Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Polyacrylamides”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 811 records · Page 45Linked to original sources
PubMed1998

Normal and anomalous electrophoretic behavior of polymerase chain reaction-based DNA polymorphisms in polyacrylamide gels.

The electrophoretic mobility of five single tandem repeats (STRs) and four amplified fragment length polymorphisms (AFLPs) in polyacrylamide gels was tested under denaturing and nondenaturing conditions. Relative anomalous mobility in nondenaturing conditions was found in one AT-rich AFLP (3'ApoB) and in two AT-rich STRs (HUMACTBP2 and HUMF13A1). In these cases, highly anomalous electrophoretic behavior was found even when changes were made in the %T value alone. In such cases typing results were affected by the gel composition. The mobility of these systems was nevertheless normal under denaturing conditions. As a consequence of this study, we recommended that the typing of these systems should only be performed under denaturing conditions and we also recommend the further study of the electrophoretic behavior of repetitive DNA polymorphisms, especially AT-rich systems, before they are used in forensic or genetic applications.

Acrylic Resins↗
PubMed1998

Detection of enzymes active on various beta-1,3-glucans after denaturing polyacrylamide gel electrophoresis.

Enzymes were assayed for glucanase activity after denaturing sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) in gels containing beta-1,3-glucans embedded as substrate. Lentinan, curdlan, paramylon, baker's yeast alkali-insoluble glucan, baker's yeast alkali-soluble glucan and carboxymethyl (CM)-pachyman were compared to oligomeric laminarin, which is the usual substrate for assaying beta-1,3-glucanase activities. Detecting enzyme activities by aniline blue fluorescent staining was also compared with the staining of released reducing sugars by 2,3,5-triphenyltetrazolium chloride (TTC). For the nonreduced proteins, the Driselase extract exhibited one major band at 32.5 kDa and one less intense band at 23 kDa for most substrates with the two detection procedures. No Lyticase enzyme was detected in either detection procedures for all tested substrates. For barley enzymes, no activity was revealed after aniline blue staining while one undescribed 19 kDa glucanase activity was best shown after TTC staining with curdlan, paramylon and CM-pachyman as substrates. In the case of reduced proteins, the Lyticase extract yielded three bands (33, 36 and 46 kDa) on several substrates with both detection procedures. This was the same for the barley leaf extract (32, 36 and 39 kDa). The Driselase extract showed one 42 kDa band. Many enzymes active on beta-1,3-glucans are thus best revealed when proteins are denatured and reduced and when protein renaturation after SDS-PAGE involves a pH 8.0 treatment and the inclusion of 1 mM cysteine in buffers. However, some enzymes are only detected when proteins are denatured without reduction. Finally, the use of various polymeric beta-1,3-glucan substrates different from oligomeric laminarin is necessary to detect new types of enzymes such as the 19 kDa barley glucanase.

Electrophoresis, Polyacrylamide Gel↗
PubMed1998

Structural determination of N-linked carbohydrates by matrix-assisted laser desorption/ionization-mass spectrometry following enzymatic release within sodium dodecyl sulphate-polyacrylamide electrophoresis gels: application to species-specific glycosylation of alpha1-acid glycoprotein.

This paper describes a sensitive method for analysis of N-linked carbohydrates released enzymatically from within the gel following separation of glycoproteins (50-100 pmols) by sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE). The separated bands containing the glycoproteins were cut from the gel, destained, reduced and alkylated. N-linked glycans were then released by in-gel incubation with peptide N-glycosidase-F (PNGase-F) and extracted with water and acetonitrile. Sialic acid-containing glycans were converted into methyl esters by reaction with methyl iodide, salts and reagents were removed by passage through a mixed-bed column of ion-exchange resins and the glycans were examined by matrix-assisted laser desorption/ionization (MALDI)-mass spectrometry. Structural determination of the released glycans was performed by exoglycosidase digestion. Following glycan release and extraction, the protein could be digested within the gel with trypsin, and the masses of the tryptic peptides could be compared with those generated from a sequence database for protein identification. The method is applied to the analysis of N-linked glycans from alpha1-acid glycoprotein from man, cow, sheep and dog. Major species-specific differences in glycosylation were found. Thus, although all four species used N-acetyl-neuraminic acid, only cow and sheep additionally used N-glycolyl-neuraminic acid. Biantennary glycans were the predominant carbohydrates in cow, sheep and dog but man produced more triantennary glycans and a substantial amount of tetraantennary sugars. Fucosylation was only found in glycans from man and cow and both cow and sheep glycans were found to have beta1-3- and well as beta1-4-linked galactose residues in the antennae.

