Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “RADIOACTIVE WASTE”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43Linked to original sources
PubMed2005

Chromate reduction and retention processes within arid subsurface environments.

Chromate is a widespread contaminantthat has deleterious impacts on human health, the mobility and toxicity of which are diminished by reduction to Cr(III). While biological and chemical reduction reactions of Cr(VI) are well resolved, reduction within natural sediments, particularly of arid environments, remains poorly described. Here, we examine chromate reduction within arid sediments from the Hanford, WA site, where Fe(III) (hydr)oxide and carbonate coatings limit mineral reactivity. Chromium(VI) reduction by Hanford sediments is negligible unless pretreated with acid; acidic pretreatment of packed mineral beds having a Cr(VI) feed solution results in Cr(III) associating with the minerals antigorite and lizardite in addition to magnetite and Fe(II)-bearing clay minerals. Highly alkaline conditions (pH > 14), representative of conditions near high-level nuclearwaste tanks, result in Fe(II) dissolution and concurrent Cr(VI) reduction. Additionally, Cr(III) and Cr(VI) are found associated with portlandite, suggesting a secondary mechanism for chromium retention at high pH. Thus, mineral reactivity is limited within this arid environment and appreciable reduction of Cr(VI) is restricted to highly alkaline conditions resulting near leaking radioactive waste disposal tanks.

Chromates↗
PubMed2005

Facile and efficient postsynthetic tritium labeling method catalyzed by Pd/C in HTO.

[reaction: see text] We have developed a facile and efficient tritium labeling method using a Pd/C-HTO-H2 system. This method can provide multitritium-labeled compounds in highly diluted HTO under T2 gas-free conditions, and is environmentally benign since purification by silica gel column chromatography is not necessary, which causes a large quantity of radioactive waste such as silica gel and eluent.

Catalysis↗
PubMed2006

89Y magic-angle spinning NMR of Y2Ti2-xSnxO7 pyrochlores.

The yttrium local environment in the series of pyrochlores Y2Ti2-xSnxO7 was studied using 89Y NMR. Oxides with the pyrochlore structure exhibit a range of interesting physical and chemical properties, resulting in many technological applications, including the encapsulation of lanthanide- and actinide-bearing radioactive waste. The use of the nonradioactive Y3+ cation provides a sensitive probe for any changes in the local structure and ordering with solid solution composition, through 89Y (I = 1/2) NMR. We confirm that a single pyrochlore phase is formed over the entire compositional range, with Y found only on the eight-coordinated A site. A significant (approximately 15 ppm) chemical shift is observed for each Sn substituted into the Y second neighbor coordination environment. The spectral signal intensities of the possible combinations of Sn/Ti neighbors match those predicted statistically assuming a random distribution of Sn4+/Ti4+ on the six-coordinated pyrochlore B site.

Journal Article↗
PubMed2003

Evaluation of the BacT/ALERT 3D system for recovery and drug susceptibility testing of Mycobacterium tuberculosis.

We evaluated the BacT/ALERT 3D system for recovery and drug susceptibility testing (DST) of Mycobacterium tuberculosis (MTB). Of 2659 clinical specimens, MTB was detected in 92 using BacT/ALERT, compared to 94 using Löwenstein-Jensen culture. Detection time was 25% shorter with BacT/ALERT. Sensitivities were 92%, 96%, 78% and 100% for resistance to rifampicin, isoniazid, streptomycin and ethambutol, respectively, while specificity was 100% for all antibiotics, when BacT/ALERT was compared with the BACTEC 460 method on 50 MTB isolates. The BacT/ALERT system is fully automated and creates no radioactive waste. It seems to be a valid alternative for primary isolation, but further evaluation is needed regarding DST.

Humans↗
PubMed1995

Effect of chronic irradiation on the humoral immune response of a marine fish, the eelpout (Zoarces viviparus L.).

Eelpout (Zoarces viviparus), a marine fish, were exposed to gamma-radiation at a dose-rate of 2.0 mGy h-1. They were injected with the antigen trinitrophenyl-keyhole limpet haemocyanin (TNP-KLH) and their specific humoral immune response to the TNP hapten measured. There were no differences in the primary antibody response between unirradiated controls and treated fish. However, the response to a second injection of antigen was significantly increased in irradiated fish. There were no significant radiation effects on total serum protein or serum lysozyme. Radiation effects on testis were also examined and there was a significant radiation-induced reduction in relative weight (gonadosomatic index). These results are discussed with reference to environmental radiation levels in areas of authorized radioactive waste disposal.

