SEARCH · Search PubMed

Results for “layer”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45Linked to original sources

PubMed1996

Granulosa layer: primary site of regulation of plasminogen activator messenger ribonucleic acid by luteinizing hormone in the avian ovary.

Plasminogen activator (PA) is hypothesized to be important in the remodeling of the extracellular matrix during follicular growth. The granulosa layer produces high amounts of PA in response to a stimulatory factor, produced by the theca layer, that is inhibited by LH. To determine the site and mechanism by which LH inhibits PA production, we asked 1) whether LH acts on the granulosa layer and/or the theca layer to inhibit PA production by the largest preovulatory follicle (F1), and 2) whether LH affects PA production by acting at the mRNA or protein level. Sections (10 mm in diameter) of granulosa layers obtained from the F1 follicle before (14 h before ovulation) or after (2 h before ovulation) the LH surge were incubated (24 h at 37 degrees C) in theca-conditioned medium; this medium had been prepared by incubation of 10-mm-diameter sections of theca layers, obtained before (14 h before ovulation) or after (2 h before ovulation) the LH surge, in Dulbecco's Modified Eagle's Medium for 24 h at 37 degrees C. PA production in culture medium was measured with use of the chromogenic substrate S-2251. PA production was high when granulosa layers obtained before the LH surge were incubated in theca-conditioned medium obtained before the LH surge; it was also high when granulosa layers obtained before the LH surge were incubated in theca-conditioned medium obtained after the LH surge. PA production was low when granulosa layers obtained after the LH surge were incubated in theca-conditioned medium obtained before the LH surge, and was also low when granulosa layers obtained after the LH surge were incubated in theca-conditioned medium obtained after the LH surge. Northern and Western blots and activity assays performed on granulosa layer homogenates indicated that PA mRNA, protein, and activity were high before the LH surge and low after the LH surge. Production of the stimulatory factor by the theca layer is apparently unaffected by LH. After exposure to LH, the granulosa layer is no longer capable of producing PA, even in the presence of the theca-derived stimulatory factor. We conclude that the granulosa layer is the site of mRNA and/or protein regulation of PA production by LH.

Animals↗

PubMed2004

S-layer glycan-specific loci on the chromosome of Geobacillus stearothermophilus NRS 2004/3a and dTDP-L-rhamnose biosynthesis potential of G. stearothermophilus strains.

The approximately 16.5 kb surface layer (S-layer) glycan biosynthesis (slg) gene cluster of the Gram-positive thermophile Geobacillus stearothermophilus NRS 2004/3a has been sequenced. The cluster is located immediately downstream of the S-layer structural gene sgsE and consists of 13 ORFs that have been identified by database sequence comparisons. The cluster encodes dTDP-L-rhamnose biosynthesis (rml operon), required for building up the polyrhamnan S-layer glycan, as well as for assembly and export of the elongated glycan chain, and its transfer to the S-layer protein. This is the first report of a gene cluster likely to be involved in the glycosylation of an S-layer protein. There is evidence that this cluster is transcribed as a polycistronic unit, whereas sgsE is transcribed monocistronically. To get insights into the regulatory mechanisms underlying glycosylation of the S-layer protein, the influence of growth temperature on the S-layer was investigated in seven closely related G. stearothermophilus strains, of which only strain NRS 2004/3a possessed a glycosylated S-layer. Chromosomal DNA preparations of these strains were screened for the presence of the rml operon, because L-rhamnose is a frequent constituent of S-layer glycans. From rml-positive strains, flanking regions of the operon were sequenced. Comparison with the slg gene cluster of G. stearothermophilus NRS 2004/3a revealed sequence homologies between adjacent genes. The temperature inducibility of S-layer protein glycosylation was investigated in those strains by raising the growth temperature from 55 degrees C to 67 degrees C; no change of either the protein banding pattern or the glycan staining behaviour was observed on SDS-PAGE gels, although the sgsE transcript was several-fold more abundant at 67 degrees C. Cell-free extracts of the strains were capable of converting dTDP-D-glucose to dtdp-L-rhamnose. Taken together, the results indicate that the rml locus is highly conserved among G. stearothermophilus strains, and that in the investigated rml-containing strains, dTDP-L-rhamnose is actively synthesized in vitro. However, in contrast to previous reports for G. stearothermophilus wild-type strains, an increase in growth temperature did not switch an S-layer protein phenotype to an S-layer glycoprotein phenotype, via the de novo generation of a new S-layer gene sequence.

