Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Negative Staining”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46Linked to original sources
PubMed1977

ATPase activities, Ca2+ transport and phosphoprotein formation in sarcoplasmic reticulum subfractions of fast and slow rabbit muscles.

Subfractionation of sarcoplasmic reticulum from fast-twitch and slow-twitch rabbit skeletal muscles was performed on a sucrose density gradient. Vesicle fractions were characterized by: measurement of (Ca2+,Mg2+)-dependent (extra) ATPase, Mg2+-dependent (basal) ATPase, Ca2+ uptake characteristics, polypeptide patterns in sodium dodecylsulphate polyacrylamide gel electrophoreses, phosphoprotein formation and electronmicroscopy of negatively stained samples. In fast-twitch muscle, low and high density vesicles were separated. The latter showed high activity of (Ca2+,Mg2+)-dependent ATPase, negligible activity of Mg2+-dependent ATPase, high initial rate and high capacity of Ca2+ uptake, high amount of phosphorylated 115000-Mr polypeptide, and appeared morphologically as thin-walled vesicles covered with particles of 4 nm in diameter. Low density vesicles had little (Ca2+,Mg2+)-dependent ATPase but high Mg2+-dependent ATPase. Although the initial rate of Ca2+ uptake was markedly lower, the total capacity of uptake was comparable with that of high density vesicles. Phosphorylated 115000-Mr polypeptide was detectable at low concentrations. Instead, 57000 and 47000-Mr polypeptides were characterized as forming stable phosphoproteins in the presence of ATP and Mg2+. Negatively stained, these vesicles appeared to have smooth surfaces. It is suggested that low density vesicles represent a Ca2+ sequestering system different from that of high density vesicles and that Mg2+-dependent (basal) ATPase as well as the 57000 and 47000-Mr polypeptides are part of the Ca2+ transport system within the low density vesicles. According to the results from slow-twitch muscle, Ca2+ sequestration by the sarcoplasmic reticulum functions in this muscle type only through the low density vesicles.

Adenosine Triphosphatases↗
PubMedDate not supplied

Surface topography of microtubule walls decorated with monomeric and dimeric kinesin constructs.

The surface topography of opened-up microtubule walls (sheets) decorated with monomeric and dimeric kinesin motor domains was investigated by freeze-drying and unidirectional metal shadowing. Electron microscopy of surface-shadowed specimens produces images with a high signal/noise ratio, which enable a direct observation of surface features below 2 nm detail. Here we investigate the inner and outer surface of microtubules and tubulin sheets with and without decoration by kinesin motor domains. Tubulin sheets are flattened walls of microtubules, keeping lateral protofilament contacts intact. Surface shadowing reveals the following features: (i) when the microtubule outside is exposed the surface relief is dominated by the bound motor domains. Monomeric motor constructs generate a strong 8 nm periodicity, corresponding to the binding of one motor domain per alpha-beta-tubulin heterodimer. This surface periodicity largely disappears when dimeric kinesin motor domains are used for decoration, even though it is still visible in negatively stained or frozen hydrated specimens. This could be explained by disorder in the binding of the second (loosely tethered) kinesin head, and/or disorder in the coiled-coil tail. (ii) Both surfaces of undecorated sheets or microtubules, as well as the inner surface of decorated sheets, reveal a strong 4 nm repeat (due to the periodicity of tubulin monomers) and a weak 8 nm repeat (due to slight differences between alpha- and beta-tubulin). The differences between alpha- and beta-tubulin on the inner surface are stronger than expected from cryo-electron microscopy of unstained microtubules, indicating the existence of tubulin subdomain-specific surface properties that reflect the surface corrugation and hence metal deposition during evaporation. The 16 nm periodicity visible in some negatively stained specimens (caused by the pairing of cooperatively bound kinesin dimers) is not detected by surface shadowing.

Freeze Drying↗
PubMed1970

Structural properties and features of parasitic Bdellovibrio bacteriovorus.

