Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Porosity”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44Linked to original sources
PubMedDate not supplied

Femoral bone adaptation to stable long-term cemented total hip arthroplasty in dogs.

OBJECTIVE: To quantify long-term bone adaptation after stable cemented total hip arthroplasty (cTHA) in dogs. STUDY DESIGN: Clinical study. ANIMALS: Fourteen dogs. METHODS: Femoral specimens were collected from client-owned dogs that were donated after death because of causes unrelated to their cTHA. Mean (+/-SEM) dog age was 11.4+/-0.7 years and implant duration was 5.3+/-0.7 years. Implant stability was established from radiographic signs and gross mechanical stability. Femurs were evaluated at 3 levels based on implant length: proximal stem (PS), mid-stem (MS), and distal to stem (DS). Cortical area, medullary area, and porosity were measured at each level. Implanted femurs were compared to contralateral nonimplanted femurs. RESULTS: Cortical area and cortical porosity were significantly increased in implanted femurs compared to nonimplanted femurs. Cortical area was increased at the MS and DS levels, and porosity was increased at the PS and MS levels in implanted femurs. Porosity was greatest in the endosteal region at the PS and MS levels in implanted femurs. CONCLUSIONS: Significant differences in femoral geometry and cortical porosity were detected after long-term stable cTHA. Net bone loss proximally and increased bone mass distally support stress shielding as a important mechanical factor associated with bone adaptation. Distribution of porosity shifts to endosteal regions after long-term cTHA. CLINICAL RELEVANCE: Significant site-specific femoral adaptation occurs in response to stable cTHA and may precede implant loosening.

Animals↗
PubMed2004

[Influence of shelterbelts structure on snow distribution pattern in shelternets in Northeast China].

The amount of snow that falls in farmland during winter in Northeast China is the important source of soil water in farmland, so the influence of shelterbelt structure on snow distribution pattern is the key problem in order to adjust structure of shelterbelts according to porosity in management practice. Based on snow depths in shelternets composed of shelterbelts with three levels of porosity, which were shelternet No. 1, shelternet No. 2, and shelternet No. 3, the snow distribution patterns in farmland were studied. The results showed that the structure of shelternet had great influence on snow distribution in farmland. With different levels of porosities, spatial pattern of snow distribution were obviously different in three shelternets. The more variant in porosity, the more obvious difference in snow distribution pattern, and the best uniformity of snow distribution appeared in shelternet with porosity of phi 2w = 0.579, phi 2s = 0.268, in which snow depth in farmland was relative even and the variability of snow depth was the least. Consequently, the relationship of porosity of shelterbelt with snow distribution pattern could be used to guide structure adjustment and optimization management of shelterbelts.

Agriculture↗
PubMed1994

Differences in osteonal micromorphology between tensile and compressive cortices of a bending skeletal system: indications of potential strain-specific differences in bone microstructure.

BACKGROUND: It has been hypothesized that bone has the capacity to accommodate regional differences in tension and compression strain mode and/or magnitude by altering its osteonal microstructure. We examined a simple cantilevered bone to determine whether regional differences in particular strain-related features are reflected in the microstructural organization of compact bone. METHODS & RESULTS: The artiodactyl (e.g., sheep and deer) calcaneus has a predominant loading condition which is typified by prevailing compressive and tensile strains on opposite cortices, and variations in strain magnitudes across each of these cortices. Microscopic examination showed osteon density and cortical porosity differences between tension (caudal) and compression (cranial) cortices, averaging 11.4% more osteons in the compression cortex (P < 0.01) and 80.2% greater porosity in the tension cortex (P < 0.01). There is 43.5% more interstitial bone in the compression cortex (P < 0.01). Osteons in the compression cortex also have smaller areas in contrast to the larger area per osteon in the tension cortex. Although no definite transcortical gradient in osteonal density or cortical porosity is found, fractional area of interstitial bone is larger and osteon population density is lowest in the endocortical regions of both tension and compression cortices. The endocortical regions also have greater porosity than their corresponding middle and pericortical regions (P < 0.01). CONCLUSIONS: These osteonal microstructure and cortical porosity differences may be adaptations related to regional differences in strain mode and/or strain magnitude. This may be related to the disparity in mechanical properties of compact bone in tension vs. compression. These differences may reflect a capacity of bone to process local and regional strain-related information.

