Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “TITRATION”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44Linked to original sources

Direct measurement of protein binding energetics by isothermal titration calorimetry.

Of all the techniques that are currently available to measure binding, isothermal titration calorimetry is the only one capable of measuring not only the magnitude of the binding affinity but also the magnitude of the two thermodynamic terms that define the binding affinity: the enthalpy (AH) and entropy (AS) changes. Recent advances in instrumentation have facilitated the development of experimental designs that permit the direct measurement of arbitrarily high binding affinities, the coupling of binding to protonation/deprotonation processes and the analysis of binding thermodynamics in terms of structural parameters. Because isothermal titration calorimetry has the capability to measure different energetic contributions to the binding affinity, it provides a unique bridge between computational and experimental analysis. As such, it is increasingly becoming an essential tool in molecular design.

Calorimetry↗

Quantitative estimation of diphtheria and tetanus toxoids. 6. Use of different antibody titration methods for evaluation of immunogenicity in animals during potency assay of diphtheria toxoid.

Two diphtheria toxoid preparations were compared in potency assays in guinea-pigs using different methods for evaluation of the responses to vaccination. The methods used were the direct skin challenge (Schick test) and ELISA and VERO cell titration of antibodies. The different evaluation methods resulted in the same relative potencies between the toxoids. It was observed that when first-vaccination sera were compared with a second-vaccination serum, the relative antibody concentration depended on whether ELISA or VERO cell titration was used.

Animals↗

An active-site titration method for lipases.

A method for active-site titration of lipases has been developed based on irreversible inhibition by methyl p-nitrophenyl n-hexylphosphonate. This method was applied to five lipases displaying from minor to pronounced interfacial activation. Soluble and immobilized lipases were successfully titrated in aqueous media. A low concentration of sodium dodecyl sulfate was needed for lipases displaying pronounced interfacial activation. The carrier of some of the immobilized preparations adsorbed part of the produced p-nitrophenolate. This problem could be solved by extracting the p-nitrophenolate after inhibition. The method was extended to apolar organic solvents in the case of immobilized lipase preparations.

Binding Sites↗

Proteolysis detection in milk. IV. Starch-gel electrophoresis and formol titration.

Starch-gel electrophoresis (SGE) and formol titration methods for detecting proteolysis in cold-stored raw milk have been studied to establish their value as quality indices. When examined by SGE, the first evidence of proteolysis in raw milks stored at 5 degrees C was the formation of para-k-casein. However, this fraction could not be detected on the starch gels until the total bacterial count (TBC) exceeded 10-minus 7/ml. The SGE method appeared more reliable than the previously discussed tyrosine value method. Formol titration did not appear to have any application in the screening of cold-stored raw milks with TBC less than 10-minus 7/ml, but would detect some milks of poorer bacteriological quality.

Animals↗

Potentiometric titrations in a poly(dimethylsiloxane)-based microfluidic device.

This paper describes a microfluidic device, fabricated in poly(dimethylsiloxane), that is used for potentiometric titrations. This system generates step gradients of redox potentials in a series of microchannels. These potentials are probed by microelectrodes that are integrated into the chip; the measured potentials were used to produce a titration curve from which the end point of a reaction was measured.

Dimethylpolysiloxanes↗

On-chip titration of an anticoagulant argatroban and determination of the clotting time within whole blood or plasma using a plug-based microfluidic system.