The structure of five parasitic strains of Bdellovibrio bacteriovorus was studied by electron microscope after negative staining and in shadow-case and etched freeze-fractured preparations. Special attention was paid to the cell wall and the flagellar sheath which is continuous with the wall or part of it. These structural components reveal distinct features which are induced by certain staining substances; they are exceedingly susceptible to disruption by physical treatments, and in old cells often appear impaired. In freeze-fractured cells the wall shows characteristic fracturing tendencies not known in other microorganisms. These structural properties and features are distinct to Bdellovibrio wall and flagellar sheath, the structural integrity of which is a fundamental requirement for the infectivity and survival of this organism. The anterior end of Bdellovibrio is differentiated: 6 to 12 ring-like structures (9 to 12 nm, outer diameter) are built into its wall and several fibers (7 to 10 nm wide, up to 1.5 mum long) emerge from it. Intracellular structures, which are revealed as compact oval bodies bulging from the cell border and have internal laminated organization, are characteristic of Bdellovibrio after negative staining with certain compounds. These findings on the structure of parasitic Bdellovibrio substantiate previous observations indicating the uniqueness of this organism and add criteria for the identification of this genus.

Bacteria↗
PubMed1982

Ultrastructure of the Na, K-ion pump.

Na, K-ATPase has been analysed by electron microscopy to obtain information about the structure of the enzyme and its organization within the membrane. Following negative staining the membrane-bound enzyme was observed as surface particles which on the basis of their size and frequency and the enzymatic and chemical composition of the membranes are interpreted as protomers (alpha beta-units). Freeze-fracture electron microscopy revealed the enzyme as intramembrane particles. Quantitative electron microscope studies suggested that the intramembrane particles are oligomers of the protein unit that forms the surface particles. Following reconstitution of the enzyme into phospholipid vesicles it was demonstrated that similar intramembrane particles represent a protein unit which transports sodium and potassium. Vanadate and magnesium induced the formation of two-dimensional crystals in the membrane fragments of the purified Na, K-ATPase. Further information regarding the shape and dimensions of the protomer was obtained through analysis of electron micrographs of negatively stained crystals with optical diffraction and image reconstruction methods.

Animals↗
PubMed1988

Visualization of the large heparan sulfate proteoglycan from basement membrane.

Kleinschmidt spreading, negative staining, and rotary shadowing were used to examine the large form of (basement membrane) heparan sulfate proteoglycan in the electron microscope. Heparan sulfate proteoglycan was visualized as consisting of two parts: the core protein and, emerging from one end of the core protein, the glycosaminoglycan side chains. The core protein usually appeared as an S-shaped rod with about six globules along its length. Similar characteristics were observed in preparations of core protein in which the side chains had been removed by heparitinase treatment ("400-kDa core") as well as in a 200-kDa trypsin fragment ("P200") derived from one end of the core protein. The core protein was sensitive to lyophilization and apparently also to the method of examination, being condensed following Kleinschmidt spreading (length means = 52 nm) and extended following negative staining (length means = 83 nm) or rotary shadowing (length means = 87 nm; 400-kDa core length means = 80 nm; P200 length means = 44 nm). Two or three glycosaminoglycan side chains (length means = 146 +/- 53 nm) were attached to one end of the core protein. The side chains often appeared tangled or to merge together as one. Thus, the large heparan sulfate proteoglycan from basement membrane is an asymmetrical molecule with a core protein containing globular domains and terminally attached side chains. This structure is in keeping with that previously predicted by enzymatic digestions and with the proposed orientation in basement membranes, i.e., the core protein bound in the lamina densa and the heparan sulfate side chains in the lamina lucida arranged along the surface of the basement membranes.

Animals↗
PubMed1982

Electron microscopic visualization of the tetrodotoxin-binding protein from Electrophorus electricus.

Preparations of highly purified tetrodotoxin-binding protein (sodium channel) from the electric organ of the eel Electrophorus electricus were examined in negatively stained preparations. Structures observed in preparations exhibiting the highest tetrodotoxin binding tended to aggregate into ordered clusters with a unique ribbon-like conformation. The individual particles of these aggregates are elongated or rod-shaped, approximately 40 A wide and 170 A long. Stereoscopic imaging of the three-dimensional aspects of the structures revealed that the rod-like image is not an edge view of a flattened disc but represents a cylindrical structure. Individual rods in nonclustered forms were also observed but with greater frequency in preparations with lower specific activity. The dimensions of the particles suggest that they represent a protein core formed by perhaps one copy of the large glycopeptide previously identified as being part of the sodium channel. The structure of the sodium channel component visualized by negative staining is discussed in the context of the excitable properties it contributes to biological membranes.

