Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Prosthesis Fitting”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 757 records · Page 42Linked to original sources
PubMedDate not supplied

Effects of release time and directionality on unilateral and bilateral hearing aid fittings in complex sound fields.

In studies to date, the effectiveness of the directional microphone has been investigated independently of the signal processing scheme used in the hearing aid. In addition, the number and placement of the background noise speakers can create an advantage for a particular polar pattern (i.e., cardioid, supercardioid, and hypercardioid) in any laboratory design. With these considerations in mind, the purpose of this investigation was twofold: (1) to determine the effect of different amplitude-compression release times on speech perception ability in noise, measured with directional microphone hearing aids, and (2) to determine the impact of environment (classroom vs anechoic chamber) on those measures. Ten subjects with mild to moderate sensorineural hearing loss participated. Using an eight-speaker complex sound field, speech perception was assessed in an anechoic chamber and a typical classroom environment. None of the release times resulted in superior performance in either the anechoic or classroom environment.

Acoustic Stimulation↗
PubMed2004

New aspects and approaches in pre-operative planning of hip reconstruction: a computer simulation.

BACKGROUND: All computer-aided surgery technologies assume that the surgeon knows the best position for the implant components. However, there is indirect evidence that simple anatomical information may not be sufficient for the surgeon to decide size and position of the implant in a repeatable manner. METHOD: In the present study we estimated the variability in choosing the size and position of the components of a cementless total hip replacement (THR), using template-on-radiograph as well as computed tomography (CT)-based computer-aided planning. In addition, using a computer model, we assessed the sensitivity to such variability of implant fitting, location of the joint centre, skeletal range of motion, and resting length of major hip muscles. Using templates, surgeons selected the size with variability up to 2.5 mm for the stem and up to 4 mm for the socket. A similar variability was also observed when the CT-based planning program was used. RESULTS: No major differences were found between surgeons. The standard deviation over repeated planning sessions of the selected position for each component, using the CT-based planning software, was found to be 3.9 mm and 8.9 degrees . CONCLUSION: On the basis of the computer simulation, this variability did not affect the selected biomechanical parameters in a drastic way, although some differences were observed, especially in the lever arm of the hip muscles.

Arthroplasty, Replacement, Hip↗
PubMed2004

Use of silicone hydrogel contact lenses by Australian optometrists.

BACKGROUND: Prior to the launch of silicone hydrogel (Si-H) materials in Australia in 1999, only 1.6 per cent of lenses were prescribed on a continuous wear basis. METHODS: One thousand surveys were distributed randomly to practitioners in Australia during January 2000, 2001 and 2002 (total surveys 3000). Each anonymous survey requested data about the next 10 patients fitted with contact lenses, including date, age, gender, new fitting or refitting, lens material type, lens design, frequency of replacement, modality of wear, uses per week and care regimen. RESULTS: Twenty per cent (599) were returned, reporting data on 5976 fittings. A total of 710 fittings used Si-H contact lenses (11.9 per cent), which represented 18.6 per cent of all soft lens fittings. During the three years, the proportion of practitioners prescribing Si-H lenses increased from 42.2 to 52.5 per cent. In 2000, 43.8 per cent were daily wear, which decreased to 32.2 per cent by 2002. The solution system of choice for daily wear lenses was multipurpose solutions (98.4 per cent); the only alternative was hydrogen peroxide systems. Continuous wear represented 11.7 per cent of all fittings, of which 85.7 per cent were Si-H, 3.0 per cent RGP lenses and 11.3 per cent conventional hydrogels. For continuous wear, 79.0 per cent of fittings were to existing wearers, whereas for daily wear, 59.4 per cent were existing wearers. More males were prescribed Si-H continuous wear contact lenses, while females were more likely to be prescribed Si-H on a daily wear basis. DISCUSSION: Si-H contact lenses were introduced to the Australian market as a continuous wear contact lens, yet many practitioners use this product for daily wear with multipurpose solutions. By 2002, more practitioners were prescribing Si-H contact lenses for continuous wear than in 2000, suggesting a growing confidence in that product for that mode of wear. A comparison with an earlier survey shows there is an increase in continuous wear from 1.6 per cent to 11.7 per cent over a five-year period.

Adult↗
PubMed1995

Orofacial pain resulting from ill-fitting dentures.

