between damp housing, childhood respiratory symptoms, and sensitization to house dust mites and mold allergens. In this study, 259 children with chronic respiratory symptoms and 257 control children were involved. Total serum immunoglobulin E (IgE) and specific IgE against house dust mites and a mixture of molds were determined. A visual inspection for signs of home dampness was performed in all homes. A questionnaire was given to the parents of the children to elicit information about the presence of signs of dampness in the previous 2 years and about risk factors for childhood respiratory disease. In the case group, 94 children had elevated serum IgE levels to house dust mites and 24 children to the mixture of molds. In the control group, house dust mite allergy was found in 31 children and mold allergy in two children. In a crude analysis, cases were slightly more likely to have been living in homes where damp or mold was reported or observed than were the controls. In cases as well as controls, home dampness was associated with increased sensitization to dust mites and molds. There was no relation between home dampness and case-control status after stratification for sensitization, however. Restriction of the analysis to cases with elevated serum IgE levels against dust mites and/or molds, and to controls without elevated serum IgE, increased the odds ratios, and several became significant at p < 0.05. This supports a connection between damp housing and sensitization to dust mites and/or molds and childhood respiratory symptoms.(ABSTRACT TRUNCATED AT 250 WORDS)

Allergens↗

Agricultural dust exposure and respiratory symptoms among California farm operators.

OBJECTIVE: To study whether dust exposure in California agriculture is a risk factor for respiratory symptoms. METHODS: A population-based survey of 1947 California farmers collected respiratory symptoms, occupational and personal exposures. Associations between dust and respiratory symptoms were assessed by logistic regression models. RESULTS: The prevalence of persistent wheeze was 8.6%, chronic bronchitis 3.8%, chronic cough 4.2%, and asthma 7.8%. Persistent wheeze was independently associated with dust in a dose-response fashion odds ratio, 1.2 (95% confidence interval[CI]=0.8-2.0) and 1.8 (95% CI=1.1-3.2) for low and high time in dust. A borderline significant association between chronic bronchitis and dust exposure was found. Asthma was associated with keeping livestock, but not with dust exposure. CONCLUSIONS: Occupational dust exposure among California farmers, only one third of whom tended animals, was independently associated with chronic respiratory symptoms.

Agricultural Workers' Diseases↗

Dust in the Earth system: the biogeochemical linking of land, air and sea.

Understanding the response of the Earth's climate system to anthropogenic perturbation has been a pressing priority for society since the late 1980s. However, recent years have seen a major paradigm shift in how such an understanding can be reached. Climate change demands analysis within an integrated 'Earth-system' framework, taken to encompass the suite of interacting physical, chemical, biological and human processes that, in transporting and transforming materials and energy, jointly determine the conditions for life on the whole planet. This is a highly complex system, characterized by multiple nonlinear responses and thresholds, with linkages often between apparently disparate components. The interconnected nature of the Earth system is wonderfully illustrated by the diverse roles played by atmospheric transport of mineral 'dust', particularly in its capacity as a key pathway for the delivery of nutrients essential to plant growth, not only on land, but perhaps more importantly, in the ocean. Dust therefore biogeochemically links land, air and sea. This paper reviews the biogeochemical role of mineral dust in the Earth system and its interaction with climate, and, in particular, the potential importance of both past and possible future changes in aeolian delivery of the micro-nutrient iron to the ocean. For instance, if, in the future, there was to be a widespread stabilization of soils for the purpose of carbon sequestration on land, a reduction in aeolian iron supply to the open ocean would occur. The resultant weakening of the oceanic carbon sink could potentially offset much of the carbon sequestered on land. In contrast, during glacial times, enhanced dust supply to the ocean could have 'fertilized' the biota and driven atmospheric CO(2) lower. Dust might even play an active role in driving climatic change; since changes in dust supply may affect climate, and changes in climate, in turn, influence dust, a 'feedback loop' is formed. Possible feedback mechanisms are identified, recognition of whose operation could be crucial to our understanding of major climatic transitions over the past few million years.

Carbon↗

Der p I concentrations in mattress surface and floor dust collected from infants' bedrooms.

