Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Extraction and Processing Industry”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 793 records · Page 44Linked to original sources
PubMed2004

Assessment of the radiological impacts of historical coal mining operations on the environment of Ny-Alesund, Svalbard.

Mineral extraction activities, such as those conducted by oil, gas and coal industries, are widespread throughout the Arctic region. Waste products of these activities can result in significant contributions to the radioactive burden of the surrounding environment due to increased concentrations of naturally occurring radioactive materials (NORM) to levels that would not normally be found in the environment. Coal mining operations commenced in the early 1900s on Svalbard and have been conducted at a variety of locations on the archipelago since then. Coal contains radionuclides of the uranium and thorium series as well as 40K. Extraction and processing of coal can result in releases of these radionuclides to the broader environment with subsequent impact on the human and non-human inhabitants of the area. This paper presents the results of a study on environmental radioactivity resulting from historical coal mining operations conducted at Ny-Alesund, Spitsbergen, in the Svalbard archipelago. Activity concentrations of radionuclides found in materials associated with these operations are presented as well as the results of a spatial dosimetric survey conducted over an area affected by coal mining.

Arctic Regions↗
PubMedDate not supplied

Characterization of filter extractables by proton NMR spectroscopy: studies on intact filters with process buffers.

Studies were conducted to characterize potential extractables from sterilizing grade filters. The focus of this report is the 0.22 micron Durapore (hydrophilic modified PVDF) filter which is used throughout our recovery processes. The objectives of this study are (1) to identify potential filter extractables from the hydrophilic PVDF filters; (2) to show that NMR spectroscopy may be used to detect filter extractables in the presence of product and excipients; and (3) to establish levels of filter extractables obtained by extraction with a variety of buffers. The data show that the primary source of filter extractables is the hydrophilic modification of the PVDF membrane surface. Extractables from the modified hydrophilic PVDF filter include propylene glycol (PG) and soluble oligomers of the hydroxypropyl acrylate and cross-linker. Propylene glycol, arising from the hydrolysis of the hydroxypropyl acrylate, appears to be the primary extractable in buffers above pH 11. Since the 1H-NMR method can easily detect the methyl proton signals of PG, an NMR assay was developed to detect PG in the presence of buffer excipients and final product. Propylene glycol can be used as a marker for the extractables from Durapore hydrophilic PVDF filters. Although numerous buffers were used to generate extractables from the PVDF filter, significant extractables (PG and soluble oligomers) were found only in high pH extraction buffers. As a result of this finding, only a limited number of new buffers or new PVDF filters will require testing for future validation studies. Process validation studies have shown that neither PG nor soluble oligomers are at levels that impact the quality or safety of the product.

Buffers↗
PubMedDate not supplied

Optimization of a liquid chromatographic method for determination of malachite green and its metabolites in fish tissues.

A liquid chromatographic (LC) method was adapted and optimized for the determination of malachite green and its metabolites in fish plasma and muscle. Residues in plasma were extracted with acetonitrile, the extract was evaporated to dryness, and residues were resolubilized for LC analysis. Residues in muscle were extracted with an acetonitrile-acetate buffer mixture, reextracted with acetonitrile, and partitioned into methylene chloride with final cleanup on alumni and propylsulfonic acid solid-phase extraction columns. Residue levels were determined by using an LC cyano column with a PbO2 postcolumn and visible detection (618 nm). Overall mean recoveries of parent malachite green (MG-C) and its major metabolite, leuco-malachite green (MG-L), from plasma were 93 and 87%,respectively, at fortification levels ranging from 25 to 250 ppb. Overall mean recoveries of MG-C and MG-L from muscle were 85 and 95%, respectively, at fortification levels ranging from 5 to 100 ppb. Relative standard deviations (RSDs) of recoveries at all fortification levels ranged from 3.9 to 7.0% for plasma and from 2.1 to 5.2% for muscle. The method was applied to incurred residues in tissues sampled from catfish after waterborne exposure to [14C]MG-C. Mean recoveries of total radioactive residues in plasma and muscle throughout the extraction and cleanup process were 88 and 87%, respectively, and corresponding RSDs for MG-C and MG-L were in the same range as those for fortified tissues. MG-L was confirmed as the major metabolite of MG-C in catfish.

