SEARCH · Search PubMed

Results for “GLUTEN”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43Linked to original sources

PubMed1993

Elevated serum aminotransferase activity as an early manifestation of gluten-sensitive enteropathy.

Six children in whom long-standing hypertransaminasemia of unknown cause led to an initial diagnosis of chronic or protracted cryptogenic hepatitis were found to have asymptomatic celiac disease. Administration of a gluten-free diet caused a prompt improvement of both hepatic and intestinal biochemical/histologic abnormalities. Hepatic damage may be another "atypical" form of celiac disease in children.

Celiac Disease↗

PubMed1976

Stimulation of lymphocytes from patients with coeliac disease by a subfraction of gluten.

Peripheral-blood lymphocytes from patients with coeliac disease showed a marked increase in D.N.A. synthesis after incubation in vitro with a subfraction of gluten. Lymphocytes from control patients showed no increased D.N.A. synthesis under the same conditions. The possible use of this specific lymphocyte-stimulation assay as a screening test for coeliac disease is discussed.

Adolescent↗

PubMed1976

Specific B-cell antigens associated with gluten-sensitive enteropathy and dermatitis herpetiformis.

Gluten-sensitive enteropathy (G.S.E.) and dermatitis herpetiformis (D.H.) are associated with an increased frequency of the histocompatability antigen HLA-B8. These diseases were found to be even more strongly associated with a specific B-lymphocyte surface antigen recognised by maternal antisera. Two antisera (B-1 and W-1) reacted with B lymphocytes form G.S.E. and D.H. patients. Antiserum B-1 reacted with cells from thirteen of sixteen G.S.E. patients and from fifteen of nineteen D.H. patients, while antiserum W-1 reacted with cells from fifteen of sixteen G.S.E. patients and from fifteen of fifteen D.H. patients. None of the sera tested reacted with B lymphocytes from thirty-seven normal individuals, whether or not they were HL8-B8 positive. The identification of this specific antigen provides further insight into the pathogenesis of G.S.E. and D.H. and might form the basic of a diagnostic test for these diseases.

Adolescent↗

PubMed1999

Thermal properties of corn gluten meal and its proteic components.

Thermal properties of corn gluten meal (CGM) and of its extracted proteic components (zein and glutelin) at 0% moisture content, is studied by dynamic mechanical thermal analysis (DMTA) and modulated differential scanning calorimetry (MDSC). The glass transition temperature (Tg) on first heating, is measured at 176 and 174 degrees C, respectively, for hot-air-dried and native CGM. For zein and glutelin isolated fractions, the measured Tg values are 164 and 209 degrees C, respectively. The calculated Tg from using Matveev's method (Matveev YI. Spec Publ R Soc Chem 1995;156;552) is in good agreement with experimental data for zein, a well defined protein. MDSC allows the measurement of change in heat capacity at Tg (deltaCp) with a single heating scan, avoiding sample alteration, and deltaCp values are 0.365 J/g per K for zein and 0.184 J/g per K for glutelin. The differences observed in Tg, relaxation temperatures, deltaCp and tan delta peak height are related to differences in the structure of the proteins, through the cross-linkages and hydrogen or van der Waals interactions. Experimental data from DMTA and MDSC, and the Couchman-Karasz thermodynamic approach indicate that CGM behaves as a miscible blend of its components, with high non-polar interactions between zein and glutelin proteins.

Amino Acids↗

PubMed1998

Epilepsy, cerebral calcifications and clinical or subclinical coeliac disease. Course and follow up with gluten-free diet.

We have studied four patients (three male, one female, age range 15-25 years) with epilepsy, bilateral occipital calcifications and latent coeliac disease (CD). The epilepsy started at mean age 7 years, in three cases there were partial seizures and in one case generalized seizure. Three cases had symptoms suggesting malabsorptive syndrome during infancy and one case was diagnosed CD before the onset of seizures. In all cases serologic markers of CD were found, especially antiendomisium antibody, and intestinal biopsy indicated several grades of atrophy. The electroencephalograph (EEG) findings pointed to focal abnormalities in three patients and generalized abnormalities in one patient. In all cases computer tomography (CT) showed bilateral, almost symmetrical occipital calcifications in the cortical subcortical layers. The enhanced CT were unremarkable and magnetic resonance images (MRI) were normal. After diagnosis of CD, all patients followed a gluten-free diet and in three patients a significant reduction in seizure frequency was observed. CD should be ruled out in all cases of epilepsy, cerebral calcifications of unexplained origin and malabsorption syndrome in infancy.