BACKGROUND: Allergen exposure in early childhood is thought to be important for sensitization and subsequent development of asthma. Not much is known, however, about exposure of young children to allergens in the home. OBJECTIVES: This study was designed to document dust mite allergen exposure in young children, and to determine whether infants from atopic mothers (= 'high-risk' infants) are exposed to lower concentrations of house dust mite allergen than infants from non-atopic parents (= 'low-risk' infants). METHODS: Dust samples were taken in the homes of 104 infants (48 'high-risk' and 56 'low-risk' infants, selected by questionnaire) aged 3-15 months, from floors in different rooms and from the child's mattress surface. RESULTS: The majority of the infants were found to be exposed to Der p I concentrations of more than 2000 ng/g in dust collected from the surface of their mattresses. Lower Der p I concentrations were found in mattress surface dust from the beds of infants from atopic mothers than of infants from non-atopic parents. Also, lower Der p I concentrations were found in floor dust from the homes of infants from atopic mothers. Infant beds equipped with new mattresses, new blankets and top plastic sheeting had significantly lower Der p I concentrations than beds equipped with used mattresses and blankets, without top plastic sheeting. CONCLUSIONS: Young children in the Netherlands are exposed to significant concentrations of Der p I in mattress surface dust. Allergic parents appear to provide their children with environments somewhat less rich in mite allergen than non-allergic parents.

Allergens↗

Variability of house-dust-mite allergen levels within carpets.

Sensitization and exposure to house-dust-mite allergens is an important cause of asthma. Standardized, reliable, and reproducible methods for measuring exposure are essential for the assessment of the relationship between exposure, sensitization, and asthma. This study investigated the variability of the house-dust-mite allergen Der p 1 concentration in reservoir dust collected within whole carpets in living rooms and bedrooms. The carpets of nine bedrooms and 11 living rooms were sampled. Each room was divided into 1 m2 areas measured from wall to wall where the carpet was accessible. Reservoir dust samples were collected by vacuuming each 1 m2 area for 2 min. Der p 1 was assayed by a two-site monoclonal-antibody-based immunometric ELISA. Der p 1 was detectable in the carpets of all nine bedrooms and six of the 11 living rooms. Within these 15 rooms, there was a wide range of Der p 1 levels. The smallest range of allergen within a single room was 0.9 microgram Der p 1/g dust (0.2 and 1.1 micrograms/g; 5.5-fold difference), and the largest was 149.2 micrograms Der p 1/g dust (0.8 and 150 micrograms/g; 192-fold difference). The mean range of allergen levels in the living rooms was 11.5 micrograms Der p 1/g of dust, and the mean coefficient of variation of these rooms was 80.2%, illustrating the huge variation of mite allergen levels within each room. The variation within bedrooms was also large, with a mean coefficient of variation value of 88.7%. The coefficient of variation was significantly lower around soft furnishings or beds (57%) than in the rest of the room (89.3%), with the mean difference being 32% (95% CI 2-63%; P = 0.04). In conclusion, this study has shown that there is a great variation of Der p 1 levels between areas within a room. No consistent pattern of distribution of mite allergen within a room was found. Der p 1 levels in areas around soft furnishings and beds varied less than the levels in the rest of the room.

Allergens↗

Are house dust mite allergen levels influenced by cold winter weather?

BACKGROUND: Moisture is vitally important for house dust mites and they cannot survive in cold or hot-dry climates. AIMS OF THE STUDY: To investigate the influence of two extraordinarily cold and dry winters in 1995/1996 and 1996/1997 on house dust mite levels in German homes. METHODS: Dust samples were collected between June 1995 and December 2001 on the mattresses of 655 adults and 454 schoolchildren living in five different areas of Germany. We compared house dust mite allergen Dermatophagoides pteronyssinus (Der p 1) levels before and during the winters of 1995/1996 and 1996/1997 with levels after these winters. RESULTS: D. pteronyssinus (Der p 1) levels in samples taken after the cold winters of 1995/1996 and 1996/1997 were approximately two times lower than Der p 1 levels in dust samples collected before or during these respective winters (Geometric means: Erfurt 89 vs 33 ng/g; Hamburg 333 vs 219 ng/g; Bitterfeld, Hettstedt, and Zerbst 296 vs 180 ng/g). Except for Hamburg, the decrease in Der p 1 levels was statistically significant. D. pteronyssinus levels measured in dust samples collected in 2001 (i.e. 3 years after the two cold winters) show a statistically non-significant increase (Geometric means: Erfurt 33 vs 39 ng/g; Hamburg 219 vs 317 ng/g), suggesting that it may take a long time for mite allergen levels to increase again after a sudden decrease. CONCLUSION: We conclude that Der p 1 levels in German mattress dust samples have been approximately reduced by a factor of three to four by the two consecutive cold winters of 1995/1996 and 1996/1997.