Bacillaceae↗

PubMed2005

Novel surface layer protein genes in Bacillus sphaericus associated with unusual insertion elements.

The surface layer (S-layer) protein genes of the uranium mining waste pile isolate Bacillus sphaericus JG-A12 and of its relative B. sphaericus NCTC 9602 were analysed. The almost identical N-termini of the two S-layer proteins possess a unique structure, comprising three N-terminal S-layer homologous (SLH) domains. The central parts of the proteins share a high homology and are related to the S-layer proteins of B. sphaericus CCM 2177 and P-1. In contrast, the C-terminal parts of the S-layer proteins of JG-A12 and NCTC 9602 differ significantly between each other. Surprisingly, the C-terminal part of the S-layer protein of JG-A12 shares a high identity with that of the S-layer protein of B. sphaericus CCM 2177. In both JG-A12 and NCTC 9602 the chromosomal S-layer protein genes are followed by a newly identified putative insertion element comprising three ORFs, which encode a putative transposase, a putative integrase/recombinase and a putative protein containing a DNA binding helix-turn-helix motif, and the S-layer-protein-like gene copies sllA (9602) or sllB (JG-A12). Interestingly, both B. sphaericus strains studied were found to contain an additional, plasmid-located and silent S-layer protein gene with the same sequence as sllA and sllB. The primary structures of the corresponding putative proteins are almost identical in both strains. The N-terminal and central parts of these S-layer proteins share a high identity with those of the chromosomally encoded functional S-layer proteins. Their C-terminal parts, however, differ significantly. These results strongly suggest that the S-layer protein genes have evolved via horizontal transfer of genetic information followed by DNA rearrangements mediated by mobile elements.

Bacillus↗

PubMed1997

Purification and characterization of Campylobacter rectus surface layer proteins.

Campylobacter rectus is a putative periodontopathogen which expresses a proteinaceous surface layer (S-layer) external to the outer membrane. S-layers are considered to play a protective role for the microorganism in hostile environments. The S-layer proteins from six different C. rectus strains (five human isolates and a nonhuman primate [NHP] isolate) were isolated, purified, and characterized. The S-layer proteins of these strains varied in molecular mass (ca. 150 to 166 kDa) as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. They all reacted with monospecific rabbit antiserum to the purified S-layer of C. rectus 314, but a quantitative enzyme-linked immunosorbent assay demonstrated a strong antigenic relationship among the five human strains, while the NHP strain, 6250, showed weaker reactivity. Amino acid composition analysis showed that the S-layers of four C. rectus strains contained large proportions of acidic amino acids (13 to 27%) and that >34% of the amino acid residues were hydrophobic. Amino acid sequence analysis of six S-layer proteins revealed that the first 15 amino-terminal amino acids were identical and showed seven residues of identity with the amino-terminal sequence of the Campylobacter fetus S-layer protein SapA1. CNBr peptide profiles of the S-layer proteins from C. rectus 314, ATCC 33238, and 6250 confirmed that the S-layer proteins from the human strains were similar to each other and somewhat different from that of the NHP isolate (strain 6250). However, the S-layer proteins from the two human isolates do show some structural heterogeneity. For example, there was a 17-kDa fragment unique to the C. rectus 314 S-layer. The amino-terminal sequence of this peptide had homology with the C. rectus 51-kDa porin and was composed of nearly 50% hydrophobic residues. Thus, the S-layer protein from C. rectus has structural heterogeneity among different human strains and immunoheterogeneity with the NHP strain.

Amino Acid Sequence↗

PubMed1989

Three-dimensional structure of an open form of the surface layer from the fish pathogen Aeromonas salmonicida.