Amidohydrolases↗
PubMed1998

Size separation of sodium dodecyl sulfate complexes of human plasma proteins by capillary electrophoresis employing linear polyacrylamide as a sieving polymer.

Electrophoretic conditions to separate sodium dodecyl sulfate (SDS) complexes of human plasma proteins according to their size differences, by capillary electrophoresis employing linear polyacrylamide as a sieving matrix (LPA-CE), have been examined. Using the optimized separation conditions, SDS complexes of human plasma proteins not treated with reducing agents were separated into about 40 peaks and shoulders within 60 min. The molecular mass values of major peaks in a separation pattern were estimated from a plot of molecular mass and migration time for standard proteins and some of the major plasma proteins have been identified on the pattern. The electrophoretic conditions were successfully applied for the analysis of proteins in immunoglobulin G (IgG) myeloma sera.

Acrylic Resins↗
PubMed1998

Rapid fluorescent monitoring of total protein patterns on sodium dodecyl sulfate-polyacrylamide gels and western blots before immunodetection and sequencing.

The fluorogenic dye 2-methoxy-2,4-diphenyl-3(2H)-furanone (MDPF) has been used for the detection of total protein patterns on polyvinylidene difluoride (PVDF) membranes. Fluorescent staining of protein bands on membranes with this covalent dye is completed in 20 min. Wet membranes are translucent, allowing protein visualization by transillumination with ultraviolet light. The resulting images can be recorded using Polaroid film or a charge-coupled device camera. Electrophoretic bands containing 5-10 ng of protein can be detected on the MDPF-stained Western blot. When proteins are directly transferred to the membrane using a slot blotting device, as little as 0.5 ng of protein can be detected. Previous visualization of protein bands on sodium dodecyl sulfate-polyacrylamide gels with the noncovalent fluorescent dye Nile red (Alba et al., BioTechniques, 1996, 21, 625-626) does not interfere with further MDPF staining and fluorescent detection of these bands transferred to PVDF membranes. Thus, Nile red and MDPF staining can be performed sequentially, allowing the rapid monitoring of total protein patterns on both the electrophoretic gel and Western blot. Using the conditions described in this study, MDPF staining does not preclude further N-terminal microsequencing and immunodetection of specific bands with polyclonal antibodies.

Animals↗
PubMed1998

Mechanistic insights derived from retardation and peak broadening of particles up to 200 nm in diameter in electrophoresis in semidilute polyacrylamide solutions.

Rigid spherical particles in the size range of 5-200 nm diameter were subjected to capillary zone electrophoresis (CZE) in semidilute solutions of uncross-linked polyacrylamide of M(r) 5, 7 and 18 x 10(6) (PA-5, -7 and -18, respectively) of varying concentrations up to 1.6% and at field strengths varying from 68 to 270 V/cm. For all particles under study, the experimental Ferguson plots, log(mobility) vs. polymer concentration, permit a linear approximation. Their slope, the retardation coefficient KR = delta log (mobility)/delta (concentration), for particles smaller than 30 nm in diameter increased with particle size in PA-5 and -7 independently of electric field strength and polymer M(r). The KR of particles of 30 nm in diameter or more was found to be independent of particle size at the lowest field strength used but to decrease with it at the higher values of field strength. The decrease was parallel but shifted to higher values of retardation when the polymer M(r) increased from 5 to 7 x 10(6). With a decreasing ratio of average mesh size of the polymer network, zeta, to particle radius, R, the approach to "continuity" of the polymeric medium (zeta/R << 1) with both increasing particle size and polymer concentration does not result in the retardation behavior expected according to the macroscopic (bulk) viscosity of the solution. These experimental observations were hypothetically interpreted in terms of a transition to a retardation mechanism comprising the formation of a polymer depletion layer near the particle surface--polymer solution interface. Peak width exhibited an overall increase with PA-7 concentration for all particles studied. For particles of 30 nm in diameter or less, the increase was steepest when the radius of the particle was approximately commensurate with zeta at a given polymer concentration. For the largest particle, 205 nm in diameter, peak broadening with polymer concentration was found to correlate linearly with peak asymmetry. CZE of the particles in PA-18 solutions revealed abnormal behavior, with both mobility and peak width remaining near-constant up to a concentration of 0.08% and sharply declining at higher concentrations. The decline of relative mobility is the same-for the entire particle size range used, while peak width declines in direct relation to particle size.

