Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “ADSORPTION”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 775 records · Page 43Linked to original sources
PubMed2004

Effect of surface grafted polymers on the adsorption of different model proteins.

Adsorption of a model protein to a surface with end-grafted polymers was studied by Monte Carlo simulations. In the model the effect on protein adsorption in the presence of end-grafted polymers was evaluated by calculating the change in free energy between an end-grafted surface and a surface without polymers. The change in free energy was calculated using statistical mechanical perturbation theory. Apart from ordinary athermal polymer-polymer and protein-polymer interactions we also study a broad selection of systems by varying the interaction between proteins and polymers and effective polymer-solvent interactions. The interactions between the molecules span an interval from -0.5 to +0.5 kT. Consequently, general features of protein adsorption to end-grafted surfaces is investigated by systematically changing properties like hydrophilicity/hydrophobicity of the polymer, protein and surface as well as grafting density, degree of polymerization and protein size. Increasing grafting density as well as degree of polymerization decreases the adsorption of protein except in systems with attractive polymer-protein interactions, where adsorption increases with increasing chain length and higher grafting density. At a critical polymer-protein interaction neither chain length nor grafting density affects the free energy of adsorption. Hydrophilic polymers were found to prevent adsorption better than hydrophobic polymers. Very small particles with radii comparable to the size of a polymer segment were, however, better excluded from the surface when using hydrophobic than hydrophilic polymers. For systems with attractive polymer-protein interaction not only the volume of the protein was shown to be of importance but also the size of the exposed surface.

Adsorption↗
PubMed2006

Effect of monascus pigment derivatives on the electrophoretic mobility of bacteria, and the cell adsorption and antibacterial activities of pigments.

Various amino acid derivatives of monascus pigments were synthesized. The effects of pigment derivatives on the pigment adsorption ratio, electrophoretic mobility (EPM) of bacterial cells, and antibacterial activity were investigated under varying conditions of pigment type, pigment concentration, pH, and ionic strength. Two hydrophobic and two hydrophilic derivatives were selected as model pigments. There was a close relationship between the antimicrobial activity and the pigment adsorption ratio. Against Escherichia coli, the hydrophobic L-Tyr and L-Phe derivatives (log P = 3.18 and 3.57) exhibited high antimicrobial activities (MIC = 8 and 16 mg/L) and high cellular adsorption ratios (9.6 and 10.9 mg/L). The hydrophilic L-Glu and L-Asn derivatives (log P = 1.40 and 0.47) exhibited low activities (MIC = 64 and 128 mg/L) and low adsorption ratios (4.7 and 4.0 mg/L). The electrophoretic mobility of 11 different bacteria varied between -1.93 x 10(-8) and -1.19 x 10(-8) m(2) V(-1) s(-1) regardless of Gram(+) or Gram(-). The L-Phe derivative showed low MIC values (high antimicrobial activities) against bacteria with a high electrophoretic mobility. A positive linearity between the pigment adsorption ratio and the electrophoretic mobility was established. When the four pigment derivatives were added to E. coli solutions, the electrophoretic mobility of cells in all cases sharply increased with an increasing pigment concentration. The mobility value was high for hydrophobic pigment derivatives in descending order of L-Phe (0.8 x 10(-8) m(2) V(-1) s(-1)), L-Tyr (0.68 x 10(-8) m(2) V(-1) s(-1)), L-Glu (0.46 x 10(-8) m(2) V(-1) s(-1)), and L-Asn (0.44 x 10(-8) m(2) V(-1) s(-1)). Additional adsorption of the hydrophobic derivatives probably occurred due to a hydrophobic interaction between the pigment and the pigment-coated cells. The electrophoretic mobility decreased gradually with an increasing pH and/or ionic strength with both addition and no addition of the pigment derivatives. The pattern of change of the pigment adsorption ratio under varying pH and/or ionic strength values was similar to the pattern for electrophoretic mobility.

Adsorption↗
PubMed2006

Effects of low-molecular-weight organic ligands and phosphate on DNA adsorption by soil colloids and minerals.