Adolescent↗

PubMedDate not supplied

Transport and tensile properties of compression-molded wheat gluten films.

Mechanical and transport properties were assessed on wheat gluten films with a glycerol content of 25-40%, prepared by compression molding for 5-15 min at temperatures between 90 and 130 degrees C. Effects of storing the films up to 24 days, in 0 and 50% relative humidity (RH), were assessed by tensile measurements. The films were analyzed with respect to methanol zero-concentration diffusivity, oxygen permeability (OP), water vapor permeability (WVP), Cobb60 and sodium dodecyl sulfate (SDS) solubility coupled with sonication. The SDS solubility and methanol diffusivity were lower at the higher molding temperature. Higher glycerol content resulted in higher OP (90-95% RH), WVP, and Cobb60 values, due to the plasticizing and hygroscopic effects. Higher glycerol contents gave a lower fracture stress, lower Young's modulus, lower fracture strain, and less strain hardening. The mold time had less effect on the mechanical properties than mold temperature and glycerol content. The fracture stress and Young's modulus increased and the fracture strain decreased with decreasing moisture content.

Biological Transport↗

PubMedDate not supplied

Properties and microstructure of thermo-pressed wheat gluten films: a comparison with cast films.

Wheat gluten films were prepared by thermo-pressing, and their mechanical properties were compared to those of cast films. The stress-strain relationship was established for films with various amounts of glycerol. Both relationships were quite different, revealing a different network organization. Thermo-pressed films presented higher stress values than cast films, but the effect of the glycerol amount was similar in both cases, an increase of the glycerol amount leading to a decrease of both films stress. The glycerol influence on the strain at break of thermo-pressed films was very limited, with strain values reaching a maximum around 200%. The role of disulfide bridges on themomoulded films mechanical properties was investigated, and it was shown that some rearrangements and a significative protein insolubilization occurred during the process. The effective flow porosity of the protein network for thermo-pressed films was estimated by water capillary rise measurements to about 7%. Scanning electron microscopy was used to obtain some information about the microstructure of both cast and thermo-pressed films.

Disulfides↗

PubMed2006

Aging properties of films of plasticized vital wheat gluten cast from acidic and basic solutions.

In order to understand the mechanisms behind the undesired aging of films based on vital wheat gluten plasticized with glycerol, films cast from water/ethanol solutions were investigated. The effect of pH was studied by casting from solutions at pH 4 and pH 11. The films were aged for 120 days at 50% relative humidity and 23 degrees C, and the tensile properties and oxygen and water vapor permeabilities were measured as a function of aging time. The changes in the protein structure were determined by infrared spectroscopy and size-exclusion and reverse-phase high-performance liquid chromatography, and the film structure was revealed by optical and scanning electron microscopy. The pH 11 film was mechanically more stable with time than the pH 4 film, the latter being initially very ductile but turning brittle toward the end of the aging period. The protein solubility and infrared spectroscopy measurements indicated that the protein structure of the pH 4 film was initially significantly less polymerized/aggregated than that of the pH 11 film. The polymerization of the pH 4 film increased during storage but it did not reach the degree of aggregation of the pH 11 film. Reverse-phase chromatography indicated that the pH 11 films were to some extent deamidated and that this increased with aging. At the same time a large fraction of the aged pH 11 film was unaffected by reducing agents, suggesting that a time-induced isopeptide cross-linking had occurred. This isopeptide formation did not, however, change the overall degree of aggregation and consequently the mechanical properties of the film. During aging, the pH 4 films lost more mass than the pH 11 films mainly due to migration of glycerol but also due to some loss of volatile mass. Scanning electron and optical microscopy showed that the pH 11 film was more uniform in thickness and that the film structure was more homogeneous than that of the pH 4 film. The oxygen permeability was also lower for the pH 11 film. The fact that the pH 4 film experienced a larger and more rapid change in its mechanical properties with time than the pH 11 film, as a consequence of a greater loss of plasticizer, was presumably due to its initial lower degree of protein aggregation/polymerization. Consequently, the cross-link density achieved at pH 4 was too low to effectively retain volatiles and glycerol within the matrix.