Animals↗
PubMed1998

A microtitre-based method for measuring the haem polymerization inhibitory activity (HPIA) of antimalarial drugs.

The malaria parasite metabolizes haemoglobin and detoxifies the resulting haem by polymerizing it to form haemozoin (malaria pigment). A polymer identical to haemozoin, beta-haematin, can be obtained in vitro from haematin at acidic pH. Quinoline-containing anti-malarials (e.g. chloroquine) inhibit the formation of either polymer. Haem polymerization is an essential and unique pharmacological target. To identify molecules with haem polymerization inhibitory activity (HPIA) and quantify their potency, we developed a simple, inexpensive, quantitative in-vitro spectrophotometric microassay of haem polymerization. The assay uses 96-well U-bottomed polystyrene microplates and requires 24 h and a microplate reader. The relative amounts of polymerized and unpolymerized haematin are determined, based on solubility in DMSO, by measuring absorbance at 405 nm in the presence of test compounds as compared with untreated controls. The final product (a solid precipitate of polymerized haematin) was validated using infrared spectroscopy and the assay proved reproducible; in this assay, activity could be partly predicted based on the compound's chemical structure. Both water-soluble and water-insoluble compounds can be quantified by this method. Although the throughput of this assay is lower than that of radiometric methods, the assay is easier to set up and cheaper, and avoids the problems related to radioactive waste disposal.

Analysis of Variance↗
PubMed2005

Induced radioactivity in the ESRF storage ring.

The new French radiation protection legislation requires the definition of the zoning of accelerator facilities with respect to radioactive waste. This activation inside the ESRF 6 GeV storage ring is essentially due to photonuclear reactions. This paper describes the first results of Monte Carlo calculations that were started to prepare this zoning. The electron beam losses inside the storage ring, required to calculate saturation activities, are described. Results for the activation of the air inside the ring tunnel and of the cooling water are presented. The activation of accelerator components is illustrated with the results of the activation of the stainless steel vessels in a standard cell and in a cell with higher losses due to the presence of a vertical scraper. The amount of activation is compared with clearance levels given in the European directive 96/29/Euratom.

Computer Simulation↗
PubMed2005

Measurement and analysis of induced activities in concrete irradiated using high-energy neutrons at KENS Neutron Spallation Source Facility.

Precise estimation of induced activities in concrete shields for high-energy accelerator facilities is one of the most important issues that need to be solved, not only for the reduction of exposure for workers, but also for the reduction of radioactive wastes. Irradiation experiments have been performed by using the 500 MeV Neutron Spallation Source Facility in KEK. The large concrete assembly was placed in the direction of 0 degrees to the beamline. Two kinds of samples were placed at several positions in the assembly. The irradiation period was about 1 week and induced activities in the samples were measured until approximately 1.5 y after irradiation. From the comparison between the experiment and the available Monte Carlo calculation code system, good agreement was obtained for 24Na, 47Sc, 47Ca and 54Mn within a factor 2; however, large discrepancies were observed for some other nuclides.

Computer Simulation↗
PubMed2005

Radiotoxicity and decay heat power of spent nuclear fuel of VVER type reactors at long-term storage.

Radiotoxicity and decay heat power of the spent nuclear fuel of VVER-1000 type reactors are calculated during storage time up to 300,000 y. Decay heat power of radioactive waste (radwaste) determines parameters of the heat removal system for the safe storage of spent nuclear fuel. Radiotoxicity determines the radiological hazard of radwaste after its leakage and penetration into the environment.

Half-Life↗
PubMed2005

Development of a simple method to evaluate medical staff radiation dose and its application to a software system supporting PET facility operation.

In recent years, positron-emitting labelled radiopharmaceuticals have come to be used in conjunction with positron emission tomography (PET) in various clinical diagnoses. Radiation exposure of the medical staff is a key issue in the design of PET facilities intended to handle large numbers of persons for PET diagnosis. As a first step, the radiation dose to individuals who received radiopharmaceuticals was calculated using a mathematical phantom model and the EGS4 electromagnetic cascade Monte Carlo code and MCNP Monte Carlo code. Dose rate behind a lead shield was also calculated for various lead thicknesses. The radiation dose distribution around a syringe containing a positron emitter was calculated. The calculated dose distributions were fitted to polynomial equations. These calculations were evaluated against measurements. The second step was to evaluate medical staff dose at a specified time by superimposing dose distribution from each person who received radioisotopes taking into account radioactive decay. In this way, we developed software to support PET facility operation, namely, planning, prediction, control of medical staff dose and facility operation. This system was also designed to schedule daily radiopharmaceuticals production and to manage radioactive wastes by taking decay time into account.