Cell-free culture supernatants of a lipopolysaccharide (LPS) O-polysaccharide-deficient, single-insertion transposon mutant of the tetragonal surface protein array (S layer)-containing fish pathogen Aeromonas salmonicida were examined by electron microscopy. Negative staining showed that the S layer was released as sheets of tetragonal material, indicating that although surface retention of assembled S layer requires the presence of wild-type LPS oligosaccharides, initial assembly of S-layer subunits into sheets does not require the presence of O-polysaccharide chains. The three-dimensional structure of the S layer was reconstructed from tilted micrographs of the released sheets. Horizontal sections through this reconstruction showed that the released sheets were composed of two identical S layers that were perfectly in register. The reconstructed layer had a lattice constant of 12.5 nm. At a resolution of 1.6 nm, the layer consisted of a major tetragon at one fourfold axis of symmetry and a minor tetragon at the second fourfold axis of symmetry. The core, composed of four of the major domains, contained a large depression and was located toward the inside of the layer. The minor tetragon provided connectivity within the layer and was located toward the outer surface of the layer. Projections through the double layer gave a type I (closed) pattern (M. Stewart, T. J. Beveridge, and T. J. Trust, J. Bacteriol. 166:120-127, 1986), yet projections through the single layer indicated that the type II (open) pattern was present. This open pattern was indistinguishable from that seen in S layer released from the surfaces of wild-type cells.

Aeromonas↗

PubMed1993

Relevance of charged groups for the integrity of the S-layer from Bacillus coagulans E38-66 and for molecular interactions.

In this paper, the importance of charged amino and carboxyl groups for the integrity of the cell surface layer (S-layer) lattice from Bacillus coagulans E38-66 and for the self-assembly of the isolated subunits was investigated. Amidination of the free amino groups which preserved their positive net charge had no influence on both. On the other hand, acetylation and succinylation, which converted the amino groups into either neutral or negatively charged groups, and amidation of carboxyl groups were accompanied by the disintegration or at least by the loss of the regular structure of the S-layer lattice. Treatment of S-layer monolayers with the zero-length cross-linker carbodiimide led to the introduction of peptide bonds between activated carboxyl groups and amino groups from adjacent subunits. This clearly indicated that in the native S-layer lattice the charged groups are located closely enough for direct electrostatic interactions. Under disrupting conditions in which the S-layer polypeptide chains were unfolded, 58% of the Asx and Glx residues could be amidated, indicating that they occur in the free carboxylic acid form. As derived from chemical modification of monolayer self-assembly products, about 90% of the lysine and 70% of the aspartic and glutamic acid residues are aligned on the surface of the S-layer protein domains. This corresponded to 45 amino groups and to 63 carboxyl groups per S-layer subunit. Labelling experiments with macromolecules with different sizes and charges and adsorption studies with ion-exchange particles revealed a surplus of free carboxyl groups on the inner and on the outer faces of the S-layer lattice. Since the carboxyl groups on the outer S-layer face were accessible only for protein molecules significantly smaller then the S-layer protomers or for positively charged, thin polymer chains extending from the surface of ion-exchange beads, the negatively charged sites must be located within indentations of the corrugated S-layer protein network. This was in contrast to the carboxyl groups on the inner S-layer face, which were found to be exposed on elevations of the S-layer protein domains (D. Pum, M. Sára, and U.B. Sleytr, J. Bacteriol. 171:5296-5303, 1989).

Amino Acids↗

PubMed1978

The envelope of Micrococcus radiodurans: isolation, purification, and preliminary analysis of the wall layers.

Two methods are presented that separate the complex envelope of Micrococcus radiodurans, strain Sark, into its constituent layers. The first involved treating whole cells with 0.025 M Tris buffer (pH 7.5) containing 2 mM of calcium and 3 mM of magnesium, resulting in the degradation of an intermediate ('compartmentalized') layer and consequent sloughing of the outer subunit and interior layers to form vesicles. This treatment also appears to show that the interior layer may be connected with the peptidoglycan-containing 'holey' layer. The second method involves treating whole cells with benzene followed by sonication; the results suggested that this treatment only released the outer layers from the 'compartmentalized' layer and did not degrade layers. Following benzene treatment, digestion of the 'compartmentalized' layer with cold sodium dodecyl sulfate (SDS) released the 'holey' layer. Electrophoretic analysis of some of the isolated layer preparations suggested that the subunit layer consisted of three major proteins of 90 000, 92 000, and 94 000 molecular weight, one minor protein of 100 000, a small amount of carbohydrate associated with the 94 000 protein, and a small amount of a 55 000 lipoprotein. The interior layer contained at least 10 proteins and may be attached to the peptidoglycan-containing 'holey' layer by means of the 55 000 lipoprotein.