This paper describes extending plug-based microfluidics to handling complex biological fluids such as blood, solving the problem of injecting additional reagents into plugs, and applying this system to measuring of clotting time in small volumes of whole blood and plasma. Plugs are droplets transported through microchannels by fluorocarbon fluids. A plug-based microfluidic system was developed to titrate an anticoagulant (argatroban) into blood samples and to measure the clotting time using the activated partial thromboplastin time (APTT) test. To carry out these experiments, the following techniques were developed for a plug-based system: (i) using Teflon AF coating on the microchannel wall to enable formation of plugs containing blood and transport of the solid fibrin clots within plugs, (ii) using a hydrophilic glass capillary to enable reliable merging of a reagent from an aqueous stream into plugs, (iii) using bright-field microscopy to detect the formation of a fibrin clot within plugs and using fluorescent microscopy to detect the production of thrombin using a fluorogenic substrate, and (iv) titration of argatroban (0-1.5 microg/mL) into plugs and measurement of the resulting APTTs at room temperature (23 degrees C) and physiological temperature (37 degrees C). APTT measurements were conducted with normal pooled plasma (platelet-poor plasma) and with donor's blood samples (both whole blood and platelet-rich plasma). APTT values and APTT ratios measured by the plug-based microfluidic device were compared to the results from a clinical laboratory at 37 degrees C. APTT obtained from the on-chip assay were about double those from the clinical laboratory but the APTT ratios from these two methods agreed well with each other.

Anticoagulants↗

Discontinuous equilibrium titrations of cooperative calcium binding to calmodulin monitored by 1-D 1H-nuclear magnetic resonance spectroscopy.

Calmodulin binds up to four calcium ions cooperatively in response to cellular signaling events. To understand the functional energetics of calcium activation of calmodulin, it is important to monitor individual Ca(2+)-binding sites and other positions at partial degrees of saturation. This study is the first use of 1-D proton NMR to monitor the equilibrium Ca(2+)-binding properties of calmodulin. Protein concentrations required for NMR experiments (approximately 1 mM) are approximately 1000-fold greater than the Kd values for calcium binding to calmodulin, preventing a direct continuous equilibrium titration of calmodulin. Thus, dialysates of calmodulin in buffers of experimentally determined [Ca2+]free were prepared to conduct discontinuous equilibrium titrations at both 92 and 152 mM KCl. For the C-terminal domain, the normalized area of the delta-protons of Y138 defined calcium binding isotherms. For N-terminal domain resonances (F16C delta H, T26C alpha H, D64C alpha H, and F65C delta H), the calcium-dependent change in chemical shift defined isotherms. These are the first residue-specific studies to monitor the energetics of Ca2+ binding to the N-terminal domain in wild-type holo calmodulin. Calcium binding to both domains appeared cooperative and binding affinity decreased in higher KCl. Isotherms resolved from the side chain resonances of F16 and F65 had a lower median ligand activity and a slightly higher degree of cooperativity than isotherms resolved from the backbone resonances of D64 and T26. Salt-dependent changes in apparent intradomain cooperativity differed for the domains: at higher salt, delta Gc increased for the C-terminal domain while remaining constant or decreasing for the N-terminal domain.

Amino Acid Sequence↗

Time-resolved titrations of the Schiff base and of the Asp85 residue in artificial bacteriorhodopsins.

Deprotonation/protonation processes involving the retinal Schiff base and the Asp85 residue play dominant roles in the light-induced proton pump of bacteriorhodopsin (bR). Although the pKa values of these two moieties in unphotolyzed bR are well established, the kinetics of the respective titrations in the native pigment are difficult to interpret, primarily due to the extreme (nonphysiological) pKa values of the two moieties (12.2 +/- 0.2 and 2.7, in 0.1 M NaCl, for the Schiff base and for Asp85, respectively). These difficulties are circumvented by applying stopped-flow techniques, time resolving the titrations of several artificial bRs in which the pKa values of the above two residues are substantially modified: 13-CF3 bR, pKa (Schiff base) = 8.2 +/- 0.2; 13-demethyl-11,14-epoxy bR, pKa (Schiff base) = 8.2 +/- 0.1 (in 0.1 M NaCl); aromatic bR, pKa (Asp85) = 5.2 +/- 0.1 (in water). The R82Q bR mutant, pKa (Asp85) congruent to 7.2 was also employed. A major objective was to verify whether the basic relationships of homogeneous kinetics obeyed by elementary acid/base systems in solution (primarily, the possibility to express the equilibrium constant as the ratio of the forward and back rate constants) are also obeyed by the Schiff base and Asp85 moieties. We found that this is the case for the Schiff base in the pH range between 7 and 9 but not at lower pH. These observations led to the conclusion that the Schiff base is titrable from the outside medium via a proton channel, which becomes saturated, and thus rate determining, below pH approximately equal to 7.(ABSTRACT TRUNCATED AT 250 WORDS)

