Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Polyhydroxybutyrates”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45Linked to original sources
PubMed1998

The phbC (poly-beta-hydroxybutyrate synthase) gene of Rhizobium (Sinorhizobium) meliloti and characterization of phbC mutants.

Defined insertion mutations have been constructed in the Rhizobium (Sinorhizobium) meliloti phbC gene, which encodes poly-beta-hydroxybutyrate (PHB) synthase. The locus was isolated and subcloned from a genomic library of R. meliloti Rm1021 by complementation of phbC mutation of Alcaligenes eutrophus. PHB production was detected in wild-type R. meliloti under nutrient-limited conditions but not in rich medium. No PHB production was detected in the R. meliloti phbC mutants. The DNA sequence of the R. meliloti phbC gene was determined. The deduced polypeptide sequence is homologous to previously identified PhbCs from other bacteria. The R. meliloti phbC locus maps to pRmeSU47a, the smaller of the two megaplasmids in this strain.

Acetonitriles↗
PubMed2000

Growth of L929 cells on polymeric films prepared by Langmuir-Blodgett and casting methods.

The growth and spreading of fibroblast, L929 cells, on various polymeric films prepared by the Langmuir-Blodgett (LB) and casting methods were investigated. L929 cells, which were cultivated on collagen and synthetic polymeric films prepared by the LB method, adhered and spread much more than those on synthetic films prepared by the casting method. This is explained by the fact that cell growth and cell spreading are suitable for L929 cells on the films having serum proteins that contain a high alpha-helix content, because LB films adsorbed those serum proteins estimated from the circular dichroism measurements of the films immersed in cell culture medium. An exponential relationship was observed from the plot of the cell density vs root mean square of roughness of the films, which is estimated by atomic force microscopy, whereas a linear relationship was observed from the plot of the spreading ratio vs the root mean square of roughness. It is suggested that the correlation between the cell growth or spreading ratio and surface roughness of the films where L929 cells were cultivated is considered to be more important than the correlation between the cell growth or spreading ratio and the contact angle of the films.

Animals↗
PubMed2001

Water-soluble L-alanine and related oligopeptide conjugates with poly[(R,S)-3-hydroxybutanoic acid] oligomers, synthesis and structural studies by means of electrospray ionization multistage mass spectrometry.

The reactions of (R,S) beta-butyrolactone with L-alanine and related oligopeptides (Ala-Ala-Ala) were investigated. The resulting water-soluble oligomers were composed of poly[(R,S)-3-hydroxybutanoic acid] (a-PHB) covalently conjugated to L-alanine and Ala-Ala-Ala oligopeptide. The other chain end was of the carboxylic acid type. The structure of the obtained oligomers was assessed by electrospray ionization multistage mass spectrometry (ESI-MSn) and the respective structural information was completed by IR, NMR, and GPC analyses. The molecular weight and structure of the products could be controlled through reaction conditions. Using this new synthetic approach. a-PHB oligomers with well-defined end groups, as well as respective block copolymers, can be prepared via regioselective ring-opening oligomerization of (R,S) beta-butyrolactone induced by amino acids under their zwitterionic form.

3-Hydroxybutyric Acid↗
PubMed2001

Biodegradable polyhydroxyalkanoate implants for osteomyelitis therapy: in vitro antibiotic release.

Various random copolyesters of 3-hydroxybutyrate and 3-hydroxyvalerate (PHBV) and 3-hydroxybutyrate and 4-hydroxybutyrate P(3HB-4HB) were used in the construction of biodegradable, implantable rods for the local delivery of antibiotics (Sulperazone and Duocid) in chronic osteomyelitis therapy. Drug loading, type of active agent, and additional coating of the implant surface all have significant contributions to the in vitro release profile. The rate and duration of Sulperazone release from P(3HB-4HB) rods were controlled by the polymer/drug ratio (drug loading). The rate of drug dissolution was substantially higher than that of polymer degradation. Therefore, the release phenomenon was more dependent on drug dissolution rather than on polymer degradation or diffusion. Coating rods with the same type of polymer substantially reduced the initial burst effect observed with the uncoated rods, and significantly decreased the release rate so that the release kinetics became almost zero order. Antibiotic release from coated rods was sustained for over a period of 2 weeks at a constant rate, whereas uncoated rods released their contents in less than a week. Impregnation of Duocid into the hydrophobic polymer matrix yielded a rod with a smoother surface topography. The release from these rods was significantly higher than for rods loaded with Sulperazone and a zero order release could not be obtained with these samples.

Ampicillin↗
PubMed2004

Capillary zone electrophoresis as a tool to monitor the last stages of the degradation of water-sensitive polymers.

