Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Thermal Diffusion”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42Linked to original sources
PubMed1999

Thermophysical effects of ointments in cold: an experimental study with a skin model.

The use of emollients on the face is a traditional way to protect the skin against cold injuries in cold climate countries like Finland, but their preventive effect against frostbite has been questioned. The purpose of this investigation was to define the thermal insulation and occlusivity of ointments in cold by using a skin model with a sweating hot plate. The properties of four different emollients were studied in both dry and humid conditions simulating transepidermal water loss, sweating, and a combination of sweating and drying. The thermal insulation of ointments applied on a dry surface was minimal. Evaporation of water from an oil-in-water cream caused significant cooling for 40 min after its application. The diffusion of water through the applied emollients changed their thermal effects depending on their composition and on the amount of water. Low input of water increased and high input diminished slightly the thermal resistance of ointments. The minimal or even negative thermal insulation of emollients in varying conditions gives them at best only a negligible and at worst a disadvantageous physical effect against cold.

Cold Temperature↗
PubMed2002

Production of galacto-oligosaccharides from lactose by Aspergillus oryzae beta-galactosidase immobilized on cotton cloth.

The production of galacto-oligosaccharides (GOS) from lactose by A. oryzae beta-galactosidase immobilized on cotton cloth was studied. The total amounts and types of GOS produced were mainly affected by the initial lactose concentration in the reaction media. In general, more and larger GOS can be produced with higher initial lactose concentrations. A maximum GOS production of 27% (w/w) of initial lactose was achieved at 50% lactose conversion with 500 g/L of initial lactose concentration. Tri-saccharides were the major types of GOS formed, accounting for more than 70% of the total GOS produced in the reactions. Temperature and pH affected the reaction rate, but did not result in any changes in GOS formation. The presence of galactose and glucose at the concentrations encountered near maximum GOS greatly inhibited the reactions and reduced GOS yield by as much as 15%. The cotton cloth as the support matrix for enzyme immobilization did not affect the GOS formation characteristics of the enzyme, suggesting no diffusion limitation in the enzyme carrier. The thermal stability of the enzyme increased approximately 25-fold upon immobilization on cotton cloth. The half-life for the immobilized enzyme on cotton cloth was more than 1 year at 40 degrees C and 48 days at 50 degrees C. Stable, continuous operation in a plugflow reactor was demonstrated for 2 weeks without any apparent problem. A maximum GOS production of 21 and 26% (w/w) of total sugars was attained with a feed solution containing 200 and 400 g/L of lactose, respectively, at pH 4.5 and 40 degrees C. The corresponding reactor productivities were 80 and 106 g/L/h, respectively, which are at least several-fold higher than those previously reported.

Aspergillus oryzae↗
PubMed2005

Intradermally focused infrared laser pulses: thermal effects at defined tissue depths.

BACKGROUND AND OBJECTIVES: To produce controlled, spatially confined thermal effects in dermis. STUDY DESIGNS/MATERIALS AND METHODS: A 1 W, 1,500 nm fiber-coupled diode laser was focused with a high numerical aperture (NA) objective to achieve a tight optical focus within the upper dermis of skin held in contact with a glass window. The delivery optics was moved using a computer-controlled translator to generate an array of individual exposure spots. Fresh human facial skin samples were exposed to a range of pulse energies at specific focal depths, and to a range of focal depths at constant pulse energy. Cellular damage was evaluated in frozen sections using nitro-blue tetrazolium chloride (NBTC), a lactate dehydrogenase (LDH) activity stain. Loss of birefringence due to thermal denaturation of collagen was evaluated using cross-polarized light microscopy. The extent of focal thermal injury was compared with a model for photon migration (Monte Carlo Simulation), heat diffusion, and protein denaturation (Arrhenius model). RESULTS: Arrays of confined, microscopic intradermal foci of thermal injury were created. At high NA, epidermal damage was avoided without active cooling. Foci of thermal injury were typically 50-150 microm in diameter, elliptical, and at controllable depths from 0 to 550 microm. Both LDH inactivation and extracellular matrix denaturation were achieved. CONCLUSION: Spatially confined foci of thermal effects can be achieved by focusing a low-power infrared laser into skin. Size, depth, and density of microscopic, thermal damage foci may be arbitrarily controlled while sparing surrounding tissue. This may offer a new approach for nonablative laser therapy of dermal disorders.

