Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “TITRATION”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45Linked to original sources
PubMed1979

Photoreductive titration of the resonance Raman spectra of cytochrome oxidase in whole mitochondria.

A photoreductive titration of the resonance Raman (RR) spectra of cytochrome c oxidase in whole mitochondria was recorded by exploiting the preferential enhancement of the Raman signals of reduced cytochrome oxidase excited at 441.6 nm. When the sample was cooled to about--10 degrees C, it was possible to slow down the photoreductive effect of the laser and to record RR spectra at various states of reduction. Compared to the earliest recorded scan (most oxidized), the dithionite-reduced sample shows the appearance of new bands at 216, 363, 560, and 1665 cm-1. At intermediate stages of photoreduction, the 216- and 560-cm-1 bands appear before the 363- and 1665-cm-1 bands; photoreduction induces full intensity in the former bands, whereas the latter bands are photoreduced to 50% of the dithionite-reduced intensity. The relative intensities of a doublet at 1609--1623 cm-1 are affected by reduction: the band at 1609 cm-1 is weaker in the earlier scans; in later scans this band has grown to equal intensity with the 1623-cm-1 band. We conclude that this reductive titration of the RR spectrum of cytochrome c oxidase reflects three states in its reduction. The behavior of the doublet at 1609--1623 cm-1 suggests that the two hemes are nonequivalent but interacting. The band at 216 cm-1 may be indicative of an iron-copper interaction that is affected by the presence of external ligands.

Animals↗
PubMed2002

Thermodynamic binding parameters of individual epitopes of multivalent carbohydrates to concanavalin a as determined by "reverse" isothermal titration microcalorimetry.

The preceding paper [Dam, T. K., Roy, R., Pagé, D., and Brewer, C. F. (2002) Biochemistry 41, 1351-1358] demonstrated that Hill plots of isothermal titration microcalorimetry (ITC) data for the binding of di-, tri-, and tetravalent carbohydrate analogues possessing terminal 3,6-di-O-(alpha-D-mannopyranosyl)-alpha-D-mannopyranoside residues to the lectin concanavalin A (ConA) show increasing negative cooperativity upon binding of the analogues to the lectin. The present study demonstrates "reverse" ITC experiments in which the lectin is titrated into solutions of di- and trivalent analogues. The results provide direct determinations of the thermodynamics of binding of ConA to the individual epitopes of the two multivalent analogues. The n values (number of binding sites per carbohydrate molecule) derived from reverse ITC demonstrate two functional binding epitopes on both the di- and trivalent analogues, confirming previous "normal" ITC results with the two carbohydrates [Dam, T. K., Roy, R., Das, S. K., Oscarson, S., and Brewer, C. F. (2000) J. Biol. Chem. 275, 14223-14230]. The reverse ITC measurements show an 18-fold greater microscopic affinity constant of ConA for the first epitope of the divalent analogue versus its second epitope and a 53-fold greater microscopic affinity constant of ConA binding to the first epitope of the trivalent analogue versus its second epitope. The data also demonstrate that the microscopic enthalpies of binding of the two epitopes on the di- and trivalent analogues are essentially the same and that differences in the microscopic K(a) values of the epitopes are due to their different microscopic entropies of binding values. These findings are consistent with the increasing negative Hill coefficients of these analogues binding to ConA in the previous paper.

Calorimetry↗
PubMed2002

Ferrous ion binding to recombinant human H-chain ferritin. An isothermal titration calorimetry study.