The patient who presents to the physician with a history of facial pain can be a diagnostic challenge. The etiology can be elusive, and this problem is compounded by the subjective nature and the often multi-factorial causes of facial pain. The differential diagnoses to be considered include both local and systemic disorders such as neuropathy, myofascial pain, dentoalveolar pathoses, and psychological disturbances, among others. This paper presents the case of a patient with a history of left auricular pain that was managed for over 12 years with drug therapy with only limited success. A thorough head and neck evaluation revealed probable myofascial pain with a poorly occluding set of complete dentures as a potential etiology. Fabrication of a new set of dentures and modification of the patient's denture-wearing habits has produced an almost complete remission of the pain. This case demonstrates the importance of a dental consultation to rule out a possible oral-musculoskeletal and/or dental etiology in the management of the patient with facial pain.

Denture, Complete↗
PubMed2005

Development of an integrated CAD-FEA process for below-knee prosthetic sockets.

BACKGROUND: Computer-aided design and manufacturing has been successfully used in prosthetic applications since 1980s. It simplifies the socket rectification process and improves reproducibility but does not introduce any new principle into socket design. Integrating finite element analysis to CAD will provide a more objective assessment of socket fit and improve the chance of a successful first fitting. METHODS: Current study aims to establish a finite element model generation technique directly from geometrical information of commercial prosthetic CAD workstation. A program developed in-house automatically performs meshing of the stump geometry and assigns suitable material properties, load and boundary conditions to the model. The model was validated by comparing predicted pressure with experimentally measured values for one amputee subject. FINDINGS: The predicted pressure distribution has an root-mean-square error of 8.8 kPa compared to experimental values at 10%, 25% and 50% of the gait cycle. INTERPRETATION: Current method was able to develop a finite element model to predict interface pressure reasonably well and can be integrated with prosthetic CAD system to provide quantitative feedback to the prosthetist in an automated process.

Artificial Limbs↗
PubMed1998

Use of a loudness model for hearing-aid fitting. I. Linear hearing aids.

A model for predicting loudness for people with cochlear hearing loss is applied to the problem of prescribing the frequency-gain characteristic of a linear hearing aid. It is argued that a reasonable goal is to make all frequency bands of speech equally loud while achieving a comfortable overall loudness; this can maximize the proportion of the speech spectrum that is above the absolute threshold for a given loudness. In terms of the model this means that the specific loudness pattern evoked by speech of a moderate level (65 dB SPL) should be reasonably flat (equal loudness per critical band), and the overall loudness should be similar to that evoked in a normal listener by 65 dB speech (about 23 sones). The model is used to develop a new formula - the 'Cambridge formula' - for prescribing insertion gain from audiometric thresholds. It is shown that, for a fixed overall loudness of 23 sones, the Cambridge formula leads to a higher calculated articulation index than three other commonly used prescriptive methods: NAL(R), FIG6 and DSL.

Auditory Threshold↗
PubMedDate not supplied

Self-reported outcome in new hearing aid users over a 24-week post-fitting period.

Evidence for the existence of auditory acclimatization is mixed, and the implications for clinical practice are unclear. The aim of this study was to seek evidence of perceived changes in performance over a 24-week post-fitting period. Thirty-two new, elderly subjects were recruited and fitted monaurally with the same model of linear, programmable hearing aid that provided in excess of 20-dB insertion gain at 2000-4000 Hz. The Glasgow Hearing Aid Benefit Profile (GHABP) was used to measure self-reported changes over time. The questions concerning benefit and satisfaction were modified to produce two versions: half of the subjects reported changes relative to the time of fitting, while the remainder reported changes relative to the previous occasion on which they completed the GHABP (3 weeks earlier). Subjects reported using hearing aids in excess of 90% of the time when in listening situations that cause difficulty. The median residual disability measure from the GHABP remained low (10-20%) over the duration of the study. The median scores for additional benefit and satisfaction showed a small but statistically significant improvement over the first 3 months of hearing aid use but only for the subjects who referenced this to their perceived performance 3 weeks earlier. The limited evidence for self-reported improvements in benefit and satisfaction over time reported to date must be tempered by the possibility of response bias arising from the method used to measure changes over time.

Adaptation, Physiological↗
PubMedDate not supplied

Comparison of the marginal fit of Procera AllCeram crowns with two finish lines.