Aspartic Acid↗

Titration of protein transport activity by incremental changes in signal peptide hydrophobicity.

A systematic series of mutants has been generated which provides a means for titrating the dependence of protein transport activity on signal peptide hydrophobicity. These mutants involve replacement of the hydrophobic core segment of the Escherichia coli alkaline phosphatase signal peptide while maintaining the natural amino- and carboxyl-terminal segments and the overall length. The new core regions vary in composition from 10:0 to 0:10 in the ratio of alanine to leucine residues. Thus, a nonfunctional polyalanine-containing signal peptide is titrated with the more hydrophobic residue, leucine. Using precursor processing to quantify transport activity, we observe a clear, nonlinear dependence on hydrophobicity. At ratios of alanine to leucine of less than or equal to 8:2, the signal peptide is essentially nonfunctional; at ratios greater than or equal to 3:7, the signal peptide functions efficiently. The midpoint is between alanine to leucine ratios of 6:4 and 5:5. Signal peptides with hydrophobicity just below the midpoint show substantial, additional precursor processing over time while the others do not. The data are consistent with a simple model involving a two-state equilibrium between the untransported and transported species and a change in the delta G of -0.85 kcal/mol for every alanine to leucine conversion.

Alkaline Phosphatase↗

Ca(2+)-activated myofibrillar ATPase: transient kinetics and the titration of its active sites.

The transient kinetics of rabbit psoas Ca(2+)-activated myofibrillar Mg(2+)-ATPase were studied in a buffer of near physiological ionic strength at 4 degrees C by the rapid flow quench technique. The initial ATP binding steps were studied by the ATP chase and the cleavage and release of products steps were studied by the Pi burst method. The data obtained were interpreted by the simple scheme [formula; see text] represents the myosin heads with or without actin interaction. The constants obtained with myofibrils (where the molecules are highly organized) were compared with those with myosin subfragment 1 (S1) and cross-linked acto-S1 (where the molecules are dispersed in solution). Myofibrils appear to bind ATP as tightly as do S1 and cross-linked acto-S1. This suggests that with them k-2 less than kcat much less than k2, and it is proposed that the ATP chase method can be used to titrate the ATPase sites in myofibrils. The results of titration and single-turnover experiments revealed that myofibrils may contain partially active myosin heads. It is proposed that these heads bind ATP loosely without hydrolysis, as found with S1 [Tesi, C., N. Bachouchi, N., Barman, T., & Travers, F. (1989) Biochimie 71, 363-372]. There were large Pi bursts with the three preparations, showing that with all of them the release of products step (k4) is rate limiting.(ABSTRACT TRUNCATED AT 250 WORDS)

Adenosine Triphosphate↗

Titration calorimetric and differential scanning calorimetric studies of the interactions of n-butanol with several phases of dipalmitoylphosphatidylcholine.

