Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Biofilms”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 847 records · Page 47Linked to original sources

Is there a role for quorum sensing signals in bacterial biofilms?

Bacteria form multicellular biofilm communities on most surfaces. Genetic analysis of biofilm formation has led to the proposal that extracellular signals and quorum-sensing regulatory systems are essential for differentiated biofilms. Although such a model fits the concept of density-driven cell-cell communication and appear to describe biofilm development in several bacterial species and conditions, biofilm formation is multifactorial and complex. Hydrodynamics, nutrient load and intracellular carbon flux have major impacts, presumably by altering the expression of cellular traits essential for bacterial adaptation during the different stages of biofilm formation. Hence, differentiated biofilms may also be the net result of many independent interactions, rather than being determined by a particular global quorum sensing system.

Bacterial Physiological Phenomena↗

Growth dilution of metals in microalgal biofilms.

Despite the key role microalgae play in introducing toxicants into aquatic food webs, little is known about the effects of environmental factors on metal accumulation by these primary producers. Environmental factors such as light and nutrients alter growth rates and may consequently influence metal concentrations in microalgae through growth dilution. Laboratory experiments suggested that metal uptake and elimination by microalgal biofilms were gradual enough to enable dilution of metals within the biofilms by photosynthetically accrued carbon, and a simple kinetic model of metal accumulation predicted significant variation in metal content due to growth dilution over the natural range of microalgal growth rates. The ratio of metal uptake to carbon uptake by microalgal biofilms decreased exponentially with increasing light in short-term laboratory experiments because photosynthesis was much more sensitive to a light gradient than was metal uptake. The effect of light on biofilm metal concentrations was confirmed in situ with a long-term experiment in which experimental shading of biofilms in a metal-contaminated stream decreased biofilm growth rates and caused a 3x increase in biofilm concentrations of twelve metals, including methylmercury. Slow growth at the primary producer level is a likely contributor to higher biotic metal concentrations in shaded, oligotrophic, or cold ecosystems.

Biofilms↗

Modelling the growth of a methanotrophic biofilm: estimation of parameters and variability.

This article discusses the growth of methanotrophic biofilms. Several independent biofilm growths scenarios involving different inocula were examined. Biofilm growth, substrate removal and product formation were monitored throughout the experiments. Based on the oxygen consumption it was concluded that heterotrophs and nitrifiers co-existed with methanotrophs in the biofilm. Heterotrophic biomass grew on soluble polymers formed by the hydrolysis of dead biomass entrapped in the biofilm. Nitrifier populations developed because of the presence of ammonia in the mineral medium. Based on these experimental results, the computer program AQUASIM was used to develop a biological model involving methanotrophs, heterotrophs and nitrifiers. The modelling of six independent growth experiments showed that stoichiometric and kinetic parameters were within the same order of magnitude. Parameter estimation yielded an average maximum growth rate for methanotrophs, micron, of 1.5 +/- 0.5 d-1, at 20 degrees C, a decay rate, bm, of 0.24 +/- 0.1 d-1, a half saturation constant, KS(CH4), of 0.06 +/- 0.05 mg CH4/L, and a yield coefficient, YCH4, of 0.57 +/- 0.04 g X/g CH4. In addition, a sensitivity analysis was performed on this model. It indicated that the most influential parameters were those related to the biofilm (i.e. density; solid-volume fraction; thickness). This suggests that in order to improve the model, further research regarding the biofilm structure and composition is needed.

Biodegradation, Environmental↗

Extracellular polysaccharides do not inhibit the reaction between Streptococcus mutans and its specific immunoglobulin G (IgG) or penetration of the IgG through S. mutans biofilm.

The present study investigated whether extracellular polysaccharides inhibit reaction between Streptococcus mutans and its specific immunoglobulin G (IgG) and penetration of the IgG through S. mutans biofilm. The planktonic organisms with or without extracellular polysaccharides were prepared, incubated with rabbit IgG against whole cell of S. mutans and fluorescein isothiocyanate (FITC)-conjugated goat affinity purified antibody to rabbit IgG. Biofilms with or without extracellular polysaccharides were formed on cover glasses and incubated with rabbit IgG against S. mutans and FITC-conjugated goat antibody to rabbit IgG. Then, biofilms were stained with propidium iodide. The amount of specific IgG binding on S. mutans was determined by FITC intensity with a fluorescence microplate reader. The penetration of IgG through biofilms was determined by confocal laser scanning microscopy. The results showed that the fluorescence intensity of FITC in planktonic organisms with extracellular polysaccharides was similar to that in planktonic organisms without extracellular polysaccharides, indicating that extracellular polysaccharides did not inhibit the reaction between S. mutans and its specific IgG. Although biofilms of S. mutans with extracellular polysaccharides were much thicker and denser than those without extracellular polysaccharides, the speed with which IgG penetrated through both of the biofilms did not differ significantly, suggesting that penetration of IgG through S. mutans biofilm was not affected by extracellular polysaccharides.