PURPOSE: The purpose of this study was to determine the influence of two finish line configurations on the marginal accuracy of Procera AllCeram crowns. MATERIALS AND METHODS: Twenty mechanized specimens of brass were fabricated for complete-coverage crowns. Two finish line designs were used: chamfer and rounded shoulder. AllCeram crowns were fabricated, and the fit of the crowns to the dies was recorded from the buccal and lingual margins. An image-analysis program was used to measure the gap. The results were subjected to statistical analysis using a Student's t test for separate samples and Student's paired t test. RESULTS: No significant differences were observed between the buccal and lingual measurements. When the values of the buccal and lingual measurements were averaged, there were no significant differences in the marginal gap, horizontal discrepancy, or internal adaptation of the axial wall, but there were significant differences in the vertical discrepancy, absolute marginal discrepancy, and internal discrepancy between the two finish line designs. CONCLUSION: The marginal gap was within the range of clinical acceptability. Some of the variables were influenced by the two finish lines tested.

Aluminum Oxide↗
PubMedDate not supplied

Disturbance caused by varying propagation delay in non-occluding hearing aid fittings.

The disturbance caused by various short propagation delays to the perception of external sounds and own voice for a non-occluding hearing aid was investigated. Ten normal-hearing and 10 mildly hearing-impaired individuals listened to external sounds and their own voice while wearing non-occluding devices providing 10dB of linear gain. Participants rated the disturbance caused by delays of 2, 4 and 10ms to music, running speech, and their own voices. The results indicated greater disturbance for the longest delay for both subject groups when judging own voice, with the ratings of the hearing-impaired participants being lowest. Normal-hearing participants also judged the 10-ms delay as more disturbing for the external sounds. Owing to the listening conditions with constant gain from 800Hz and above, the results apply directly only to this experiment. Disturbance ratings for all delays were low, which suggests that any of those tested would be acceptable for this application.

Adult↗
PubMed2001

Transient forces generated by projectiles on variable quality mouthguards monitored by instrumented impact testing.

OBJECTIVES: (a) To determine the force-time trace that occurs when a spring mounted simulated upper jaw is impacted; (b) to examine if mouthguards of variable quality have significant influence on such force-time traces; (c) to attempt to relate physical events to the profile of the force-time traces recorded. METHODS: A simulated jaw, consisting of ceramic teeth inserted into a hard rubber arch reinforced with a composite jawbone, was fitted with various mouthguards as part of a previous round robin study. A clinical assessment distinguished good, bad, and poor mouthguards, and these were each fitted to the jaw, which was then submitted to instrumental impact tests under conditions expected to produce tooth fractures. The force-time trace was recorded for such impact events. RESULTS: The spring mounting method caused two distinct peaks in the force-time trace. The initial one was related to inertia effects and showed an increase in magnitude with impactor velocity as expected. The second peak showed features that were related to the differences in the mouthguards selected. CONCLUSIONS: The use of a force washer within a conical ended impactor enabled force-time traces to be recorded during the impact of a spring mounted simulated jaw fitted with mouthguards of variable quality. The spring mounting system causes an initial inertial peak followed by a second peak once the spring mount has fully compressed. Good fitting guards, which keep most teeth intact, result in high stiffness targets that in turn generate high reaction forces in the impactor. If the spring mounting is omitted, the two peaks are combined to give even higher reaction forces. The force-time trace offers some potential for assessing both overall mouthguard performance and individual events during the impact sequence. Mouthguards with good retention to the jaw remained attached during the impact event and helped to preserve the structural integrity of the target. This in turn developed high forces in the second part of the force-time trace. Guards that detached during impact and allowed tooth fractures showed lower forces in the second part of the test. The force profile measured offered some quantitative support to, and agreement with, the observed clinical quality of the mouthguards.

Athletic Injuries↗
PubMed2000

Insertion gain measurements using two low-powered analogue hearing aids.

Differences between insertion gain measurements and coupler measurements were investigated using two different hearing aids, to assess the accuracy of hearing aid fitting methods which involve the use of real-ear-to-coupler differences (RECDs). The hearing aids used were the NHS BE19 and the Lavis X11. They were allocated alternately to 80 new adult hearing aid users, and insertion gain measurement was carried out with the allocated aid on all subjects, and with both hearing aids on 36 subjects. Coupler measurements were also carried out with both hearing aids, at two different gain settings. Comparison of the coupler measurements and the insertion gain measurements suggests that the differences in insertion gain produced by different hearing aids cannot be predicted accurately from the differences in coupler gain measurements produced by the same aids. Although the use of RECDs measured using insert earphones may accurately predict the real-ear performance of some models of hearing aid, this method may not produce equally satisfactory results with other models.

