Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “CASTS”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 829 records · Page 46Linked to original sources
PubMed2003

Electrochemical characterization of cast titanium alloys.

A reaction layer forms on cast titanium alloy surfaces due to the reaction of the molten metal with the investment. This surface layer may affect the corrosion of the alloy in the oral environment. The objective of this study was to characterize the in vitro corrosion behavior of cast titanium alloys. ASTM Grade 2 CP titanium, Ti-6Al-4V, Ti-6Al-7Nb and Ti-13Nb-13Zr alloys were cast into a MgO-based investment. Experiments were performed on castings (N=4) with three surface conditions: (A) as-cast surface after sandblasting, (B) polished surface after removal of the reaction layer, and (C) sandblasted surface after removal of the reaction layer. Open-circuit potential (OCP) measurement, linear polarization, and potentiodynamic cathodic polarization were performed in aerated (air+10% CO(2)) modified Tani-Zucchi synthetic saliva at 37 degrees C. Potentiodynamic anodic polarization was subsequently conducted in the same medium deaerated with N(2)+10% CO(2) gas 2 h before and during the experiment. Polarization resistance (R(P)) and corrosion rate (I(CORR)) were calculated. Numerical results were subjected to nonparametric statistical analysis at alpha=0.05. The OCP stabilized for all the specimens after 6 x 10(4)s. Apparent differences in anodic polarization were observed among the different surfaces for all the metals. A passivation region followed by breakdown and repassivation were seen on specimens with surfaces A and C. An extensive passive region was observed on all the metals with surface B. The Kruskal-Wallis test showed no significant differences in OCP, R(p), I(CORR) or break down potential for each of the three surfaces among all the metals. The Mann-Whitney test showed significantly lower R(P) and higher I(CORR) values for surface C compared to the other surfaces. Results indicate that the surface condition has more effect on corrosion of these alloys than the surface reaction layer. Within the oxidation potential range of the oral cavity, all the metal/surface combinations examined showed excellent corrosion resistance.

Alloys↗
PubMed1983

Hair casts: classification, staining characteristics, and differential diagnosis.

Considerable confusion exists in the literature regarding hair casts. A variety of different disorders have been grouped and reported as if they were a single entity. This nonspecificity in terminology accounts for the vast discrepancy in their reported incidence, size, configuration, etc. A specific classification for hair casts is proposed to clarify the situation. This article presents a practical staining technic, which readily differentiates peripilar keratin casts from other hair disorders. Clinical and microscopic characteristics of peripilar keratin casts and peripilar nonkeratin casts are illustrated.

Adult↗
PubMed1991

Events in the Cardiac Arrhythmia Suppression Trial (CAST): mortality in the entire population enrolled.

To test the hypothesis that suppression of ventricular arrhythmias by antiarrhythmic drugs after myocardial infarction improves survival, the Cardiac Arrhythmia Suppression Trial (CAST) was initiated. Suppression was evaluated before randomization during an open label titration period. Patients whose arrhythmias were suppressed were randomized in the main study and those whose arrhythmias were partially suppressed were randomized in a substudy. Overall survival and survival free of arrhythmic death or cardiac arrest were lower [corrected] in patients treated with encainide or flecainide than in patients treated with placebo. However, the death rate in patients randomized to placebo therapy was lower than expected. This report describes the survival experience of all patients enrolled in CAST and compares it with mortality in other studies of patients with ventricular arrhythmias after myocardial infarction. As of April 18, 1989, 2,371 patients had enrolled in CAST and entered prerandomization, open label titration: 1,913 (81%) were randomized to double-blind, placebo-controlled therapy (1,775 patients whose arrhythmias were suppressed and 138 patients whose arrhythmias were partially suppressed during open label titration); and 458 patients (19%) were not randomized because they were still in titration, had died during titration or had withdrawn. Including all patients who enrolled in CAST, the actuarial (Kaplan-Meier) estimate of 1-year mortality was 10.3%. To estimate the "natural" mortality rate of patients enrolled in CAST, an analysis was done that adjusted for deaths that might be attributable to encainide or flecainide treatment either during prerandomization, open label drug titration or after randomization. Because the censoring procedure excluded patients treated with encainide or flecainide after randomization, the mortality estimate will be less than the unadjusted mortality estimate of 10.3%.(ABSTRACT TRUNCATED AT 250 WORDS)

Anilides↗
PubMedDate not supplied

Representation of molecular configurations by CAST coding method.