Iron deposition within the iron storage protein ferritin involves a complex series of events consisting of Fe(2+) binding, transport, and oxidation at ferroxidase sites and mineralization of a hydrous ferric oxide core, the storage form of iron. In the present study, we have examined the thermodynamic properties of Fe(2+) binding to recombinant human H-chain apoferritin (HuHF) by isothermal titration calorimetry (ITC) in order to determine the location of the primary ferrous ion binding sites on the protein and the principal pathways by which the Fe(2+) travels to the dinuclear ferroxidase center prior to its oxidation to Fe(3+). Calorimetric titrations show that the ferroxidase center is the principal locus for Fe(2+) binding with weaker binding sites elsewhere on the protein and that one site of the ferroxidase center, likely the His65 containing A-site, preferentially binds Fe(2+). That only one site of the ferroxidase center is occupied by Fe(2+) implies that Fe(2+) oxidation to form diFe(III) species might occur in a stepwise fashion. In dilute anaerobic protein solution (3-5 microM), only 12 Fe(2+)/protein bind at pH 6.51 increasing to 24 Fe(2+)/protein at pH 7.04 and 7.5. Mutation of ferroxidase center residues (E62K+H65G) eliminates the binding of Fe(2+) to the center, a result confirming the importance of one or both Glu62 and His65 residues in Fe(2+) binding. The total Fe(2+) binding capacity of the protein is reduced in the 3-fold hydrophilic channel variant S14 (D131I+E134F), indicating that the primary avenue by which Fe(2+) gains access to the interior of ferritin is through these eight channels. The binding stoichiometry of the channel variant is one-third that of the recombinant wild-type H-chain ferritin whereas the enthalpy and association constant for Fe(2+) binding are similar for the two with an average values (DeltaH degrees = 7.82 kJ/mol, binding constant K = 1.48 x 10(5) M(-)(1) at pH 7.04). Since channel mutations do not completely prevent Fe(2+) binding to the ferroxidase center, iron gains access to the center in approximately one-third of the channel variant molecules by other pathways.

Amino Acid Substitution↗
PubMed2003

High-precision, high-throughput stability determinations facilitated by robotics and a semiautomated titrating fluorometer.

The use of statistical modeling to test hypotheses concerning the determinants of protein structure requires stability data (e.g., the free energy of denaturation in H(2)O, DeltaG(HOH)) from hundreds of protein mutants. Fluorescence-monitored chemical denaturation provides a convenient method for high-precision, high-throughput DeltaG(HOH) determination. For eglin c we find that a throughput of about 20 min per protein can be attained in a two-channel semiautomated titrating fluorometer. We find also that the use of robotics for protein purification and preparation of the solutions for chemical denaturation gives highly precise DeltaG(HOH) values in which the standard deviation of values from multiple preparations (+/-0.051 kcal/mol) differs very little from multiple measurements from a single preparation (+/-0.040 kcal/mol). Since the variance introduced into model fitting by DeltaG(HOH) increases as the square of measurement error, there is a premium on precision. In fact, the fraction of stability behavior explicable by otherwise perfect models goes from 98% to only 50% over the error range commonly reported for chemical denaturation measurements (0.1-0.6 kcal/mol). We have found that the precision of chemical denaturation DeltaG(HOH) measurements depends most heavily on the precision of the instrument used, followed by protein purity and the capacity to precisely prepare the solutions used for titrations.

Amino Acid Substitution↗
PubMed2006

Redox titration of all electron carriers of cytochrome c oxidase by Fourier transform infrared spectroscopy.

Electrochemical redox titrations of cytochrome c oxidase from Paraccocus denitrificans were performed by attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy. The majority of the differential infrared absorption features may be divided into four groups, which correlate with the redox transitions of the four redox centers of the enzyme. Infrared spectroscopy has the advantage of allowing one to measure independent alterations in redox centers, which are not well separated, or even observed, by other spectroscopic techniques. We found 12 infrared bands that titrated with the highest observed midpoint redox potential (E(m) = 412 mV at pH 6.5) and which had a pH dependence of 52 mV per pH unit in the alkaline region. These bands were assigned to be linked to the Cu(B) center. We assigned bands to the Cu(A) center that showed a pH-independent E(m) of 250 mV. Two other groups of infrared differential bands reflected redox transitions of the two heme groups and showed a more complex behavior. Each of them included two parts, corresponding to high- and low-potential redox transitions. For the bands representing heme a, the ratio of high- to low-potential components was ca. 3:2; for heme a(3) this ratio was ca. 2:3. Taking into account the redox interactions between the hemes, these ratios yielded a difference in E(m) of 9 mV between the hemes (359 mV for heme a; 350 mV for heme a(3) at pH 8.0). The extent of the redox interaction between the hemes (-115 mV at pH 8.0) was found to be pH-dependent. The pH dependence of the E(m) values for the two hemes was the same and about two times smaller than the theoretical one, suggesting that an acid/base group binds a proton upon reduction of either heme. The applied approach allowed assignment of infrared bands in each of the four groups to vibrations of the hemes, ligands of the redox centers, amino acid residues, and/or protein backbone. For example, the well-known band shift at 1737/1746 cm(-)(1) corresponding to the protonated glutamic acid E278 correlated with oxidoreduction of heme a.

