Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Fluorenes”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43Linked to original sources

Laboratory studies to characterize the efficacy of sand capping a coal tar-contaminated sediment.

Placement of a microbial active sand cap on a coal tar-contaminated river sediment has been suggested as a cost effective remediation strategy. This approach assumes that the flux of contaminants from the sediment is sufficiently balanced by oxygen and nutrient fluxes into the sand layer such that microbial activity will reduce contaminant concentrations within the new benthic zone and reduce the contaminant flux to the water column. The dynamics of such a system were evaluated using batch and column studies with microbial communities from tar-contaminated sediment under different aeration and nutrient inputs. In a 30-d batch degradation study on aqueous extracts of coal tar sediment, oxygen and nutrient concentrations were found to be key parameters controlling the degradation rates of polycyclic aromatic hydrocarbons (PAHs). For the five PAHs monitored (naphthalene, fluorene, phenanthrene, anthracene, and pyrene), degradation rates were inversely proportional to molecular size. For the column studies, where three columns were packed with a 20-cm sand layer on the top of a 5 cm of sediment layer, flow was established to sand layers with (1) aerated water, (2) N(2) sparged water, or (3) HgCl(2)-sterilized N(2) sparged water. After steady-state conditions, PAH concentrations in effluents were the lowest in the aerated column, except for pyrene, whose concentration was invariant with all effluents. These laboratory scale studies support that if sufficient aeration can be achieved in the field through either active and passive means, the resulting microbially active sand layer can improve the water quality of the benthic zone and reduce the flux of many, but not all, PAHs to the water column.

Biodegradation, Environmental↗

Polycyclic aromatic hydrocarbons in marine organisms from the Adriatic Sea, Italy.

Polycyclic aromatic hydrocarbons (PAHs) were analyzed in bivalves (Mitylus galloprovincialis), cephalopods (Todarodes sagittatus), crustaceans (Nephrops norvegicus) and fish (Mullus barbatus, Scomber scombrus, Micromesistius poutassou, Merluccius merluccius) in several pools coming from the Central Adriatic Sea. These marine organisms were selected because of their multitude, wide distribution and common use in the Italian diet, they were sampled and analyzed during the year 2004. Acenaphthene, benzo(a)pyrene, dibenz(a,h)anthracene, benzo(ghi)perylene and indeno(1,2,3-cd)pyrene showed levels below the instrumental detection limit in all samples. Fluorene, phenanthrene, anthracene, fluoranthene, benz(a)anthracene, benzo(b)fluoranthene and benzo(k)fluoranthene were detected at different concentrations in analyzed samples. Chrysene was detected only in mussels with very low values (average 0.74ngg(-1) wet weight). PAHs composition pattern was dominated by the presence of PAHs with 3-rings (62%) followed from those with 4-rings (37%) and 5-rings (1%). Atlantic mackerel, European hake and blue whiting showed the highest PAH concentrations, ranging from 44.1 to 63.3ngg(-1) wet weight, the group of invertebrate organisms showed a level of contamination about three times lower than those of the vertebrate groups. Mediterranean mussels that did not present very high levels of contamination expressed as sum of PAHs showed one of the highest values of benzo(a)pyrene equivalents (BaPEs). Conversely the latter value was very low in Atlantic mackerel even if this species reported the highest total PAH concentrations. No significant correlation was observed between weight, length and trophic levels and total PAHs.

Animals↗

Performance of the partition-limited model on predicting ryegrass uptake of polycyclic aromatic hydrocarbons.

Accurate modeling of the uptake and accumulation behavior of organic contaminants like polycyclic aromatic hydrocarbons (PAHs) in plants is essential to assess crop contamination and subsequent human exposure. In this study, the performance of a partition-limited model on predicting ryegrass uptake of PAHs (acenaphthene, fluorene, phenanthrene and pyrene) from water was evaluated and the major factors were examined. It was found that model predictions of PAH concentrations in roots and shoots of ryegrass were all within an order of magnitude of the observed values with the differences between estimated and measured concentrations less than 42.1% for roots and 78.4% for shoots. Since the model considered soil/water-plant pathway only, it was inevitable that simulated concentrations in shoots suffered a bigger error than those in roots due to the influence of foliar uptake, the other important pathway for PAHs. If the impact of foliar uptake was excluded, the accuracy of simulated shoot concentrations would be greatly enhanced, with the maximum prediction error reduced from 78.4% to 47.1% for pyrene. Other factors aside from foliar uptake were also examined, including aqueous PAH concentrations, uptake time, plant composition and chemical properties. These factors were found to influence the model performance generally through acting on the quasi-equilibrium factor (alpha(pt)). Results from this study substantiated the utility of this partition-limited model for vegetation-uptake assessment, and then provided some testimony valuable for the modification of a model with a better performance.