Adsorption of DNA on montmorillonite, kaolinite, goethite and soil clays from an Alfisol in the presence of citrate, tartrate and phosphate was studied. A marked decrease in DNA adsorption was observed on montmorillonite and kaolinite with increasing anion concentrations from 0 to 5 mM. However, the amount of DNA adsorbed by montmorillonite and kaolinite was enhanced when ligand concentration was higher than 5 mM. In the system of soil colloids and goethite, with the increase of anion concentrations, a steady decrease was found and the ability of ligands in depressing DNA adsorption followed the sequence: phosphate > citrate > tartrate. Compared to H2O2-treated clays (inorganic clays), a sharp decrease in DNA adsorption was observed on goethite and organo-mineral complexes (organic clays) with increasing ligand concentrations. The results suggest that the influence of anions on DNA adsorption varies with the type and concentration of anion as well as the surface properties of soil components. Introduction of DNA into the system before the addition of ligands had the greatest amount of DNA adsorption on soil colloids and goethite. Organic and inorganic ligands promoted DNA adsorption on montmorillonite and kaolinite when ligands were introduced into the system before the addition of DNA. The results obtained in this study have important implications for the understanding of the persistence and fate of DNA in soil environments especially rhizosphere soil where various organic and inorganic ligands are active.

Adsorption↗
PubMed2006

Spreading of proteins and its effect on adsorption and desorption kinetics.

The kinetics of adsorption of lysozyme and alpha-lactalbumin from aqueous solution on silica and hydrophobized silica has been studied. The initial rate of adsorption of lysozyme at the hydrophilic surface is comparable with the limiting flux. For lysozyme at the hydrophobic surface and alpha-lactalbumin on both surfaces, the rate of adsorption is lower than the limiting flux, but the adsorption proceeds cooperatively, as manifested by an increase in the adsorption rate after the first protein molecules are adsorbed. At the hydrophilic surface, adsorption saturation (reflected in a steady-state value of the adsorbed amount) of both proteins strongly depends on the rate of adsorption, but for the hydrophobic surface no such dependency is observed. It points to structural relaxation ("spreading") of the adsorbed protein molecules, which occurs at the hydrophobic surface faster than at the hydrophilic one. For lysozyme, desorption has been studied as well. It is found that the desorbable fraction decreases after longer residence time of the protein at the interface.

Adsorption↗
PubMed2006

Kinetics of adsorption of Zn(II) ion on chitosan derivatives.

The adsorption of Zn(II) ions from aqueous solution by chitosan derivatives (KCTS and HKCTS) was studied in a batch adsorption system. The adsorption capacities and rates of Zn(II) ions onto chitosan derivatives were evaluated. The adsorption isothermal data could be well interpreted by the Langmuir and Freundlich models. The kinetic experimental data properly correlated with the second-order kinetic model, which indicates that the chemical adsorption is the rate-limiting step. The apparent adsorption activation energy were 25.47 kJ mol- and 5.473 kJ mol-, respectively, and the second-order adsorption constant for KCTS and HKCTS were 0.00311 g (mg min)(-1) and 0.005 g (mg min)(-1), respectively.

Adsorption↗
PubMed2005

Adsorption kinetics of plasma proteins on solid lipid nanoparticles for drug targeting.

The interactions of intravenously injected carriers with plasma proteins are the determining factor for the in vivo fate of the particles. In this study the adsorption kinetics on solid lipid nanoparticles (SLN) were investigated and compared to the adsorption kinetics on previously analyzed polymeric model particles and O/W-emulsions. The adsorbed proteins were determined using two-dimensional polyacrylamide gel electrophoresis (2-DE). Employing diluted human plasma, a transient adsorption of fibrinogen was observed on the surface of SLN stabilized with the surfactant Tego Care 450, which in plasma of higher concentrations was displaced by apolipoproteins. This was in agreement with the "Vroman-effect" previously determined on solid surfaces. It says that in the early stages of adsorption, more plentiful proteins with low affinity are displaced by less plentiful with higher affinity to the surface. Over a period of time (0.5 min to 4 h) more interesting for the organ distribution of long circulating carriers, no relevant changes in the composition of the adsorption patterns of SLN, surface-modified with poloxamine 908 and poloxamer 407, respectively, were detected. This is in contrast to the chemically similar surface-modified polymeric particles but well in agreement with the surface-modified O/W-emulsions. As there is no competitive displacement of apolipoproteins on these modified SLN, the stable adsorption patterns may be better exploited for drug targeting than particles with an adsorption pattern being very dependent on contact time with plasma.