In order to monitor the formation of the water-soluble by-products from chain-scission of degradable polymers used in the biomedical field, four capillary electrophoresis methods are discussed with the aim of giving the limits and performance for each. Three of them (electroosmotic flow reversal by dynamic adsorption of a polycation, multilayer polyelectrolyte coatings and physical binding of polyethylene oxide) are based on the use of dynamic coatings onto the inner surface of a fused silica capillary, a simple means to adapt performance to specific separations via modification and control of the electroosmotic flow of fused capillary. Using oligomers of lactic acid considered as standards the methods are compared. Other examples of ester-containing macromolecules (poly(hydroxybutyrate)), as well as degradable polyanions are described, namely N-acetylneuraminate polymer and poly(beta-malic acid).

Biodegradation, Environmental↗
PubMed2005

Novel biodegradable films and scaffolds of chitosan blended with poly(3-hydroxybutyrate).

In order to develop a novel biomaterial, films of chitosan blended with poly(3-hydroxybutyrate) (PHB) were prepared by an emulsion blending technique and their properties were characterized. Scanning electron microscopy (SEM) showed that PHB microspheres were formed and were entrapped in chitosan matrices, which made the film surface rough. With increasing PHB content, the roughness of the film surface increased, while the swelling capability of the films decreased. In a wet state, the blended films exhibited a lower elastic modulus, a higher elongation-at-break and a higher tensile strength compared with chitosan films. Cell-culture experiments revealed that the blended films had better cytocompatibility than chitosan films. To explore the potential application of the blended material in tissue engineering, the porous blended scaffolds were fabricated and their pore morphology was observed by SEM. The results revealed that not only pore structure but also pore wall morphology of the blended scaffolds could be controlled by selecting the parameters of the fabrication process. These advantageous properties indicate that the blended chitosan/PHB material is promising for tissue engineering applications.

Absorbable Implants↗
PubMed2005

Properties of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) films modified with polyvinylpyrrolidone and behavior of MC3T3-E1 osteoblasts cultured on the blended films.

A series of composite films of poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBHHx) modified with polyvinylpyrrolidone (PVP) was prepared by varying the ratio of constituents, and their properties and cytocompatibility were evaluated. The hydrophilicity of the blended materials surfaces increased and the amounts of fibronectin and laminin adsorbed on the materials surface increased remarkably compared with PHBHHx. FT-IR spectra of the blended films showed a new band, implying that a surface physical interpenetrating network structure had formed. Scanning electron microscopy showed that there were dense pits and holes on the blended films surface. For the films of PHBHHx with 20 wt% and 40 wt% PVP, MTT assay indicated that PVP enhanced cell adhesion and proliferation, but that the effects were impaired by excessive PVP. The results suggested that proper addition of PVP increased the cytocompatibility of PHBHHx because the material surface had increased hydrophilicity and presented an appropriate morphology.

3-Hydroxybutyric Acid↗
PubMed2005

Hydroxyapatite reinforced poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) based degradable composite bone plate.

Poly(3-hydroxybutyrate) (P3HB), its co-polymers with 3-hydroxyvalerate (HV) (PHBV8 and PHBV22), and their hydroxyapatite (HAp) containing composites (5 and 15%, w/w) were prepared by injection molding. PHBV bone plates with low valerate contents and 15% (w/w) HAp appear to have better mechanical properties than the others. Flexural strengths of 15% (w/w) HAp-loaded P3HB, PHBV8 and PHBV22 were 78.28, 63.45 and 39.38 MPa, respectively. Tensile strengths of 15% (w/w) HAp-loaded P3HB, PHBV8 and PHBV22 were 18.99, 15.44 and 11.02 MPa, respectively. For the ageing test, bone plates were incubated in phosphate-buffered saline PBS (0.1 M, pH 7.4) at 37 degrees C and at pre-determined time points they were removed and subjected to a three-point bending test. Incubation in PBS caused a sharp decrease in the mechanical properties within the first 24 h, followed either by a gradual decrease or no change for a period of about 1 month. SEM results showed that there was no significant material erosion in the 4-week incubation period. P3HB loaded with 15% HAp appeared to yield the most suitable bone plate, insofar as mechanical properties are concerned with potential for further testing in vivo.

Biocompatible Materials↗
PubMed1992

A new hydrophilic polymer for biomaterial coatings with low protein adsorption.

