Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Extraction and Processing Industry”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43Linked to original sources
PubMed2003

Sonolytic debromination of ambroxol process wastewater.

In this study ultrasound was examined in terms of its effectiveness in treating wastewater containing ambroxol and process water from ambroxol synthesis. The organic bromine contents of the water samples investigated were in the 20-1200 mg l(-1) range. Ultrasound is capable to debrominate the ambroxol molecule rendering it biologically degradable. The debromination rate increases with the ultrasound intensity and the 0.4 order of the organic bromine concentration. Temperature and pH have only a small influence. Bromide ions reduce the debromination efficiency of the ultrasound. No removal of the organic carbon could be observed during ultrasonic treatment. The process water from ambroxol syntheses shows higher sonolytical debromination rates than the ambroxol model water. After extracting the process water with butyl acetate, the debromination reaction of the remaining organic bromine is considerably smaller. Argon increases the debromination under certain circumstances. The specific electric energy requirements for sonolysis vary between 7 and 920 kWh g(-1) of removed organic bromine.

Ambroxol↗
PubMed2006

Comparative assessment of technologies for extraction of artemisinin.

This paper describes results of a multiobjective comparative assessment of several established and emerging technologies for extraction of a natural antimalarial substance, artemisinin. Extractions by hexane, supercritical carbon dioxide, hydrofluorocarbon HFC-134a, ionic liquids, and ethanol were considered. Hexane extraction is an established technology and appears to be the most cost-effective. However, it is characterized by lower rates and efficiency of extraction than all other considered techniques and is also worse in terms of safety and environmental impact. Similarly, EtOH extraction was found to be worse than hexane in all assessment parameters. The new technologies (scCO2, HFC, and ILs) are based on nonflammable solvents and are characterized by faster extraction cycles and more complete extraction of the useful substances and enable continuous extraction processes with reduced solvent inventory. Ionic liquid and HFC-134a technologies show considerable promise and should be able to compete with hexane extraction in terms of cost-effectiveness following due process optimization. New technologies are also considerably safer (no risk of explosions, low toxicity) and greener (having a lower environmental impact in use, potential for biodegradability after use). The methodology of comparative assessment of established and emerging technologies is discussed.

Antimalarials↗
PubMed2003

Degradation of xenobiotic substances using sulfate-reducing bacteria in a UASB reactor.

An upflow anaerobic sludge blanket (UASB) reactor was successfully applied to continuous degradation of ferric ethylene diamine tetraacetate (Fe-EDTA) as a typical xenobiotic substance contained in photo-processing wastewater. The sludge in the UASB reactor had an abundance of sulfate-reducing bacteria (SRB), which had been anaerobically cultivated in a sulfate-rich culture medium including Fe-EDTA and yeast-extract as the carbon sources. Since the prominent reductions of Fe-EDTA and sulfate ion were observed, the contribution of SRB to Fe-EDTA degradation in the UASB reactor was confirmed. The aggregated sludge in the UASB reactor became gradually large reaching steady state with an equivalent diameter of 60-90 microm after 124 days operation. An increase of the amount of yeast extract addition to feed solution improved the Fe-EDTA removal efficiency up to 90%. Moreover, the combination of ozone treatment with SRB treatment further improved removal efficiency of total organic carbon (TOC) in an actual photo-processing wastewater composed of fixing and developing wastes.

Bacteria↗
PubMed1975

Carcinogenic N-nitro-dimethylamine from the reaction of the analgesic amidopyrine and nitrite extracted from foodstuffs.

The reaction of the analgesic amidopyrine (100 mg) with nitrite extracted from cured meats and from spinach in varying degrees of spoilage was studied. Unde physiological conditions the carcinogenic dimethylnitrosamine was formed at milligram levels at nitrite concentrations as low as 4 mg (in 175 ml extracted from 100 g boiled ham). The rate of decrease in concentration in the human stomach after ingestion of amidopyrine and of nitrite contained in boiled ham or in a broth from boiled ham was also measured.

Aminopyrine↗
PubMed1997

Large-scale high-performance liquid chromatography of enzymes for food applications.

Processes for the production of food-grade enzymes must be cost-effective. Fortunately, most enzymes manufactured for food applications are not required to be highly purified. However, enzymes are considered additives and thus the concentration of DNA and other extraneous materials must be within FDA guidelines. Developing efficient, low-cost, large-scale HPLC methods for food applications is becoming more feasible with the introduction of new HPLC tools and technologies. Enzymes can be successfully separated from cell extracts by size-exclusion and ion-exchange HPLC using optimal gradient elution programs for the latter. Large-scale HPLC methods developed for the purification of some significant food enzymes are discussed in this paper.