Adult↗

Respiratory effects of experimental exposure to office dust.

UNLABELLED: The aim of this experiment was to test if healthy persons respond to exposures to normal office dust with objective or subjective effects in a dose-related way. If they did, the importance of their personal characteristics should be investigated. This paper presents the results related to respiratory effects caused by exposures to office dust. The experiment compared the responses of 24 healthy non-sensitive adult subjects with no known hyperreactivity to exposure to normal office dust in the air at 136 and 390 microg/m3 with their responses in clean air. The exposure duration was 5.25 h in a climate chamber under controlled conditions. The dust had no major identifiable specific reactive compounds. There were no direct effects of dust exposures on nasal lavages or rhinometry. The overall indications of the experiment are that healthy subjects without any hypersensitive reactions seem to respond to exposure to house dust without specific reactive components. The only effect indicated was on eosinophil cationic protein in nasal lavages and peak flow. A delayed effect on peak expiratory flow was observed the day after the exposure. Other effects were seen but in opposite direction of expectations. Several deviations from the original design of the experiment prevent any definitive conclusions from being made from these findings before they have been confirmed in future experiments to come. PRACTICAL IMPLICATIONS: Reflecting the exploratory status of the study its major implication is to point at possible future hypotheses. The study implies that office dust may have an effect on occupants' lung function even at concentrations found in normal indoor environments. The influences of a multitude of response modifying variables were tested but no consistent pattern was found. The study does therefore not identify a specific risk group but suggests that among normal non-sensitized subjects most of the traditional risk factors can be rejected as single responsible risk factor.

Adult↗

Comparison of two dust collection methods for reservoir indoor allergens and endotoxin on carpets and mattresses.

Variable methods of dust collection may lead to uncertainty in the measurement of biomarkers. The purpose of this study was to examine the effect of two different dust collection devices on dust weight, Der p 1, Fel d 1, and endotoxin levels. We compared: (1) a nylon mesh sock inserted between the furniture attachment and the vacuum hose (the reference method) and (2) the ALK device. Duplicate dust samples were collected for 2 min from 2 m(2) of 37 living room floors and from each longitudinal half of 37 mattresses. Measurement of Der p 1 and Fel d 1 were by double monoclonal antibody enzyme-linked immunosorbent assay (ELISA) and endotoxin by a Limulus Amobocyte Lysate assay. Geometric mean ratios (95% confidence intervals) were calculated to show the differences between sampling devices for each measurement. Compared with the ALK device, the reference method collected significantly more dust from floors (sevenfold) and mattresses (threefold) and more total Der p 1, Fel d 1, and endotoxin in both sites. Floor, but not mattress, Der p 1 concentrations were also significantly higher (threefold) using our reference method. We recommend that, in order to minimize sampling device bias, allergen and endotoxin are expressed as a concentration, and that the bed is considered the major source of allergen exposure. Practical Implications Dust sampling equipment can influence the dust yield. In order to have confidence in comparisons of allergen and endotoxin reservoir levels between centers, standardization in the use of sampling equipment is important.

Air Pollution, Indoor↗

Determination of microbial volatile organic compounds adsorbed on house dust particles and gypsum board using SPME/GC-MS.

UNLABELLED: Adsorption of microbial volatile organic compounds (MVOCs) on house dust was analyzed by performing solid phase microextraction (SPME) in combination with gas chromatography-mass spectrometry (GC-MS). Settled dust samples were exposed to five selected MVOCs and to cultures of the molds Stachybotrus chartarum, Aspergillus versicolor, and Chaetomium globosum. Considerable desorption of the MVOCs adsorbed on the dust occurred spontaneously within a few hours at room temperature and within several days or weeks after storage at -20 degrees or -80 degrees C. Similar results were found for a sample of a gypsum board cultivated with A. versicolor. SPME/GC-MS analysis performed immediately after sampling revealed several of the studied MVOCs on gypsum board and settled dust collected in a house garage with visible mold growth. MVOCs adsorbed on respirable particles of house dust can be inhaled and reach deep into the respiratory system, which may partly explain health effects that have been found to be associated with the presence of low concentrations of MVOCs in air. Particle-bound MVOCs can easily be detected by SPME/GC-MS analysis, thus this technique may prove to be very useful in indoor air research for identifying factors that affect human health. PRACTICAL IMPLICATIONS: We used SPME combined with GC-MS to study the adsorption and desorption of MVOCs on house dust particles that had been exposed to cultivated molds and molds in a damp building. Adsorbed MVOCs desorb spontaneously but this process can be slowed down by storing samples at -20 degrees or -80 degrees C. This opens up a possibility to apply SPME/GC-MS to reveal mold growth in buildings and to determine MVOCs in respirable dust particles that may reach deep in the respiratory system and lead to respiratory illnesses.