Body Burden↗
PubMed2005

A comparison of skyshine computational methods.

A variety of methods employing radiation transport and point-kernel codes have been used to model two skyshine problems. The first problem is a 1 MeV point source of photons on the surface of the earth inside a 2 m tall and 1 m radius silo having black walls. The skyshine radiation downfield from the point source was estimated with and without a 30-cm-thick concrete lid on the silo. The second benchmark problem is to estimate the skyshine radiation downfield from 12 cylindrical canisters emplaced in a low-level radioactive waste trench. The canisters are filled with ion-exchange resin with a representative radionuclide loading, largely 60Co, 134Cs and 137Cs. The solution methods include use of the MCNP code to solve the problem by directly employing variance reduction techniques, the single-scatter point kernel code GGG-GP, the QADMOD-GP point kernel code, the COHORT Monte Carlo code, the NAC International version of the SKYSHINE-III code, the KSU hybrid method and the associated KSU skyshine codes.

Air↗
PubMed2006

Thermal stability of the thermoluminescence trap structure of bentonite.

This work reports about the thermal stability of the blue thermoluminescence (TL) of a well-characterised natural bentonite from Almeria (Spain). The main interest of this clay, mainly composed of montmorillonite, is because of its application in the field of high-level radioactive waste (HLW) repository in deep-lying rocks. As observed in other aluminosilicates, bentonite exhibits a very complex structure of the emission spectra based on a wide broad maximum peaked at approximately 265 degrees C that can be associated to physico-chemical processes such as dehydroxylation processes, consecutive breaking linking of bonds, formation of hydrolysed ions and redox reactions. The thermal stability tests performed at different temperatures confirm a continuum in the distribution of traps. Hence, the glow curve analysis methods commonly used for synthetic materials based on single discrete traps cannot be applied for this material and the kinetic parameters were fitted assuming an exponential distribution of trapped electrons.

Bentonite↗
PubMed1986

Leaching of 226Ra from U mill tailings by sulfate-reducing bacteria.

Relatively insoluble sulfate precipitates appear to be a major host for Ra in sulfuric acid-treated, U mill tailings. The dissolution of such precipitates by natural processes, such as metabolism by sulfate-reducing bacteria (SRB), creates the potential for release of Ra to contacting waters. Significant leaching of Ra by SRB was achieved in the laboratory during the anaerobic incubation (1 to 119 days) of U mill tailings with pure cultures of Desulfovibrio desulfuricans and mixed cultures containing SRB isolated from the tailings, all grown on a lactate medium at room temperature. While the maximum 226Ra concentration reached in a sterile media control was 0.44 Bq/L (12 pCi/L), that in the SRB systems was 61 Bq/L (1640 pCi/L) or about 20% of the total Ra inventory in the original tailings sample. The leaching of Ra in SRB systems was accompanied by a decrease in soluble sulfate concentration, an increase in total sulfide concentration, and an increase in the number of SRB. The observed leaching effect does not appear to be due to the action of microbial chelates or to binding to cell walls. Potential implications of these findings to the management of U mill tailings and other radioactive wastes are discussed.

Desulfovibrio↗
PubMed1990

Root mass and vertical root distribution of five semi-arid plant species.

The root masses of big sagebrush, Great Basin wild rye, Russian thistle, streambank wheatgrass, and crested wheatgrass were determined at 20 cm depth increments from plants grown in high clay content soils in cylindrical containers. All species had roots in the deepest (100-120 cm) depth increment. Crested wheatgrass had the greatest average (+/- SD) total root mass (775 +/- 211 g). Results provide data for some scenarios for fate and effect models for shallow-land burial of low-level radioactive wastes in semi-arid environments.

Desert Climate↗
PubMed1991

Data base management system for a radiation safety program.

A data base management system (DBMS) has been developed that simplifies the retrieval of data concerning radioisotope use at a university and hospital. The system customizes software that is commercially available to perform several functions. Reports can be developed concerning receipt of radioactive materials, radioactive waste disposal, and research proposals submitted by investigators. Reports can be prepared that utilize the software's ability to perform numerical calculations. The main advantage of the DBMS is that it allows the easy retrieval of information that is used in the day-to-day operation of a radiation safety office; it also provides easy access and manipulation of data for the preparation of reports, budget proposals, and justifications for purchases.

Database Management Systems↗