Lolium↗

Applicability of the bioluminescence inhibition test in the 96-well microplate format for PAH-solutions and elutriates of PAH-contaminated soils.

The use of conventional plastic microplates for a miniaturised luminescent bacteria test may result in an underestimation of the toxicity for poorly water soluble highly adsorbing toxicants such as PAHs. In this study, the suitability of microplates for testing elutriates of PAH-contaminated soils was investigated. The LUMIStox test was performed as the standard test in the miniaturised format using contaminated soil elutriates and aqueous solutions of four selected PAHs (viz. naphthalene (NAP), acenaphthene (ACE), fluorene (FLU), and phenanthrene (PHE)). For the aqueous PAH-solutions, we observed reduced light inhibition values for the miniaturised bioassay when using black microplates made of polypropylene (PP) and polystyrene (PS) compared to the standard LUMIStox test. This phenomenon was most likely due to adsorption of toxicants to the microplate surfaces with PAHs of lower water solubility being significantly more affected; however, after minimizing the exposure of samples to plastic surfaces, polystyrene microplates revealed equivalent performance (>80% 'relative' light inhibition) to the standard glass cuvette test system. For soil elutriates, black microplates again exhibited slightly lower light inhibition values while white plates made of PS and Barex resulted in a pronounced overestimation of toxicity for a coloured soil elutriate. In general, microplates were applicable for testing elutriates of PAH-contaminated soils. In cases where samples are coloured or turbid, the application of black microplates is recommended.

Aliivibrio fischeri↗

Gas chromatographic-mass spectrometric determination of polycyclic aromatic hydrocarbons formed during the pyrolysis of phenylalanine.

The formation of polycyclic aromatic hydrocarbons (PAHs) during pyrolysis process of phenylalanine had been studied. Ten PAHs, including fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo[a]anthracene, chrysene, benzo[k]fluoranthene, benzo[e]pyrene, and benzo[a]pyrene were analyzed by gas chromatography-mass spectrometry using selective ion monitoring mode. This technique offers the capability to analyze trace amounts of PAHs in phenylalanine pyrolyzates. The pyrolysis was carried out in a micro-furnace with quartz furnace liner. The injection was conducted with glass pelletizer syringe to avoid metal contamination. Qualitative results were obtained at 900 degrees C and quantitative analysis of 10 PAHs was done for 700 and 900 degrees C.

Gas Chromatography-Mass Spectrometry↗

In vitro and in vivo comparisons of fish-specific CYP1A induction relative potency factors for selected polycyclic aromatic hydrocarbons.

Induction of cytochrome P450 (CYP1A), as measured by liver ethoxyresorufin-O-deethylase (EROD) activity in juvenile rainbow trout (Oncorhynchus mykiss), was used to derive relative potency factors (RPFs) for several polycyclic aromatic hydrocarbons (PAHs), chosen for their induction potency in a rainbow trout liver cell line (RTL-W1). Potency for causing induction was estimated as the median effective concentration (EC50) from exposure-response curves. With the exception of phenanthrene, all PAHs tested induced EROD activity in juvenile trout, ranked as: benzo[k]fluoranthene>benzo[b]fluoranthene>benzo[b]fluorene>beta-napthoflavone>retene (7-isopropyl-1-methylphenanthrene). When induction potency was expressed relative to benzo[k]fluoranthene, RPFs ranged from 0.02 to 1, and the rank order in vivo was identical to the rank order with RTL-W1-derived values. The additivity of PAHs in mixtures in RTL-W1 cells was compared to whole-fish results from a previous study. EROD induction showed additive interactions for PAHs with exposure-response curves of similar slopes. This study demonstrates that assays of CYP1A induction using rainbow trout liver cells in culture would be a convenient substitute for assays with whole fish as part of testing programs for risk assessment of PAHs.