A configurational CAST (CAnonical representation of STereochemistry) coding method, which represents relative and absolute configuration, is described. The configurational CAST codes are constructed by canonical rotation of the dihedral angles of the input structure before the CAST codes are assigned. Using the configurational CAST, configurational differences can be distinguished independently of conformational differences. Representation of enantiomers is also achieved by a mirror image conversion method. The CAST representation shows the distinctive characteristics of several diastereomers and conformers that were examined. The method clearly represents the differences in configurations. Applications to organic molecules having complex stereochemistry are also demonstrated.

Journal Article↗
PubMed2000

Tensile properties and transformation temperatures of Pd added Ti-Ni alloy dental castings.

The effect of palladium (Pd) addition to Ti-Ni alloy as the third element was investigated to improve the super-elasticity of the alloy castings at body temperature for dental application. Ti-50.8Ni (at %) alloy, which exhibited super-elasticity at 310 K in castings, was used for comparison. 5.0, 7.5, 10.0 and 15.0 at % Pd was added to Ti-50.0Ni alloy by the substitution for Ni. The change in the proportion of Ti and Ni was also examined at the fixed Pd addition of 7.5 at %. The properties of the alloys were investigated in tensile test and differential scanning calorimetry (DSC). Ti-42.5Ni-7.5Pd alloy castings showed good super-elasticity among the examined alloys from the viewpoint of residual strain and elongation. Moreover, apparent proof stress could be changeable by the proportion of Ti and Ni with residual strain being kept low. Ti-42.5Ni-7.5Pd alloy castings exhibited better super-elastic flexibility than Ti-50.8Ni alloy, which is proven by lower apparent proof stress and larger elongation. This flexibility appears to be caused by its relatively high martensitic transformation starting temperature point. It is suggested that this flexibility with super-elasticity could widen the clinical application of the alloy casting in dentistry.

Journal Article↗
PubMed1999

PVC as a sensor membrane material: influence of solvent casting variables.

Unplasticized polyvinyl chloride (PVC) has proved an especially difficult membrane material to form reproducibly. In its fabrication for sensor use, variable temperature solvent casting has been assessed and related to function as external membranes of a classical dual membrane amperometric oxidase electrode. The thermal history of the casting solution was shown to have an effect on both thickness and the permeability. With increasing temperature of the cast solution (4-37 degrees C) membrane thicknesses increased (5-30 microm). Amperometric responses to catechol and hydrogen peroxide decreased with increasing casting solution temperature whereas responses to ascorbate remained unchanged. These properties are tentatively attributed to the formation of discrete layers through differential changes in the rate of solvent evaporation. Scanning electron microscopy revealed distinct microstructure zones supporting this proposition and attesting to the need to factor in environmental temperature during casting.

Journal Article↗
PubMedDate not supplied

Bioactive response of Ag-doped tape cast Bioglass 45S5 following heat treatment.

The suitability of Bioglass 45S5 to the tape casting process and the ability of the glass to retain in vitro bioactivity following heat treatment to increase strength has been established. In this research, tape cast Bioglass was doped with silver prior to heat treatment in an effort to impart antimicrobial properties. The effect of initial dopant concentration and processing temperature was investigated. FTIR confirmed the presence of well established hydroxyapatite (HA) surface layers on Ag-doped tape cast Bioglass following heat treatment and simulated body fluid (SBF) immersion. Solution analysis revealed the release of silver ion in concentrations similar to those reported in the literature to have antimicrobial effects. Additionally, mercury porosimetry was used to determine that silver enhanced the densification process relative to that of undoped tape cast Bioglass. Ag-doped tape cast and sintered Bioglass (TCSBG) appears promising for use in situations requiring rapid surface HA formation and antimicrobial properties.