Adaptation, Physiological↗
PubMed2006

Selection of two reliable parameters to evaluate the impact of the mobile-phase composition on capillary electrochromatography performance with monolithic and particle-packed capillary columns.

Different models have been described in the literature to evaluate the total porosity of CEC columns: gravimetric, flow as well as conductivity-based methods. In this study, these models have been compared for two kinds of CEC columns: two mixed-mode silica particle stationary phases and different monolithic columns (acrylate or polystyrene divinylbenzene-based). The total porosities measured from the conductivity-based methods were lower than the total column porosities obtained by gravimetric or flow methods for all the investigated columns while the wide distribution of observed values shows that conductivity-based methods discriminate columns more efficiently with very different properties. We propose a conductivity-based method taking into account the actual length proposed by Horvath, to evaluate what we call an "actual electrokinetic" porosity (AEP). This parameter, based on electrokinetic theory only, affords the most consistent evaluation of porosity under experimental CEC conditions for the packed- and acrylate-based monolithic columns. To illustrate the potential of AEP and actual EOF for the estimation of the performances of a CEC system (stationary and mobile phases) we studied the influence of the mobile-phase composition on these parameters for CEC separations with an ammonium embedded packed stationary phase. The AEP and the actual electroosmotic mobility should allow a better understanding of the perfusive EOF and stationary-phase wettability. For neutral compounds (substituted phenols), AEP evaluation allowed us to predict the mobile-phase conditions able to enhance the efficiency while both AEP and actual EOF had to be considered in the case of peptide analysis.

Acrylates↗
PubMedDate not supplied

Cyclic variations in the permeability of the cell wall of Saccharomyces cerevisiae.

To study cell-cycle-related variations in wall permeability of Saccharomyces cerevisiae, two approaches were used. First, an asynchronous culture was fractionated by centrifugal elutriation into subpopulations containing cells of increasing size. The subpopulations represented different stages of the cell cycle as judged by light microscopy. Cell wall porosity increased when these subpopulations became enriched with budded cells. Secondly, synchronous cultures were obtained by releasing MATa cells from alpha-factor induced G1-arrest. These cultures grew synchronously for at least two generations. The cell wall porosity increased sharply in these cultures, shortly before buds became visible and was maximal during the initial stages of bud growth. It decreased in cells which had completed nuclear migration and before abscission of the bud had occurred. The porosity reached its lowest value during abscission and in unbudded cells. We examined the incorporation of mannoproteins into the wall during the cell cycle. SDS-extractable mannoproteins were incorporated continuously. However, the incorporation of glucanase-extractable mannoproteins, which are known to affect cell wall porosity, showed cyclic oscillations and reached its maximum after nuclear migration. This coincided with a rapid decrease in cell wall porosity, indicating that glucanase-extractable mannoproteins might contribute to this decrease.

Benzenesulfonates↗
PubMed2005

Study on the effect of porous fence on air quality and traffic noise level around a double-decked road structure. Evaluation by numerical model.

Fence for traffic noise control sometimes causes adverse effect on air pollution. Thus in this study, performance of porous fence as a tool for control of both air pollution and noise pollution was evaluated. A two-dimensional numerical model for flow and pollutant concentration and an analytical model for traffic noise were utilized in the analysis of a double-decked road structure with fences only at ground (Case 1) and at both ground and upper deck (Case 2). Porous fences were assumed only at the ground level since the solid fences at the upper deck usually leads to desirable result on air pollution. Effects of the variable porosity on air quality and noise level near road were evaluated. Obtained results showed: (1) flow pattern in leeward of fence was drastically changed at 40-50% porosity in Case 1 and 50% in Case 2. The porosity larger than 40% excluded presence of a circulation behind the fence. (2) Effect of porous fence on air pollution was different in Cases 1 and 2. In Case 1, the porous fence generally resulted in the reduction of air pollution at the ground level; on the other hand, in Case 2, it rather led to increase of the concentration. (3) Traffic noise level was also largely changed by the porosity of the fence; an example of simultaneous evaluation of the effects of porous fence on both air and noise pollution in Case 1 showed that the fence of 60% porosity leads to reduction of air pollution by 20% compared with solid fence case, and reduction of noise pollution by 4-6% in dB compared with no fence case, at 1 m high and 10 m from the road.