Aniline Compounds↗
PubMed2001

Quantification of intracellular amino acids in batch cultures of Saccharomyces cerevisiae.

The dynamics of intracellular amino acid pools were determined in batch cultures of Saccharomyces cerevisiae. Immediate termination of metabolic activity was found to be necessary for accurate quantification of in vivo concentrations of intracellular amino acids, due to significant changes in most intracellular amino acid pools observed during extraction without an instantaneous stop of the metabolism. The method applied to batch-cultures of S. cerevisiae on glucose revealed complex dynamics in intracellular amino acid pools. The most drastic changes were observed during the diauxic shift and at the entry into the stationary phase. Even during phases of exponential growth on glucose and ethanol, cells showed significant variations in intracellular amino acid concentrations. The method presented can be used to investigate the physiology of yeast cultures, including industrially relevant batch and fed-batch processes.

Amino Acids↗
PubMed2001

Transformations of elemental mercury to inorganic and organic forms in mercury and hydrocarbon co-contaminated soils.

There are many industrial sites, such as gas processing plants, that are contaminated with both mercury and hydrocarbons. These sites tend to be localized but can have very high concentrations of mercury in the soil and heterogeneous distribution of hydrocarbons. The original form of mercury in many cases was elemental mercury from broken manometers. Over time the mercury has become redistributed within soil and has undergone chemical transformations into new forms. The forms of mercury will govern the chemical behavior and the availability of the mercury to biological receptors. The availability of the mercury is important as it will govern the risk associated with the contaminated soil and will also determine the effectiveness of any attempts at remediation. In the present study a chemical extraction protocol was used to determine the forms of mercury in soil originally contaminated by spillage of elemental mercury and petroleum hydrocarbons. Chemical extractions have been used in the past to determine the forms of mercury in uncontaminated soils and several researchers have used them to study contaminated soils. However, to date, no researchers have studied the forms of mercury in soils following years of weathering of elemental mercury after a spill. This study shows that decades after the original spill the elemental mercury has transformed and is dominantly (up to 85%) associated with soil organic matter, and to a lesser extent the mineral fraction of soil.

Biological Availability↗
PubMed1996

Ultrafiltration of Micellar Solutions in the Presence of Electrolytes

Micellar extraction coupled with ultrafiltration techniques represents a potentially attractive tool for the removal of different kinds of contaminants from waste waters. Even though most industrial streams to be treated contain large amounts of electrolytes, very little is known about the behavior of micellar solutions in ultrafiltration when large amounts of salts are present. This paper is concerned with an investigation of two cationic surfactants (cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC)) and one anionic surfactant (sodium dodecylsulfate (SDS)) in the presence of several salts occurring in specific industrial processes (carbonates and hydrogenocarbonates, nitrites, nitrates). The ultrafiltration behavior of these systems, with individual salt concentrations up to 0.9 M, is studied from the viewpoint of the fluxes obtained, the amount of surfactant leakage and of the membrane "gel point." Two types of polymeric membranes with molecular weight cutoff of 10,000 Da are considered (cellulose and polysulfone), which show significantly different behaviors.

Journal Article↗
PubMed2005

Selective removal of lead and bromide from a hazardous industrial solid waste using Limited Acid Demand and Separation Factor at ambient conditions.

A detailed methodology is described for the selective removal of lead and bromide content from an industrial toxic solid waste, containing also large quantities of iron. Limited Acid Demand (LAD) was examined in order to avoid the co-dissolution of undesirable constituents. The Separation Factor (SF), which is the concentration ratio of dissolved constituents in the resulting leaching solution after the application of extraction stage, can describe the selective release of lead against iron, according to the variation of major leaching parameters (i.e. the molarity of used acid and the liquid to solid (L/S) ratio). A general equation, describing the overall leaching process was obtained, containing a specific "inhibition constant" and indicating that when the initial stoichiometry of leaching procedure and the applied L/S ratio are known, then the removal of lead can be predicted.

Bromides↗
PubMed2004

[A comparative analysis of occupational risk in industry employees based on concentrations of some elements in teeth and body fluids].