Burns↗
PubMed2005

Extraction of cashew (Anacardium occidentale) nut shell liquid using supercritical carbon dioxide.

This work investigated the extraction of cashew nut shell liquid (CNSL) using supercritical carbon dioxide (SC-CO(2)). Effects of process parameters such as extraction pressure, temperature and flow rate of SC-CO(2) were investigated. The yield of CNSL increased with increase in pressure, temperature and mass flow rate of SC-CO(2). However, under different operating conditions, the composition of CNSL varied. The study of physical properties and chemical composition of the oil obtained through super critical fluid extraction (SCFE) showed better quality as compared to the CNSL obtained through thermal route. Experimental results were compared with diffusion based mass transfer model. Based on this simple model, extraction time was optimized.

Anacardium↗
PubMed2004

Paclitaxel loaded poly(L-lactic acid) (PLLA) microspheres. II. The effect of processing parameters on microsphere morphology and drug release kinetics.

The kinetics of solvent removal in microsphere preparation and their effect on the morphology and release characteristics of paclitaxel-loaded PLLA microspheres were determined. Microspheres were analyzed by SEM and DSC and in vitro paclitaxel release was monitored by HPLC. During manufacture, dichloromethane evaporated at a constant rate, which increased with dispersion stirring speed and decreased with increasing paclitaxel content. Paclitaxel-loaded microspheres had a dimpled surface, due to surface deposition of the drug, while controls were smooth. In the formation of larger microspheres, the deposition of drug in the surface slowed the solidification process resulting in drug-loading dependent thermal properties. Paclitaxel release did not follow diffusion kinetics, rather it was characterized by a large burst followed by a linear phase. We speculate that non-uniform (surface-rich) drug distribution in the microspheres may contribute to the deviation from the theoretical pattern of kinetics for diffusion from a sphere.

Calorimetry, Differential Scanning↗
PubMed2006

Properties of porcine and recombinant human collagen matrices for optically clear tissue engineering applications.

Porcine and recombinant human atelocollagen I solutions were cross-linked with a water soluble carbodiimide at various stoichiometries and collagen concentrations (5-20 w/w %). The resulting hydrogels were clear and, when used as cell growth matrices, allowed cell and nerve visualization in vitro and in vivo. We have previously reported that, after six months of implantation in pigs' and rabbits' corneas, these robust hydrogels allowed regeneration of host cells and nerves to give optically clear corneas with no detected loss in thickness, indicating stable engraftment. Here, the biocompatible hydrogel formulations leading to this novel in vivo performance were characterized for amine consumption, gel hydration, thermal properties, optical clarity, refractive index, nutrient diffusion, biodegradation, tensile measurements, and average pore diameters. Gels with excellent in vitro (epithelial overgrowth, neurite penetration) and in vivo performance (clarity, touch sensitivity regeneration) had 4-11 nm pores, yet had glucose and albumin diffusive coefficients similar to mammalian corneas and allowed neurite extension through the gels.

Amines↗
PubMed2005

On the lamellar compounds CuBiP(2)Se(6), AgBiP(2)Se(6) and AgBiP(2)S(6). Antiferroelectric phase transitions due to cooperative Cu(+) and Bi(3+) ion motion.

CuBiP(2)Se(6), AgBiP(2)Se(6), and AgBiP(2)S(6) were prepared from the corresponding elements. CuBiP(2)Se(6) and AgBiP(2)Se(6) crystallize in the space group R with a = 6.5532(16) A and c = 39.762(13) A for CuBiP(2)Se(6) and a = 6.6524(13) A and c = 39.615(15) A for AgBiP(2)Se(6). AgBiP(2)S(6) crystallizes in the triclinic space group P with a = 6.3833(13) A, b = 7.1439(14) A, c = 9.5366(19) A, alpha = 91.89(3) degrees , beta = 91.45(3) degrees , gamma = 94.05(3) degrees . CuBiP(2)Se(6) was found to exhibit a temperature-dependent antiferroelectric ordering of the Cu(+) and Bi(3+) ions in the lattice. An intermediate and a fully ordered structure were refined at 173 and 97 K, respectively. Electronic band and total energy calculations at the DFT level clearly suggest that the antiferroelectric model is energetically favored over the paraelectric and hypothetical ferrielectric models. This phase transition can be classified as a second-order Jahn-Teller distortion. The antiferroelectric state of CuBiP(2)Se(6) is an indirect gap semiconductor. The compounds were characterized with differential thermal analysis and solid-state UV/vis diffuse reflectance spectroscopy. Generalized implications regarding the expected ferroelectric behavior of compounds in the CuMP(2)Se(6) system (M = trivalent metal) are discussed.