Animals↗

Susceptibility of Porphyromonas gingivalis in biofilms to amoxicillin, doxycycline and metronidazole.

The susceptibility of Porphyromonas gingivalis to amoxicillin, doxycycline and metronidazole was determined by a standardized method taking into account the biofilm mode of growth of subgingival bacteria. The minimal inhibitory concentration (MIC) and minimal bactericidal concentration (MBC) of 48-h biofilms of P. gingivalis established on membrane filters in a Modified Robbins Device were determined by agar dilution. The results were compared to (i) conventional MIC determinations, (ii) the susceptibility of planktonic cultures with cell numbers equal to those of the biofilms, and (iii) results for detached biofilm cells. The MICs of the biofilms of the six reference strains and clinical isolates containing 107-8 cells/filter were much higher than the conventional MIC values. However, the MIC of planktonic cultures of equal cell numbers also increased, indicating that an inoculum effect is part of the explanation of the increased resistance of biofilms. Still, the MBCs of biofilms were 2-8 times, and those for doxycycline up to 64 times, greater than the MBC values for planktonic cultures.

Amoxicillin↗

Contributions of microbial biofilms to ecosystem processes in stream mesocosms.

In many aquatic ecosystems, most microbes live in matrix-enclosed biofilms and contribute substantially to energy flow and nutrient cycling. Little is known, however, about the coupling of structure and dynamics of these biofilms to ecosystem function. Here we show that microbial biofilms changed the physical and chemical microhabitat and contributed to ecosystem processes in 30-m-long stream mesocosms. Biofilm growth increased hydrodynamic transient storage-streamwater detained in quiescent zones, which is a major physical template for ecological processes in streams-by 300% and the retention of suspended particles by 120%. In addition, by enhancing the relative uptake of organic molecules of lower bioavailability, the interplay of biofilm microarchitecture and mass transfer changed their downstream linkage. As living zones of transient storage, biofilms bring hydrodynamic retention and biochemical processing into close spatial proximity and influence biogeochemical processes and patterns in streams. Thus, biofilms are highly efficient and successful ecological communities that may also contribute to the influence that headwater streams have on rivers, estuaries and even oceans through longitudinal linkages of local biogeochemical and hydrodynamic processes.

Arabinose↗

Structure and on-site formation of biofilms in paper machine water flow.

Paper machine biofilms formed in situ on stainless steel surfaces were studied. A robust flow cell was fitted to side stream (1.8 m s(-1)) of the spray water circuit of a paper machine. This on-site tool allowed for assessing the efficacy of antifoulants and the adequacy of steel polishing under mill conditions. A rapid fluorescence-based assay was developed to quantify the biomass of shallow biofilms on machine steel. The fluorescence matched the ATP content measured for the same biofilms. Electrolytic polishing reduced the tendency of biofouling of 500 grit surface steel. Biofilm grew under machine conditions as clusters on the steels, showing uniformly coccoid, filaments or short rods; only one cell type in each cluster. The biofilm clusters excluded latex beads of 0.02 microm with hydrophilic or with hydrophobic surfaces from penetrating more than three to four layers of cells. Under the high hydraulic flow at the machine (1.8 m s(-1)), the biofilm grew in 7 days 6-10 microm thick. The high flow rate guided the shape of the biofilm clusters emerging after the primary attachment of cells. Adhered individual bacteria were the platform on steel to which solids such as paper machine fines then accumulated.

Bacterial Adhesion↗

Recalcitrance of Streptococcus mutans biofilms towards detergent-stimulated detachment.