Journal Article↗
PubMed2002

Fatigue studies of high-palladium dental casting alloys: Part I. Fatigue limits and fracture characteristics.

The fatigue limits and fracture characteristics for a Pd-Cu-Ga alloy and a Pd-Ga alloy were studied. The alloys were cast into tensile test bars with gauge diameter of 3 mm and gauge length of 15 mm, and the surfaces of the castings were neither air-abraded nor polished after removal from the investment. Specimens were prepared from all-new metal (not previously melted), a combination of 50% new metal and 50% old metal (previously melted one time) and 100% old metal. The cast bars were subjected to heat treatment simulating the complete firing cycles for dental porcelain, and fatigued in air at room temperature under uniaxial tension-compression stress at 10 Hz and a ratio of tensile stress amplitude to compressive stress amplitude (R-ratio) of -1. The alloy microstructures and fracture surfaces were examined with a scanning electron microscope (SEM). Results showed that the fatigue limits at 2 x 10(6)cycles of the Pd-Cu-Ga and Pd-Ga alloys were approximately 0.20 and 0.15 of their 0.1% yield strength (YS) in tension, respectively. The fatigue resistance for specimens from both alloys containing 50% old metal and 50% new metal was comparable to that of specimens containing all-new metal, although this decreased dramatically for Pd-Cu-Ga alloy specimens containing all-old metal. The fatigue resistance of the Pd-Cu-Ga alloy subjected to heat treatment simulating the porcelain firing cycles was not adversely affected by remnants of the original as-cast dendritic microstructure that remained in the relatively large test specimens. A longer heat treatment than recommended by the manufacturer for the porcelain firing cycles is needed to completely eliminate the as-cast dendritic structure in these specimens. The Pd-Cu-Ga alloy exhibited superior fatigue resistance to the Pd-Ga alloy, which has an equiaxed-grain microstructure and lower yield strength.

Journal Article↗
PubMed1999

Characterization of the interface between prefabricated gold copings and cast dental alloy in implant restorations.

The objective of this study was to analyse the characteristics of the metal interface between the casting of a dental noble alloy and prefabricated gold copings (OCTA-ITI Implant System) after the fabrication procedures of a prosthetic implant-retained superstructure. The microscopical investigation, performed by optical microscopy (OM) and scanning electron microscopy (SEM), of the region around the cylinder after the casting process and the subsequent porcelain firing procedures showed the presence of an ideal interface, including: i) maintenance of coping and casting alloy microstructures up to the interface, and ii) absence of interfacial reaction products. A low content of porosity (less than 3% by volume in average) was observed in the casting alloy bulk as well as at interface. The investigation by energy-dispersive spectroscopy (EDS) of the alloy composition close to the interface showed the presence of a minimal elemental interdiffusion, suggesting that an adequate compatibility between alloy and coping characterized the materials used. A small decrease of the prefabricated coping hardness was also observed after the casting and porcelain firing procedures.

Dental Abutments↗
PubMed1989

Anterior segment vascular casting.

Vascular corrosion casting provides a permanent three-dimensional record of the deeper vasculature of the anterior segment whereas fluorescein angiography allows clinical examination of superficial vessels. Morphological findings on scanning electron microscopy of vascular casts of the anterior segment in sheep are presented and compared with that of man by casting techniques. Sheep illustrate the basic mammalian anterior segment vascular architecture but lack anterior ciliary arteries which connect with the deeper collateral arterial circles. The casting technique is described and its use to answer comparative anatomical, pathological and clinical questions explained. These techniques are being applied to examine changes to the anterior ciliary arteries and the deeper vessels following strabismus surgery in an animal model. Scanning electron microscopy of vascular corrosion casts has given a new dimension to micro-vascular anatomy.

Animals↗
PubMed2003

Complex hybrid origin of genetic caste determination in harvester ants.