Chromatography, High Pressure Liquid↗
PubMed1994

Occupational asthma in a latex doll manufacturing plant.

BACKGROUND: Occupational asthma caused by latex has been reported in health care workers and workers in glove manufacturing plants. OBJECTIVE: We report occupational asthma from latex in a newly identified occupational setting, a latex doll manufacturing plant. METHODS: We evaluated an index case of asthma associated with work in a latex doll manufacturing plant by performing a workplace challenge and evaluating the work environment. We then performed an occupational survey and skin testing of 22 workers in the doll manufacturing plant. RESULTS: The patient, a 21-year-old woman, had severe immediate bronchospasm within minutes of beginning a workplace challenge where sanding of latex parts was performed. Two of 22 workers surveyed (including the patient) reported flushing, rhinoconjunctivitis, and wheezing on exposure to sanded doll parts. These two workers were the only subjects surveyed to have a history of atopy and positive immediate-type skin test responses to a raw latex extract and to common aeroallergens. CONCLUSIONS: Sanding or grinding of solid latex during the manufacturing process may result in a significant incidence of occupational asthma and rhinoconjunctivitis from latex sensitization. Atopic workers appear to be most susceptible to developing latex sensitivity in this setting.

Adult↗
PubMed1987

Recent developments in the design and construction of facilities for the production of human injectables.

The pressures imposed upon pharmaceutical production managers are such that insufficient time is available to plan and develop new pharmaceutical facilities. Standards and codes of practice are available but the relevant data is not presented in a form which would enable the reader to readily access. This paper attempts to highlight the relevant extracts and to visually demonstrate some practical proprietary solutions. It is acknowledged that in some aspects the designer will find it necessary to deviate from the Code and the Standards in the interests of achieving a practical process solution. This paper will provide an awareness of the necessary design parameters such that any deviation judgements have been fully considered.

Drug Industry↗
PubMed2006

Use of bone meal amendments to immobilise Pb, Zn and Cd in soil: A leaching column study.

The aim of this study is to test the stabilisation of metals in contaminated soils via the formation of low-solubility metal phosphates. Bone apatite, in the form of commercially available bone meal, was tested as a phosphate source on a mine waste contaminated made-ground with high levels of Pb, Zn and Cd. Triplicate leaching columns were set up at bone meal to soil ratios of 1:25 and 1:10, in addition to unamended controls, and were run for 18 months. The columns were irrigated daily with a synthetic rain solution at pH of 2, 3, and 4.4. After 100 days, the leachate Pb, Zn and Cd concentrations of all amended columns were significantly reduced. For 1:10 treatments, release of these metals was suppressed throughout the trial. For 1:25 treatments, Zn and Cd concentrations in the leachates began to increase after 300 days. DTPA and water extractions showed that Pb and Cd were more strongly held in the amended soils. This study concludes that the complexity of soil processes and the small quantities of metals sequestered precluded determination of a metal immobilisation mechanism.

Adsorption↗
PubMed2006

Mass spectrometry in the analysis of grape and wine proteins.

Wine proteins play an important role in the quality of wine, because they affect taste, clarity and stability of product. The majority of wine proteins are in the range of 20-30 kDa. Different mass spectrometry (MS) techniques have been successfully applied to study the grape and wine proteins. By liquid chromatography (LC) electrospray ionization (ESI) MS and nano-LC/MS, nine dipeptides and 80 peptides were unambiguously identified in Champagne and Sauvignon Blanc wines, respectively. Using matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF) and surface-enhanced laser desorption/ionization TOF, the protein and peptide fingerprints in Chardonnay, Sauvignon Blanc and Muscat of Alexandria wines were determined. MALDI-TOF identified the mesocarp proteome of six Vitis grape varieties. Proteins in different grape tissue extracts were also studied. The major grape pathogenic-related proteins are chitinases and thaumatin-like proteins, which both persist through the vinification process and cause hazes and sediments in bottled wines. ESI-MS, LC/ESI-MS and MALDI-TOF analysis of these proteins in grape and wine were also used to characterize different grape varieties.

Food Industry↗
PubMed1999

Detection of chlorophenolics in effluents from bleaching processes of rice-straw pulp.

A number of chlorinated derivatives of phenols, catechols, guaiacols, syringaldehydes, have been detected and their concentrations estimated, using gas chromatography in the chlorination (C) and extraction (E) stage of spent bleach liquor generated in the laboratory by bleaching rice-straw soda pulp. The concentration of various compounds detected have also been compared with their reported 96LC50 values.