The biofilm mode of growth protects the plaque microorganisms against environmental attacks, such as from antimicrobials or detergents. Detergents have a demonstrated ability to detach initially adhering bacteria from enamel surfaces, but the ability of detergent components to detach plaque bacteria is not always obvious from in vivo experiments and reports on their clinical efficacy are inconsistent. It is likely that antimicrobials or detergents are unable to penetrate the plaque and reach the bacteria that actually link the plaque mass to the substratum surface. Attenuated total reflectance/Fourier transform infrared spectroscopy was used to measure the transport of sodium lauryl sulphate (SLS) through Streptococcus mutans HG 985 biofilms. The transport of SLS to the base of the S. mutans biofilms was not hindered, while moreover an accumulation of SLS near the base of the biofilms was found, suggesting that SLS was adsorbed to biofilm components. X-ray photoelectron spectroscopy confirmed the ability of S. mutans, grown on sucrose supplemented medium, to adsorb SLS, and simultaneously indicated that exposure of cells to SLS might lead to a loss of surface proteins. Furthermore, experiments in a parallel-plate flow chamber demonstrated that initially adhering S. mutans HG 985 could be stimulated to detach by SLS, but that, depending on the growth stage of the biofilm, only maximally 27% of biofilm bacteria could be stimulated to detach by a 4% (w/v) SLS solution.

Adsorption↗

Surface-catalysed disinfection of thick Pseudomonas aeruginosa biofilms.

Transition metal catalysts were incorporated into polymers which formed the surface for bacterial attachment and biofilm formation in a constant depth film fermenter (100 microns thickness), flow chamber (about 30 microns thickness) and in batch culture (< 30 microns thickness). The catalysts drive the breakdown of persulphates to reactive oxygen species. When Pseudomonas aeruginosa biofilms were exposed to dilute solutions of potassium monopersulphate (20 micrograms ml-1-1 mg ml-1), significant enhancement of killing was notable for catalyst-containing surfaces over that of controls. The degree of enhancement was greatest for thin films, but was nevertheless significant for the 100 microns thick biofilms. Fluorescence probes and viability staining, in conjunction with laser confocal microscopy, showed that reactive species were generated at the biofilm-substratum interface and killed the biofilm from the inside. Reaction-diffusion limitation now concentrates the active species within the biofilm rather than protecting it, and a diffusion bump is established whereby further treatment agent is drawn to the substratum enabling relatively thick biofilms to be disinfected.

Biofilms↗

Biofilm formation by Helicobacter pylori.

Helicobacter pylori NCTC 11637 produces a water-insoluble biofilm when grown under defined conditions with a high carbon:nitrogen ratio in continuous culture and in 10% strength Brucella broth supplemented with 3 g l-1 glucose. Biofilm accumulated at the air/liquid interface of the culture. Light microscopy of frozen sections of the biofilm material showed few bacterial cells in the mass of the biofilm. The material stained with periodic acid Schiff's reagent. Fucose, glucose, galactose, and glycero-manno-heptose, N-acetylglucosamine and N-acetylmuramic acid were identified in partially purified and in crude material, using gas chromatography and mass spectrometry. The sugar composition strongly indicates the presence of a polysaccharide as a component of the biofilm material. Antibodies (IgG) to partially purified material were found in both sero-positive and sero-negative individuals. Treatment of the biofilm material with periodic acid reduced or abolished immunoreactivity. Treatment with 5 mol l-1 urea at 100 degrees C and with phenol did not remove antigenic recognition by patient sera. The production of a water-insoluble biofilm by H. pylori may be important in enhancing resistance to host defence factors and antibiotics, and in microenvironmental pH homeostasis facilitating the growth and survival of H. pylori in vivo.

Amino Acids↗

The growth and resistance to sodium hypochlorite of Listeria monocytogenes in a steady-state multispecies biofilm.

A constant-depth film fermenter (CDFF) was used to culture a steady-state multispecies biofilm consisting of one strain each of Listeria monocytogenes, Pseudomonas fragi and Staphylococcus xylosus. These bacteria were initially grown together in a conventional chemostat to achieve a steady state before being inoculated into the CDFF over an 18-h period. A dilute tryptone soya broth (TSB) medium was supplied to the CDFF and the biofilm allowed to develop over a 28-d period. This mature biofilm was then subjected to increasing levels of sodium hypochlorite solution to measure any antimicrobial effect. The three organisms were seen to reach a steady state after 6 d in the chemostat before being transferred to the CDFF where the mature multispecies biofilm reached steady state at 17 d. Listeria monocytogenes in both planktonic and biofilm growth stabilized at 1. 8 and 1.5%, respectively, of the total plate counts, while Ps. fragi and Staph. xylosus were the predominant organisms in the biofilm at 59% and 39.5%, respectively, of the total microbial population. Steady-state biofilms in the CDFF were exposed to increasing strengths of sodium hypochlorite; 200, 500 and 1000 p.p.m. free chlorine, but a substantial two-log cycle drop in bacterial numbers was only achieved at 1000 p.p.m. free chlorine. In planktonic culture all three organisms were completely eliminated when exposed to 10 p.p.m. free chlorine for a 30-s period.