Cell Fractionation↗

PubMed1983

Congruence of spatial organization of tactile projections to granule cell and Purkinje cell layers of cerebellar hemispheres of the albino rat: vertical organization of cerebellar cortex.

1. We compared the spatial pattern of shortest latency somatosensory (tactile) projections to the Purkinje cell (PC) layer and to the underlying granule cell (GC) layer in tactile areas of rat cerebellar cortex. Micro-mapping methods were used to sample single units in the PC layer and multiple units in the GC layer of both anesthetized and unanesthetized rats. Mechanical and electrical stimulation of the body surface were employed. Responsiveness of PCs to cutaneous stimulation was assessed by constructing histograms of simple spike activity and statistically comparing poststimulus activity to nonstimulated base-line PC activity. 2. We found that PCs respond to tactile stimulation with increases (7-10 ms) followed by decreases (8-15 ms) in simple spike activity. Increases in simple spike activity followed activation of the underlying GC layer by 1-4 ms, while decreases in simple spike activity were found 2-5 ms after GC layer activation. 3. PCs were found to have both excitatory and inhibitory receptive fields (RFs). Excitatory RFs were restricted to small areas of a single body part and for each PC were very similar or identical to the RFs of neurons in the immediately subjacent GC layer. Inhibitory PC RFs were larger, often containing more than one body part and for each PC, were only partially similar to the RFs of subjacent GCs. PC inhibitory RFs also often included body surfaces projecting to the nearby but not to the underlying GC layer. 4. Stimulation of a single peripheral locus resulted in small, distinct regions of PC layer excitation and inhibition. Areas of PC excitation overlie activated regions of the GC layer, while inhibited PCs overlie both activated and nonactivated GC regions. 5. We found PCs to be organized in groups or patches with respect to the specific body region that was capable of activating them (upper lip, lower lip, etc.). Adjacent patches of PCs often represented widely separated body parts. This pattern of PC layer activating RF projections was congruent with the pattern of excitatory RF projections to the underlying GC layer. 6. These results indicate that there is a vertical organization in GC-PC excitatory relations, while GC-induced PC inhibition is slightly more widely distributed. 7. Our finding that the patchlike activation of PCs is congruent with that of the underlying GC layer contrasts with the classical concept that PCs are activated by parallel fibers in a "beamlike" fashion from a patch of GCs. Thus, a reevaluation of the role of parallel fibers seems to us to be in order. 8. In conclusion, our results support the view that short-latency afferent tactile projections to both the GC and PC layers of cerebellar cortex are highly organized spatially. This specificity of body surface projections must be incorporated into modern views of the functional organization of cerebellar cortex.

Animals↗

PubMed2004

A two-layered mechanical model of the rat esophagus. Experiment and theory.

BACKGROUND: The function of esophagus is to move food by peristaltic motion which is the result of the interaction of the tissue forces in the esophageal wall and the hydrodynamic forces in the food bolus. The structure of the esophagus is layered. In this paper, the esophagus is treated as a two-layered structure consisting of an inner collagen-rich submucosa layer and an outer muscle layer. We developed a model and experimental setup for determination of elastic moduli in the two layers in circumferential direction and related the measured elastic modulus of the intact esophagus to the elastic modulus computed from the elastic moduli of the two layers. METHODS: Inflation experiments were done at in vivo length and pressure-diameters relations were recorded for the rat esophagus. Furthermore, the zero-stress state was taken into consideration. RESULTS: The radius and the strain increased as function of pressure in the intact as well as in the individual layers of the esophagus. At pressures higher than 1.5 cmH2O the muscle layer had a larger radius and strain than the mucosa-submucosa layer. The strain for the intact esophagus and for the muscle layer was negative at low pressures indicating the presence of residual strains in the tissue. The stress-strain curve for the submucosa-mucosa layer was shifted to the left of the curves for the muscle layer and for the intact esophagus at strains higher than 0.3. The tangent modulus was highest in the submucosa-mucosa layer, indicating that the submucosa-mucosa has the highest stiffness. A good agreement was found between the measured elastic modulus of the intact esophagus and the elastic modulus computed from the elastic moduli of the two separated layers.