Animals↗

Inhibition of the antigen-induced activation of RBL-2H3 cells by cetiedil and some of its analogues.

Our previous studies on rat basophilic leukaemia (RBL-2H3) cells suggested that IK(Ca) channels similar to those in red blood cells (RBC) may be involved in the antigen-induced beta-hexosaminidase release. Since cetiedil blocks these channels in both cell types, we studied the inhibition by a selection of the synthetic analogues of cetiedil (UCL compounds) of antigen-induced beta-hexosaminidase release and 86Rb(+)-efflux from RBL-2H3 cells. We tested the (+)- and (-)-enantiomers of cetiedil (UCL 1348 and UCL 1349), the more lipophilic triphenylacetic acid derivatives (UCL 1495 and UCL 1617) and (9-benzyl-fluoren)-9-yl derivatives (UCL 1608 and UCL 1710). They all inhibited antigen-induced beta-hexosaminidase release and 86Rb(+)-efflux. Their relative potency in inhibiting antigen-induced beta-hexosaminidase release was UCL 1608>1710>1617>1348>1349>1495, with IC(50) values of 9.6+/-0.6, 14.4+/-2.2, 23.4+/-1.4, 29.8+/-1.1, 77.5+/-11.8 and 104.6+/-14.7 (microM), respectively. These IC(50)s suggest some dissimilarity between IK(Ca) in RBL-2H3 cells and RBC. Lipophilicity and potency were well correlated in RBC, but not in RBL-2H3 cells.

Animals↗

Degradation of polycyclic aromatic hydrocarbons by a bacterial consortium enriched from mangrove sediments.

The biodegradability of a polycyclic aromatic hydrocarbons (PAHs) mixture consisted of fluorene (Fl), phenanthrene (Phe) and pyrene (Pyr) by a bacterial consortium enriched from mangrove sediments under sediment-free and sediment slurry conditions was investigated. The enriched consortium made up of three bacterial strains, namely Rhodococcus sp., Acinetobacter sp. and Pseudomonas sp., had a good PAH degradation capability with 100% degradation of Fl and Phe in sediment-free liquid medium after 4 weeks of growth. The Fl and Phe degradation percentages in sediment slurry were higher than that in liquid medium. Autochthonous microorganisms in sediments also possessed satisfactory PAH degradation capability and all three PAHs were almost completely degraded after 4 weeks of growth. Bioaugumentation (inoculation of the enriched consortium to sediments) showed a positive effect on PAH biodegradation after 1 week of growth. Complete biodegradation of pyrene took longer time than that for Fl and Phe, indicating the enriched bacterial consortium had preference to utilize low-molecular weight PAHs.

Acinetobacter↗

Reference range levels of polycyclic aromatic hydrocarbons in the US population by measurement of urinary monohydroxy metabolites.

We developed a gas chromatography isotope-dilution high-resolution mass spectrometry (GC/ID-HRMS) method for measuring 14 polycyclic aromatic hydrocarbon (PAH) metabolites representing seven parent PAHs in 3 mL of urine at low parts-per-trillion levels. PAH levels were determined in urine samples collected in 1999 and 2000 from approximately 2400 participants in the National Health and Nutrition Examination Survey, and, for the first time, reference range values were calculated for these metabolites in the US population. Using this GC/ID-HRMS method, we found detectable concentrations for monohydroxy metabolite isomers of fluorene, phenanthrene, fluoranthene, pyrene, and chrysene, benzo[c]phenanthrene, and benz[a]anthracene. Some monohydroxy metabolite isomers of benzo[c]phenanthrene, chrysene, and benz[a]anthracene exhibited low detection frequencies that did not allow for geometric mean calculations. Our study results enabled us to establish a reference range for the targeted PAHs in the general US population.

Adolescent↗

The importance of both charge exchange and proton transfer in the analysis of polycyclic aromatic compounds using atmospheric pressure chemical ionization mass spectrometry.