Adsorption↗
PubMed2004

Adsorption of bovine serum albumin on nanosized magnetic particles.

Adsorption of bovine serum albumin (BSA) on nanosized magnetic particles (Fe(3)O(4)) was carried out in the presence of carbodiimide. The equilibrium and kinetics of the adsorption process were studied. Nanosized magnetic particles (Fe(3)O(4)) were prepared by the chemical precipitation method using Fe2+, Fe3+ salts, and ammonium hydroxide under a nitrogen atmosphere. Characterizations of magnetic particles were carried out using transmission electron microscopy (TEM) and a vibrating sample magnetometer (VSM). Fourier-transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) were used to confirm the attachment of BSA on magnetic particles. Effects of pH and salt concentrations were investigated on the adsorption process. The experimental results show that the adsorption of BSA on magnetic particles was affected greatly by the pH, while the effect of salt concentrations was insignificant at a low concentration range. The adsorption equilibrium isotherm was fitted well by the Langmuir model. The maximum adsorption of BSA on magnetic particles occurred at the isoelectric point of BSA. Adsorption kinetics was analyzed by a linear driving force mass-transfer model. BSA was desorbed from magnetic particles under alkaline conditions, which was confirmed by SDS-PAGE electrophoresis and FTIR results.

Adsorption↗
PubMed2004

Kinetics and equilibrium adsorption study of lead(II) onto activated carbon prepared from coconut shell.

Removal of lead from aqueous solutions by adsorption onto coconut-shell carbon was investigated. Batch adsorption experiments were performed to find out the effective lead removal at different metal ion concentrations. Adsorption of Pb2+ ion was strongly affected by pH. The coconut-shell carbon (CSC) exhibited the highest lead adsorption capacity at pH 4.5. Isotherms for the adsorption of lead on CSC were developed and the equilibrium data fitted well to the Langmuir, Freundlich, and Tempkin isotherm models. At pH 4.5, the maximum lead adsorption capacity of CSC estimated with the Langmuir model was 26.50 mg g(-1) adsorbent. Energy of activation (Ea) and thermodynamic parameters such as DeltaG, DeltaH, and DeltaS were evaluated by applying the Arrhenius and van't Hoff equations. The thermodynamics of Pb(II) on CSC indicates the spontaneous and endothermic nature of adsorption. Quantitative desorption of Pb(II) from CSC was found to be 75% which facilitates the sorption of metal by ion exchange.

Adsorption↗
PubMed2005

The impact of ionic strength on the adsorption of protons, Pb, Cd, and Sr onto the surfaces of Gram negative bacteria: testing non-electrostatic, diffuse, and triple-layer models.

Bacterial surface adsorption reactions are influenced by electric field effects caused by changes in ionic strength; however, existing datasets are too sparse to definitively constrain these differences or to determine the best way to account for them using thermodynamic models. In this study, we examine the ionic strength dependence of proton and metal adsorption onto the surfaces of Pseudomonas mendocina and Pseudomonas putida by conducting proton, Cd(II), Pb(II), and Sr(II) adsorption experiments over the ionic strength range of 0.001 to 0.6 M. Chosen experimental results are thermodynamically modeled using a non-electrostatic approach, a diffuse layer model (DLM), and a triple-layer model (TLM). The results demonstrate that bacterial surface electric field effects are negligible for proton, Cd, and Pb adsorption onto P. putida and P. mendocina, and that the discrete site non-electrostatic model developed in this study is adequate for describing these reactions. The extent of Sr adsorption is influenced by changes in the bacterial surface electric field; however, the non-electrostatic model better describes Sr adsorption behavior than the DLM or TLM. The DLM and TLM greatly overpredict the effect of the electric field for all adsorption reactions at all ionic strengths tested.