Caste differentiation and division of labour are the hallmarks of insect societies and at the root of their ecological success. Kin selection predicts that caste determination should result from environmentally induced differences in gene expression, a prediction largely supported by empirical data. However, two exceptional cases of genetically determined caste differentiation have recently been found in harvester ants. Here we show that genetic caste determination evolved in these populations after complex hybridization events. We identified four distinct genetic lineages, each consisting of unique blends of the genomes of the parental species, presumably Pogonomyrmex barbatus and P. rugosus. Crosses between lineages H1 and H2 and between J1 and J2 give rise to workers, whereas queens develop from within-lineage matings. Although historical gene flow is evident, genetic exchange among lineages and between lineages and the parental species no longer occurs. This unusual system of caste determination seems to be evolutionarily stable.

Animals↗
PubMed2025

Integration of therapeutic cargo into the human genome with programmable type V-K CAST.

CRISPR-associated (Cas) transposases (CAST) are RNA-guided systems capable of programmable integration of large segments of DNA without creating double-strand breaks. Engineered Cascade CAST function in human cells but are challenging to deploy due to the complexity of the targeting components. Unlike Cascade, which require three Cas proteins, type V-K CAST require a single Cas12k effector for targeting. Here, we show that compact type V-K CAST from uncultivated microbes are repurposable for programmable DNA integration into the genome of human cells. Engineering for nuclear localization and function enables integration of a therapeutically relevant transgene at a safe-harbor site in multiple human cell types. Notably, off-targets are rare events reproducibly found in specific genomic regions. These CAST advancements are expected to accelerate applications of genome editing to therapeutic development, biotechnology, and synthetic biology.

Humans↗
PubMed2005

Exposure and inhalation risk assessment in an aluminium cast-house.

To date the exposure, absorption and respiratory health effects of cast-house workers have not been described since most studies performed in the aluminium industry are focused on exposure and health effects of potroom personnel. In the present study, we assessed the external exposure and the absorbed dose of metals in personnel from the aluminium cast house. This was combined with an evaluation of respiratory complaints and the lung function of the personnel. 30 workers from an aluminium casting plant participated and 17 individuals of the packaging and distribution departments were selected as controls. The exposure was assessed by the quantification of total inhalable fume with metal fraction and by the determination of urinary aluminium, chromium, beryllium, manganese and lead concentration. Carbon monoxide (CO), carbon dioxide (CO2), aldehydes and polyaromatic hydrocarbons and man-made mineral fibres concentration were assessed as well. In order to evaluate their respiratory status each participant filled out a questionnaire and their lung function was tested by forced spirometry. Total inhalable fume exposure was maximum 4.37 mg m(-3). Exposure to the combustion gases, man-made mineral fibres and metal fume was well below the exposure limits. Beryllium could not be detected in the urine. The values of aluminium, manganese and lead in the urine were all under the respective reference value. One individual had a urinary chromium excretion above the ACGIH defined biological exposure index (BEI) of 30 microg g(-1) creatinine. There was no significant difference in any of the categories of the respiratory questionnaire and in the results of the spirometry between cast house personnel and referents (Chi-square, all p > 0.05). Exposure in cast houses seem to be acceptable under these conditions. However, peak exposure to fumes cannot be excluded and the potential risk of chromium and beryllium exposure due to the recycling of aluminium requires further attention.

Air Pollutants, Occupational↗
PubMed1991

An evaluation of CAST: a Computer-Aided Speechreading Training program.

This study assessed the effectiveness of CAST (Computer-Aided Speechreading Training program). Two groups of 8 normal-hearing adults completed a pretraining visual speech perception test protocol that consisted of a Visual-Consonant Recognition Test, a test of Sentence Understanding Without Context, a test of Sentence Understanding With Context, and a semiautomated modified Continuous Discourse Tracking activity available with CAST. One group completed the CAST program. A posttraining test protocol was administered to the subjects 2 weeks following the maximum time provided to complete the training program (i.e., 10 weeks). Independent t tests revealed no differences between the control group and the experimental group in the percentage improvement score obtained on the following measures: viseme recognition score, Sentence Understanding Without Context (key word and total word recognition scores), and Sentence Understanding With Context (key word recognition score). Significant differences between the groups were found for the total word recognition score on the Sentence Understanding With Context test and the CAST modified Continuous Discourse Tracking activity. The results indicate that CAST was most effective in developing aspects of synthetic visual speech perception skills.