Air Pollution↗
PubMed2006

Preparation of 3-D regenerated fibroin scaffolds with freeze drying method and freeze drying/foaming technique.

Although three-dimensional fibroin scaffolds have been prepared with freeze drying method, the porosity and pore sizes still can not satisfy the requirement of tissue engineering. In this article, fibroin porous scaffold with high porosity and > 100 microm diameter interconnected pores was firstly prepared with freeze drying method through adjusting fibroin concentration. The morphology of different scaffolds lyophilized from different fibroin concentration was observed by SEM. A novel freeze drying improved method, freeze drying/foaming technique, was also devised to prepare fibroin scaffolds at different fibroin concentrations. Using the said method, the porosity and pore size of fibroin scaffolds prepared from 12% concentration were 85.8 +/- 4% and 109 +/- 20 microm respectively with yield strength up to 450 +/- 6 KPa while the porosity and pore size of fibroin scaffolds prepared from 8% concentration were 96.9 +/- 3.6% and 120 +/- 30 microm respectively with yield strength up to 30 +/- 1 KPa. The freeze drying/foaming technique produced scaffolds with a useful combination of high yield strength, interconnected pores, and pore sizes greater than 100 microm in diameter. Through adjusting fibroin concentration and thawing time, the porosity, pore sizes and mechanical properties could be controlled to satisfy the different requirements of tissue engineering. The results suggested that fibroin scaffolds prepared with the above methods could be formed for utility in biomaterial application.

Animals↗
PubMed2006

Modeling of aqueous transport in rigid porous matrices near the percolation threshold.

PURPOSE: To demonstrate control of passive diffusion of small molecules through rigid ceramic matrices via manipulation of matrix porosity near the percolation threshold, and to model such control using percolation scaling relationships on both infinite and finite lattices. MATERIALS AND METHODS: Rigid alumina disks of controlled porosity were prepared using standard ceramic casting and sintering techniques. Structural void space distributions in sintered disks were measured by dimensional and volume displacement (pycnometry) methods. The impact of void space on transport was determined by tracking the diffusion of ionized benzoic acid across sintered disks mounted in Stokes diffusion cells. Critical percolation thresholds were estimated by fitting structural and transport-dependent results to percolation scaling relationships. Finite-size scaling studies were performed by adding polymer microspheres of known diameter to the disks to generate artificially large pores. RESULTS: Nonlinear least squares techniques were used to fit both structural and transport-dependent properties of rigid alumina disks to total disk porosity using percolation scaling relationships. The critical percolation threshold determined from structural properties (0.129) was lower than that determined from benzoic acid transport (0.169). The transport-derived percolation threshold exactly matched that expected for a tetrakaidecahedral (14 sided) lattice. Finite-size scaling was demonstrated through a nonzero effective volume fraction for transport at the percolation threshold. CONCLUSIONS: Manipulation of total disk porosity near the percolation threshold was shown to be a suitable means of controlling the transport rate of a model small molecule, while deliberate enlargement of individual pores was demonstrated to decrease this threshold without increasing total porosity. The lower-than-expected percolation threshold obtained from the structural model was ascribed to limitations of the measurement technique. The threshold determined from the aqueous transport model was concluded to represent the true threshold for this system.

Algorithms↗
PubMed1995

A case for bone canaliculi as the anatomical site of strain generated potentials.