Adsorption↗
PubMed2005

Assessment of the surface areas of silica and clay in acid-leached clay materials using concepts of adsorption on heterogeneous surfaces.

Two clays of the areas of Kaélé and Kousseri (extreme North Cameroon) containing mainly smectites and minor amounts of kaolinite were activated with sulfuric acid (1 to 8 N). Crystal-chemical properties were studied using X-ray diffraction, Fourier transform infrared spectroscopy, and chemical analysis, while textural properties were analyzed by step-by-step nitrogen adsorption at 77 K and low-pressure quasi-equilibrium argon adsorption at 77 K. As is generally observed, smectite is more sensitive to acid leaching than kaolinite. As a result of smectite decomposition, amorphous Al-containing silica forms, leading to an increase in the specific surface area of the leached materials. The content of the clay minerals and amorphous silica can be estimated on the basis of changes in the chemical composition of the samples upon acid leaching. As far as adsorption energy distributions derived from low-pressure argon derivative adsorption isotherms are concerned, the main modifications occur when 1 N sulfuric acid is used, due to the replacement of calcium and sodium compensating cations by protons. When higher acid concentrations are used, variations in adsorption energy distribution can be assigned to the presence of amorphous silica. It was possible to model experimental adsorption energy distributions as weighted sums of argon adsorption energy distributions obtained on (i) 1 N samples representing protonated clays and (ii) a silica gel used as a reference aluminous silica. Using such an approach, increasing acid concentration results in an increase in the surface area of silica, whereas the surface area of the remaining clay minerals remains roughly constant.

Adsorption↗
PubMed2006

In situ sensing of metal ion adsorption to a thiolated surface using surface plasmon resonance spectroscopy.

The kinetics of the adsorption of metal ions onto a thiolated surface and the selective and quantitative sensing of metal ions were explored using surface plasmon resonance (SPR) spectroscopy. The target metal ion was an aqueous solution of Pt2+ and a thin-gold-film-coated glass substrate was modified with 1,6-hexanedithiol (HDT) as a selective sensing layer. SPR spectroscopy was used to examine the kinetics of metal ion adsorption by means of the change in SPR angle. The selectivity of the thiolated surface for Pt2+ over other divalent metal ions such as Cu2+, Ni2+, and Cd2+ was evident by the time-resolved SPR measurement. SPR angle shift, deltatheta(SPR), was found to increase logarithmically with increasing concentration of Pt2+ in the range of 1.0 x 10(-5)-1.0 mM. The rate of Pt2+ adsorption on HDT observed at both 0.1 and 1 mM Pt2+ accelerates until the surface coverage reaches approximately 17%, after which the adsorption profile follows Langmuirian behavior with the surface coverage. The experimental data indicated that heavy metal ions were adsorbed to the hydrophobic thiolated surface by a cooperative mechanism. A mixed self-assembled monolayer (SAM) composed of HDT and 11-mercaptoundecanoic acid was used to reduce the hydrophobicity of the thiol-functionalized surface. The addition of hydrophilic groups to the surface enhanced the rate of adsorption of Pt2+ onto the surface. The findings show that the adsorption of metal ions is strongly dependent upon the hydrophilicity/hydrophobicity of the surface and that the technique represents an easy method for analyzing the adsorption of metal ions to a functionalized surface by combining SPR spectroscopy with a SAM modification.

Adsorption↗
PubMed2006

Using the dual-mode model to describe adsorption of organic pollutants onto an organoclay.