Copper↗
PubMed1997

Time-resolved titrations of ASP-85 in bacteriorhodopsin: the multicomponent kinetic mechanism.

The Asp-85 residue, located in the vicinity of the retinal chromophore, plays a key role in the function of bacteriorhodopsin (bR) as a light-driven proton pump. In the unphotolyzed pigment the protonation of Asp-85 is responsible for the transition from the purple form (lambdamax = 570 nm) to the blue form (lambdamax = 605 nm) of bR (pKa = 3.5 in 20 mM NaCl). The Purple <=> Blue transition can also be induced by deionization (cation removal). These color changes offer a unique opportunity for time resolving the titration of a protein residue using conventional stopped-flow methodologies. We have studied the Purple <=> Blue equilibration kinetics in bR by exposing the system to pH and to cation jumps. Independently of the equilibration direction (Purple-->Blue or Blue-->Purple) and of the inducing concentration jump ([H+] or [cation]), the kinetics are found to exhibit analogous multicomponent features. Analysis of the data over a range of cation concentrations and pH values leads to the conclusion that the rate-determining step in the overall titration of Asp-85 is proton translocation through a specific proton channel. The multicomponent kinetics, extending over a wide time range (10(-2)-10(4) s), are accounted for in terms of a pH-dependent heterogeneity of proton channels. A model is presented in which the relative weight of four proton channels is determined by the state of protonation of two interacting, channel-controlling, protein residues A1 and A2. These findings bear on the mechanism of the vectorial proton translocation associated with the photocycle of bR.

Aspartic Acid↗
PubMed1998

CO/CO2 potentiometric titrations of carbon monoxide dehydrogenase from Clostridium thermoaceticum and the effect of CO2.

Acetogenic carbon monoxide dehydrogenases catalyze the reversible oxidation of CO to CO2 and the synthesis of acetyl-coenzyme A, utilizing two novel Ni-Fe-S active sites (the C- and A-clusters, respectively) and an [Fe4S4]2+/1+ cluster (the B-cluster) that serves to transfer electrons. Enzyme samples were titrated under equilibrium conditions using various partial pressures of CO in Ar and CO2 atmospheres. EPR signal intensities from each cluster were analyzed as a function of potential using the Nernst equation. The presence of CO2 raised the reduction potentials of the A-, B-, and C-clusters, and it appeared to increase the strength of CO (substrate for acetyl-CoA synthesis) binding to the reduced A-cluster. Carbon dioxide also appeared to stabilize an intermediate EPR-silent state of the C-cluster and alter the saturation/relaxation properties of the reduced B-cluster. Simulations assuming n values (number of e- involved in reduction) larger than appropriate for the individual reactions generally fit better to the titration data than those which assumed the appropriate n, indicating positive redox cooperativity. Carbon dioxide did not inhibit 1,10-phenanthroline from removing the labile Ni from the A-cluster, but it did inhibit the CO/acetyl-coenzyme A exchange activity, probably by causing CO to bind more tightly to the A-cluster. Taken together, these results indicate a significant CO2-dependent conformational change affecting the properties of all three clusters and both subunits. Since the enzyme operates in vivo in a CO2 environment, the CO2-induced conformation may be mechanistically important.

Acetyl Coenzyme A↗
PubMed1998

Characterization of pKa values and titration shifts in the cytotoxic ribonuclease alpha-sarcin by NMR. Relationship between electrostatic interactions, structure, and catalytic function.