We address the question of determining the anatomical site that is the source of the experimentally observed strain generated potentials (SGPs) in bone tissue. There are two candidates for the anatomical site that is the SGP source, the collagen-hydroxyapatite porosity and the larger size lacunar-canalicular porosity. In the past it has been argued, on the basis of experimental data and a reasonable model, that the site of the SGPs in bone is the collagen-hydroxyapatite porosity. The theoretically predicted pore radius necessary for the SGPs to reside in this porosity is 16 nm, which is somewhat larger than the pore radii estimated from gas adsorption data where the preponderance of the pores were estimated to be in the range 5-12.5 nm. However, this pore size is significantly larger than the 2 nm size of the small tracer, microperoxidase, which appears to be excluded from the mineralized matrix. In this work a similar model, but one in which the effects of fluid dynamic drag of the cell surface matrix in the bone canaliculi are included, is used to show that it is possible for the generation of SGPs to be associated with the larger size lacunar-canalicular porosity when the hydraulic drag and electrokinetic contribution of the bone fluid passage through the cell coat (glycocalyx) is considered. The consistency of the SGP data with this model is demonstrated. A general boundary condition is introduced to allow for current leakage at the bone surface. The results suggest that the current leakage is small for the in vitro studies in which the strain generated potentials have been measured.

Biomechanical Phenomena↗
PubMed2005

Morphological and topographic effects on calcification tendency of pHEMA hydrogels.

Poly(2-hydroxyethyl methacrylate) hydrogels were prepared in the presence of varying concentrations of water, or a co-monomer ethoxyethyl methacrylate at different strengths of crosslinking agent ethylene glycol dimethacrylate. Calcification tendency and its correlation with monomer mixture composition, topography and porosity of these materials were investigated. Scanning (SEM) and transmission electron microscopy (TEM) was used to study topography and porosity respectively. Calcification and calcium diffusion ability in to the hydrogels were investigated by light microscopy, SEM and energy dispersive analysis of X-rays (EDAX) after incubation of the materials in a metastable calcifying solution for 48 days. Polymer and solvent volume fractions were also studied to determine if a correlation existed between porosity and calcification. Most of the series of hydrogels showed surface irregularities. Internal structure showed evidence of a porous structure in one of the series. Calcification studies indicated diffusion of calcium ions in some of the series. The diffusion of calcium is limited to 30-40 microm in most calcified specimens. For hydrogels that exhibited substantial surface irregularities and micro channels, the infiltration of calcium up to 200 microm was observed. Attempts to detect porosity by electron microscopy failed in some of the hydrogels due to difficulty in sample processing and sectioning. However, collaboration of the results with different techniques used, indicated that surface defects are the major contributors to calcium deposition. Decrease in porosity reduces the amount of calcium deposits and infiltration with decreasing solvent volume fraction which is associated with crosslinking concentration and initial water content of the polymer.

Biocompatible Materials↗
PubMed2006

Freeze casting of hydroxyapatite scaffolds for bone tissue engineering.

Although extensive efforts have been put into the development of porous scaffolds for bone regeneration, with encouraging results, all porous materials have a common limitation: the inherent lack of strength associated with porosity. Hence, the development of porous hydroxyapatite scaffolds has been hindered to non-load bearing applications. We report here how freeze casting can be applied to synthesize porous scaffolds exhibiting unusually high compressive strength, e.g. up to 145 MPa for 47% porosity and 65 MPa for 56% porosity. The materials are characterized by well-defined pore connectivity along with directional and completely open porosity. Various parameters affecting the porosity and compressive strength have been investigated, including initial slurry concentration, freezing rate, and sintering conditions. The implications and potential application as bone substitute are discussed. These results might open the way for hydroxyapatite-based materials designed for load-bearing applications. The biological response of these materials is yet to be tested.

Bone and Bones↗
PubMed2006

Preparation of monolithic columns with target mesopore-size distribution for potential use in size-exclusion chromatography.

The main factors affecting the mesopore porosity of methacrylate-ester based monolithic columns were investigated. We prepared 40 monolithic capillary columns with porosity controlled by varying the proportions of butyl methacrylate (BMA) and ethylene dimethacrylate (EDMA) monomers and of 1,4-butanediol (BUT) and 1-propanol (PROP) as the porogen solvent in the polymerisation mixtures by thermally initiated in situ polymerisation in fused-silica capillaries. Using mixture design software, we systematically varied the composition of the polymerisation mixtures to find significant factors affecting mesopore formation. Multivariate analysis of the experimental data obtained for the fabricated columns yielded a model for prediction of the mesopore porosity in monolithic beds as a function of the composition of the polymerisation mixture used to prepare polymethacrylate monolithic capillary columns. The mean absolute deviation of predicted porosities is 0.029 for most of the columns, with only eight columns showing deviations exceeding 0.050. The main factor affecting the mesopore porosity proved to be the combination of the concentration of hydrophobic monomer (BMA) and the concentration of the less-polar solvent, 1-propanol, in the porogen mixture. The proportion of mesopores in the monolithic capillary columns increases with increasing concentration of 1-propanol and with decreasing concentration ratios of the cross-linker (EDMA) to monomer (BMA) and of BUT to PROP porogenic solvents.