Biofilms↗

Differential efficacy of a chlorine dioxide-containing sanitizer against single species and binary biofilms of a dairy-associated Bacillus cereus and a Pseudomonas fluorescens isolate.

AIMS: Daily exposure to 100 p.p.m. chlorine dioxide of single species and binary biofilms of dairy-associated Bacillus cereus DL5 and Pseudomonas fluorescens M2, attached to stainless steel surfaces in a laboratory flow system, was studied. METHODS AND RESULTS: Surfaces were sampled daily before and after sanitizer treatment and cells and spores dislodged and enumerated by standard methods. Duplicate surfaces were prepared for confocal scanning laser microscopy (CSLM) and scanning electron microscopy. Higher counts of Ps. fluorescens M2 were obtained in single species biofilms, microcolonies stained green (viable) in CSLM images and were closely packed on attachment surfaces. By contrast, higher counts of B. cereus DL5 were obtained in binary biofilms, microcolonies stained green in CSLM images, but were more spread out. Lower spore counts were obtained for B. cereus DL5 in binary biofilms. The survival of Ps. fluorescens M2 cells after exposure to chlorine dioxide was apparently enhanced by the presence of B. cereus DL5 in binary biofilms. By contrast, B. cereus DL5 showed increased susceptibility to sanitizer treatment in the presence of Ps. fluorescens M2. CONCLUSIONS: Co-cultured bacteria in biofilms influence each other with respect to attachment capabilities and sanitizer resistance/susceptibility. SIGNIFICANCE AND IMPACT OF THE STUDY: Binary biofilms endemic in food-processing industries can survive sanitation regimes and may represent reservoirs of product contamination leading to subsequent spoilage and/or food safety risks.

Animals↗

The influence of the chemical composition of drinking water on cuprosolvency by biofilm bacteria.

AIMS: This study investigated the influence of water chemistry on copper solvation (cuprosolvency) by pure culture biofilms of heterotrophic bacteria isolated from copper plumbing. METHODS AND RESULTS: Heterotrophic bacteria isolated from copper plumbing biofilms including Acidovorax delafieldii, Flavobacterium sp., Corynebacterium sp., Pseudomonas sp. and Stenotrophomonas maltophilia were used in laboratory coupon experiments to assess their potential for cuprosolvency. Sterile copper coupons were exposed to pure cultures of bacteria to allow biofilm formation and suspended in drinking waters with different chemical compositions. Sterile coupons not exposed to bacteria were used as controls. After 5 days of incubation, copper release and biofilm accumulation was quantified. The results demonstrated that cuprosolvency in the control experiments was influenced by water pH, total organic carbon (TOC) and conductivity. Cuprosolvency in the presence of biofilms correlated with the chemical composition of the water supplies particularly pH, Langeliers Index, chloride, alkalinity, TOC and soluble phosphate concentrations. CONCLUSIONS: The results suggest water quality may influence cuprosolvency by biofilms present within copper plumbing pipes. SIGNIFICANCE AND IMPACT OF THE STUDY: The potential for water chemistry to influence cuprosolvency by biofilms may contribute to the sporadic nature of copper corrosion problems in distribution systems.

Bacteria↗

Biofilm formation and cell-to-cell signalling in Gram-negative bacteria isolated from a food processing environment.

AIMS: To investigate the biofilm-forming capacity and the production of quorum signals in Gram-negative bacteria isolated from a food production environment, and the possible correlation between both phenotypes. METHODS AND RESULTS: Sixty-eight Gram-negative bacteria were isolated from equipment and working surfaces in a raw vegetable processing line, and tested for biofilm-forming capacity using an in vitro microplate assay. All isolates showed significantly higher biofilm-forming capacity than Escherichia coli laboratory strain DH5alpha, which was included as a negative control, and differed up to 56-fold in relative biofilm-forming capacity. Various assays based on reporter bacteria were used to detect quorum signals produced by the isolates. Twenty-six isolates produced autoinducer-2, five isolates produced N-acyl-homoserine lactones (AHLs), and none produced the Pseudomonas quinolone signal. CONCLUSIONS: No correlation was found between in vitro biofilm-forming capacity and production of quorum signalling molecules among the 68 strains isolated from the raw vegetable processing line. SIGNIFICANCE AND IMPACT OF THE STUDY: Several recent studies have shown a role of AHL-based quorum sensing in biofilm formation of specific Gram-negative bacterial strains. The current work shows that production of AHL and other quorum signals is not widespread in Gram-negative isolates from a raw vegetable processing line, and is not a general requirement for biofilm formation, at least in vitro.