BIOPOL polyurethane polymers, an extension of the HYPOL Polymer series of foamable hydrophilic polymers, have been developed which exhibit improved performance for selected biomedical applications. Members of the BIOPOL polyurethane polymer series, with molecular weights in the range of 7000 to 30,000, are larger molecules than HYPOL polymers (MW less than 3000) and produce hydrogels, rather than foams, when mixed with water. The prototype material in this series, BIOPOL XP-5, is a liquid prepolymer which chain extends in water and forms a hydrogel which can contain greater than 85% water. The time required for polymerization with water was dependent on the prepolymer: water ratio. This prepolymer was coated onto silica and medical grade tubing and then cured in place with water to form a stable coating which was resistant to non-specific protein binding. In addition, soluble, isocyanate-free forms of the prepolymer were tested for toxicity and shown to produce no adverse effects when injected intravenously into mice or when applied to a chicken chorioallantoic membrane. BIOPOL polymers can be useful in applications where protein adsorption is an undesirable event.

Adsorption↗
PubMed1997

Fabrication of microspheres using blends of poly(ethylene adipate) and poly(ethylene adipate)/poly(hydroxybutyrate-hydroxyvalerate) with poly(caprolactone): incorporation and release of bovine serum albumin.

Spherical microspheres composed of polymer blends 80:20 PEAD/PCL II and 40:40:20 PEAD/P(HB-HV)/PCL II containing a range of BSA loadings have been fabricated using a single emulsion technique with solvent evaporation. 80:20 PEAD/PCL II microspheres had smooth surfaces while 40:40:20 PEAD/P(HB-HV)/PCL II microspheres consisted of a mixture of smooth surfaced, microporous and macroporous microsphere fractions. Irrespective of fabrication polymer, microspheres were produced in high yield (> 75%) and BSA incorporation had no significant effect on microsphere size distribution which ranged from 0.6 to 5 microns and from 2.1 to 50 microns for 80:20 PEAD/PCL II and 40:40:20 PEAD/P(HB-HV)/PCL II microspheres, respectively. The loss of BSA by partitioning into the aqueous phase resulted in low encapsulation efficiencies (< 14.5%). BSA release increased significantly with the-oretical percentage loading but the relationship could not be confirmed when the total cumulative release of BSA was expressed as a percentage of the actual total BSA incorporated. Significant BSA release could be detected for up to 26 days.

Animals↗
PubMed1998

Adsorption of albumin, collagen, and fibronectin on the surface of poly(hydroxybutyrate-hydroxyvalerate) (PHB/HV) and of poly (epsilon-caprolactone) (PCL) films modified by an alkaline hydrolysis and of poly(ethylene terephtalate) (PET) track-etched membranes.

The effect of alkaline hydrolysis on several surface properties of poly(hydroxybutyrate-hydroxyvalerate) (92/8) (PHB/HV) and poly(epsilon-caprolactone) (PCL) films and of poly(ethylene terephtalate) (PET) track-etched membranes have been characterized, as well as the adsorption of three proteins normally encountered by mammalian cells in vivo, namely albumin, collagen, and fibronectin. The water contact angle decreases and the number of -COOH functions accessible to a chemical reaction at the surface of PCL increases with alkaline hydrolysis. Analysis by atomic force microscopy pictures reveals a change in surface morphology. The modifications of surface properties are correlated with a two times increase of the adsorption of three radiolabelled proteins. The hydrolysis results in a slight increase in the water contact angle of one face of the PHB/HV film and a sharp increase in the number of -COOH functions. Important morphology changes are also induced. The adsorption of the radiolabelled proteins is almost 100 times higher on the hydrolyzed polymer than on the native surface. The increase in hydrophilicity of different PET batches correlates to an increase in the number of -COOH functions. Nevertheless, the surface chemical composition and rugosity are constant and no significant difference in the amount of radiolabelled fibronectin adsorbed on the different surfaces is detectable. In conclusion, the effect of hydrolysis on the surface properties of each of the polyesters studied as well as the proteins adsorption on the different surfaces are different. The results strongly support the hypothesis that, in the system studied, parameters other than hydrophilicity influence protein adsorption: the main parameters that might play a role are the total surface area accessible to the proteins, as well as the surface chemical composition.

Adsorption↗
PubMed2004

Natural and synthetic polyesters for musculoskeletal tissue repair: experimental in vitro and in vivo evaluations.