Adsorption of 2,4,5-trichlorophenol (TCP) and picric acid (PA) by montmorillonite preloaded with crystal violet (CV) up to 80, 100, and 125% of the cation exchange capacity was studied. The adsorption isotherms indicated a strong interaction of TCP and PA with the organoclay. While the adsorption isotherms of both pollutants can be described by the Langmuir model with relatively good fit, the adsorption of TCP is more adequately described by the dual-mode model (DMM), which combines the Langmuir equation with a partition mechanism. Competitive adsorption experiments and adsorption experiments in water:ethanol mixed medium as a solvent confirmed the assumption that the removal of TCP from water by the organoclay follows two different mechanisms: site-specific adsorption occurs in the low concentration range, whereas a partition mechanism dominates the high concentration range. This double mechanism in organoclays exhibits both complete removal at low pollutant concentrations and high sorption capacity in the high concentration range, and therefore may be effective in water treatment for a wide range of pollution levels.

Adsorption↗
PubMed2006

Adsorption characteristics of bisphenol-A in aqueous solutions onto hydrophobic zeolite.

The adsorption behavior of bisphenol-A, which is a hydrophobic organic compound and also listed as one of endocrine disrupting chemicals, from aqueous solution onto hydrophobic zeolite at 25 degrees C have been studied using a batch adsorption process in terms of a pseudo-second-order equation and three common isotherms (i.e., the Langmuir, Freundlich, and Redlich-Peterson). The pore properties of the Y-type zeolite have been determined using N2 adsorption-desorption isotherms, indicating that it is a supermicroporous adsorbent associated with a lower percentage of mesopores. Based on the kinetic model the effects of particle size, initial bisphenol-A concentration, initial solution pH, and adsorbent dosage on the adsorption rate constant and equilibrium capacity have been estimated, showing that the adsorption process could be simulated well by the simplified kinetic model. From the data on the equilibrium adsorption capacities obtained by fitting the pseudo-second-order model, the adsorption isotherm could be better described by the three-parameter Redlich-Peterson model than by the two-parameter models (i.e., the Langmuir and Freundlich).

Adsorption↗
PubMed2006

Chitosan-N-poly(ethylene oxide) brush polymers for reduced nonspecific protein adsorption.

The possibility of using a novel comb polymer consisting of a chitosan backbone with grafted 44 units long poly(ethylene oxide) side chains for reducing nonspecific protein adsorption to gold surfaces functionalized by COOH-terminated thiols has been explored. The comb polymer was attached to the surface in three different ways: by solution adsorption, covalent coupling, and microcontact printing. The protein repellent properties were tested by monitoring the adsorption of bovine serum albumin and fibrinogen employing surface plasmon resonance and imaging null ellipsometry. It was found that a significant reduction in protein adsorption is achieved as the comb polymer layer is sufficiently dense. For solution adsorption this was achieved by adsorption from high pH solutions. On the other hand, the best performance of the microcontact printed surfaces was obtained when the stamp was inked either at low or at high pH. For a given comb polymer layer thickness/poly(ethylene oxide) density, significant differences in protein repellent properties were observed between the different preparation methods, and it is suggested that a reduction in the mobility of the comb polymer layer generated by covalent attachment favors a reduced protein adsorption.

Adsorption↗
PubMed2007

Studies on selenite adsorption using manganese nodule leached residues.

Selenite adsorption on water-washed manganese nodule leached residues (WMNLR) was studied with the aim of detoxifying industrial effluents before their safe disposal into the environment. WMNLR, a solid waste material, was characterized with the help of XRD, FTIR, TG-DTA, pH(pzc), BET surface area, surface oxygen, surface hydroxyl group, and chemical analyses. The adsorption behavior of WMNLR toward selenite was studied as a function of time, pH, temperature, and concentration of adsorbate and adsorbent. Increased adsorption capacity with rise in temperature indicates that the adsorption process was endothermic in nature. Based on the thermodynamic parameters such as the Gibbs free energy change, standard enthalpy change, and standard entropy change, the adsorption process was found to be spontaneous and endothermic in nature. Adsorption followed second-order kinetics. The adsorption capacity of the material was found to be 54.6 mg g(-1) at 60 mg L(-1) of selenite concentration at pH 5 in 3 h contact time.