Animals↗
PubMed2006

Influence of saline and pH on collagen type I fibrillogenesis in vitro: fibril polymorphism and colloidal gold labelling.

We have produced different collagen type I fibrils by in vitro fibrillogenesis of acetic acid-soluble collagen within the pH range 2.5-9.0, in the presence and absence of 150 mM NaCl. The varying relatively stable molecular assemblies and polymorphic fibrillar end-products produced after 24 h incubation have been assessed and compared by the TEM study of specimens negatively stained with uranyl acetate. In the presence of 150 mM NaCl, the assembly of collagen at low pH (2.5) leads to the formation of initial molecular aggregates that progressively link together at slightly higher pH (5.0) to form sub-fibrils and spindle-shaped D-banded bundles of sub-fibrils. At pH 6.0 these D-banded bundles aggregate into larger spindle-shaped fibrils with lateral misalignment of the D-banding across the bundle. However, at pH 7.0 and 8.0, in the presence of 150 mM NaCl, the characteristic parallel-sided mature D-banded collagen type I fibres are formed. At pH 9.0 more loosely formed parallel-sided D-banded collagen fibrils are present, within which the spindle-shaped sub-fibrils can be defined by negative staining more convincingly than at pH 7-8. In the presence of 50 mM buffer at pH 2.5, but absence of 150 mM NaCl, collagen type I forms disorganized periodic initial molecular aggregates, which have a tendency to link together to form sub-fibrils. Flexuous collagen type I sub-fibrils predominate at pH 5.0, alongside large spindle-shaped fibrils that possess a regular transverse approximately 10 nm periodicity, with an oblique approximately 67 nm periodicity, significantly different to the D-banding periodicity. At pH 7.0 and pH 8 in the absence of saline loosely-formed flexuous and spindle-shaped fibres co-exist, with underlying sub-fibrils visible, but at pH 9.0 only disorganized flexuous fibrillar aggregates are present. Colloidal gold labelling of the characteristic D-banded collagen type I fibrils with 5 nm and 2 nm chemically reactive gold particles reveals a periodic labelling pattern, which is not apparent with 10 nm and 15 nm gold particles, due to steric hindrance. The flexuous and spindle-shaped collagen fibrils also bind 2 nm gold particles in a specific manner. In all cases, the specific chemisorption of gold onto the collagen fibrils is probably determined by the availability of repeating amino acid side chains of the collagen molecules along the fibril surface. The controlled production of varying stable collagen type I fibrillogenesis products is likely to be of value within numerous areas of biotechnology, biology and medicine, including experimental biomineralization.

Animals↗
PubMed1967

Ultrastructure of the cell wall of Bacillus polymyxa.

The macromolecular arrangement on the surface of Bacillus polymyxa was revealed by metal shadowing of whole cells and wall fragments; it consisted of a rectangular array of 70-A globules with a repeating interval of 100 A. The substructure was studied in plan with phosphotungstic acid (pH 6) or uranyl acetate as negative stains of fragments and was studied also in profile with sections of embedded material. Staining of sections of cells fixed with glutaraldehyde showed that layering (approx. 80-A dense, 40-A light, and 120-A dense layers, outermost layer first) could be demonstrated in the cell wall with lead or uranyl acetate, used together or separately. The outer "dense" layer corresponded to the regularly arrayed structure (RS); it was removed by guanidine hydrochloride, sodium lauryl sulfate, cold formamide, and by trypsin. The RS layer (isolated by a hydrogen bond breaking reagent, guanidine hydrochloride) was disrupted by agents such as sodium lauryl sulfate or damaged by 3 m sodium chloride. Qualitative chemical tests, ultraviolet absorption, and removal by trypsin indicated that the structured layer consisted mainly of protein, but exact characterization was not attempted. The globular units making up the layer consisted of a small number of subunits, imperfectly resolved by negative staining. The underlying polysaccharide appeared to be covalently bound to the deepest (probably mucopeptide) layer since it required "hot" formamide for its removal. A survey of species was not made.

Bacillus↗
PubMed1984

Structure of Limulus and other invertebrate thick filaments.