The electrostatic behavior of titrating groups in alpha-sarcin was investigated using 1H NMR spectroscopy. A total of 209 chemical shift titration curves corresponding to different protons in the molecule were determined over the pH range of 3.0-8.5. Nonlinear least-squares fits of the data to simple relationships derived from the Henderson-Hasselbalch equation led to the unambiguous determination of pKa values for all glutamic acid and histidine residues, as well as for the C-terminal carboxylate and most of the aspartic acids in the free enzyme. The ionization constants of catalytically relevant histidines, His50 and His137, and glutamic acid, Glu96, in the alpha-sarcin-2'-GMP complex were also determined. The pKa values of 15 ionizable groups (C-carboxylate, six aspartic acids, four glutamic acids, and four histidines) were found to be close to their normal values. On the other hand, a number of side chain groups, including those in the active center, showed pKa values far from their intrinsic values. Thus, the pKa values for active site residues His50, Glu96, and His137 were 7.7, 5.2, and 5.8 in the free enzyme and 7.6, approximately 4.8, and 6.8 in the alpha-sarcin-2'-GMP complex, respectively. The pKa values and the activity profile against ApA, as a function of pH, are in agreement with the proposed enzymatic mechanism (in common with RNase T1 and the family of the microbial ribonucleases), in which Glu96 and His137 act as a general base and general acid, respectively. In almost all microbial ribonucleases, a Phe-His interaction is present, which affects the pKa of one of the His residues at the active site (His137). The absence of this interaction in alpha-sarcin would explain the lower pKa value of this His residue, and provides an explanation for the decreased RNase activity of this protein as compared to those of other microbial ribonucleases.

Aspergillus↗
PubMed2006

Electrohydrodynamic properties of succinoglycan as probed by fluorescence correlation spectroscopy, potentiometric titration and capillary electrophoresis.

The electrostatic, hydrodynamic and conformational properties of aqueous solutions of succinoglycan have been analyzed by fluorescence correlation spectroscopy (FCS), proton titration, and capillary electrophoresis (CE) over a large range of pH values and electrolyte (NaCl) concentrations. Using the theoretical formalism developed previously for the electrokinetic properties of soft, permeable particles, a quantitative analysis for the electro-hydrodynamics of succinoglycan is performed by taking into account, in a self-consistent manner, the measured values of the diffusion coefficients, electric charge densities, and electrophoretic mobilities. For that purpose, two limiting conformations for the polysaccharide in solution are tested, i.e. succinoglycan behaves as (i) a spherical, random coil polymer or (ii) a rodlike particle with charged lateral chains. The results show that satisfactory modeling of the titration data for ionic strengths larger than 50 mM can be accomplished using both geometries over the entire range of pH values. Electrophoretic mobilities measured for sufficiently large pH values (pH > 5-6) are in line with predictions based on either model. The best manner to discriminate between these two conceptual models is briefly discussed. For low pH values (pH < 5), both models indicate aggregation, resulting in an increase of the hydrodynamic permeability and a decrease of the diffusion coefficient.

Biocompatible Materials↗
PubMed2004

Computational titration analysis of a multiprotic HIV-1 protease-ligand complex.

A new computational method for analyzing the protonation states of protein-ligand complexes with multiple ionizable groups is applied to the structurally characterized complex between the peptide Glu-Asp-Leu and HIV-1 protease. This complex has eight ionizable groups at the active site: four from the ligand and four Asp residues on the protein. Correlation, with an error of ca. 0.6 kcal mol-1, is made between the calculated titration curve and the experimental titration curve. The analysis suggests that between four and five of the eight ionizable groups are protonated at the pH of crystallization.

Binding Sites↗
PubMed2004

Direct determination of thiol pKa by isothermal titration microcalorimetry.

Knowledge of the acid dissociation constant (pKa) of a molecule is a critical step toward understanding its structure and reactivity. Current methods for pKa measurement, including electrochemical, spectroscopic, and spectrophotometric titrations, have proven to be useful but also have significant limitations. To overcome these limitations, we report the use of isothermal titration calorimetry (ITC) as a new method for pKa determination. We demonstrate by the measurement of the pKa values for free cysteine, glutathione, and a cysteine residue in a protein that this method is rapid and accurate.

Binding Sites↗
PubMed2006

Monitoring lipid membrane translocation of sodium dodecyl sulfate by isothermal titration calorimetry.