Adult↗
PubMed2003

Caste fate conflict in swarm-founding social hymenoptera: an inclusive fitness analysis.

A caste system in which females develop into morphologically distinct queens or workers has evolved independently in ants, wasps and bees. Although such reproductive division of labour may benefit the colony it is also a source of conflict because individual immature females can benefit from developing into a queen in order to gain greater direct reproduction. Here we present a formal inclusive fitness analysis of caste fate conflict appropriate for swarm-founding social Hymenoptera. Three major conclusions are reached: (1) when caste is self-determined, many females should selfishly choose to become queens and the resulting depletion of the workforce can substantially reduce colony productivity; (2) greater relatedness among colony members reduces this excess queen production; (3) if workers can prevent excess queen production at low cost by controlled feeding, a transition to nutritional caste determination should occur. These predictions generalize results derived earlier using an allele-frequency model [Behav. Ecol. Sociobiol. (2001) 50: 467] and are supported by observed levels of queen production in various taxa, especially stingless bees, where caste can be either individually or nutritionally controlled.

Animals↗
PubMed1978

Development of sensitivity to information provided by cast shadows in pictures.

The shadow cast by an object in a two-dimensional picture can specify for the observer the spatial relations between that object and its surroundings, and also the shape and size of the object itself. Some sensitivity to this information is present even in three-year-old children. Experiment 1 provided evidence that three- and four-year-old children can rely on the shape of the shadow cast by an object to judge the shape of the object. In experiment 2, with adults and three- and four-year-old children, the location of the shadow cast by an object influenced the perceived depth and height off the ground plane of the object. Although even the three-year-old children were sensitive to the location of the cast shadows, there was evidence of improvement with age in judging the distance and size of the object. The three-year-olds were not able to judge the object's size when the location of the cast shadow provided the only differential information for size. In contrast, they were significantly better in judging size when the location of the object, rather than the location of the shadow, was varied.

Adult↗
PubMed2006

Social exploitation of hexamerin: RNAi reveals a major caste-regulatory factor in termites.

Lower termites express a unique form of eusocial polyphenism in that totipotent workers can differentiate into either soldier or reproductive caste phenotypes. In this initial effort using RNA interference in termites, we found that two hexamerin genes, Hex-1 and Hex-2, participate in the regulation of caste polyphenism. Our methodology involved a dual gene-silencing approach that used a single short-interfering RNA fragment to silence the two homologous hexamerin genes. We performed validation studies that evaluated effects on nontarget housekeeping genes, silencing of a nonhousekeeping control gene, and effects at the protein level. We found that the two hexamerin proteins, which are inducible by the morphogenetic juvenile hormone and which constitute a significant proportion of total termite protein, suppress juvenile-hormone-dependent worker differentiation to the soldier caste phenotype. This mechanism allows termite colonies to retain high proportions of altruistic worker caste members, thus apparently enhancing colony-inclusive fitness. These findings demonstrate a unique status quo regulatory mechanism for termite worker caste retention and provide an example of previously undescribed preadult developmental/caste-regulatory genes from any social insect.

Amino Acid Sequence↗
PubMed2003

Worker caste polymorphism has a genetic basis in Acromyrmex leaf-cutting ants.

Division of labor is fundamental to the success of all societies. The most striking examples are the physically polymorphic worker castes in social insects with clear morphological adaptations to different roles. These polymorphic worker castes have previously been thought to be a classic example of nongentically controlled polymorphism, being mediated entirely by environmental cues. Here we show that worker caste development in the leaf-cutting ant Acromyrmex echinatior has a significant genetic component. Individuals of different patrilines within the same colony differ in their propensities to develop into minor or major workers. The mechanism appears to be plastic, with caste destiny resulting from interplay between nurture and nature. Unlike the few other recently discovered examples of a genetic influence on caste determination, the present result does not relate to any rare or exceptional circumstances, such as interspecific hybridization. The results suggest that a significant role of genetics may have been overlooked in our understanding of other complex polymorphisms of social insects.

Animals↗