Two natural Biopol polyesters, containing 8% (D400G) and 12% (D600G) of hydroxyvalerate component, and a synthetic polyester based on 1,4 cyclohexanediol [Poly(cyclohexyl-sebacate)--PCS] were studied to investigate their in vitro and in vivo behavior for application in musculoskeletal tissue repair. The polyesters were placed in direct contact with L929 fibroblasts and cell proliferation (WST-1), cytotoxic effect (LDH), synthetic activity (total proteins) and cytokine production (IL-1beta, IL-6, TNFalpha) were assessed after an incubation period of 72 hours and 7 days. Then, 12 Sprague-Dawley rats underwent dorsal subcutaneous implants of tested polyesters under general anesthesia. After 1 and 4 weeks from surgery, the animals were pharmacologically euthanized and the implants retrieved with surrounding tissue for histologic and histomorphometric investigations. In vitro results showed that D600G behaved a little worse in comparison to other tested polyesters in terms of cell proliferation and TNFa at 7 days. PCS presented the lowest total protein value at 7 days. In vivo results indicated that PCS implants produced a higher (p < 0.01) extent of inflammatory tissue in comparison to D600G at 1 week and to D400G at 4 weeks, and the lowest vascular densities at both experimental times. D400G seems to be the most suitable material for biomedical application when tested in fibroblast cultures and in the subcutaneous tissue of rats.

Animals↗
PubMed1992

[Effect of morphological properties on drug release from biodegradable microspheres].

The morphological properties of poly(beta-hydroxybutyric acid) (PHB) or poly(L-lactic acid) microspheres loading flomoxef sodium (FMOX) were investigated with regard to FMOX release. The release profiles of FMOX from the microspheres could be divided into two types, a sustained release type and a burst one. Two representative PHB microspheres, the release profiles of which were quite different from those of FMOX, were compared in detail from a morphological point of view. The shapes of their surfaces and sections were observed by using scanning electron microscopy (SEM), and FMOX distribution was analyzed by using electron probe microanalysis. The crystallinity of polymers was further measured by powder X-ray diffratometry. There was little difference in the FMOX distribution and their microscopic properties such as sphere size, specific surface area, shape of surface and section. In contrast, water penetration into the inside of the microspheres was found to be clearly different by use of cryogenic SEM. A significant difference was also observed in the crystallinity of polymers forming the microspheres. The release of FMOX from the microspheres was affected by the crystallinity of polymers forming the microspheres, and burst phenomena occurred in case the polymer was highly crystallized. It was speculated that the crystallization of polymer induced micro voids in the microspheres which functioned as channels for water penetration.

Biodegradation, Environmental↗
PubMed2006

Characterization of two 3-hydroxybutyrate dehydrogenases in poly(3-hydroxybutyrate)-degradable bacterium, Ralstonia pickettii T1.

Two D-(-)-3-hydroxybutyrate (3HB) dehydrogenases, BDH1 and BDH2, were isolated and purified from a poly(3-hydroxybutyrate) (PHB)-degradable bacterium, Ralstonia pickettii T1. BDH1 activity increased in R. pickettii T1 cells grown on several organic acids as a carbon source but not on 3HB, whereas BDH2 activity markedly increased in the same cells grown on 3HB or PHB. To examine their biochemical properties, bdh1 and bdh2 were cloned and overexpressed in Escherichia coli, and their purified products were characterized. The kinetic parameters indicate that BDH1 is more suitable for converting acetoacetate to 3HB than BDH2, whereas BDH2 is more efficient for the reverse reaction than BDH1. Thus, R. pickettii T1 contains two BDHs with different biochemical properties and physiological roles: BDH1 for cell growth on organic acids other than 3HB and BDH2 for cell growth on 3HB or PHB.

Biodegradation, Environmental↗
PubMed2006

Production and characterization of biodegradable terpolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-4-hydroxybutyrate) by Alcaligenes sp. A-04.

The production of the terpolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-4-hydroxybutyrate), P(3HB-co-3HV-co-4HB), by Alcaligenes sp. A-04 was investigated to determine the superior biodegradable polymer properties over those of poly(3-hydroxybutyrate), P(3HB), and its copolymers. The highest terpolymer content of 68% (w/w) was produced by Alcaligenes sp. A-04 at 60 h by shake-flask cultivation. The terpolymer with 93 mol% 4HB mole fraction units was produced when the cultivation time was extended to 96 h. Moreover, it was found that Alcaligenes sp. A-04 could utilize 1,4-butanediol for the synthesis of 3HB and 4HB monomers as well as the sodium salt of 4-hydroxybutyrate. The terpolymer content was 30% (w/w) and the composition was P(33%3HB-co-16%3HV-co-51%4HB). Next, terpolymers with 4HB mole fraction units ranging from 50 to 90 mol% were produced by varying the medium composition and cultivation time. The thermal and mechanical properties of the resulting terpolymers were different from those of the copolymers with a similar mole fraction of monomer units. The terpolymer P(4%3HB-co-3%3HV-co-93%4HB) showed an elongation of 430%, a toughness of 33 MPa, and Young's modulus of 127 MPa similar to those of low-density polyethylene. The terpolymer P(11%3HB-co-34%3HV-co-55%4HB) showed Young's Modulus of 618 MPa similar to that of polypropylene.

Alcaligenes↗