Work safety and hygiene is a set of basic measures to protect workers from the negative effects of manufacturing processes. So far, numerous procedures for assessment of occupational health risk have been described. We measured the concentrations of some elements in teeth and body fluids of employees working in three different industries with an established production profile: Zakłady Naprawcze Taboru Kolejowego (repairs of rail vehicles), Philips Lighting Poland (production of lighting systems) and Metalplast (build ing furbishing factory). Different technologies were in place at each of these plants. Basing on laboratory analyses, the risk of exposure to chemical substances was evaluated. The study material included 100 extracted teeth, as well as body fluid samples (saliva, urine and blood) collected during routine health checks. Whenever possible, concentrations of the following elements were measured: calcium, magnesium, fluorine, phosphorus in the form of phosphates, potassium, sodium, iron, zinc, copper, cadmium, and lead. Metal elements were measured spectrophotometrically (ASA), fluorine with an ion-selective electrode, and phosphates with a colorimetric method. We found that concentrations of the elements in teeth and body fluids differed depending on the industry. For teeth, statistically significant differences applied to magnesium, phosphates, zinc, sodium, and potassium. In body fluids, statistically significant differences were found for calcium (blood and urine), magnesium (blood, urine and saliva), zinc (blood, urine and saliva), iron, lead and copper (urine). In conclusion, our findings may be helpful for monitoring safety at work in industrial plants.

Body Fluids↗
PubMed1983

[Effect of the harvest season on the composition of raw and fermented cotyledons of 2 varieties of cacao and shell fractions].

A study was carried out wherein during the period August 1979 to January 1980, samples of raw and fermented cacao were analyzed monthly. These included two varieties: Arriba, taken from a farm in "Quevedo", and the EET-19, grown in "Pichilingüe" by the Instituto Nacional de Investigaciones Agropecuarias (INIAP). Taking the ear of cacao as a basis, the weight of its main parts was determined. The proximal composition was established in the cotyledons, with significant statistical differences in regard to moisture, protein, and ether extract content according to the month of harvest. As to the fermentation process, differences in moisture, ether extract and ash content were detected; differences in the ether extract and ash content were found between the two varieties. The fat extracted from the cotyledons presented different iodine, saponification and acidity index values between the raw and fermented samples, but none were determined between the varieties; as far as the month of harvest is concerned, differences in the acidity index were observed. The percentage composition of the main fatty acids is reported (palmitic, stearic, oleic, and linoleic acids). In order to suggest possible industrial ways of utilizing the cacao shell by-product which is discarded by the shelling machine, the chemical characteristics of five fractions were determined based on the functioning of the shelling machine. The moisture, protein, ether extract, ash, crude fiber, theobromine, and caffeine contents varied among the fractions, and it was dependent on the broken "nibs" content. Differences in the protein, ether extract, and ash content, according to the months of production, were found. Obviously, the high fat content in fractions A (fine dust) and B (fine ground), which varied from 30 to 11 g/100 g, merits its extraction; the remainder meal has a valuable protein and alkaloid content. The chemical characteristics of the fat extracted from the shell of two fractions were similar to the fat extracted from the cotyledons.

Cacao↗
PubMed2006

A flexible approach for optimising in silico ADME/Tox characterisation of lead candidates.

Over the years, multiple in silico solutions have been developed for the early characterisation of lead candidates at early stages of the drug development process. Despite the nascent promise this technology holds for the pharmaceutical and biotech industries, in many cases, inherent limitations in many of these computational technologies still hinders the prediction performance of absorption, distribution, metabolism and excretion (ADME), and toxicological (Tox) properties. However, as the result of recent developments in this arena and key technology collaborations, Bio-Rad Laboratories, Inc. has made some breakthroughs with their in silico ADME/Tox prediction and lead optimisation solutions. The company's KnowItA11 ADME/Tox system, when used in conjunction with Equbits' Foresight support vector machine platform and other best-of-breed partnering technologies, provides an intelligent and flexible approach to in silico modelling that helps to overcome these difficulties. The system ultimately does this by offering various approaches and technologies that can lead researchers toward improvement in results and overall greater confidence in the in silico approach as a whole. In this technology evaluation, several examples and case studies on mutagenicity and hERG-channel blocking illustrate how researchers can take advantage of this system from compound characterisation to knowledge extraction to achieve better and faster results in their research process.

Animals↗
PubMed2003

Monitoring peanut allergen in food products by measuring Ara h 1.