The interactions of n-butanol with dipalmitoylphosphatidylcholine (DPPC) were studied using titration calorimetry and differential scanning calorimetry (DSC). DSC results indicated that n-butanol induces the interdigitated phase in DPPC above 10 mg/mL butanol. A new application of titration calorimetry for measuring partition coefficients of nonsaturating solutes into lipids was developed. The partition coefficients and the heat of binding of n-butanol into DPPC were measured for the L beta', P beta', L alpha, and L beta I phases of DPPC. The partition coefficients were temperature dependent and ranged from 70 to 110 for the L beta I phase, from 170 to 183 for the L alpha phase, and similar to that for the L beta I phase in the P beta' phase. The binding to the L beta' phase could not be detected, giving an upper limit for this partition coefficient of 23. The enthalpies for binding to the L beta I and L alpha phases were 1.0 and 1.5 kcal/mol, respectively. The van't Hoff enthalpy was in good agreement with the calorimetric enthalpy for the partitioning into the L alpha phase; however, it was greater than the calorimetric enthalpy for the L beta I phase, suggesting that the interaction of n-butanol with this phase is cooperative in some way.

1,2-Dipalmitoylphosphatidylcholine↗

Structural comparison of apomyoglobin and metaquomyoglobin: pH titration of histidines by NMR spectroscopy.

Proton NMR spectroscopy was applied to myoglobin in the ferric, water-liganded form (metMbH2O) and the apo form (apoMb) to probe the structure and stability of the latter. Proteins from sperm whale and horse skeletal muscles were studied to simplify the spectral assignment task. Nuclear Overhauser effects and the response of chemical shifts to variations of pH were used as indicators of residual native holoprotein structure in the apoprotein. The investigation was focused in the histidine side chains and their environment. In metMbH2O, the resonances of all imidazole rings not interacting with the heme were assigned by applying standard two-dimensional methods. These assignments were found to differ from those reported elsewhere [Carver, J. A., & Bradbury, J. H. (1984) Biochemistry 23, 4890-4905] except for His-12, -113, and -116. Only one histidine (His-36) has a pK(a) higher than 7, two (His-48 and His-113) have a pK(a) lower than 5.5, and two (His-24 and His-82) appear not to titrate between pH 5.5 and pH 10. In the apoproteins, the signals of His-113 and His-116, as well as those of His-24, -36, -48, and -119 previously assigned in the horse globin [Cocco, M. J.. & Lecomte, J. T. J. (1990) Biochemistry 29, 11067-11072], could be followed between pH 5 and pH 10. A comparison to the holoprotein data indicated that heme removal has limited effect on the pK(a) and the surroundings of these residues. Five additional histidines which occur in the two helices and connecting loops forming the heme binding site were identified in the horse apoprotein. Four of these were found to have pK(a) values lower than that expected of an exposed residue. The NOE and titration data were proposed to reflect the fact that several holoprotein structural elements, in particular outside the heme binding site, are maintained in the apoprotein. In the heme binding region of the apoprotein structure, the low pK(a)'s suggest local environments which are resistant to protonation.

Amino Acid Sequence↗

Reaction of canine plasminogen with 6-aminohexanoate: a thermodynamic study combining fluorescence, circular dichroism, and isothermal titration calorimetry.

The thermodynamics of the binding of 6-aminohexanoate (6-AH) to dog glu-plasminogen has been studied. Fluorescence titrations revealed four binding sites. Three yielded positive fluorescence changes on ligand binding; one yielded a negative fluorescence change. The fluorescence data gave no indication of cooperative interactions. Binding was studied using circular dichroism (CD). Near 295 nm there were small changes associated with binding ligand. These were magnified at 235 nm, a wavelength that is mainly associated with tryptophan bands. The dissociation constants obtained from the fluorescence were applied to the CD data and fit quite well. Below 220 nm, there were no significant differences between samples with or without 6-AH and, therefore, no substantial change in the secondary structure of the protein. Isothermal titration calorimetry was used in combination with the binding constants from fluorescence to study the enthalpy and entropy contributions to 6-AH binding. The enthalpies of association for the four sites are all negative. Their absolute values are small for the tight sites and large for the weakest. -TDeltaS is negative for the tight sites and positive for the weakest. The binding of 6-AH to plasminogen is entropically driven for the two tightest sites and enthalpically driven for the weakest site. The binding of 6-AH to lys-plasminogen has been studied and differs slightly from binding to glu-plasminogen. Most importantly, the binding of 6-AH for the weak site goes from enthalpy- to entropy-driven as is found with the other sites.