We establish high-sensitivity isothermal titration calorimetry (ITC) as a fast, reliable, and versatile tool for assessing membrane translocation of charged compounds. A combination of ITC uptake and release titrations can discriminate between the two extreme cases of half-sided binding and complete transbilayer equilibration on the experimental time scale. To this end, we derive a general fit function for both assays that allows for incorporation of different membrane partitioning models. Electrostatic effects are taken into account with the aid of Gouy-Chapman theory, thus rendering uptake and release experiments amenable to the investigation of charged solutes. This is exemplified for the flip-flop of the anionic detergent sodium dodecyl sulfate (SDS) across the membranes of 100-nm-diameter unilamellar vesicles composed of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) in aqueous solution (10 mM phosphate buffer, 154 mM NaCl, pH 7.4). If repulsive electrostatic forces are accounted for adequately, SDS binding to POPC membranes can be evaluated on the basis of ideal mixing in all phases. At 25 degrees C, the intrinsic partition coefficient between the interfacial aqueous phase and the membrane amounts to 3.5 x 10(6); however, detergent flip-flop is negligibly slow under these conditions. Raising the temperature to 65 degrees C lowers the intrinsic partition coefficient to 1.4 x 10(6) but enables rapid transbilayer distribution of the detergent and, therefore, binding to or desorption from both membrane leaflets. Thus, combining a surface partition equilibrium with simple electrostatic theory appears highly useful in monitoring transmembrane movement of ionic compounds by ITC, thereby eliminating the need for specific reporter groups.

Calorimetry↗
PubMed2002

Use of 9-methylfluorene as an indicator in the titration of common group IA and group IIA organometallic reagents.

9-Methylfluorene was tested as an indicator in the titration of commonly used organometallic reagents. This indicator is readily prepared in three steps from fluorenone. In THF solution the deprotonated indicator is red and exhibits a sharp endpoint. The highly basic reagents sec-butyllithium and tert-butyllithium can be titrated in ether solution, where the color of the deprotonated indicator is yellow.

Journal Article↗
PubMed2005

Optimizing experimental parameters in isothermal titration calorimetry.

In isothermal titration calorimetry, the statistical precisions with which the equilibrium constant (K) and reaction enthalpy (DeltaH degrees ) can be estimated from data for 1:1 binding depend on a number of quantities, key among them being the products c identical with K[M](0) and h identical with DeltaH degrees [M](0), the stoichiometry range (R(m)(), ratio of total titrant X to total titrate M after the last injection), and the number of injections of titrant. A study of the statistical errors as functions of these quantities leads to the following prescription for optimizing throughput and precision: (1) Make 10 injections of titrant. (2) Set the concentrations in accord with the empirical equation R(m)() = 6.4/c(0.2) + 13/c (but no smaller than 1.1). (3) Make the starting concentration [M](0) as large as possible within the large-signal limits of the instrumentation but limited to c < 10(3) for estimating K. With this procedure, both K and [M](0) are predicted to have relative standard errors <1% over large ranges of K. Systematic errors in the concentrations, [X](0) and [M](0), are fully compensated by the "site number" or stoichiometry parameter (n). On the other hand, altering and freezing any of the fit parameters leads to a deterioration of the fit quality and to predictable changes in the other parameters. Fit divergence at very small c is avoidable through a simple redefinition of the fit parameters; however, unless n can be fixed from other information, DeltaH degrees may be statistically ill-defined in this region.

Journal Article↗
PubMed2006

Binding of 8-anilinonaphthalene sulfonate to dimeric and tetrameric concanavalin A: energetics and its implications on saccharide binding studied by isothermal titration calorimetry and spectroscopy.

The binding of 8-anilinonaphthalene sulfonate to concanavalin A has been investigated. Isothermal titration calorimetry (ITC) and circular dichroism studies have been performed under different experimental conditions to understand the binding quantitatively and evaluate contributions of different forces responsible for it. Isothermal titration calorimetric results of concanavalin A with ANS at pH 5.2 and 2.5, where it exists as a dimer, indicated binding heterogeneity and two classes of noninteracting sites. Enhancement of the binding constants from native to pH 2.5 suggests that the ANS binding is strongly influenced by the protein charge and the favorable alteration in the structure of concanavalin A as suggested by near-UV CD results. No binding was observed with the tetrameric form of concanavalin A, indicating shielding of sites due to dimerization of canonical dimers. The results have also demonstrated existence of a hydrophobic binding site that is distinct from the saccharide binding site.

Anilino Naphthalenesulfonates↗
PubMed2005

Interactions of Humicola insolens cutinase with an anionic surfactant studied by small-angle neutron scattering and isothermal titration calorimetry.