BACKGROUND: Peanut allergy is an important health problem in the United States, affecting approximately 0.6% of children. Inadvertent exposure to peanut is a risk factor for life-threatening food-induced anaphylaxis. OBJECTIVE: The purpose of this investigation was to develop an immunoassay for a major peanut allergen, Ara h 1, to detect peanut allergen in foods so that the risk of inadvertent exposure can be reduced. METHODS: A specific 2-site monoclonal antibody-based ELISA was developed to measure Ara h 1 in foods. The sensitivity of the assay was 30 ng/mL. Ara h 1 was measured in foods (n = 83) with or without peanut and in experiments to optimize allergen yield and to determine peanut contamination in spiked foods. RESULTS: Ara h 1 levels in food products ranged from less than 0.1 microg/g to 500 microg/g. Ara h 1 measured in ng/mL was transformed to microg/g for food products. Peanut butter contained the highest amounts of Ara h 1. Peanut extracts contained from 0.5 to 15 mg Ara h 1/g of peanut depending on the extraction conditions. Optimal extraction of Ara h 1 was obtained by using phosphate buffer with 1 mol/L NaCl and Tween at 60 degrees C. Ara h 1 was not always detected in presence of chocolate under the extraction conditions tested. Spiking experiments showed that the assay could detect approximately 0.1% Ara h 1 contamination of food with ground peanut. There was an excellent correlation between Ara h 1 levels and peanut content measured by using a commercial polyclonal antibody-based ELISA (r = 93, n = 31, P <.001). CONCLUSION: A new sensitive and specific monoclonal antibody-based ELISA was used to monitor Ara h 1 content in food products. This assay should be useful for monitoring peanut contamination in the food manufacturing and processing industry and in developing thresholds for sensitization or allergic reaction in persons with peanut allergy.

Allergens↗
PubMed2005

Dynamics of C, N and P in soil amended with biosolids from a pharmaceutical industry producing cephalosporines or third generation antibiotics: a laboratory study.

Large parts of the central highlands of Mexico are heavily eroded and the success of a planned reforestation program will greatly improve when the organic matter and nutrient content of the soil increases prior to the planting of the trees. This study investigated how the application of biosolids from a pharmaceutical company producing cephalosporines or third generation antibiotics could be used as a soil amendment and affect dynamics of C, P and N in soil. A sandy clay loam soil was sampled, amended with 24 g of dry biosolids kg(-1) dry soil or approximately 32 x 10(3) kg ha(-1) for the 0-10 cm layer, and incubated aerobically while production of carbon dioxide (CO(2)), dynamics of ammonium (NH(4)(+)),nitrite (NO(2)(-)), nitrate (NO(3)(-)), sodium bicarbonate (NaHCO(3)) extractable phosphorus (PO(4)(3-)), and microbial biomass carbon (C) were monitored. Results showed that the biosolid with pH 12, organic C content 162 g kg(-1), total N 21 g kg(-1), was of excellent quality considering its heavy metal content (USEPA) and a class "B" (USEPA) biosolid considering the amount of pathogens. No cephalosporines could be detected in the biosolid. Addition of biosolid to soil increased production of CO(2) 1.4 times and added >60 mg NH(4)(+) kg(-1). The application of biosolids did not significantly increase the concentration of NO(2)(-) which remained <2 mg N kg(-1) soil, but the concentration of NO(3)(-) did increase with 175 mg N kg(-1) soil. The microbial biomass C did not change when sewage biosolids was added and concentrations of extractable PO(4)(3-) only increased temporarily. Washing the biosolids reduced concentrations of NH(4)(+) and NO(3)(-), but also reduced pathogens and concentrations of chloride (Cl(-)), which might pose a treat to humans and the environment, respectively. Although the biosolid added valuable nutrients to the soil and did not inhibit C and N mineralization, further investigation into possible long-term environmental effects on soil processes and plant growth is necessary before this biosolid can be used in the field.

Agriculture↗
PubMed2005

The role of some compounds on extraction of chromium(VI) by amine extractants.

The extraction of hexavalent chromium, Cr(VI), from hydrochloric acid aqueous solution using Aliquat 336 and Alamine 336 extractants was performed under different experimental conditions. The data clarify that one molecule of amine extractants shares with approximately one molecule of HCl to extract two molecules of Cr(VI) from 1M HCl aqueous solutions. The extraction is an exothermic process and possesses enthalpy change values of -41.02 and -28.08 kJ mol(-1) for the extraction by Aliquat 336 and Alamine 336, respectively. The presence of potassium chloride greatly increases the extraction of Cr(VI) by amine extractants while the addition of some phenolic compounds such as phenol, dichlorophenol, o-nitrophenol and beta-naphthol decreases this extraction under the same experimental conditions.