Aminocaproic Acid↗

Thermodynamics of inhibitor binding to the catalytic site of glucoamylase from Aspergillus niger determined by displacement titration calorimetry.

The binding of different inhibitors to glucoamylase G2 from Aspergillus niger and its temperature and pH dependencies have been studied by titration calorimetry. The enzyme binds the inhibitors 1-deoxynojirimycin and the pseudo-tetrasaccharide acarbose with association constants of 3 x 10(4) and 9 x 10(11) M-1, respectively, at 27 degrees C. The binding free energy for both ligands is remarkably temperature-invariant in the interval from 9 to 54 degrees C as the result of large compensating changes in enthalpy and entropy. Acarbose and 1-deoxynojirimycin bound with slightly different free energy-pH profiles, with optima at 5.5 and 5.5-7.0, respectively. Variations in delta H degrees and T delta S degrees as a function of pH were substantially larger than variations in delta G degrees in a partly compensatory manner. Two titratable groups at or near subsite 1 of the catalytic site were found to change their pKa slightly upon binding. The hydrogenated forms of acarbose, D-gluco- and L-ido-dihydroacarbose, bind with greatly reduced association constants of 3 x 10(7) and 2 x 10(5) M-1, respectively, and the pseudo-disaccharide methyl acarviosinide, lacking the two glucose units at the reducing end compared to acarbose, has a binding constant of 8 x 10(6) M-1; these values all result from losses in both enthalpy and entropy compared to acarbose. Three thio analogues of the substrate maltose, methyl alpha- and beta-4-thiomaltoside and methyl alpha-4,5'-dithiomaltoside, bind with affinities from 3 x 10(3) to 6 x 10(4) M-1.(ABSTRACT TRUNCATED AT 250 WORDS)

1-Deoxynojirimycin↗

The conserved, buried aspartic acid in oxidized Escherichia coli thioredoxin has a pKa of 7.5. Its titration produces a related shift in global stability.

Aspartic acid 26 in Escherichia coli thioredoxin is located at the bottom of a hydrophobic cavity, near the redox-active disulfide of the active site. Asp 26 is embedded in the protein except for part of the surface of one carboxyl oxygen. The high degree of evolutionary conversion of Asp 26 suggests that it plays a critical role in thioredoxin function. We have determined the pKa of Asp 26 by a novel electrophoretic method based on the relative electrophoretic mobilities of wild-type thioredoxin and of D26A thioredoxin (with Asp 26 replaced by alanine). The pKa of Asp 26 determined by this technique is 7.5, more than 3 units above the pKa of a solvated carboxyl side chain. The titration of Asp 26 is thermodynamically linked to the stability of thioredoxin. As expected if thioredoxin stability depends on the ionization state of Asp 26, delta Go WT, the free energy of the cooperative denaturation reaction of wild-type thioredoxin by guanidine hydrochloride, varies with pH in a sigmoidal fashion in the vicinity of pH 7.5. Over the same pH range, the free energy for D26A folding, delta Go D26A, is pH independent and D26A is highly stabilized compared to wild type. From the thermodynamic cycle describing the linkage of Asp 26 titration to thioredoxin stability, the difference in free energy between wild-type thioredoxin with protonated Asp 26 and wild-type thioredoxin with deprotonated Asp 26, delta delta Go (COOH----COO-), is calculated to be 4.9 kcal/mol.(ABSTRACT TRUNCATED AT 250 WORDS)

Alanine↗

Active-site serine phosphate and histidine residues of phosphoglucomutase: pH titration studies monitored by 1H and 31P NMR spectroscopy.