Acrylic Resins↗
PubMed2004

A continuous-flow instrument for the determination of linear polyacrylamide stability.

Alkaline hydrolysis of high-molecular-mass (10 MDa) linear polyacrylamide, a widely used replaceable sieving medium for the capillary electrophoresis of DNA fragments and proteins, was investigated. The release rate of ammonia, a product of amide group hydrolysis, was monitored by a high-sensitivity continuous-flow system. The experimental results show a rapid onset of hydrolysis at a temperature of 70 degrees C. While the degree of 1 h hydrolysis was evaluated to reach about 16% at 70 degrees C and pH 13, it drops to 5% at 50 degrees C and pH 12.5.

Acrylic Resins↗
PubMed2002

Background-free, fast protein staining in sodium dodecyl sulfate polyacrylamide gel using counterion dyes, zincon and ethyl violet.

A background-free, fast protein staining method in polyacrylamide gel electrophoresis using an acidic dye, zincon (ZC) and a basic dye, ethyl violet (EV) is described. It is based on the counterion dye staining technique that employs two oppositely charged dyes to form an ion-pair complex in staining solution. The selective binding of free dye molecules to proteins in acidic solution produces bluish violet-colored bands. It is a rapid and end-point staining procedure, involving only fixing and staining steps that are completed in 1-1.5 h. The detection limit of this method is 8-15 ng of protein that is comparable to the sensitivity of the colloidal Coomassie Brilliant Blue G (CBBG) stain. Due to its sensitivity and speed, this stain may be more practical than any other dye-based stains for routine laboratory purposes.

Azo Compounds↗
PubMed2003

Nonconventional synthesis and characterization of ultrahigh-molar-mass polyacrylamides.

In spite of the significant progresses in the field of replaceable sieving matrices for separating DNA in capillary electrophoresis (CE), an intense research activity is still going on to improve the separation of large size DNA sequencing fragments. There are evidences, both from experimental and theoretical sides that the resolution of these fragments, at the single base, requires the use of sieving matrices comprised of long chain linear polymers. In the separation of DNA fragments by CE are of upmost importance: (i) the complete solubility of the polymer, (ii) the linearity of the chain, (iii) the achievement of ultrahigh viscosity in dilute solutions. The aim of this work is the synthesis of ultrahigh-molecular-weight polymers which possess the three requirements mentioned above by employing a nonconventional method. We demonstrate that the sieving performance of polyacrylamide is directly correlated to its intrinsic viscosity.

Acrylic Resins↗
PubMed2003

Ultrathin-layer sodium dodecyl sulfate disc electrophoresis of proteins in the range from 10 to 220 kDa in homogeneous, low-concentrated polyacrylamide gels.

This study describes an ultrathin-layer sodium dodecyl sulfate (SDS) disc electrophoresis in polyacrylamide gels of a thickness of only 150 microm. By use of 2-amino-2-methyl-1,3-propanediol/glycine instead of traditional Tris/HCl buffer in the resolving phase of the gel, proteins with a wide range of molecular sizes (10 kDa to over 220 kDa) are separated in unusually low-concentrated gels (4%T, 3.3%C). 2-Amino-2-methyl-1,3-propanediol in the resolving part of the gel contributes to stabilization of the pH value at 8.8, while glycine improves destacking as well as separation of small proteins from the bulk of stacked SDS. This method combines both the advantages of conventional slab-gel electrophoresis and capillary gel electrophoresis. It is easy to apply and well suited for all further miniaturization attempts.

Animals↗
PubMed2003

A simple polyacrylamide gel electrophoresis procedure for separation of polyamidoamine dendrimers.

A simple, inexpensive, and rapid electrophoresis technique was developed for use as a routine tool for evaluating purity of polyamidoamine (PAMAM) dendrimers. A variety of factors influencing migration of generations 0-7 dendrimers on nongradient polyacrylamide gels were evaluated. The low generation dendrimers were found to be very sensitive to diffusion during or after electrophoresis. The proposed method incorporates steps that minimize diffusion, in order to obtain improved resolution and sensitivity, especially for the lower-molecular-weight dendrimers. This was accomplished by inclusion of a dendrimer fixation step with glutaraldehyde and performing the electrophoresis separation, fixation, staining, and destaining at 4 degrees C. PAMAM dendrimer separation was studied under basic and acidic conditions. Electrophoresis under acidic conditions gave increased resolution and sensitivity over separation at alkaline pH. Oligomers and trailing generations could be clearly separated and visualized under these conditions. The smallest PAMAM dendrimer, generation 0, was visible at 1.5 microg under the optimized acidic conditions. With slight modifications, this technique should be applicable to separation of other water-soluble dendrimers.