The response of atmospheric pressure chemical ionization (APCI) mass spectrometry to selected polycyclic aromatic compounds (PACs) was examined in a Micromass Quattro atmospheric pressure ion source as a function of both solvents and source gases. Typical PACs found in petroleum samples were represented by mixtures of naphthalene, fluorene, phenanthrene, pyrene, fluoranthene, chrysene, triphenylene, perylene, carbazole, dibenzothiophene, and 9-phenanthrol. A large range of different gases in the APCI source was studied, with emphasis on nitrogen, air, and carbon dioxide. Solvents used included water-acetonitrile, acetonitrile, dichloromethane, and hexanes. The signal responses were dependent on both the gases and solvents used, as was the ionization mechanism, as indicated by the degree of protonation with respect to the level of charge exchange. The combination of carbon dioxide in the nebulizer gas stream with nitrogen in the other streams gave a three- to fourfold better sensitivity than using nitrogen alone for both test mixtures and for complex samples.

Journal Article↗

Studies on the positive-ion mass spectra from atmospheric pressure chemical ionization of gases and solvents used in liquid chromatography and direct liquid injection.

Detailed studies have been made using different source gases and solvents in a Micromass Quattro mass spectrometer under positive ion atmospheric pressure chemical ionization conditions. The major background ions from nitrogen, air, or carbon dioxide were investigated by tandem mass spectrometry, followed by similar studies on solvents commonly employed in normal- and reversed-phase high-performance liquid chromatography, namely, water-acetonitrile, acetonitrile, and dichloromethane, with nitrogen, air, or carbon dioxide; hydrocarbon solvents were studied using nitrogen. Spectra were interpreted in terms of the gases, solvents, and their impurities. The acetonitrile spectra provided clear evidence for both charge exchange and proton transfer, the former being facilitated by the introduction of some air into a flow of nitrogen. Radical cations of acetonitrile dimers, trimers, and tetramers were observed, as were protonated dimer and trimer species. Examination of the analytical response of four polycyclic aromatic hydrocarbons in various hydrocarbon solvents, with nitrogen gas, showed that the sensitivity of detection for an analyte and its ionization mechanism are dependent on both the analyte structure and the solvent, with pyrene showing the highest sensitivity, phenanthrene and fluorene being intermediate, and naphthalene having the lowest sensitivity. The degree of protonation followed the same trend. Signal intensity and degree of protonation were dependent on the alkane solvent used, with isooctane providing the best overall sensitivity for the sum of protonated molecules and molecular ions. The ions observed in these studies appeared to be the most stable ions formed under equilibrium conditions in the source.

Journal Article↗

Selective adsorption of refractory sulfur species on active carbons and carbon based CoMo catalyst.

Adsorption technique could be a reliable alternative in removing to a certain remarkable extent the sulfur species from the feedstock of petroleum oil. The performance of various carbons on adsorption of model sulfur compounds in a simulated feed solution and the sulfur containing compounds in the real gas oil was evaluated. The adsorption experiments have been carried out in a batch scale at ambient temperature and under the atmospheric pressure. In general, the most refractory sulfur compounds in the hydrotreatment reactions were selectively removed and adsorbed. It was found that the adsorbents affinities to dibenzothiophene and 4,6-dimethyldibenzothiophene were much more favored and pronounced than the aromatic matrices like fluorene, 1-methylnaphthalene and 9-methylanthracene. Among the sulfur species, 4,6-dimethyldibenzothiophene was the highest to be removed in terms of both selectivity and capacity over all the present adsorbents. The studied adsorbents showed significant capacities for the polyaromatic thiophenes. The electronic characteristics seem to play a certain role in such behavior. Regeneration of the used adsorbent was successfully attained either by washing it with toluene or by the release of the adsorbates through heat treatment. A suggested adsorptive removal process of sulfur compounds from petroleum distillate over carbon supported CoMo catalyst was discussed.

Journal Article↗

Particulate polycyclic aromatic hydrocarbons and n-alkanes in recycled paper processing operations.