Animals↗

PubMed2005

Structure, surface interactions, and compressibility of bacterial S-layers through scanning force microscopy and the surface force apparatus.

Two-dimensional crystalline bacterial surface layers (S-layers) are found in a broad range of bacteria and archaea as the outermost cell envelope component. The self-assembling properties of the S-layers permit them to recrystallize on solid substrates. Beyond their biological interest as S-layers, they are currently used in nanotechnology to build supramolecular structures. Here, the structure of S-layers and the interactions between them are studied through surface force techniques. Scanning force microscopy has been used to study the structure of recrystallized S-layers from Bacillus sphaericus on mica at different 1:1 electrolyte concentrations. They give evidence of the two-dimensional organization of the proteins and reveal small corrugations of the S-layers formed on mica. The lattice parameters of the S-layers were a=b=14 nm, gamma=90 degrees and did not depend on the electrolyte concentration. The interaction forces between recrystallized S-layers on mica were studied with the surface force apparatus as a function of electrolyte concentration. Force measurements show that electrostatic and steric interactions are dominant at long distances. When the S-layers are compressed they exhibit elastic behavior. No adhesion between recrystallized layers takes place. We report for the first time, to our knowledge, the value of the compressibility modulus of the S-layer (0.6 MPa). The compressibility modulus is independent on the electrolyte concentration, although loads of 20 mN m-1 damage the layer locally. Control experiments with denatured S-proteins show similar elastic properties under compression but they exhibit adhesion forces between proteins, which were not observed in recrystallized S-layers.

Bacterial Proteins↗

PubMed1990

[Quantitative analysis of the complete image layer in rotational panoramic radiography].

Radiography is a fundamental method of examination in clinical dentistry. Rotational panoramic radiography provides comprehensive information on the maxilla and mandible, and is thus a very valuable procedure for dental practitioners. It is impossible for the image layer to be altered to perfectly suit each individual patient, so the closest corresponding image layer is selected from the several layers in the current panoramic x-ray units. Therefore, it is essential for the two-dimensional characteristics of the layers to be accurately understood when performing radiography and diagnosis. There are a number of subjective and objective methods available to evaluate the image layers, but they all have certain disadvantages. Accordingly, an experimental model was used to quantitatively analyze the complete image layer from the anterior to the TMJ region. At first the central plane of the image layer was obtained by analyzing the x-ray beam. Subsequently, the modulation transfer function (MTF) values of the complete image layer from the anterior to the TMJ region were measured using the slit method with digital Fourier transformation. In order to define the image layer, the information transfer factor (ITF) was calculated by integrating the squared MTF from 0 to 10 cycles/mm at each position. The measured image layer was then compared with the layer calculated by the method of McDavid et al. A Veraview apparatus (J. Morita Corp., Japan) with a 1.1 mm primary slit width was used as the panoramic x-ray unit, and DuPont HiPlus/Kodax X-Omat RP was used as the screen/film combination. The results are summarized below. 1. The central plane of the layer, which was obtained by analyzing the x-ray beam, showed a palabolic curve on the right side and a sigmoid curve on the left side, and the forms of the curves differed between the premolar and the molar regions. 2. The average horizontal angle of the beam to the median line on the right and left sides was analyzed using panoramic radiograms. It was 24.2 degrees for the mandibular canine, 58.4 degrees for the surface between the 1st and 2nd molars, and 95.1 degrees for the condyle. 3. When the limit of the image layer was defined as an ITF of 75, the measured image layer thickness was 5.74 mm in the anterior region, 7.4 mm in the canine region, 15.1 mm in the molar region, and 20.7 mm in the TMJ region. The calculated values were 6.16 mm, 8.9 mm, 15.7 mm, and 20.0 mm, respectively.(ABSTRACT TRUNCATED AT 400 WORDS)

Fourier Analysis↗

PubMed1984

Differential deposition and utilization of backfat layers in swine.