Bismuth↗
PubMed2005

Structure and bonding issues at the interface between gold and self-assembled conjugated dithiol monolayers.

Organic thiols have received extensive attention recently because of their relative stability and ease of examination compared to other potential molecular electronic materials. In this work, scanning probe microscopy (SPM) is used to study (i) the structural properties of self-assembled monolayers (SAMs) containing conjugated dithiols and (ii) the formation of the upper molecule-metal interface on dithiol SAMs. The top gold film is deposited either by thermal evaporation or by nano-transfer printing (nTP). Generally, the utility of thermal evaporation is limited because of Au diffusion through the SAMs. However, several dithiol SAMs are identified in this work that bond well to Au overlayers and act as satisfactory diffusion barriers. Coassembly of conjugated dithiols and alkanemonothiols is suggested as a route to obtain dithiols that are denser packed and more vertical (than is obtained from pure dithiol routes). High-yield nTP is demonstrated on coassembled SAMs. Advantages and limitations of different Au deposition and transfer techniques are compared on a variety of length scales.

Gold↗
PubMed2005

Collision statistics, thermodynamics, and transport coefficients of hard hyperspheres in three, four, and five dimensions.

The collision statistics of hard hyperspheres are investigated. An exact, analytical formula is developed for the distribution of speeds of a sphere on collision, which is shown to be related to the average time between collisions for a sphere with a particular velocity. In addition, the relationship between the collision rate and the compressibility factor is generalized to arbitrary dimensions. Molecular dynamics simulations are performed for d=3, 4, and 5 dimensional hard-hypersphere fluids. From these simulations, the equation of state of these systems, the self-diffusion coefficient, the shear viscosity, and the thermal conductivity are determined as a function of density. Various aspects of the collision statistics and their dependence on the density and dimensionality of the system are also studied.

Journal Article↗
PubMed1997

Possible deficiencies of pain modulation in fibromyalgia.

OBJECTIVE: To examine possible deficiencies in endogenous pain modulating mechanisms in fibromyalgia patients compared with matched pain-free control subjects. DESIGN/SUBJECTS/METHODOLOGY: Pain reduction was investigated in 25 female patients with fibromyalgia and 26 age-matched healthy women using the diffuse noxious inhibitory controls (DNIC) paradigm. Tonic thermal stimuli at painful and nonpainful intensities, tailored to individual heat pain thresholds, were employed to induce pain inhibition. The anticipated effect was assessed by measuring the electrical pain threshold and detection threshold, using a double staircase method. Only nontender control points were stimulated (thermode on the foot, electrodes on the inner forearm). RESULTS: The patients with fibromyalgia had significantly lower heat pain thresholds than the healthy subjects, but similar electrical detection and pain thresholds. The repeatedly applied electrical stimuli resulted in a degree of perceptual adaptation that was similar between the two groups. However, concurrent tonic thermal stimuli, at both painful and nonpainful levels, significantly increased the electrical pain threshold in the healthy subjects but not in the fibromyalgia patients. The electrical detection threshold was not affected in either group. CONCLUSIONS: Pain modulation, produced by a concurrent tonic stimulus in healthy persons, was not seen in the fibromyalgia group. The patients either had deficient pain modulation or were unable to tolerate a tonic stimulus intense enough to engage a modulatory process. It remains to be established whether the pain reduction found in the healthy subjects was the conventional DNIC effect, another effect (e.g., distraction), or a combination of both.

Adaptation, Psychological↗
PubMed2006

Capillary wave fluctuations and intrinsic widths of coupled fluid-fluid interfaces: an x-ray scattering study of a wetting film on bulk liquid.