Chromatography, High Pressure Liquid↗

PubMed2006

Wheat gluten-thiolated poly(vinyl alcohol) blends with improved mechanical properties.

A multifunctional macromolecular thiol (TPVA) obtained by esterification of poly(vinyl alcohol) (PVA) with 3-mercaptopropionic acid was characterized by a combination of NMR, IR, transmission electron microscopy (TEM), and differential scanning calorimetry (DSC), and was used as a wheat gluten (WG) reactive modifier. The effect of TPVA molecular weight (M(w) = 2000, 9500, 50 000, and 205 000) and blend composition (5, 20, and 40% w/w TPVA/WG) on the mechanical properties of compression-molded bars indicates that TPVA/WG blends increase the fracture strength by up to 76%, the elongation by 80%, and the modulus by 25% above WG. In contrast, typical WG additives such as glycerol and sorbitol improve flexibility but decrease modulus and strength. Preliminary investigations of suspension rheology, water uptake, molecular weight distribution and electron microscopy of TPVA/WG and PVA/WG blends illustrate the different protein interactions with PVA and TPVA. Further work is underway to determine whether TPVA and WG form protein conjugates or microphase-separated morphologies.

Acetic Acid↗

PubMed2006

pH effect on the mechanical performance and phase mobility of thermally processed wheat gluten-based natural polymer materials.

The mechanical properties, phase composition, and molecular motions of thermally processed wheat gluten- (WG-) based natural polymer materials were studied by mechanical testing, dynamic mechanical analysis (DMA), and solid-state NMR spectroscopy. The performance of the materials was mainly determined by the denaturization and cross-linking occurring in the thermal processing and the nature or amount of plasticizers used. The pH effect also played an important role in the materials when water was used as the only plasticizer (WG-w). Alkaline conditions modified the chemical structure of WG, possibly via deamidation; enhanced the thermal cross-linking of WG macromolecules to form a more stable aggregation structure; and promoted intermolecular interactions between water and all components in WG (proteins, starch, and lipid), resulting in a strong adhesion among different components and phases. The saponification of lipid under alkaline conditions also enhanced the hydrophilicity of lipid and the miscibility among lipid, water, and WG components. However, when glycerol was used with water as a plasticizer (WG-wg), the phase mobility and composition of the materials mainly depended on the content of glycerol when the water content was constant. During thermal processing under either acidic or alkaline conditions, glycerol was unlikely to thermally cross-link with WG as suggested previously. The advanced mechanical performance of the WG-wg materials was attributed to the nature of hydrogen-bonding interactions between glycerol and WG components in the materials. This caused the whole material to behave like a strengthened "cross-linked" structure at room temperature due to the low mobility of glycerol. The pH effect on phase mobility and compositions of WG-wg systems was not as significant as that for WG-w materials.

Biopolymers↗

PubMed2000

Properties of chemically and physically treated wheat gluten films.

Chemical (vapors of formaldehyde), physical (temperature, UV and gamma radiation), and aging treatments were applied to wheat gluten films. Changes in film mechanical properties, water vapor permeability, solubility, and color coordinates were investigated. An aging of 360 h led to a 75 and 314% increase in tensile strength and Young's modulus, respectively, and a 36% decrease in elongation. Severe thermal (above 110 degrees C, 15 min) and formaldehyde treatments highly improved the mechanical resistance of the films. Under these conditions, up to 376 and 654% increase in tensile strength and Young's modulus and up to 66% decrease in elongation have been observed. Water solubility was only slightly modified, whereas water vapor permeability was not affected. Color coordinates of films heated above 95 degrees C changed to a great extent. An almost total insolubilization of proteins in sodium dodecyl sulfate occurred for heat- and formaldehyde-treated films, due to the modification of protein network leading to changes in properties of the films.