The interaction of cutinase from Humicula insolens (HiC) and sodium dodecyl sulfate (SDS) has been investigated by small-angle neutron scattering (SANS) and isothermal titration calorimetry (ITC). The concerted interpretation of structural and thermodynamic information for identical systems proved valuable in attempts to elucidate the complex modes of protein-detergent interaction. Particularly so at the experimental temperature 22 degrees C, where the formation of SDS micelles is athermal (deltaH = 0), and the effects of protein-detergent interactions stand out clearly in the thermograms. It was found that the effect of SDS on cutinase depended strongly on the sample composition. Thus, addition of SDS corresponding to a molar ratio, n(s) = n(SDS)/n(HiC) of about 10, was associated with the formation of HiC/SDS aggregates, which include more than one protein molecule. The SANS results suggested that on the average such adducts contained two HiC, and the ITC traces showed that they form and break down slowly. At slightly higher SDS concentrations (n(s) = 10-25) these "dimers" dissociated, and the protein denatured. The denaturation showed the characteristic positive enthalpy change, but the SDS denatured state of HiC was unusually compact with a radius of gyration close to that of the native conformation. Further titration with SDS was associated with exothermic binding to the denatured protein until the saturation point at about n(s) = 90. At this point, the free monomer concentration was 2.2 mM and the binding number was approximately 40 SDS/HiC. Interestingly, this degree of SDS binding (approximately 0.5 g of SDS/g of HiC) is less than half the amount bound to typical water-soluble proteins.

Ascomycota↗
PubMed2005

Analysis of the interfacial properties of fibrillated and nonfibrillated oral streptococcal strains from electrophoretic mobility and titration measurements: evidence for the shortcomings of the 'classical soft-particle approach'.

Chemical and structural intricacies of bacterial cells complicate the quantitative evaluation of the physicochemical properties pertaining to the cell surface. The presence of various types of cell surface appendages has a large impact on those properties and therefore on various interfacial phenomena, such as aggregation and adhesion. In this paper, an advanced analysis of the electrophoretic mobilities of fibrillated and nonfibrillated strains (Streptococcus salivarius HB and Streptococcus salivarius HB-C12, respectively) is performed over a wide range of pH and ionic strength conditions on the basis of a recent electrokinetic theory for soft particles. The latter extends the approximate formalism originally developed by Ohshima by solving rigorously the fundamental electrokinetic equations without restrictions on the bacterial size, charge, and double layer thickness. It further allows (i) a straightforward implementation of the dissociation characteristics, as evaluated from titration experiments, of the ionogenic charged groups distributed throughout the bacterial cell wall and/or the surrounding exopolymer layer and (ii) the inclusion of possible specific interactions between the charged groups and ions from the background electrolyte other than charge-determining ions. The theory also enables an estimation of possible swelling/shrinking processes operating on the outer polymeric layer of the bacterium. Application of the electrokinetic model to HB and HB-C12 clearly shows a significant discrepancy between the amount of surface charges probed by electrophoresis and by protolytic titration. This is ascribed to the specific adsorption of cations onto pristine charged sites in the cell wall. Physicochemical parameters pertaining to the hydrodynamics (softness degree) and electrostatics of the bacterial cell wall (HB-C12) and soft polymeric layer (HB) are quantitatively derived.

Bacterial Adhesion↗
PubMed2006

Probing the surface of polymer colloids by conductometric surfactant titration.

This work revisits the use of surfactant titrations for the characterization of latex particle surfaces. Experiments were performed to study the effect of comonomer composition and the effect of acid comonomers, and the technique is applied to the characterization of particle morphology in composite latices for several different systems. It is confirmed that the packing density of surfactant on a polymer surface is a linear function of copolymer composition. Inclusion of acid comonomers has the expected effect of decreasing the amount of surfactant adsorbed on the polymer surfaces. The usefulness of the technique in the determination of particle morphology is demonstrated, in particular toward the detection of thin layers of either seed or second-stage polymer on the particle surface which are not easily detected by other techniques such as transmission electron microscopy (TEM). Finally, it is shown that the use of acid comonomers in composite particles greatly reduces the usefulness of the surfactant titration technique for morphology characterization. A possible explanation for this effect is proposed.

Journal Article↗