Chromatography, Gel↗
PubMed2004

Analysis of formulation effects in the dissolution of ibuprofen pellets.

In this work the effects of citric acid and of two common fillers, lactose (soluble) and tricalcium phosphate (insoluble) are examined on the release profiles from pellets, using ibuprofen as a model drug with pH-dependent solubility. Also studied is the dependence of these profiles on the specific surface area, bulk density, apparent density, porosity and porosity parameters (pore size distribution, total pore surface area, mean pore diameter and pore shape), as determined by mercury intrusion porosimetry. Pellets with high porosity and total pore surface area but small median pore diameter (tricalcium phosphate pellets-IPM) are found to produce similar dissolution results to those of low porosity and low total pore surface area, but having a high median pore diameter (lactose pellets-ILM), irrespective of the solubility of excipients. Addition of citric acid causes a delay in the initial dissolution for both formulations. During dissolution, however, citric acid reduces the median pore diameter of lactose-based pellets. In contrast, in tricalcium phosphate/citric acid pellets (CIPM), this parameter increases considerably during dissolution, when compared to the IPM formulation. These findings may justify the contrasting dissolution behaviors of CIPM and CILM (lactose/citric acid) pellets, after their common behavior in the initial stages, and show that porosity and its related parameters, along with physical properties of excipients such as solubility, density and specific surface area, are helpful to predict pellet behavior in drug release profiles.

Calcium Phosphates↗
PubMed2001

Drying behaviour of two sets of microcrystalline cellulose pellets.

The objective was to study contraction and densification of two sets of microcrystalline cellulose pellets, prepared using water (W) or a 25/75% w/w water/ethanol (W/E) mixture, during drying. The pellets were dried on microscope slides, photographed and weighed at set times. The porosity of the dry pellets was determined by mercury pycnometry. From pellet size, weight and porosity data, contraction and densification of the pellets and the relationship of these to the liquid content of the pellets during drying were calculated. Both types of pellets contracted and densified during drying. The initial porosity was similar for both types, but the final porosity of the dry pellets was higher for the W/E pellets. Thus, the difference in final pellet porosity between the two types was caused by a difference in densification during drying rather than a different degree of densification during the pelletisation procedure. The contraction rate and the relationships between contraction and the volume of removed liquid, and contraction and the degree of liquid saturation differed between the two types of pellet. The difference in drying behaviour between the two types of pellets can be explained by a liquid related change in both contraction driving force and contraction counteracting force or by a different contraction mechanism.

Algorithms↗
PubMed2002

The influence of liquid binder on the liquid mobility and preparation of spherical granules by the process of extrusion/spheronization.

The influence of the type of liquid on the movement of water and the performance of the preparation of pellets by the process of extrusion/spheronization has been studied. Liquid movement was assessed by a pressure membrane technique and by extrusion, while the pellet properties were assessed in the terms of their median size, size range (interquartile range), roundness (by a two-dimensional shape factor) and porosity. The model formulations studied were microcrystalline cellulose (MCC) and mixtures of MCC and barium sulphate at 20, 50 and 80% levels. The liquids were water, a 25% solution of glycerol in water and an anionic surfactant (sodium lauryl sulphate) below its c.m.c. and two concentrations (0.01 and 0.0001%) of a non-ionic surfactant (Pluronic PF68). The presence of the different liquids changed the ease and extent with which the liquid could be removed (drying) and reabsorbed (wetting), resulting in lower levels of saturation with the glycerol solution and considerably increased levels of saturation with the surfactants. Changes in liquid movement during extrusion, were influenced more by the level of liquid and the rate of extrusion, than by its composition. The level of liquid was also an important factor in terms of the force necessary to extrude the different formulations. For a given level of liquid, the glycerol solution tended to increase extrusion force, while the surfactant solutions tended to decrease the extrusion force. The liquid levels, particulate composition and rate of extrusion were important in terms of pellet size, size range, roundness and porosity. The low level of liquid involved produced elongated pellets. The wet formulations produced larger, agglomerated pellets with a wide particle size range and a higher porosity. The lowest porosity pellets were prepared from mixtures with no or a low barium sulphate content while the highest levels of porosity were found with equal parts MCC and barium sulphate. In general, for equivalent liquid contents, pellets made with the glycerol solution were more porous than those prepared with water while the opposite was true for pellets made with surfactants. Although the different liquids influenced water movements, they did not prevent the formation of high quality pellets by the process of extrusion/spheronization.