Growing pigs were nutritionally manipulated to study depletion, depletion followed by repletion or deposition of the individual backfat layers. Obese and lean pigs were used to gain insight into the possible role of genetic selection for backfat depth on each backfat layer. Backfat depth, including individual layers was measured in live pigs at sequential times by ultrasonic methods. At a variety of anatomical locations, change in backfat expressed as a rate or as percentage change during both depletion and deposition was greater in layer 2 than layer 1 (outermost). Genetically obese pigs increased backfat depth by accretion of layer 2 to a greater extent than layer 1. Genetically lean pigs had more equal accretion of the two layers with a preference toward layer 1 in some cases. Selection for total backfat depth appears to have selected layer 2 in preference to layer 1. Backfat layer 1 changed to a small extent compared to layer 2 during depletion, deposition or genetic selection possibly indicating a greater metabolic role in vivo for layer 2.

Adipose Tissue↗

PubMed1999

Two-layer film as a laser soldering biomaterial.

BACKGROUND AND OBJECTIVES: A two-layer solder was developed to weld at low laser intensity and to provide a new method of measuring solder-tissue temperature. STUDY DESIGN/MATERIALS AND METHODS: A film solder consisted of a white layer (bovine serum albumin (BSA) and distilled water) and a black layer (BSA, carbon black (CB), and distilled water). This two-layer solder was used with a diode laser to weld sections of dog small intestine (lambda = 810 nm, power = 200 +/- 20 mW, radiation dose = 18 +/- 1 J/mg). Sections of intestine were welded only with one-layer black solders as control group. The temperature difference between the external solder surface and the tissue-solder interface was evaluated during welding. RESULTS: The two-layer solder performed welds as strong as the one-layer solder ( approximately 0.12 N) but with less laser intensity on the black layer. The temperature difference between the external surface of the solder and the solder-tissue interface was significantly less for the two-layer solder than for the one-layer solder ( approximately 6 degrees C and approximately 15 degrees C, respectively; P < 0.05). CONCLUSIONS: The two-layer solder appeared to be more efficient at soldering biomaterials than the one-layer solder. Furthermore, the heat diffusion from the black midplane of the two-layer solder decreased the difference in temperature recorded on the solder external surface and on the solder-tissue interface.

Animals↗

PubMed2001

Layer V in cat primary auditory cortex (AI): cellular architecture and identification of projection neurons.

The cytoarchitectonic organization and the structure of layer V neuronal populations in cat primary auditory cortex (AI) were analyzed in Golgi, Nissl, immunocytochemical, and plastic-embedded preparations from mature specimens. The major cell types were characterized as a prelude to identifying their connections with the thalamus, midbrain, and cerebral cortex using axoplasmic transport methods. The goal was to describe the structure and connections of layer V neurons more fully. Layer V has three sublayers based on the types of neuron and their sublaminar projections. Four types of pyramidal and three kinds of nonpyramidal cells were present. Classic pyramidal cells had a long apical dendrite, robust basal arbors, and an axon with both local and corticofugal projections. Only the largest pyramidal cell apical dendrites reached the supragranular layers, and their somata were found mainly in layer Vb. Three types departed from the classic pattern; these were the star, fusiform, and inverted pyramidal neurons. Nonpyramidal cells ranged from large multipolar neurons with radiating dendrites, to Martinotti cells, with smooth dendrites and a primary trunk oriented toward the white matter. Many nonpyramidal cells were multipolar, of which three subtypes (large, medium, and small) were identified; bipolar and other types also were seen. Their axons formed local projections within layer V, often near pyramidal neurons. Several features distinguish layer V from other layers in AI. The largest pyramidal neurons were in layer V. Layer V neuronal diversity aligns it with layer VI (Prieto and Winer [1999] J. Comp. Neurol. 404:332--358), and it is consistent with the many connectional systems in layer V, each of which has specific sublaminar and neuronal origins. The infragranular layers are the source for several parallel descending systems. There were significant differences in somatic size among these projection neurons. This finding implies that diverse corticofugal roles in sensorimotor processing may require a correspondingly wide range of neuronal architecture.

Animals↗

PubMed1984

The non-pyramidal cells in layer III of cat primary auditory cortex (AI).