Chemical Phenomena↗

PubMed2003

Isolation and identification of indigestible pyroglutamyl peptides in an enzymatic hydrolysate of wheat gluten prepared on an industrial scale.

An enzymatic hydrolysate of wheat gluten was further digested in vitro with porcine pepsin and pancreatin to obtain an indigestible peptide. Indigestible pyroglutamyl peptide was isolated from the digest by strong cation-exchange, size-exclusion, and reversed-phase chromatographies. The pyroglutamyl peptide was digested with pyroglutamate aminopeptidase, and the digest was reacted with phenyl isothiocyanate. The resultant phenylthiocarbamyl (PTC) peptides were purified by reversed-phase HPLC by using binary gradient elution with ammonium acetate buffer, pH 6.0, and acetonitrile. The PTC peptides were analyzed with an automatic peptide sequencer on the basis of the Edman degradation method with a modified program. Some pyroglutamyl peptides were also analyzed by fast-atom bombardment ionization mass spectrometry without the pyroglutamate amino peptidase digestion. Consequently, pyroGlu-Asn-Pro-Gln, pyroGlu-Gln-Gln-Pro-Gln, pyroGlu-Gln-Pro-Gln, pyroGlu-Gln-Pro-Gly-Gln-Gly-Gln, pyroGlu-Gln, pyroGlu-Gln-Pro, pyroGlu-Ile-Pro-Gln, pyroGlu-Ile-Pro, pyroGlu-Gln-Pro-Leu, pyroGlu-Gln-Phe-Pro-Gln, pyroGlu-Ser-Phe-Pro-Gln, pyroGlu-Phe-Pro-Gln, and pyroGlu-Gln-Pro-Pro-Phe-Ser were identified.

Amino Acid Sequence↗

PubMed2003

Fluorescence labeling of wheat proteins for determination of gluten hydrolysis and depolymerization during dough processing and sourdough fermentation.

This study was undertaken to enable the determination of hydrolysis and functionality of proteins in situ during fermentation of wheat doughs. Wheat proteins were fractionated and labeled with fluorescein-isothiocyanate (FITC). Fluorescent proteins were incorporated into wheat sourdoughs inoculated with lactobacilli and into neutral and acid control doughs. Doughs containing fungal protease were furthermore evaluated. Doughs were analyzed by extraction and size exclusion chromatography analysis of sodium dodecyl sulfate soluble proteins. Labeled proteins exhibited characteristics comparable to native proteins, with respect to proteolytic degradation and polymerization. Proteolytic breakdown of proteins was enhanced at low pH. Glutenin subunits were incorporated into the gluten macropolymer at neutral pH. Polymerization of FITC proteins was not observed at low pH. Sourdoughs were comparable to acid control doughs, major effects were attributed to changes of pH, rather than microbial metabolism. A synergistic effect with respect to proteolytic activity was observed between fungal protease and L. pontis.

Chromatography↗

PubMed2003

Molecular determinants of the influence of hydrophilic plasticizers on the mechanical properties of cast wheat gluten films.

The influence of a set of hydrophilic plasticizers varying in their chain length (ethyleneglycol and longer molecules) on the tensile strength and elongation at break of cast gluten films was studied. When considered on a molar basis (moles of plasticizer per mole of amino acid), the effect of the different plasticizers depended on their respective molecular weights for plasticizer/amino acid ratios in the range from 0.10 to 0.40. However, above a ratio of 0.40-0.50 mol/mol of amino acid, these differences were abolished and both stress and strain reached a plateau value, with all plasticizers studied. In fact, when a homologous series of molecules was considered, the ability for plasticizer to decrease stress and increase strain was closely related to the number of hydrogen bonds the molecule was able to share with the protein network. Ethyleneglycol's efficiency was, however, lower than expected from its hydrogen-bonding potential; a comparison with other diols demonstrated that this was due to the small size of this molecule. The particular effect of glycerol concentration on the films' mechanical properties suggested that other molecular features of the plasticizer, such as the number and position of hydroxide groups in the molecule, were involved in the plasticization mechanism.