Algorithms↗
PubMed2006

Permeability of collapsed cakes formed by deposition of fractal aggregates upon membrane filtration.

We have investigated, theoretically, the physical properties of cake layers formed from aggregates to obtain a better understanding of membrane systems used in conjunction with coagulation/flocculation pretreatment. We developed a model based on fractal theory and incorporated a cake collapse effect to predict the porosity and permeability of the cake layers. The floc size, fractal dimension, and transmembrane pressure were main parameters that we used in these model calculations. We performed experiments using a batch cell device and a confocal laser-scanning microscope to verify the predicted specific cake resistances and porosities under various conditions. Based on the results of the model, the reduction in inter-aggregate porosity is more important than that in intra-aggregate porosity during the cake collapsing process. The specific cake resistance decreases upon increasing the aggregate size and decreasing the fractal dimensions. The modeled porosities and specific cake resistances of the collapsed cake layer agreed reasonably well with those obtained experimentally.

Filtration↗
PubMed2001

Evaluation of critical binder properties affecting the compactibility of binary mixtures.

The aim of this study was to identify essential physical and mechanical properties of various binders and to investigate their influence on the tensile strength and porosity of tablets made from binary mixtures with sodium bicarbonate. The binders were characterized according to axial and radial tensile strength after compression into tablets, yield pressure and minimum porosity during compression, and elastic recovery after compression. The addition of a binder generally resulted in an increase in the tensile strength and a decrease in the porosity of the sodium bicarbonate tablets. The location of the binder in the voids between the sodium bicarbonate particles thus decreasing the porosity of the tablet seemed to be an important consideration. Consequently, the addition of binders with a low yield pressure value and a relatively small elastic recovery value (e.g., polyethylene glycol 3000 and polyvinylpyrrolidone) resulted in tablets of low porosity and high tensile strength, especially in the axial direction. The tensile strength of the pure binder also seemed to be important, especially for binders with a lower degree of deformability (e.g., microcrystalline cellulose and pregelatinised starch). The results also indicated the value of using both axial and radial tensile strength measurements in assessing the effect of a dry binder and showed that the importance of different binder properties varied according to the direction of the tablet strength measurements. The results demonstrated that the applied characteristics of the binders used in this study may serve as a useful tool in evaluating the effectiveness of binders.

Porosity↗
PubMed2001

Micromeritic and packing properties of diclofenac pellets and effects of some formulation variables.

The effects of two common diluents (microcrystalline cellulose and calcium phosphate dihydrate), two binding agents (gelatin and methacrylic polymer), and spheronization on the micromeritic (size, shape, density), flow, and packing properties of sodium diclofenac pellets were examined. The shape was assessed as the aspect ratio and was correlated to the flow rate and to the deviation of the tapped porosity from the value of 26%, which corresponds to the ideal rhombohedral packing of spheres. It was found that porosity deviation decreased greatly with spheronization, but it increased with hinder addition. Porosity deviation was proportional to the aspect ratio, while flow rate decreased logarithmically with porosity deviation. Porosity deviation may be a useful index for monitoring the quality of pellets, similar to the aspect ratio, as a successful, simple, and indirect indication of sphericity and of surface roughness as well.

Anti-Inflammatory Agents, Non-Steroidal↗