An x-ray specular reflectivity (XR) and off-specular diffuse scattering (XDS) study of the coupled thermal capillary fluctuations and the intrinsic profiles of two interacting fluid-fluid interfaces is presented. The measurements are carried out on complete wetting films of perfluoromethylcyclohexane (PFMC) on the surface of bulk liquid eicosane (C20), as a function of film thickness 30 infinity), determined by either the radius of gyration (5.3 A) or the bulk correlation length (4.8 A) of the alkane C20. The intrinsic liquid-vapor interfacial width is sharper (approximately 2 A) and remains essentially constant over the entire probed range of D .

Journal Article↗
PubMed2001

Repeating deep earthquakes: evidence for fault reactivation at great depth.

We have identified three groups of deep earthquakes showing nearly identical waveforms in the Tonga slab. Relocation with a cross-correlation method shows that each cluster is composed of 10 to 30 earthquakes along a plane 10 to 30 kilometers in length. Some of the earthquakes are colocated, demonstrating repeated rupture of the same fault, and one pair of events shows identical rupture complexity, suggesting that the temporal and spatial rupture pattern was repeated. Recurrence intervals show an inverse time distribution, indicating a strong temporal control over fault reactivation. Runaway thermal shear instabilities may explain temporally clustered earthquakes with similar waveforms located along slip zones weakened by shear heating. Earthquake doublets that occur within a few hours are consistent with events recurring before the thermal energy of the initial rupture can diffuse away.

Journal Article↗
PubMed2006

Systematic effects induced by a flat isotropic dielectric slab.

The instrumental polarization induced by a flat isotropic dielectric slab in microwave frequencies is discussed. We find that, in spite of its isotropic nature, such a dielectric can produce spurious polarization either by transmitting incoming anisotropic diffuse radiation or emitting when it is thermally inhomogeneous. We present evaluations of instrumental polarization generated by materials usually adopted in radio astronomy, by using the Mueller matrix formalism. As an application, results for different slabs in front of a 32 GHz receiver are discussed. Such results are based on measurements of their complex dielectric constants. We evaluate that a 0.33 cm thick Teflon slab introduces negligible spurious polarization (<2.6 x 10(-5) in transmission and <6 x 10(-7) in emission), even minimizing the leakage (<10(-8) from Q to U Stokes parameters, and vice versa) and the depolarization (approximately 1.3 x 10(-3)).

Journal Article↗
PubMed2001

Theoretical, experimental, and computational aspects of optical property determination of turbid media by using frequency-domain laser infrared photothermal radiometry.

In this work, the optical and thermal properties of tissuelike materials are measured by using frequency-domain infrared photothermal radiometry. This technique is better suited for quantitative multiparameter optical measurements than the widely used pulsed-laser photothermal radiometry (PPTR) because of the availability of two independent signal channels, amplitude and phase, and the superior signal-to-noise ratio provided by synchronous lock-in detection. A rigorous three-dimensional (3-D) thermal-wave formulation with a 3-D diffuse and coherent photon-density-wave source is applied to data from model phantoms. The combined theoretical, experimental, and computational methodology shows good promise with regard to its analytical ability to measure optical properties of turbid media uniquely, as compared with PPTR, which exhibits uniqueness problems. From data sets obtained by using calibrated test phantoms, the reduced optical scattering and absorption coefficients were found to be within 20% and 10%, respectively, of the values independently derived by using Mie theory and spectrophotometric measurements.

Journal Article↗
PubMed2005

[Preparation and evaluation of 3,5-dinitrobenzoyl-bonded silica gel stationary phase for high performance liquid chromatography].