Air Microbiology↗

Ulysses dust measurements near Jupiter.

Submicrometer- to micrometer-sized particles were recorded by the Ulysses dust detector within 40 days of the Jupiter flyby. Nine impacts were recorded within 50 Jupiter radii with most of them recorded after closest approach. Three of these impacts are consistent with particles on prograde orbits around Jupiter and the rest are believed to have resulted from gravitationally focused interplanetary dust. From the ratio of the impact rate before the Jupiter flyby to the impact rate after the Jupiter flyby it is concluded that interplanetary dust particles at the distance of Jupiter move on mostly retrograde orbits. On 10 March 1992, Ulysses passed through an intense dust stream. The dust detector recorded 126 impacts within 26 hours. The stream particles were moving on highly inclined and apparently hyperbolic orbits with perihelion distances of >5 astronomical units. Interplanetary dust is lost rather quickly from the solar system through collisions and other mechanisms and must be almost continuously replenished to maintain observed abundances. Dust flux measurements, therefore, give evidence of the recent rates of production from sources such as comets, asteroids, and moons, as well as the possible presence of interstellar grains.

Dust↗

Occurrence of toxigenic Aspergillus versicolor isolates and sterigmatocystin in carpet dust from damp indoor environments.

Over the past decade, there has been growing concern regarding the role of toxigenic fungi in damp indoor environments; however, there is still a lack of field investigations on exposure to mycotoxins. The goal of our pilot study was to quantify the proportion of toxigenic Aspergillus versicolor isolates in native carpet dust from damp dwellings with mold problems and to determine whether sterigmatocystin can be detected in this matrix. Carpet dust samples (n = 11) contained from <2.5 x 10(1) to 3.6 x 10(5) (median, 3.1 x 10(4)) A. versicolor CFU/g of dust, and the median proportion of A. versicolor from total culturable fungi was 18%. Based on thin-layer chromatography detection of sterigmatocystin, 49 of 50 A. versicolor isolates (98%) were found to be toxigenic in vitro. By using high-performance liquid chromatography-electrospray ionization tandem mass spectrometry, sterigmatocystin could be detected in low concentrations (2 to 4 ng/g of dust) in 2 of 11 native carpet dust samples. From this preliminary study, we conclude that most strains of A. versicolor isolated from carpet dust are able to produce sterigmatocystin in vitro and that sterigmatocystin may occasionally occur in carpet dust from damp indoor environments. Further research and systematic field investigation are needed to confirm our results and to provide an understanding of the health implications of mycotoxins in indoor environments.

Air Pollution, Indoor↗

A cross sectional study of the respiratory health of workers handling printing toner dust.

BACKGROUND: Although recent case reports have suggested possible respiratory effects of solid toner dust inhalation, this hypothesis has not been verified by epidemiological studies. OBJECTIVES: To conduct a cross sectional study to evaluate the association between the biological indices of lung fibrosis and toner dust exposure in an occupational cohort handling solid toner dust in their work life. METHODS: A total of 600 male toner workers and 212 control subjects were surveyed in terms of their subjective respiratory symptoms, pulmonary functions, and chest radiographic findings. In addition to the exposure history, the current working conditions and personal exposure levels to toner dust were also examined. RESULTS: Although subjects handling toner for more than 20 years tended to show a higher prevalence of respiratory symptoms and minimal chest x ray abnormalities, there was no consistent relation between the exposure to toner dust and the biological responses of the respiratory system. CONCLUSION: Deterioration of respiratory health related to toner dust exposure is less likely to occur in current well controlled work environments, especially if the powdered toner is handled carefully. Nonetheless, it is important to collect further epidemiological evidence on the biological effects of toner dust inhalation, preferably using a longitudinal study design.

Adult↗