Biocompatible Materials↗
PubMed2003

Detection of metals in proteins by means of polyacrylamide gel electrophoresis and laser ablation-inductively coupled plasma-mass spectrometry: application to selenium.

The capabilities of laser ablation-inductively coupled plasma-mass spectrometry for the detection of trace elements in a gel after gel electrophoresis were systematically studied. Figures of merit, such as limit of detection, linearity, and repeatability, were evaluated for various elements (Li, V, Cr, Mn, Ni, Cu, Zn, As, Se, Mo, Pd, Ag, Cd, Pt, Tl, Pb). Two ablation strategies were followed: single hole drilling, relevant for ablation of spots after two-dimensional (2-D) separations, and ablation with translation, i.e., on a line, relevant for one-dimensional (1-D) separations. This technique was applied to the detection of selenoproteins in red blood cells extracts after a 1-D separation (sodium dodecyl sulfate-polyacrylamide gel electrophoresis) and the detection of selenium-containing proteins in yeast after 2-D electrophoresis (2-DE). The detection procedure was further improved by using the dynamic reaction cell technology, which allowed the removal of the Ar_2(+) interference and hence the use of the most abundant Se isotope, (80)Se. Reaction gases were compared (methane, carbon monoxide, ammonia, oxygen and the combination of argon (collision gas) and hydrogen (reaction gas)). In each instance, the reaction cell parameters were optimized in order to obtain the lowest detection limit for Se (as (80)Se(+), (82)Se(+) or (77)Se(+); and as (80)Se(16)O(+), (82)Se(16)O(+) or (77)Se(16)O(+) with O(2) as the reaction gas). Carbon monoxide was found to offer the best performance. The detection limit with the use of DRC and He as transport gas was 0.07 microg Se g(-1) gel with single hole drilling and 0.15 microg Se g(-1) gel for ablation with translation.

Animals↗
PubMed2003

Highly sensitive and simple fluorescence staining of proteins in sodium dodecyl sulfate-polyacrylamide-based gels by using hydrophobic tail-mediated enhancement of fluorescein luminescence.

Fluorescein has an extremely low luminescence intensity in acidic aqueous media. However, when it was bound to proteins, subsequent increase of luminescence intensity took place. Furthermore, when a hydrophobic tail, such as aliphatic hydrocarbons, was introduced to fluorescein, more dramatic increase of luminescence intensity was observed upon binding to proteins. In the present study, by utilizing this luminescence enhancement, three hydrophobic fluorescein dyes (5-dodecanoyl amino fluorescein, 5-hexadecanoyl amino fluorescein, and 5-octadecanoyl amino fluorescein) were examined as noncovalent fluorescent stains of protein bands in sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). Effective incorporation of the dyes to proteins in gels was accomplished either simply by adding dyes at the protein fixation step, or by treating gels with a staining solution after the fixation. The sensitivity of this staining method using the fluorescein derivatives was approximately 1 ng/band for most proteins. For some cases, protein bands containing as low as 0.1 ng were successfully visualized. In addition, the detection sensitivity showed much less protein-to-protein variation than silver staining. This new staining method was also successfully applied to two-dimensional electrophoresis of rat brain proteins. Its overall sensitivity was comparable to that of silver staining.

Electrophoresis, Gel, Two-Dimensional↗
PubMed2004

Analytical and preparative native polyacrylamide gel electrophoresis: Investigation of the recombinant and natural major grass pollen allergen Phl p 2.

Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) and Western blot are amongst the most popular methods for allergen characterization, such as comparison of recombinant allergens with their natural counterparts. Native PAGE was evaluated as a possible robust and simple method offering high-resolution capacity for characterization of the major grass pollen allergen Phl p 2. Analytical separation of recombinant Phl p 2 provided a superior quality control in terms of homogeneity and, after Western blotting, immunoglobulin E (IgE) reactivity. Separation of natural Phl p 2 identified two major isoforms which were shown to have different N-terminal sequences and IgE-binding properties. After isolation using preparative native PAGE in combination with electrodialysis, both isoforms were investigated by specific proteolysis and reversed-phase high-performance liquid chromatography (RP-HPLC). The results demonstrate differences in the primary structures and that the recombinant counterpart corresponds exactly to one isoform. Analytical and preparative native PAGE thus proved to be powerful tools for the investigation of allergen isoforms and quality control of recombinant counterparts.