4-Butyrolactone↗

Positive role of peptidoglycan breaks in lactococcal biofilm formation.

Bacterial attachment to solid matrices depends on adhesive molecules present on the cell surface. Here we establish a positive correlation between peptidoglycan (PG) breaks, rather than particular molecules, and biofilm-forming capacity in the Gram-positive bacterium Lactococcus lactis. The L. lactis acmA strain, which is defective in PG hydrolase, adhered less efficiently than the wild-type (wt) strain to different solid surfaces and was unable to form biofilms. These phenotypes were abolished by addition of lysozyme, a PG hydrolytic enzyme. Thus, the presence of PG breaks introduced by PG hydrolase, and not the AcmA protein itself, appears to be responsible for biofilm formation. Two different genetic screens confirmed the importance of PG breaks in L. lactis biofilm formation. Using the chain-forming ability of the acmA strain as a phenotypic indicator of PG integrity, we selected for insertional mutants generating short chains. Five independent mutants were all mapped to ponA, which encodes the PG synthesis enzyme PBP1A. Double acmA ponA mutants displayed increased adhesion and biofilm-forming capacity. Direct selection for strains with increased biofilm-forming capacity resulted in the isolation of another five mutations in ponA. Based on these results, we conclude that PG breaks are important for both adhesion and biofilm formation in L. lactis.

Bacterial Adhesion↗

Involvement of bacterial migration in the development of complex multicellular structures in Pseudomonas aeruginosa biofilms.

Detailed knowledge of the developmental process from single cells scattered on a surface to complex multicellular biofilm structures is essential in order to create strategies to control biofilm development. In order to study bacterial migration patterns during Pseudomonas aeruginosa biofilm development, we have performed an investigation with time-lapse confocal laser scanning microscopy of biofilms formed by various combinations of colour-coded P. aeruginosa wild type and motility mutants. We show that mushroom-shaped multicellular structures in P. aeruginosa biofilms can form in a sequential process involving a non-motile bacterial subpopulation and a migrating bacterial subpopulation. The non-motile bacteria form the mushroom stalks by growth in certain foci of the biofilm. The migrating bacteria form the mushroom caps by climbing the stalks and aggregating on the tops in a process which is driven by type-IV pili. These results lead to a new model for biofilm formation by P. aeruginosa.

Biofilms↗

Quorum sensing controls biofilm formation in Vibrio cholerae.

Multiple quorum-sensing circuits function in parallel to control virulence and biofilm formation in Vibrio cholerae. In contrast to other bacterial pathogens that induce virulence factor production and/or biofilm formation at high cell density in the presence of quorum-sensing autoinducers, V. cholerae represses these behaviours at high cell density. Consistent with this, we show here that V. cholerae strains 'locked' in the regulatory state mimicking low cell density are enhanced for biofilm production whereas mutants 'locked' in the regulatory state mimicking high cell density are incapable of producing biofilms. The quorum-sensing cascade we have identified in V. cholerae regulates the transcription of genes involved in exopolysaccharide production (EPS), and variants that produce EPS and form biofilms arise at high frequency from non-EPS, non-biofilm producing strains. Our data show that spontaneous mutation of the transcriptional regulator hapR is responsible for this effect. Several toxigenic strains of V. cholerae possess a naturally occurring frameshift mutation in hapR. Thus, the distinct environments occupied by this aquatic pathogen presumably include niches where cell-cell communication is crucial, as well as ones where loss of quorum sensing via hapR mutation confers a selective advantage. Bacterial biofilms could represent a complex habitat where such differentiation occurs.

Bacterial Proteins↗

Effects of modified pellicles on Candida biofilm formation on acrylic surfaces.

The role of saliva or serum proteins, such as mucin, fibronectin (FN) and mannan-binding protein, on Candida biofilm formation was investigated. Supplementation of saliva with FN had no significant effect on biofilm formation. In contrast, biofilm formation on either mucin-coated or FN-coated acrylic surfaces was significantly less than that of the control. These results suggest that salivary mucin or FN alone does not facilitate biofilm formation of Candida. Supplementation of serum with FN increased biofilm formation of C. glabrata compared with the control. Pretreatment of serum with anti-FN monoclonal antibody significantly reduced biofilm formation, as did pretreatment of serum with anti-mannan-binding protein monoclonal antibody or Con-A. Therefore, Candida biofilm formation on acrylic surfaces appears to be a complex phenomenon involving a multiplicity of proteins operating intraorally.

Acrylates↗