Hearing Aids↗
PubMed2005

The effects of expansion on the objective and subjective performance of hearing instrument users.

The present study investigated the effects of expansion on the objective and subjective performance of 20 hearing instrument users fitted binaurally with digital ITE products. Objective performance was evaluated in quiet using the Connected Speech Test and in noise using the Hearing in Noise Test. Subjective performance was evaluated in two ways: (a) by having each participant rate their satisfaction regarding the amount of noise reduction they perceived in each expansion condition on a daily basis and (b) by having each participant indicate which expansion condition they preferred following the completion of a two-week trial. Results indicated that expansion significantly reduced low-level speech perception performance; however, satisfaction and preference ratings significantly increased when using expansion. The effect of degree of hearing loss, expansion kneepoint, and expansion ratio on the effectiveness of expansion for a given listener was discussed.

Acoustic Stimulation↗
PubMed2005

Mucous membrane graft versus Gunderson conjunctival flap for fitting a scleral shell over a sensitive cornea.

PURPOSE: To assess the efficacy of full-thickness mucous membrane grafts in forming a total and permanent corneal cover. METHODS: The records of all patients with a phthisical globe or microphthalmos who underwent a corneal covering procedure to allow comfortable wearing of a cosmetic scleral shell between March 1999 and July 2004 were reviewed. RESULTS: Ten eyes underwent a Gunderson conjunctival flap (group A), and 9 eyes underwent a full-thickness mucous membrane graft (group B). In group A, 3 eyes had total flap retraction and one eye had partial flap retraction. In group B, only one eye had partial graft retraction. The flap retraction in group A occurred in those eyes with a corneal diameter of 9 mm or more. CONCLUSIONS: The results from this small series of patients indicate that a full-thickness mucous membrane graft might be a better alternative for corneal coverage than a Gunderson conjunctival flap, especially in eyes with conjunctival scarring or relatively large corneal diameter.

Adult↗
PubMed2000

Fitting hearing aids to first-time users.

Clinical experience indicates that first-time hearing aid users prefer less gain and lower maximum output levels than experienced users. This hypothesis was tested on 20 subjects being fitted with their first aids. The study was double blinded by using a programmable hearing aid, set to either the standard setting according to the manufacturer's software or to reduced gain and maximum output. Half of the subjects started with one hearing aid and half with the other, changing to the other hearing aid after 3 days trial with each setting. At the end of the study, subjects stated preference in specified situations and overall. No significant differences in APHAB, sound quality, estimated communication ability or perceived loudness scores were seen for the two settings. Nine subjects preferred the standard setting, seven the reduced setting and four were undecided. No correlation could be found between preference and audiological variables.

Acoustic Stimulation↗
PubMedDate not supplied

Expectations about hearing aids and their relationship to fitting outcome.

Clinicians are often concerned that unrealistic prefitting expectations can have a negative impact on fitting success for new, hearing aid wearers. To investigate this concern and to explore the potential value of measuring expectations, we developed the Expected Consequences of Hearing aid Ownership (ECHO) questionnaire as a companion to the Satisfaction with Amplification in Daily Life questionnaire. Four experiments were conducted to (1) determine realistic expectations for hearing aids, (2) evaluate expectations of new users, (3) measure reliability of prefitting expectations, and (4) assess relationships between prefitting expectations and postfitting satisfaction. Novice hearing aid users were found to have stable prefitting expectations about hearing aids, and these expectations were unrealistically high for the typical individual. There were many different expectation patterns across subjects. Of the four subscales of the ECHO, only one was predictive of the corresponding satisfaction data. Potential clinical applications are described.

Aged↗
PubMed1998

Comparison of axial and instantaneous videokeratographic data in keratoconus and utility in contact lens curvature prediction.