The form and location of non-pyramidal neurons in layer III of the primary auditory cortex (AI) of adult cats is described in Golgi, Nissl, and other material. The cells were compared to the profiles of retrogradely labeled, commissurally interconnected cells. A principal finding is that certain non-pyramidal and pyramidal cells project interhemispherically to AI; a second conclusion is that the retrogradely labeled commissural cells form small clusters or narrow strips separated by unlabeled patches even after massive injections in the opposite AI. The non-pyramidal cells of origin have not yet been conclusively identified, but they must include one (or more) of the following six types of cells observed in Golgi-impregnated material: tufted or bitufted cells with a radially elongated dendritic arbor; sparsely spinous stellate neurons with thin, smooth dendrites and vertically disposed axonal branches; small stellate cells with varicose dendrites, a restricted dendritic field, and a profusely branched local axon; bipolar neurons with long, thin dendrites; medium-sized multipolar cells with radiating, sparsely branched dendrites; and small stellate neurons with smooth dendrites and a tiny dendritic field. These non-pyramidal cells are found throughout layer III but are more numerous in the upper part, layer IIIa, where they mingle with the small pyramidal neurons. As a rule the axonal branches of non-pyramidal cells are more numerous than those arising from layer III pyramidal neurons, and although they have many axonal collaterals, most project locally and vertically in narrow radial strips. In contrast, pyramidal cell axons have ascending and descending components which invade large, lateral territories in many cortical layers. Layer III non-pyramidal neurons are similar to those in layer IV in certain respects, although their dendritic fields are more spherical and less tufted than those of layer IV cells, and their axons have more local, limited targets. These axons appear to contribute but little to the conspicuous, lateral fiber striae in layer III. The primary intrinsic targets of non-pyramidal cell axons appear to be the apical dendrites of medium-sized and large layer III pyramidal cells, and recurrent branches to the parent cell; their fine, distal branches fortify the vertical plexus in layer III, and certain axons may descend into layer IV. Since layer III in AI receives both commissural and thalamic input, it is possible that these parallel, afferent channels are to some degree segregated, and to some degree convergent, onto particular types of cells.(ABSTRACT TRUNCATED AT 400 WORDS)

Afferent Pathways↗

PubMed2004

Hydroxyapatite and fluor-hydroxyapatite layered film on titanium processed by a sol-gel route for hard-tissue implants.

A double-layered coating, consisting of a hydroxyapatite (HA) outer film and a fluor-hydroxyapatite (FHA) inner film, was produced on a Ti substrate by a sol-gel route to improve the biocompatibility and functionality of the system. Dissolution behavior of and in vitro cellular responses to the layered film were investigated. Calcium nitrate and triethyl phosphite were used for calcium and phosphate precursors, respectively, and ammonium fluoride was added as a fluorine-ion source for FHA. The FHA layer was deposited on Ti by spin coating and subsequent heat treatment at 550 degrees C for 30 min in air, and then the HA layer was laid down over the FHA-coated Ti under the same conditions. After heat treatment, characteristic apatite structures and phases were developed on both FHA and HA films. The cross-section view of the HA/FHA film clearly showed a double-layered structure on Ti with each layer approximately 0.6-0.8-microm thickness. The coating layer was highly uniform and dense, and adhered to Ti substrate strongly with an adhesion strength of about 40 MPa. The in vitro solubility of the HA/FHA layered film in a physiological solution was between that of HA and FHA pure film, and the dissolution profile was quite biphasic, that is, an initial rapid period and a slowdown with increasing time, reflecting the gradient solubility of the fast HA outer structure/slow FHA inner structure. The human osteoblast-like HOS TE85 cells cultured on the HA/FHA layered film attached, spread, and grew favorably. The proliferation rate of the cells on the layered film was significantly higher (considered at p < 0.05 for n = 6) than that on Ti substrate and was similar to that on pure HA film. The alkaline phosphatase (ALP) activity and osteocalcin (OC) produced by the cells on the layered film were significantly higher (considered at p < 0.05 for n = 6) than those on Ti substrate. Moreover, the ALP and OC levels of cells on the layered film showed the trends of HA outer/FHA inner structure with respect to culture period, that is, HA initially and FHA later. These observations suggest that the HA/FHA layered film on Ti obtained by a sol-gel route possesses gradient functionality in terms of solubility and cellular responses, and find that those parameters can be tailored for specific use in hard-tissue implants.