Adsorption↗
PubMed2006

Utilization of powdered waste sludge (PWS) for removal of textile dyestuffs from wastewater by adsorption.

Acid pre-treated powdered waste sludge (PWS) was used for removal of textile dyestuffs from aqueous medium by adsorption as an alternative to the use of powdered activated carbon (PAC). The rate and extent of dysetuff removals were determined for four different dyestuffs at different PWS concentrations varying between 1 and 6 gl(-1). Biosorbed dyestuff concentrations at equilibrium decreased with increasing PWS concentration for all dyestuffs tested. PWS was more effective for adsorption of Remazol red RR and Chrisofonia direct yellow 12 as compared to the other dyestuffs tested. More than 80% percent dyestuff removal was obtained for all dyestuffs at PWS concentrations above 4 gl(-1) after 6h of incubation. Similar to percent dyestuff removal, the rate of adsorption was maximum at a PWS concentration of 4 gl(-1). Kinetics of adsorption of dyestuffs was investigated by using the first- and second-order kinetic models and the kinetic constants were determined. Second-order kinetics was found to fit the experimental data better than the first-order model for all dyestuffs tested. Adsorption isotherms were established for all dyestuffs used and the isotherm constants were determined by using the experimental data. Langmuir and the generalized adsorption isotherms were found to be more suitable than the Freundlich isotherm for correlation of equilibrium adsorption data. Acid pre-treated PWS was proven to be an effective adsorbent for dyestuff removal as compared to the other adsorbents reported in literature studies.

Adsorption↗
PubMed2005

Adsorption of phthalic acid and its esters onto high-area activated carbon-cloth studied by in situ UV-spectroscopy.

The adsorption behavior of phthalic acid and its three esters dimethyl phthalate, diethyl phthalate and diallyl phthalate onto high-area activated carbon-cloth was studied by in situ UV-spectroscopic technique. The effect of ionization of phthalic acid on its adsorption was examined by carrying out the adsorption process in three media; water, 1 M H(2)SO(4) and 0.005 M NaOH. Maximum adsorption was observed in 1 M H(2)SO(4) and almost no adsorption in 0.005 M NaOH. These results were discussed in terms of electrostatic and dispersion interactions between the adsorbate species and the carbon-cloth surface taking the point of zero charge (pH(pzc)) of the carbon-cloth into account. The adsorption process for the phthalate species studied was found to follow the first-order rate law, and the rate constants were determined. The isotherm data for the adsorption of phthalic acid and its esters were derived experimentally and fitted to Langmuir and Freundlich isotherm equations. Both equations were found to represent the experimental isotherm data almost equally well.

Adsorption↗
PubMed2005

Adsorption behaviors of some phenolic compounds onto high specific area activated carbon cloth.

Adsorption of phenol, hydroquinone, m-cresol, p-cresol and p-nitrophenol from aqueous solutions onto high specific area activated carbon cloth has been studied. The effect of ionization on adsorption of these ionizable phenolic compounds was examined by studying the adsorption from acidic, basic and natural pH solutions. Kinetics of adsorption was followed by in situ UV spectroscopy over a period of 90 min. First-order rate law was found to be valid for the kinetics of adsorption processes and the rate constants were determined. The highest rate constants were obtained for the adsorption from solutions at the natural pH. The lowest rate constants were observed in basic solutions. The rate constants decreased in the order p-nitrophenol approximately m-cresol>p-cresol>hydroquinone approximately phenol. Adsorption isotherms were derived at 30 degrees C and the isotherm data were treated according to Langmuir, Freundlich and Tempkin isotherm equations. The goodness of fit of experimental data to these isotherm equations was tested and the parameters of equations were determined. The possible interactions of compounds with the carbon surface were discussed considering the charge of the surface and the possible ionization of compounds at acidic, basic and natural pH conditions.

Adsorption↗