1H and 31P NMR pH titrations were conducted to monitor changes in the environment and protonation state of the histidine residues and phosphoserine group of rabbit muscle phosphoglucomutase on binding of metal ions at the activating site and of substrate (glucose phosphate) at the catalytic site. Imidazole C epsilon-H signals from 8 of the 10 histidines present in the free enzyme were observed in 1H NMR spectra obtained by a spin-echo pulse sequence at 470 MHz; their pH (uncorrected pH meter reading of a 2H2O solution measured with a glass electrode standardized with H2O buffer) titration properties (in 99% 2H2O) were determined. Three of these histidine residues, which have pKa values ranging from 6.5 to 7.9, exhibited an atypical pH-dependent perturbation of their chemical shifts with a pHmid of 5.8 and a Hill coefficient of about 2. Since none of the observed histidines has a pKa near 5.8, it appears that these three histidines interact with a cluster consisting of two or more groups which become protonated cooperatively at this pH. Binding of Cd2+ at the activating site of the enzyme abolishes the pH-dependent transition of these histidines; hence, the putative anion cluster may constitute the metal ion binding site, or part of it. Two separate 31P NMR peaks from phosphoserine-116 of the phosphoenzyme were observed between pH 6 and 9. Apparently, the metal-free enzyme exists as a pH-dependent mixture of conformers that provide two different environments, I and II, for the enzymic phosphate group; the transition of the phosphate group between these two environments is slow on the NMR time scale.(ABSTRACT TRUNCATED AT 250 WORDS)

Animals↗

Energetics of cooperative protein-DNA interactions: comparison between quantitative deoxyribonuclease footprint titration and filter binding.

Using the binding of cI repressor protein to the lambda right and left operators as a model system, we have analyzed the two common experimental techniques for studying the interactions of genome regulatory proteins with multiple, specific sites on DNA. These are the quantitative DNase footprint titration technique [Brenowitz, M., Senear, D. F., Shea, M. A., & Ackers, G. K. (1986) Methods Enzymol. 130, 132-181] and the nitrocellulose filter binding assay [Riggs, A., Suzuki, H., & Bourgeois, S. (1970) J. Mol. Biol. 48, 67-83]. The footprint titration technique provides binding curves that separately represent the fractional saturation for each site. In principle, such data contain the information necessary to determine the thermodynamic constants for local site binding and cooperativity. We show that in practice, this is not possible for all values of the constants in multisite systems, such as the lambda operators. We show how these constants can nevertheless be uniquely determined by using additional binding data from a small number of mutant operators in which the number of binding sites has been reduced. The filter binding technique does not distinguish binding to the individual sites and yields only macroscopic binding parameters which are composite averages of the various local site and cooperativity constants. Moreover, the resolution of even macroscopic constants from filter binding data for multisite systems requires ad hoc assumptions as to a relationship between the number of ligands bound and the filter retention of the complex. Our results indicate that no such relationship exists. Hence, the technique does not permit determination of thermodynamically valid interaction constants (even macroscopic) in multisite systems.

Bacteriophage lambda↗

Proton nuclear magnetic resonance spectroscopy of human transferrin N-terminal half-molecule: titration and hydrogen-deuterium exchange.

The binding of Ga(III) to the proteolytically derived N-terminal half-molecule of human transferrin (HTF/2N) was studied by proton nuclear magnetic resonance spectroscopy. The pH-dependent titration curves of the histidinyl C(2) proton chemical shifts were altered upon formation of the GaIIIHTF/2N(C2O4) ternary complex. Two high-pK'a histidines failed to titrate when the metal and synergistic anion formed a complex with the protein. These results implicated two histidinyl residues as direct ligands to the metal. The rates of hydrogen-deuterium exchange for the C(2) protons of certain histidinyl residues were substantially decreased by metal ion binding. The two ligand histidines were protected from exchange, and a third, low-pK'a, histidinyl residue was protected. We propose that this third histidinyl residue is involved in anion binding and may serve as the base in the putative proton-relay scheme proposed for complex formation.

Apoproteins↗