We have demonstrated remarkable similarity among the skeletal muscles of chelicerate arthropods with respect to the cross-bridge arrangement on the surface of their thick filaments. The latter, gently isolated from the muscles of three representative species (Limulus telson , tarantula leg and scorpion leg and tail) have been examined by electron microscopy and optical diffraction using both negatively stained and unidirectionally metal shadowed preparations. The filaments are highly periodic and produce clear and detailed diffraction patterns. The cross-bridge projections form integral surface helices, with an axial spacing of 14.5 nm between adjacent crowns and a major axial repeat every 43.5 nm. We have demonstrated previously that Limulus filaments are four-stranded and analysis of both electron micrographs and their transforms, as well as optical reconstructions of the arachnid filaments is consistent with their also having a four-start surface helix, which is right-handed in all cases. Of all those examined, thus far, only Limulus thick filaments have been demonstrated to change length under various conditions. Shortened Limulus filaments isolated from K+-stimulated fibers retain the 43.5 nm axial repeat periodicity and 14.5 nm axial spacing between crowns. In preliminary analysis of negatively stained and metal shadowed preparations, we see no systematic change with respect to screw or rotational symmetry in short as compared with long filaments. A few of the former have a very slightly increased diameter (3-4 nm) in the middle of each filament arm. This region often shows disorder on optical transforms. From our results we cannot rule out the possibility that disaggregation and reaggregation of thick filament proteins accompany the changes in length of Limulus thick filaments.

Animals↗
PubMed1988

Size distribution of ferret luteal cells during pregnancy.

Steroidogenic cells in the corpus luteum of the ferret (Mustela putorius) during early (Days 6 and 13) to midpregnancy (Day 24) were characterized using electron microscopy, immunocytochemical localization of neurophysin, and smears of dispersed cells obtained by dissociating luteal cells with collagenase. The latter were stained for 3 beta-hydroxysteroid dehydrogenase (3 beta-HSD) activity, and the diameters of the cells were determined with an ocular micrometer. Very small cells (less than 12 microns) stained negative for 3 beta-HSD, occurred in clumps of 5-50 cells, and were presumed to be primarily endothelial cells. 3 beta-HSD-positive cells covered a wide spectrum of sizes ranging from 14 to 56 microns and did not exist as two discrete populations. The ratio of small (less than 25 microns) to large (greater than 25 microns) cells was 1.86:1.0 on Day 6, with the 17- to 20-microns cell size class predominating. On the day of implantation (Day 13), about 75% of the cells ranged from 26 to 50 microns, with the 29-microns size predominating. By Day 24, the ratio of small-to-large cells had declined to 0.15. Nearly 90% of the cells were in the 26- to 56-microns range, the predominant size being 35 microns. All size classes of luteal cells stained negative for neurophysin on all 3 days of pregnancy studied. Luteal cells obtained on Days 6, 13, and 24 of pregnancy failed to reveal any evidence of mitosis after in vivo or in vitro colchicine treatment. We interpret these results as indicating that the 3 beta-HSD-positive luteal cells of ferrets progressively increase in size as small luteal cells complete their differentiation from granulosa cells and ultimately form larger luteal cells with somewhat different ultrastructural characteristics.

Animals↗
PubMed1992

Caldesmon binds to smooth muscle myosin and myosin rod and crosslinks thick filaments to actin filaments.