PURPOSE: Instantaneous radius of curvature data in corneal videokeratoscopy better represents corneal shape and local curvature changes in keratoconus than axial maps, especially in the periphery. Knowledge of instantaneous radius is especially important in keratoconus for analysis of the cone apex, which is often decentered. In this study, we quantitatively compared axial and instantaneous displays of videokeratographic data in keratoconus, with emphasis on apex curvature and position. We assessed the utility of instantaneous data for rigid gas permeable (RGP) contact lens curvature selection and compared it with data derived from the original axial displays in keratoconus. METHODS: We performed modern placido-based videokeratography on 35 eyes with clinically diagnosed keratoconus. We derived the apex curvature, the position of the apex relative to the center of the map, and the steep simulated keratometry (SIM-K) reading from axial and instantaneous videokeratographic displays. We also collected the RGP base curves for 28 eyes that were fit with a minimal apical bearing or clearance RGP contact lens. RESULTS: The instantaneous apex was consistently located closer to the center of the map than the axial apex. Means (and standard deviations) for the best fit RGP base curve, axial steep SIM-K, axial apex curvature, instantaneous steep SIM-K, and instantaneous apex curvature were 52.00 D +/- 5.92 D, 50.93 D +/- 5.94 D, 54.81 D +/- 7.14 D, 49.19 D +/- 5.54 D, and 56.86 D +/- 7.89 D, respectively. Statistical comparisons revealed axial steep SIM-K to best represent the RGP base curve for the entire group. Similarly, in the subset of patients with apex decentrations within 1 mm of the map center, the axial steep SIM-K best represented the RGP base curve. In the remaining decentered cone subset, the axial apex curvature best represented the base curve. CONCLUSIONS: Axial and instantaneous maps differ significantly in apical position and apex curvature in keratoconus. Although instantaneous radius may better represent corneal shape, axial curvatures better predict the final RGP base curve in keratoconus patients.

Algorithms↗
PubMed2006

Rehabilitation plasticity: influence of hearing aid fitting on frequency discrimination performance near the hearing-loss cut-off.

Several studies have already demonstrated that patients with steeply sloping hearing loss of cochlear origin exhibit an improvement in frequency discrimination performance at or around the cut-off frequency. This enhancement cannot be explained in terms of peripheral mechanisms and should rather be interpreted in terms of central reorganization: i.e., injury-induced cortical plasticity. However, the reversibility and time course of such reorganization has not yet been described. The main goal of the present study was therefore to investigate the occurrence of rehabilitation plasticity associated with hearing-aid fitting in human subjects. Nine subjects with steeply sloping hearing loss and who were candidates for auditory rehabilitation were tested. Discrimination-limen-for-frequency (DLF) enhancement was investigated at the frequency with the best DLF (bDLF) for each individual subject before and during auditory rehabilitation (at 1 month, 3 months and 6 months). From 1 month on, frequency discrimination performance decreased significantly at the bDLF frequency, while remaining stable at other frequencies. This normalization may reflect a new central reorganization reversing the initial injury-induced changes in the cortical map. A correlation between subject's age and alteration in DLF at 1 month was also found, suggesting that plasticity operates faster in younger patients.

Adult↗
PubMed2000

Prescribed clinician-fit versus as-worn coupler gain in a group of elderly hearing-aid wearers.

This study reports the prescribed, clinician-fit, coupler gain and the user-adjusted, as-worn coupler gain measured in 55 adults ranging in age from 60 to 83 years (M = 72.2 years). All participants were fit with linear, output-limiting compression, Class D circuits in full-concha, in-the-ear (ITE) shells. The NAL-R prescription rationale was used to generate target real-ear insertion gain (REIG) and coupler gain values. The clinician-fit gain was measured when the hearing aid was dispensed initially and was found to be a close match to the prescribed coupler gain. Both clinician-fit and as-worn gain were measured subsequently at approximately 2 weeks, 1 month, 6 months, and 1 year after the initial fitting. As-worn gain was measured as soon as the participant returned to the clinic for one of the follow-up visits by simply removing the hearing aids and placing them in the test chamber without any adjustments in volume control. At each follow-up session, the clinician then inspected the hearing aids, evaluated the instruments electroacoustically, readjusted the volume control to the setting used to match the prescribed gain in the initial fit, and measured the clinician-fit coupler gain once again. Results revealed that, despite the capability of the hearing aid to achieve coupler gain that is a close match to the prescribed gain, these users consistently selected as-worn gain that was generally 6-9 dB below that prescribed by the NAL-R formula. Of this 6-9 dB disparity, however, as much as 3-6 dB could be due to binaural summation effects not taken into consideration in the NAL-R prescriptive formula. In addition, 5.4% of the time, the hearing aids were found to be in less than ideal operating condition when removed for the as-worn gain measurements (e.g., weak or dead battery, cerumen occluding the sound bore, telecoil switch in the incorrect position).

Aged↗