Allergens↗
PubMed2004

A systematic investigation into the recovery of radioactively labeled proteins from sodium dodecyl sulfate-polyacrylamide gels.

We report the results of a systematic investigation designed to optimize a method for quantifying radioactivity in proteins in sodium dodecyl sulfate-polyacrylamide gels. The method involves dissolving appropriately sized pieces of gel in hydrogen peroxide and heating to 70 degrees C overnight followed by liquid scintillation counting. H(2)O(2) had no effect on the count rates of [(14)C]bovine serum albumin (BSA) when counted in a conventional liquid scintillation system, and the count rates remained stable for several days. Temperatures below 70 degrees C resulted in incomplete extraction of radioactivity from gels containing [(14)C]BSA, but there was also a significant reduction in count rates in samples incubated at 80 degrees C. At 70 degrees C recovery was not affected by the amount of sample loaded onto the gel or by the staining procedure (Coomassie Brilliant Blue or SYPRO Ruby). Recoveries were in the range of 89-94%, and the coefficient of variation for five replicate samples was 5-10%. This method offers a reliable way of measuring the amount of radioactivity in proteins that have been separated by electrophoresis. It may be useful, for example, in quantitative metabolic labeling experiments when it is necessary to know precisely how much tracer has been incorporated into a particular protein.

Animals↗
PubMed2004

Fast visible dye staining of proteins in one- and two-dimensional sodium dodecyl sulfate-polyacrylamide gels compatible with matrix assisted laser desorption/ionization-mass spectrometry.

A fast and matrix assisted laser desorption/ionization-mass spectrometry (MALDI-MS) compatible protein staining method in one- and two-dimensional sodium dodecyl sulfate-polyacrylamide gel electrophoresis (1- and 2-D SDS-PAGE) is described. It is based on the counterion dye staining method that employs oppositely charged two dyes, zincon (ZC) and ethyl violet (EV) to form an ion-pair complex. The protocol, including fixing, staining and quick washing steps, can be completed in 1-1.5 h depending upon gel thickness. It has a sensitivity of 4-8 ng, comparable to that of colloidal Coomassie Brilliant Blue G (CBBG) staining with phosphoric acid in the staining solution. The counterion dye stain does not induce protein modifications that complicate interpretation of peptide mapping data from MS. Considering the speed, sensitivity and compatibility with MS, the counterion dye stain may be more practical than any other dye-based protein stains for routine proteomic researches.

Electrophoresis, Polyacrylamide Gel↗
PubMed2004

Moving boundaries in sodium dodecyl sulfate-polyacrylamide gel electrophoresis.

In sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), moving boundaries I-IV (Table 1) form. They migrate isotachophoretically at displacement rates that increase in the order of I to II to III. Moving boundaries IV and V comprising Pyronin-SDS as a leading constituent are retarded at high gel concentrations in comparison with the isotachophoretically migrating species. Since analytes depending on their net mobilities stack within any of those moving boundaries, previous R(f) values and Ferguson plots may have to be revised.

Buffers↗
PubMed2004

Sensitive silver staining of protein in sodium dodecyl sulfate-polyacrylamide gels using an azo dye, calconcarboxylic acid, as a silver-ion sensitizer.

A highly sensitive silver staining method for detecting proteins in sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) was developed. It is based on the silver nitrate staining method but also employs an azo dye, calconcarboxylic acid (NN), as a silver-ion sensitizer. It increases silver binding on protein bands or spots by the formation of a silver-dye complex and also increases the reducing power of silver ions to metallic silver by NN itself with formaldehyde. After a 2 h gel fixing step, the protocol including sensitization, silver-ion impregnation, and reduction steps can be completed in 1 h. The sensitivity is superior to that of silver stain with glutardialdehyde as a silver-ion sensitizer. The detection limit of NN-silver stain is 0.05-0.2 ng protein. Considering the high sensitivity without using glutardialdehyde, the NN-silver stain would be useful for routine silver staining of proteins.

Azo Compounds↗