It is well established that caldesmon binds to actin (Kb = 10(7) - 10(-8) M-1) and to tropomyosin (Kb = 10(6) M-1) and that it is a potent inhibitor of actomyosin ATPase. Caldesmon can also bind tightly to myosin. We investigated the binding of smooth muscle and nonmuscle caldesmon isoforms (CDh and CDl respectively) to myosin using proteins from sheep aorta. Both caldesmon isoforms bind to myosin with indistinguishable affinity. The affinity is about 10(6) M-1 in low salt buffer, but is weakened by increasing [KCl] reaching 10(5) M-1 in 100 mM KCl. The stoichiometry of binding is about three caldesmon per myosin molecule. Stoichiometry and affinity are not dependent on whether myosin is phosphorylated nor on the presence of Mg2+ and ATP, provided the ionic strength is maintained constant. The caldesmon binding site of smooth muscle myosin is located in the S-2 region, consequently both HMM and myosin rod bind to caldesmon. Over a range of conditions myosin and myosin rod binding to caldesmon were indistinguishable. Skeletal muscle myosin has no caldesmon binding site. Smooth muscle myosin rods form side-polar filaments in low salt buffer in which the backbone packing of LMM into the filament shaft is clearly visible in negatively-stained electron microscopic images. Sometimes the S-2 portions can be seen 'frayed' from the filament shaft. When caldesmon is bound the filament shaft appears to be about 20% thicker and the frayed effect is dramatically increased; long filamentous 'whiskers' are often seen curving out from the filament shaft. Similar structures are observed with smooth muscle and with non-muscle caldesmon. Myosin also binds to caldesmon when it is incorporated into the thin filament; however, this interaction is qualitatively different. Measurements of smooth muscle HMM binding to native thin filaments in the presence of 3 mM MgATP shows there is a high affinity binding (Kb = 10(6) M-1) which is independent of [Ca2+] and of the level of myosin phosphorylation. The stoichiometry is one HMM molecule per actin monomer which is equivalent to up to 14 HMM bound at high affinity per caldesmon. Negatively stained electron microscopic images of the HMM.ADP.Pi-thin filament complex have failed to show any attachment of HMM to the thin filaments. When rod filaments are added to actin plus caldesmon or to native thin filaments the rod filaments are strongly associated with the actin filament bundles. The majority of rod filaments are lined up parallel and in close proximity to actin filaments.(ABSTRACT TRUNCATED AT 400 WORDS)

Actin Cytoskeleton↗
PubMed1975

Correlation between twitching motility and possession of polar fimbriae in Acinetobacter calcoaceticus.

Negatively stained preparations of 16 strains of Acinetobacter calcoaceticus were examined in the electron microscope. Five of the strains did and 11 of the strains did not exhibit twitching motility. Two of the non-twitching strains were substrains of twitching wild-type strains. All twitching strains were found to possess fimbriae with a diameter of approximately 50 A. These fimbriae were shown to be of polar origin except in one strain where, for technical reasons, the origin could not be determined with certainty. Polar fimbriae could not be demonstrated in any of the strains that did not exhibit twitching motility. The demonstration of polar fimbriae was only regularly possible during the exponential growth phase, presumably because the fimbriae are shed by the bacteria during later growth phases. During the study, methods were developed for securing exponentially growing bacteria in concentrations suited for the preparation of negatively stained cells for electron microscopy. Peritrichously arranged fimbriae with a diameter of approximately 30 A were demonstrated in nearly all strains studied, especially on cells in late growth phases. The occurrence of this kind of fimbriae was therefore not correlated with the occurrence of twitching motility.

Acinetobacter↗
PubMed1974

Superficial macromolecular arrays on the cell wall of Spirillum putridiconchylium.

Electron microscopy of the cell envelope of Spirillum putridiconchylium, using negatively stained, thin-sectioned, and replicated freeze-etched preparations, showed two superficial wall layers forming a complex macromolecular pattern on the external surface. The outer structured layer was a linear array of particles overlying an inner tetragonal array of larger subunits. They were associated in a very regular fashion, and the complex was bonded to the outer, pitted surface of the lipopolysaccharide tripartite layer of the cell wall. The relationship of the components of the two structured layers was resolved with the aid of optical diffraction, combined with image filtering and reconstruction and linear and rotary integration techniques. The outer structural layer consisted of spherical 1.5-nm units set in double lines determined by the size and arrangement of 6- by 3-nm inner structural layer subunits, which bore one outer structural layer unit on each outer corner. The total effect of this arrangement was a double-ridged linear structure that was evident in surface replicas and negatively stained fragments of the whole wall. The packing of these units was not square but skewed by 2 degrees off the perpendicular so that the "unit array" described by optical diffraction and linear integration appeared to be a deformed tetragon. The verity of the model was checked by using a photographically reduced image to produce an optical diffraction pattern for comparison with that of the actual layers. The correspondence was nearly perfect.

Cell Wall↗
PubMed1991

Extraction of extendable beaded structures and their identification as fibrillin-containing extracellular matrix microfibrils.