The aliphatic and polycyclic aromatic fractions of dust collected in the vicinity of recycled paper processing operations were analyzed using gas chromatography/mass spectrometry. Total measured dust concentration (up to 8.73+/-2.02 mg/m3) fluctuated substantially in the different steps of paper manufacture. This was attributed to the type of the operation such as, the release of fibers and particles during paper cutting and the use of reactive chemicals and excessive water under high temperature and pressure during the bleaching and the water rinsing/drying step. Particulate polycyclic aromatic hydrocarbons (PAHs) (from fluorene to benzo[ghi]perylene with mean concentrations from 3.8+/-0.5 to 41.4+/-0.4 ng/m3) and the unresolved mixture of branched, cyclic and unsaturated hydrocarbons (UCM) were measured in all samples while, n-alkanes from n-C20 to n-C27, were only observed in cutting and packaging areas (from 180.6+/-18.9 to 4297.9+/-794.9 ng/m3). The profile of occupational PAHs in bleaching and treatment of contaminated recycled raw paper was comparable to that observed for anthropogenic activities. The values of molecular diagnostic ratios indicated the contribution of oil residues and emissions from worklifts and other equipment used for pulp and paper handling. Total benzo[a]pyrene-equivalent (BaP) concentrations of particulate PAHs (varied from 323 up to 1104 pg/m3), provided evidence that workers were exposed to high quantities of PAHs as compared with exposures to urban air and other indoor settings, posing long-term threat to their health.

Alkanes↗

Pollution patterns of polycyclic aromatic hydrocarbons in tobacco smoke.

Concentrations of polycyclic aromatic hydrocarbons (PAHs) in tobacco smoke of 12 commercial brand cigarettes were determined in a simulated chamber of 20.25 m3 in size. The total concentrations of 17 PAHs (summation operatorPAHs) in the chamber were 3500 and 1152 ng/m3 in vapor phase and particulate phase, respectively. In vapor phase, the yield of naphthalene (NA) appeared to be the most abundant (2462 ng/cig) followed by fluorene (FLUOR) and acenaphthylene (ACY), while the yield of benzo[ghi]perylene (BP) was the most abundant (259.7 ng/cig) in particulate phase followed by phenanthrene (PHEN) and FLUOR. The proportion of PAHs in particulate phase increased with increasing molecular weight. PAHs with two to six rings accounted for 40.2%, 35.3%, 11.7%, 7.6%, 5.2% of summation operatorPAHs, respectively. There was no obvious correlation between PAHs, benzo[a]pyrene (BaP) concentrations in tobacco smoke and smoking tar contents, nicotine contents. With the source fingerprint of PAHs in tobacco smoke, NA could be regarded as the marker of tobacco smoke source because of its largest contribution to summation operatorPAHs (40.2%), followed by FLUOR (12.7%) and ACY (9.8%). Further study indicated that more than 80% of BaP in indoor air of resident homes in Hangzhou was from tobacco smoke.

Air Pollution, Indoor↗

Gas-particle concentration and characterization of sources of PAHs in the atmosphere of a suburban area in Athens, Greece.

Atmospheric polycyclic aromatic hydrocarbons (PAH) were determined in two places in a suburban area of Athens greater area (AGA) during June and November 2003. Fourteen PAHs were quantified in the collected samples. The total concentration in the gas phase ranged between 6.89 and 124ngm(-3), while in the particulate phase between 0.44 and 13.2ngm(-3). Maximum concentrations of the total PAHs (gas and particulate phase) were observed during the cold period with an average of 40.7ngm(-3). PAHs were correlated with NO, NO(2) and O(3), wind speed, wind direction and temperature. Positive correlation was observed between PAHs and NO, NO(2), while negative correlation was detected between PAHs and O(3). The most abundant members were phenanthrene, anthracene, fluorene, fluoranthene and pyrene. Potential sources of PAHs in aerosols were investigated using molecular diagnostic ratios, which reflect sources such as diesel and gasoline engines, although other sources such as coal combustion and liquefied petroleum gas also contributed.

Air Pollutants↗

Partitioning of polycyclic aromatic hydrocarbons between water and particles compared to bioaccumulation in mussels: a harbour case.