Animals↗
PubMed2006

A low-cost fermentation medium for thermophilic protease production by Streptomyces sp. 594 using feather meal and corn steep liquor.

Protease production by Streptomyces sp. 594 was obtained after submerged fermentation (SF) and solid-state fermentation (SSF) using feather meal (FM) and corn steep liquor (CSL) as sole sources of carbon and nitrogen. Enzyme productions were 13.4 U ml(-1) in SF and 21.5 U g(-1) in SSF; these values were approximately 86% and 39% higher, respectively, than those obtained previously when yeast extract was used in place of CSL. The proteases, which belong to the serine and metalloproteinase classes, were active at high temperatures (55 degrees C to 90 degrees C) and over a wide range of pH values (5.0 to 10.0). Thus, these thermophilic proteases have shown interesting properties for industrial purposes. As far as we are concerned, this is the first contribution toward the microbial production of thermophilic proteases by a streptomycete using a low-cost medium composed of industrial poultry (FM) and corn processing by-products (CSL).

Animals↗
PubMed2006

Determination of metabolic flux changes during fed-batch cultivation from measurements of intracellular amino acids by LC-MS/MS.

Metabolic flux analysis using (13)C-labeled substrates is a well-developed method for investigating cellular behavior in steady-state culture condition. To extend its application, in particular to typical industrial conditions, such as batch and fed-batch cultivations, a novel method of (13)C metabolic flux analysis is proposed. An isotopomer balancing model was developed to elucidate flux distributions in the central metabolism and all amino acids synthetic pathways. A lysine-producing strain of Escherichia coli was cultivated by fed-batch mode in a growth medium containing yeast extract. Mass distribution data was derived from both intracellular free amino acids and proteinogenic amino acids measured by LC-MS/MS, and a correction parameter for the protein turnover effect on the mass distributions of intracellular amino acids was introduced. Metabolic flux distributions were determined in both exponential and stationary phases. Using this new approach, a culture phase-dependent metabolic shift was detected in the fed-batch culture. The approach presented here has great potential for investigating cellular behavior in industrial processes, independent of cultivation modes, metabolic phase and growth medium.

Amino Acids↗
PubMed2003

Evaluation of pesticide uptake by Lupinus seeds.

Pesticide uptake by seeds depends on the properties of the chemical, such as structure, stability, log k(ow) and diffusion rate, type of water, pH, temperature, content of organic matter and composition, and on seed characteristics such as permeability of the seed coat. The efficiency with which Lupinus angustifolius seeds retain different herbicides (simazine, atrazine, isoproturon, linuron,) and insecticides (carbaryl, fenamiphos, permethrin) was evaluated using both a batch and a continuous system. Factors which affect pesticide uptake by seeds, such as flow rate, seed biomass, pesticide concentration, contact time, pH, seed saturation and also the speed of the retention process for 17 days, were tested. L. angustifolius showed a high retention capacity for the above mentioned pesticides. The extraction of pesticides from seeds using different organic solvents, such as methanol, acetonitrile, ethyl acetate and n-hexane was evaluated and no pesticide residues were detected in any of the solvents tested. This could be attributed to the capacity of the seed to degrade the pesticides. From the results obtained, L. angustifolius seems to be a promising seed to be applied for phytoremediation of industrial effluents or contaminated water.

Biodegradation, Environmental↗
PubMed1995

Up to 50 X SAS performance gains on large data volumes using scalable parallel computing.

Turning large volumes of historical data into valuable information to support the decision making process of management is a growing need of corporations in the 90s. However, the ability to perform fast data reduction on large data volumes is limited by traditional computer systems that can take hours of CPU time and days of elapsed time to process multi-gigabyte data sets. This paper describes how one of my customers in the health care industry addressed the volume issue in health decision support processing and improved the end user's tool sets. The paper describes the problems encountered while trying to achieve their business goals and the hardware and software solution implemented to resolve these problems. Actual performance numbers are given for Tabulate, Select, 3-way Join, Nested Select Queries, and a multiple user test. With up to 50 X faster query turn-around times on large data volumes, productivity was increased by: 1) allowing users to extract valuable information with queries that could not be run before; 2) reducing the cost of data analysis; 3) providing users with more elaborate reporting and greater versatility due to SAS and the new client/server environment; and 4) improving overall business with more timely, accurate, and cost-effective results.

Computer Communication Networks↗
PubMed2004

Refining sweet sorghum to ethanol and sugar: economic trade-offs in the context of North China.