Amines↗
PubMed2005

Removal of polycyclic aromatic hydrocarbons from aged-contaminated soil using cyclodextrins: experimental study.

The removal of polycyclic aromatic hydrocarbons (PAHs) from soil using water as flushing agent is relatively ineffective due to their low aqueous solubility. However, addition of cyclodextrin (CD) in washing solutions has been shown to increase the removal efficiency several times. Herein are investigated the effectiveness of cyclodextrin to remove PAH occurring in industrially aged-contaminated soil. Beta-cyclodextrin (BCD), hydroxypropyl-beta-cyclodextrin (HPCD) and methyl-beta-cyclodextrin (MCD) solutions were used for soil flushing in column test to evaluate some influent parameters that can significantly increase the removal efficiency. The process parameters chosen were CD concentration, ratio of washing solution volume to soil weight, and temperature of washing solution. These parameters were found to have a significant and almost linear effect on PAH removal from the contaminated soil, except the temperature where no significant enhancement in PAH extraction was observed for temperature range from 5 to 35 degrees C. The PAHs extraction enhancement factor compared to water was about 200.

2-Hydroxypropyl-beta-cyclodextrin↗
PubMed2001

Legislative and environmental issues on the use of ash from coal and municipal sewage sludge co-firing as construction material.

For the economy of any co-firing process, it is important that the common waste management options of ash remain practical. Ash from bituminous coal combustion is typically handed to the construction industry. This paper describes the current European legislation on use of ash for construction purposes. Also, it presents an experimental study on the suitability of fly ash from combustion of mixtures of bituminous coal and municipal sewage sludge as additive to cement and concrete, and for use in open-air construction works, based on the ash chemical composition and the characteristics of the extract of the ash. Presently, two European standards forbid the use of ash from co-firing as additive to cement or concrete. This study shows that ash derived from coal and sewage sludge co-firing contains generally less unburned carbon, alkali, magnesium oxide, chlorine, and sulfate than coal ash. Only the concentration of free lime in mixed ash is higher than in coal, even though, at least up to 25% of the thermal input, still below the requirements of the standards. This ash also meets the requirements for the use of fly ash in open-air construction works--concentration and mobility of few elements--although this management option is forbidden to ash from co-firing. The leaching of Cd, Cr, Cu, Ni, Pb and Zn was investigated with three leaching tests. The concentration of these metals in the extracts was below the detection limit in most cases. The concentration of Cu and Zn in the extract from fly ash was found to increase with increasing share of sewage sludge in the fuel mixture. However, the concentration of these two metals in the extract is not regulated. This study indicates that excluding a priori the use of ash from co-firing as a suitable additive for construction material could cause an unnecessary burden on the environment, since probably ash would have to be disposed of in landfill. However, allowing this requires the modification of current European standards to include limitations on all elements and compounds, absent in coal but which might be present in other fuels, that are deleterious for the quality of construction materials.

Air Pollution↗
PubMed2005

Heavy metal removal from contaminated sludge for land application: a review.