High molecular weight aggregates were extracted from human amnion using buffers containing 6 M guanidine hydrochloride. Rotary shadowed preparations and negatively stained samples examined by electron microscopy showed that each aggregate appeared to be a string of globular structures joined by fine filaments, giving the appearance of beads on a string. The periodicity of the beads was variable. A mouse monoclonal antibody directed against a previously characterized pepsin fragment of fibrillin was used with gold-conjugated secondary antibody and immunoelectron microscopy to show that the aggregates contained fibrillin. Similar structures were found in non-denaturing homogenates of skin, tongue, ligament, ciliary zonule, cartilage, and vitreous humor. When immunogold-labeled beaded structures were prepared for electron microscopy in the same manner as tissue, the beaded structures could no longer be seen. Instead, gold-labeled microfibrils were found which appeared to be the same as the fibrillin-containing matrix microfibrils observed in connective tissues and often associated with elastin. Thus, standard TEM protocols including fixation, dehydration, and embedding alter the ultrastructural appearance of microfibrils as compared with negative stain or rotary shadowing techniques. When skin was stretched and prepared for electron microscopy while still under tension, beaded filaments were seen in the tissue sections, but were not visible in non-stretched controls. In addition, when stretched ligament was immunolabeled with antibody directed against fibrillin while still under tension, the periodicity of antibodies along the microfibrils increased compared with non-stretched controls. We propose that microfibrils contain globular structures connected by fine filaments composed at lease in part of highly ordered, periodically distributed fibrillin molecules, whose periodicity is subject to change dependent on the tensional forces applied to the tissue in which they are contained.

Actin Cytoskeleton↗
PubMed1972

Lumenal plasma membrane of the urinary bladder. I. Three-dimensional reconstruction from freeze-etch images.

To determine the three-dimensional structure of the lumenal membrane of transitional epithelium, a study was made of sectioned, negatively stained, and freeze-etched specimens from intact epithelium and membrane fractions from rabbit urinary bladder. Particulate membrane components are confined to plaque regions within which the unit membrane is asymmetric, having a thicker outer leaflet. Transversely fractured freeze-etched plaques display a thick ( approximately 80 A), particulate lumenal leaflet and a thin ( approximately 40 A) cytoplasmic one. Four different faces of the two leaflets can be distinguished: two complementary, split, inner membrane faces exposed by freeze-cleaving the bilayer and two external (lumenal and cytoplasmic) membrane surfaces revealed by deep-etching. On the split, inner face of the lumenal leaflet appear polygonal plaques of hexagonally arranged particles. These fit into holes observed on the complementary, split, innerface of the cytoplasmic leaflet. The particles, which have a center-to-center spacing of approximately 160 A, also seem to protrude from the external surface of the lumenal leaflet, where their subunits ( approximately 50 A in diameter) are revealed by freeze-etching and negative staining. The plaques are separated from each other by smooth-surfaced regions, which cleave like simple lipid bilayers. Since the array of plaque particles covers only approximately 73% of the membrane surface area, whereas 27% is taken up by particle-free interplaque regions, the presence of particles cannot in itself entirely account for the permeability barrier of the lumenal membrane. Although no particles are observed protruding from the cytoplasmic surface of the membrane, cytoplasmic filaments are attached to it by short, cross-bridge-like filaments that seem to contact the particles within the membrane. These long cytoplasmic filaments cross-link adjacent plaques. Therefore, we suggest that at least one function of the particles is to serve as anchoring sites for cytoplasmic filaments, which limit the expansion of the lumenal membrane during distention of the bladder, thereby preventing it from rupturing. The particle-free interplaque regions probably function as hinge areas between the stiff plaques, allowing the membrane to fold up when the bladder is contracted.

Animals↗
PubMed1973

Low resistance junctions in crayfish. I. Two arrays of globules in junctional membranes.

Low resistance junctions between axons of crayfish ganglia are studied by freeze-fracture and negative staining. In freeze-fracture, fracture planes that go through a junctional membrane expose two faces, both internal, called face A and face B. Face A belongs to the internal membrane leaflet and faces the gap. Face B belongs to the external membrane leaflet and faces the axoplasm. Face A displays pits, 60-100 A in diameter, arranged in a hexagonal array with a unit cell of approximately 200 A. An approximately 25 A bump is frequently seen at the center of each pit. Some pits are occupied by a globule approximately 125 A in diameter, which displays a central depression approximately 25 A in size. Face B contains globules also arranged in a fairly regular hexagonal pattern. The center-to-center distance between adjacent globules is most frequently approximately 200 A; however, occasionally certain globules are seen separated by a distance as short as approximately 125 A. The top surface of the globules occasionally displays a starlike profile and seems to contain a central depression approximately 25 A in diameter. In negatively stained preparations of membranes from the nerve cord, two types of membranes are seen containing a fairly regular pattern. In one, globules approximately 95 A in diameter form a hexagonal close packing with a unit cell of approximately 95 A. In the other, globules of the same size are organized in a larger hexagonal array with a unit cell of approximately 155 A (swollen arrangement). Some of the globules forming the swollen arrangement are seen containing six subunits. The six subunits form a hexagon which is skewed with respect to the main rows of hexagons in such a way that the subunits lie on rows which make an angle of approximately 37 degrees with the main rows.