Reducing the use of non-renewable fossil energy reserves together with improving the environment are two important reasons that drive interest in the use of bioethanol as an automotive fuel. Conversion of sugar and starch to ethanol has been proven at an industrial scale in Brazil and the United States, respectively, and this alcohol has been able to compete with conventional gasoline due to various incentives. In this paper, we examined making ethanol from the sugar extracted from the juice of sweet sorghum and/or from the hemicellulose and cellulose in the residual sorghum bagasse versus selling the sugar from the juice or burning the bagasse to make electricity in four scenarios in the context of North China. In general terms, the production of ethanol from the hemicellulose and cellulose in bagasse was more favorable than burning it to make power, but the relative merits of making ethanol or sugar from the juice was very sensitive to the price of sugar in China. This result was confirmed by both process economics and analysis of opportunity costs. Thus, a flexible plant capable of making both sugar and fuel-ethanol from the juice is recommended. Overall, ethanol production from sorghum bagasse appears very favorable, but other agricultural residues such as corn stover and rice hulls would likely provide a more attractive feedstock for making ethanol in the medium and long term due to their extensive availability in North China and their independence from other markets. Furthermore, the process for residue conversion was based on particular design assumptions, and other technologies could enhance competitiveness while considerations such as perceived risk could impede applications.

Bioreactors↗
PubMed2005

Glucoamylase production by solid-state fermentation using rice flake manufacturing waste products as substrate.

Glucoamylase production has been investigated by solid-state fermentation of agro-industrial wastes generated during the processing of paddy to rice flakes (categorized as coarse, medium and fine waste), along with wheat bran and rice powder by a local soil isolate Aspergillus sp. HA-2. Highest enzyme production was obtained with wheat bran (264 +/- 0.64 U/gds) followed by coarse waste (211.5 +/- 1.44 U/gds) and medium waste (192.1 +/- 1.15 U/gds) using 10(6) spores/ml as inoculum at 28 +/- 2 degrees C, pH 5. A combination of wheat bran and coarse waste (1:1) gave enzyme yield as compared to wheat bran alone. Media supplementation with carbon source (0.04 g/gds) as sucrose in wheat bran and glucose in coarse and medium waste increased enzyme production to 271.2 +/- 0.92, 220.2 +/- 0.75 and 208.2 +/- 1.99 U/gds respectively. Organic nitrogen supplementation (yeast extract and peptone, 0.02 g/gds) showed a higher enzyme production compared to inorganic source. Optimum enzyme activity was observed at 55 degrees C, pH 5. Enzyme activity was enhanced in the presence of calcium whereas presence of EDTA gave reverse effect.

Aspergillus↗
PubMed2006

Species-specific identification by inhibitor-controlled PCR of ruminant components contaminating industrial crude porcine heparin.

With the emergence of bovine spongiform encephalopathy, the source of pharmaceutical heparin is currently restricted to porcine intestinal mucosa. To control the species origin of industrial crude heparin, molecular biology methods relying on species-specific protein or DNA analysis should be developed to identify the ruminant components that might be contaminants in industrial crude porcine heparin (ICPH). Because heparin contained in ICPH is a strong PCR inhibitory substance, it is necessary to explore DNA extraction methods specific for ICPH and develop analysis methods that could monitor the presence of PCR inhibitory substances. In the present studies, DNA was extracted from ICPH by seven methods, and their abilities to remove the PCR inhibitory substances were compared using inhibitory-controlled PCR (IC-PCR). The results showed that, based on the optimization of the final concentration of the internal processing control (IPC), IC-PCR was a rapid, sensitive and efficient way to monitor the presence of PCR inhibitory substances contained in DNA extracted from ICPH, and only the agarose gel purification method could be used to completely eliminate the PCR inhibitory substances contained in ICPH.

Animals↗
PubMed2006

An infrastructure for high-throughput microscopy: instrumentation, informatics, and integration.

High-throughput, image-based cell assays are rapidly emerging as valuable tools for the pharmaceutical industry and academic laboratories for use in both drug discovery and basic cell biology research. Access to commercially available assay reagents and automated microscope systems has made it relatively straightforward for a laboratory to begin running assays and collecting image-based cell assay data, but doing so on a large scale can be more challenging. Challenges include process bottlenecks with sample preparation, image acquisition, and data analysis as well as day-to-day assay consistency, managing unprecedented quantities of image data, and fully extracting useful information from the primary assay data. This chapter considers many of the decisions needed to build a robust infrastructure that addresses these challenges. Infrastructure components described include integrated laboratory automation systems for sample preparation and imaging, as well as an informatics infrastructure for multilevel image and data analysis. Throughout the chapter we describe a variety of strategies that emphasize building processes that are scaleable, highly efficient, and rigorously quality controlled.

Animals↗