Biocompatible Materials↗

PubMed1986

Neocortical layers I and II of the hedgehog (Erinaceus europaeus). I. Intrinsic organization.

The intrinsic organization and interlaminar connections in neocortical layers I and II have been studied in adult hedgehogs (Erinaceus europaeus) using the Golgi method. Layer I contains a dense plexus of horizontal fibers, the terminal dendritic bouquets of pyramidal cells of layer II and of underlying layers, and varieties of intrinsic neurons. Four main types of cells were found in layer I. Small horizontal cells represent most probably persisting foetal horizontal cells described for other mammals. Large horizontal cells, tufted cells, and spinous horizontal cells were also found in this layer. Layer II contains primitive pyramidal cells representing the most outstanding feature of the neocortex of the hedgehog. Most pyramidal cells in layer II have two, three or more apical dendrites, richly covered by spines predominating over the basal dendrites. These cells resemble pyramidal cells found in the piriform cortex, hippocampus and other olfactory areas. It is suggested that the presence of these neurons reflects the retention of a primitive character in neocortical evolution. Cells with intrinsic axons were found among pyramidal cells in layer II. These have smooth dendrites penetrating layer I and local axons forming extremely complex terminal arborizations around the bodies and proximal dendritic portions of pyramidal cells. They most probably effect numerous axo-somatic contacts resembling basket cells. The similarity of some axonal terminals with the chandelier type of axonal arborization is discussed. Other varieties of cells located in deep cortical layers and having ascending axons for layers I and II were also studied. It is concluded that the two first neocortical layers represent a level of important integration in this primitive mammal.

Animals↗

PubMed1992

A comparison of the electrophysiological properties of morphologically identified cells in layers 5B and 6 of the rat neocortex.

In vitro studies performed in mammalian brain slices have shown that cortical neurons differ in their intrinsic membrane properties. In the rodent cortex these properties are related to a specific cell morphology and synaptic connectivity in some cells but not in others. Due to their small size, little is known about the intrinsic membrane properties of layer 6 cells, however, and it is not clear whether cell morphology is related to electrophysiological properties in this layer. We used a combination of intracellular recording and dye-filling to study the electrophysiological and morphological characteristics of layer 6 cells of the rat sensorimotor cortex in vitro and compared their properties to those of large layer 5B pyramidal cells. Our sample of 24 filled and anatomically reconstructed cells in layer 6 confirms previous Golgi studies that showed them to be a morphologically diverse group consisting of regularly and irregularly oriented pyramidal cells and spiny nonpyramidal cells. Regular layer 6 pyramidal cells differed with respect to the length of their apical dendrites and extent of their axonal arborizations, while irregularly oriented pyramidal cells consisted of sideways or inverted pyramidal cells of variable size and morphology. Spiny nonpyramidal cells included bi-tufted and multi-polar cell types that differed in size and extent of dendritic trees. Many layer 6 cells showed long horizontal axon collaterals in layer 6, and an oblique or vertical projection to layer 4. Stimulation with intracellular constant current pulses revealed that the morphological diversity was mirrored by a similar electrophysiological diversity. Most layer 6 cells were capable of firing trains of action potentials characterized by an initial doublet or triplet followed by a train of single spikes (phasic-tonic mode). The majority of layer 6 cells could fire in either a tonic (single spikes only) mode with low strength current input and a phasic-tonic pattern with higher current strengths. A minority fired either always phasic-tonic or tonic-only spike trains. The size and sequence of spike afterpotentials during low-rate repetitive firing was highly variable in layer 6 cells suggesting that the relative importance of ionic currents responsible for spike repolarization and afterpotentials varied from cell to cell. Subthreshold responses showed prominent inward rectification, while hyperpolarizing "sag" was present in most cells tested. In comparison, large layer 5B pyramidal cells fired either phasic-tonic only or both phasic-tonic and tonic patterns. A minority of cells were capable of firing repetitive bursts, while the remainder fired repetitive single spikes.(ABSTRACT TRUNCATED AT 400 WORDS)

Animals↗