Animals↗
PubMed1982

Absence of microtubule sliding and an analysis of spindle formation and elongation in isolated mitotic spindles from the yeast Saccharomyces cerevisiae.

Mitotic spindles were isolated from a cell division cycle mutant of the budding yeast Saccharomyces cerevisiae by the lysis of sphateroplasts on an air:buffer interface and were negatively stained with 1% gold thioglucose. Isolated spindles were incubated under conditions which promoted the sliding disintegration of parallel preparations of Tetrahymena axonemes, namely the addition of ATP to 20 microM. In no experiment was a corresponding change in microtubule organization of the spindle observed even when spindles were first pretreated with either 1-10 microgram/ml trypsin or 0.2-2% Triton X-100. During these experiments a number of spindles were isolated from cells that had passed through the imposed temperature block, and from the images obtained a detailed model of spindle formation and elongation has been constructed. Two sets of microtubules, one from each spindle pole body (SPB), completely interdigitate to form a continuous bundle, and a series of discontinuous microtubules are then nucleated by each SPB. As the spindle elongates, the number of microtubules continuous between the two SPBs decreases until, at a length of 4 micrometer, only one remains. The spindle, composed of only one microtubule, continues to elongate until it reaches the maximal nuclear dimension of 8 micrometer. The data obtained from negatively stained preparations have been verified in thin sections of wild-type cells. We suggest that, as in the later stages of mitosis only one microtubule is involved in the separation of the spindle poles, the microtubular spindle in S. cerevisiae is not a force-generating system but rather acts as a regulatory mechanism controlling the rate of separation.

Cell Cycle↗
PubMed1975

Isolation and characterization of acetylcholinesterase and other particulate proteins in the hemolymph of Aplysia californica.

Hemolymph of the marine mollusc, Aplysia californica, contains four large particles: acetylcholinesterase, hemocyanin, a hemagglutinin, and a structure tentatively identified as erythrocurorin. We purified the acetylcholinesterase 20-fold by differential centrifugation and filtration through a column of 4% agarose. The freshly isolated esterase complex was found to have a sedimentation coefficient of 69, but the negatively stained enzyme lacked a definite structure in the electron microscope, and appeared as irregular aggregates of a 60 A subunit. The complex was unstable below pH 5 or during storage at 7 degrees. Under these conditions, enzymatic activity remained essentially unchanged. Treatment of the purified enzyme with trichloroacetic acid, organic solvents, and sodium dodecyl sulfate broke the complex down into two major subunits with molecular weights of about 70,000. Exposure of the enzyme to [3H]diisopropylfluorophosphate resulted in the labeling of one of these subunits. Although similar in specificity, the cholinesterase of the blood differed from the enzyme in Aplysia nervous tissue, which is associated with membrane. Treatment with sodium deoxycholate activated the membrane-associated enzyme but inhibited slightly that of the hemolymph; tyrocidine inhibited the hemolymph enzyme but not the enzyme of nervous tissue; and mild digestion with trypsin released the membrane-bound enzyme in an active, soluble form, but inactivated the enzyme of hemolymph. The other particulates of Aplysia hemolymph were partially characterized. Aplysia hemocyanin was similar in structure to other molluscan hemocyanins. When negatively stained, the unit particle appeared to be a disc with a diameter of 280 A and a width of 45 A. These discs were stacked to form long cylindrical arrays. The purified hemocyanin was found to contain 0.26% copper (dry weight). Using differential centrifugation and gel filtration we also obtained a 9-fold purification of Aplysia hemagglutinin. This particle was 120 A in diameter with a dark staining central core of 40 A consisting of 6 subunits. The particle tentatively identified as erythrocurorin appeared as a structure 200 A in diameter consisting of 5 V-shaped subunits.

Acetylcholinesterase↗