Ethylene Glycol↗

PubMed2003

Development and characterization of biodegradable films made from wheat gluten protein fractions.

Gliadins and glutenins were extracted from commercial wheat gluten on the basis of their extractability in ethanol and used to produce film-forming solutions. Films cast using these gliadin- and glutenin-rich solutions were characterized. Glycerol was used as a plasticizer, and its effect on the films was also studied. Films obtained from the glutenin fraction presented higher tensile strength values and lower elongation at break and water vapor permeability values than gliadin films. Gliadin films disintegrated when immersed in water. The GAB isotherm model was used to describe the equilibrium moisture sorption of the films. The glycerol concentration largely modified mechanical and water vapor barrier properties of both film types.

Chemical Phenomena↗

PubMed2004

Gluten of spelt wheat (Triticum aestivum subspecies spelta) as a source of peptides promoting viability and product yield of mouse hybridoma cell cultures.

The enzymic hydrolysate of gluten from spelt wheat (Triticum aestivum subsp. spelta), an ancient protein-rich wheat subspecies, was subjected to repeated chromatography runs on the small pore size exclusion chromatography matrix, Biogel P-2. Two small peptide fractions were purified by rechromatography. The amino acid analyses carried out upon total hydrolysis of these fractions have shown a very high proportion of glutamic acid/glutamine, leucine, and methionine. The biological activity of the peptide fractions was tested on a model hybridoma at a concentration range from 0.02 to 0.2%. The most striking effect of peptide fractions, apparent even at the lowest concentrations tested, was a significantly higher persistence of viable cells on day 6, i.e., at the decline phase of the cultures. Culture viability values in the presence of peptide fractions were 64-74%, in comparison with 56% in the control culture. The results of this work are consistent with the concept that peptide molecules may act as antiapoptotic agents, survival factors, rather than serving as metabolic substrates.

Amino Acids↗

PubMed2006

Occurrence of the free and Peptide forms of pyroglutamic acid in plasma from the portal blood of rats that had ingested a wheat gluten hydrolysate containing pyroglutamyl peptides.

In order to determine pyroglutamic acid levels in plasma, we developed a method based on precolumn derivatization of the carboxyl group of pyroglutamic acid with 2-nitrophenylhydrazine. Eight-week-old male SD strain rats were administered 200 mg of an acidic peptide fraction obtained from a commercial wheat gluten hydrolysate containing 0.63 mmol/g pyroglutamyl peptide. After administration, significant amounts of free pyroglutamic acid were observed in the ethanol-soluble fraction of the plasma from the portal vein. In addition, pyroglutamate aminopeptidase digestion of the ethanol-soluble fraction liberated significant amounts of pyroglutamic acid, which indicated the presence of the pyroglutamyl peptide. The presence of the pyroglutamyl peptide in the plasma was further confirmed by size exclusion chromatography. The levels of free and peptide forms of pyroglutamic acid increased significantly and reached a maximum (approximately 40 nmol/mL) at 15 and 30 min after administration, respectively.

Animals↗

PubMed1997

Structural characteristics of corn starches extruded with soy protein isolate or wheat gluten.

Commercially available corn starches containing 0, 25, 50 and 70% amylose were extruded with 10, 20 and 30% soy protein isolate (SPI) or wheat gluten (WG) at 22% moisture content (dry basis) in a C.W. Brabender single screw laboratory extruder using a 140 degrees C barrel temperature and a 140 rpm screw speed. True, solid and bulk densities; percent total, closed and open pores; and shear strengths of the extrudates were determined. The microstructures of the extrudates were studied by scanning electron microscopy (SEM). The total pores of the extrudates were affected significantly (p > F = 0.0001) by type of protein (SPI or WG) and starch amylose. The open or closed pores, were affected by protein type only. The interaction between amylose and protein contents was highly significant (p > F = 0.0001). In general, the total pores and bulk densities were higher for WG-starch extrudates compared to SPI-starch extrudates. These values decreased as amylose content increased from 0 to 25% and then increased thereafter. The open pores, on the other hand, increased with increasing protein content from 10 to 20% and then decreased. Extrudates containing WG had higher shear strengths than those containing SPI.

Amylose↗