In recent years, various methods for heavy metal removal from sewage sludge have been extensively studied in order to minimize the prospective health risks of sludge during land application. In this paper, a comparative review and critical analysis of the application of chemical extraction, bioleaching, electroreclamation, and supercritical fluid extraction (SFE), in removing heavy metals from contaminated sludges is presented. Moreover, speciation studies, which can indicate ease of leachability of the different forms of heavy metals in sludge, are also presented. Experimental studies revealed a broad range in metal extraction efficiencies of the different extraction technologies. Acid treatment seemed to effectively remove Cd, attaining as much as 100% removal for some studies, as compared to bioleaching. SFE also gave higher removal efficiency than bioleaching. Cr, Pb and Ni seemed to be also effectively removed by the acid treatment. For the removal of Cu, Mn and Zn, the bioleaching process seemed to be appropriate with maximum removal efficiencies of 91%, 93% and 96% for the three metals, respectively, and as high as 64% minimum removal efficiency for Zn. The SFE process also gave good results for Cu, Mn and Zn removal. Electroreclamation exhibited better removal efficiency for Mn, but is still inferior to acid treatment and bioleaching processes. For chemical extraction, because of the adverse impacts that can result from the use of inorganic acids and complexing agents, interest can be directed more toward utilizing organic acids as extracting agents because of their biodegradability and capability to remove metals at mildly acidic condition, hence requiring less acid. The bioleaching process, although it seems to give a higher yield of metal extraction with lower chemical cost than chemical extraction, may be limited by the inability of the system to cope with the natural environmental conditions, requires strict monitoring of aeration rate and temperature and has applicability to only low sludge solids concentration. A full-scale study would be useful to better assess the efficiency of the process. The electroreclamation technology is limited by its relatively higher energy consumption and limited applicability to sludge. The SFE method, on the other hand, is limited by the complexity of the process and the cost of ligands suitable for effective metal extraction. Both of these technologies are still in their early stage of application and hence there is a need for further basic and applied studies. Finally, the common advantage for almost all treatment technologies studied is that the extraction efficiencies for some metals are high enough to remove metals from sludge to levels suitable for land application.

Industrial Waste↗
PubMed1991

Factors relating to the development of respiratory symptoms in coffee process workers.

After several cases of occupational asthma had been reported in a coffee processing factory in England, 197 coffee workers representing 80% of the production workforce were studied to determine the factors affecting the development of work related respiratory symptoms of wheeze, cough, and dyspnoea. Two computer administered questionnaires concerning the presence of respiratory symptoms and the occurrence of work related respiratory symptoms were used. Workers underwent skin prick testing to green coffee bean extract (GCB) and 11 common inhalant allergen extracts and bronchial provocation testing with methacholine. The presence of specific immunoglobulin E (IgE) antibodies to GCB and castor bean extract (CAB) were determined by a radioallergosorbent test (RAST). The prevalence of work related respiratory symptoms was 12.7%, bronchial hyperresponsiveness 30%, atopy 54%, positive GCB skin prick test 14.7%, positive GCB RAST 14%, and positive CAB RAST 14.7%. None of the workers was sensitised to fungi present in the factory and the numbers of certain species of fungi, despite being greater than may be found out of doors or in an uncontaminated indoor environment, were fewer than are generally associated with the presence of work related respiratory symptoms among agricultural workers. Storage mites were not isolated. Green coffee bean extract and CAB RAST were significantly correlated using the McNemar test but there was limited allergenic cross reactivity in RAST inhibition studies of the two extracts. The only factors that were significantly and independently associated with work related symptoms were CAB RAST and duration of employment. Bronchial hyperresponsiveness was not independently associated with work related respiratory symptoms. The significant independent associations of bronchial hyperresponsiveness included GCB RAST, duration of employment, and resting forced expiratory volume in one second. Exposure to CAB, a highly potent antigen, may be overriding the effects of other factors such a GCB, atopy, bronchial hyperresponsiveness, and smoking. This study suggests that CAB contamination remains a potential problem in the coffee processing industry and all efforts to eliminate it from the working environment should continue.

Adolescent↗
PubMed2006

Factors contributing to the poor bulk behavior of meat and bone meal and methods for improving these behaviors.

Meat and bone meal (MBM), a product of the rendering industry, is a potential feedstock for numerous bio-based applications. Design of processing equipment for MBM is difficult due to MBM's bulk behaviors; it flows less easily than many other granular materials, and it tends to foul the surfaces of processing equipment. This study examines the major factors contributing to MBM's poor bulk behavior, including moisture content, fat content, particle size distribution and temperature, and the relative importance of these factors. Potential methods for improving MBM's bulk properties, including use of an anti-caking agent, dehydration, fat extraction, milling and refrigeration are also studied. The effects of these factors were determined by a standard laboratory measurement, the Hausner ratio, as well as by the rate of surface-fouling and dust generation using a pilot-scale aspirator. In contrast to past studies with other granular materials, moisture content was shown to have an insignificant effect on MBM's bulk behavior. The results, however, show that MBM fat content is a major determinant of the bulk behavior of the MBM. Reduction of fat content resulted in major changes in MBM's bulk behavior, by all measures used. Less dramatic changes were achieved through refrigeration to solidify the fat and/or treatment with an anti-caking agent.

Adsorption↗