Water and particles from three sites located in Halifax Harbour, near and further away from combined municipal sewage effluents (CMSE) were analysed for parental and alkylated polycyclic aromatic hydrocarbons (par and alkPAH). Bioavailability of PAH was compared for inter-tidal mussels collected at the same sites in April and November. The PAH fingerprint determined over 9 sampling times covering a period of 19 months differed more between phases (water and particles) and seasons, than between sites. In the spring, more alkPAH associated with diesel and gasoline were detected in the soluble phase, along with more bioaccumulation of alkPAH in inter-tidal mussels. A broader number of parPAH were detected in mussels collected in the fall. The mean sum of dissolved alkPAH concentrations was higher in water at the site closer to raw CMSE than at the other two sites and particles of that site. However, lowest bioconcentration factors (BCF) were determined in mussels of this more contaminated site. Similar biota-particle accumulation factors (BPAF) were determined for parPAH in mussels from the three sites, all lower than the BCF of alkPAH. The study indicates that sewage treatment plants will reduce the amount of parPAH especially larger than fluoranthene and pyrene from being deposited in the harbour; that alk naphthalenes and fluorenes present in water will continue to be discharged; that the disturbance of sediments can make particle-bound PAH available to mussels.

Animals↗

Natural attenuation, biostimulation and bioaugmentation on biodegradation of polycyclic aromatic hydrocarbons (PAHs) in mangrove sediments.

The biodegradability of a mixture of PAHs, namely fluorene (Fl), phenanthrene (Phe) and pyrene (Pyr), in mangrove sediment slurry was investigated. At the end of week 4, natural attenuation based on the presence of autochthonous microorganisms degraded more than 99% Fl and Phe but only around 30% of Pyr were degraded. Biostimulation with addition of mineral salt medium degraded over 97% of all three PAHs, showing that nutrient amendment could enhance Pyr degradation. Bioaugmentation with inoculation of a PAH-degrading bacterial consortium enriched from mangrove sediments did not show any promotion effect and the degradation percentages of three PAHs were similar to that by natural attenuation. Some inhibitory effect was observed in bioaugmentation treatment in week 1 with only 50% Fl and 70% Phe degraded. These results indicate that autochthonous microbes may interact and even compete with the enriched consortium during PAH biodegradation. Natural attenuation appeared to be the most appropriate way to remedy Fl- and Phe-contaminated mangrove sediments while biostimulation was more capable to degrade Pyr-contaminated sediments. The study also shows that although a large portion of the added PAHs (more than 95%) was adsorbed onto the sediments at the beginning of the experiment, most PAHs were degraded in 4 weeks, suggesting that the degraders could utilize the adsorbed PAHs efficiently.

Analysis of Variance↗

Iodinated tracers for imaging amyloid plaques in the brain.

Excessive amounts of protein deposits, beta-amyloid (Abeta) plaques, are commonly detected in the postmortem brains of Alzheimer's disease (AD) patients. These Abeta plaques are believed to play an important role in the pathogenesis of the disease. Development of Abeta plaque-specific imaging agents for detecting and monitoring the changes of Abeta plaque deposition in living brains are reported. These agents, if successfully developed, may serve as potential biomarkers for the disease. Several iodinated derivatives based on variety of core structures are labeled with radioiodine as single photon emission computed tomography (SPECT) imaging agents. Thioflavin (or benzothiazole) derivatives displayed excellent in vitro characteristics with high binding affinities for Abeta aggregates (in subnanomolar to nanomolar range) and excellent plaque labeling of AD brain sections. However, the in vivo kinetic properties appeared unfavorable for further development. A novel series of imidazo-pyridine derivative, such as 2-(4'-dimethylaminophenyl)-6-iodo-imidazo[1,2-a]pyridine (IMPY), exhibited highly desirable in vivo properties. Additional structural modification resulting in stilbene derivatives displayed good binding affinities for Abeta aggregates. In addition, fluorene compounds with a rigid tricyclic structure showed in vitro and in vivo characteristics as potential SPECT imaging agents. Criteria for selection of radioiodinated tracers with suitable in vivo properties to detect amyloid plaques are discussed.

Alzheimer Disease↗