A new preparation method of 3,5-dinitrobenzoyl-bonded silica gel stationary phase (DNB) for high performance liquid chromatography has been developed by using N-(beta-aminoethyl)-gamma-aminopropyl-methyldimethoxy silane as coupling reagent. Its structure was characterized by elemental analysis, diffuse reflectance Fourier transform infrared spectroscopy and thermal analysis. The surface concentration of 3,5-dinitrobenzoyl ligand was 2.08 micromol/m2 according to the carbon content from elemental analysis. The chromatographic performance of the new packing was evaluated by using different solute probes, such as polycyclic aromatic hydrocarbons (PAHs), phenols, naphthalene derivatives, nitrophenol positional isomers and sulfonamides. The results show that comparing with ODS, DNB has weaker hydrophobicity and more versatile chromatographic properties. The charge-transfer between the dinitrobenzoyl ligand and the analytes plays a significant role in the separation of phenols and naphthalene derivatives. In addition, static electric, hydrogen-bonding and dipole-dipole interactions are responsible for the above separations and improve the selectivity of DNB for solutes. An advantage of DNB is that it is suitable for the separation of the basic compounds containing nitrogen atoms without capped process because the spacer containing nitrogen atoms can shield the residual silanols on DNB.

Chromatography, High Pressure Liquid↗
PubMed2004

A new mathematical approach to the diffusion approximation theory for selective photothermolysis modeling and its implication in laser treatment of port-wine stains.

BACKGROUND AND OBJECTIVES: Monte Carlo (MC) simulations of light-tissue interactions and analytical solutions for the diffusion approximation theory have been used to determine the optimal laser wavelength and radiant exposure to treat port-wine stains (PWS). Both approaches suggest that optimal parameters are a wavelength of 585 or 595-nm with pulse times of 0.45-20 milliseconds. However, which parameters are optimal is still unclear. As differences in vessel size and in temperature distribution within vessels appeared to be the main reasons for the varied responses to the same laser treatments, we sought to develop a solution to the diffusion approximation in order to calculate temperature distribution and the resulting coagulation pattern within specific blood vessels. STUDY DESIGN/MATERIALS AND METHODS: The light and heat diffusion equations were simultaneously solved with the finite element method (FEM). The latent heat of evaporation was included in the thermal analysis. The temperature and coagulation patterns across specific blood vessels, within a heterogeneous medium, were calculated for laser wavelengths of 585 and 595-nm with clinical parameters. RESULTS: At 1.2 mm deep, the calculations predicted that vessels ranging from 50 to 100 microm in diameter would be coagulated from top to bottom, small vessels (10 microm) would be spared, and vessels larger than 150 microm would be partially coagulated. Coagulation across vessels was more uniform for the 595-nm than for the 585-nm wavelength. Maximal temperatures did not exceed 100 degrees C because of the inclusion of latent heat in the thermal calculations. CONCLUSIONS: To study laser treatments of PWS with the diffusion approximation, FEM is an effective method to calculate the coagulation patterns within specific blood vessels. To improve coagulation efficacy at 585 and 595-nm wavelengths, the radiant exposure should be increased without increasing the irradiance.

Body Temperature↗
PubMed2006

NMR angle-dependent spectral study of core dynamics in a discotic columnar phase.

A detailed (2)H NMR study of a discotic monomer is reported in its columnar phase at 61.4 MHz. A simulation of angular-dependent spectral patterns and/or signal intensities of the aromatic deuterons is shown to provide information on the small step (or jump) diffusion rates in the low temperature region of the D(ho) phase, where the motion is in the intermediate motion regime. In the high end of this phase, the motion falls into the fast motion regime and spectral patterns become insensitive to the diffusion rate. In such a case, angular-dependent NMR signal intensities were used to give the required dynamic information. The diffusive motion about the columnar axis is found to be thermally activated with an activation energy of 69 kJ/mol. Deuteron spin-lattice relaxation rates were measured at 61.4 MHz and interpreted by a conventional rotational diffusion model in order to complement and compare with the above study when possible.

Journal Article↗
PubMed2001

Ion heating by fast-particle-induced Alfvén turbulence.

A novel mechanism that directly transfers energy from super-Alfvénic energetic ions to thermal ions in high- beta plasmas is described. The mechanism involves the excitation of compressional Alfvén eigenmodes in the frequency range with omega less than approximetely omega(ci). The broadband turbulence resulting from the large number of excited modes causes stochastic diffusion in velocity space, which transfers wave energy to thermal ions. This effect may be important on National Spherical Torus Experiment [M. Ono et al., Nucl. Fusion 40, 557 (2000)] and may scale up to reactor scenarios. This has important implications for low-aspect-ratio reactor concepts, since it potentially allows for increased fusion reactivity in such a device.

Journal Article↗