SEARCH · Search PubMed
Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Computer graphics is here to stay and spreading. This article intends to be nothing more than a brief introduction of this new tool in the field of dentistry. We hope that our colleagues will welcome this new development and recognize it as an opportunity to make contact with the basic sciences.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
PURPOSE: The aim of this study was to examine the enamel thickness of the maxillary primary incisors of preterm children with very low birth weight (< 1,500 g) compared to full-term children with normal birth weight. METHODS: A total of 90 exfoliated maxillary primary central incisors were investigated using light microscopy and scanning electron microscopy (SEM). Three serial buccolingual ground sections of each tooth were examined under light microscopy, and maximum dimensions of the prenatally and postnatally formed enamel were measured. RESULTS: The enamel of preterm teeth was approximately 20% thinner than that for full-term teeth. Most of the reduction was observed in the prenatally formed enamel. This was 5 to 13 times thinner than that for full-term children (P<.001). The "catch-up" thickness of postnatally formed enamel did not compensate fully for the decrease in prenatal enamel (P<.001). Although none of the teeth used in this study had enamel defects visible to the naked eye, 52% of preterm teeth showed enamel hypoplasia under SEM, compared with only 16% found on full-term teeth (P<.001). These defects were present as pits or irregular, shallow areas of missing enamel. CONCLUSIONS: Preterm primary dental enamel is abnormal in surface quality, and is significantly thinner compared to full-term enamel. The thinner enamel is due mainly to reduced prenatal growth and results in smaller dimensions of the primary dentition.
Nerve injury following mandibular third molar (M3) removal is a rare but serious complication. The purpose of this article is to review the role of currently available imaging technologies to facilitate clinical decision-making in the setting of M3 surgery. Given findings suggestive of high risk for inferior alveolar nerve (IAN) injury, the clinician should consider additional imaging to assess better the anatomic relationship of the IAN and M3.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Dubowitz syndrome is a rare condition in which the affected individual presents with dysmorphic facial features and manifests growth retardation. Although the condition is well reported in the medical literature, the dental manifestations have not been discussed in great detail. Some of the dental features reported include macrodontia, hypodontia, delayed eruption, and midline diastema. The purpose of this case report was to describe a young Chinese patient with Dubowitz syndrome with specific oral features.
Dental trauma in children is a frequent event and may involve functional, esthetic and orthodontic complications. Replacement resorption and ankylosis are frequently diagnosed following avulsion and replantation, severe intrusive luxation, and less frequently as a consequence of lateral luxations and root fractures. The optimal treatment for an ankylotic permanent incisor is yet to be found. The treatment of ankylosis and replacement resorption of a permanent incisor following dental trauma is further complicated when it involves a growing child. It is often associated with increasing infraposition of the tooth, retarded growth of the alveolar bone and tilting of adjacent teeth. To avoid such complications an ankylosed tooth should be removed before they changes become so pronounced that they necessitate orthodontic intervention and compromise future prosthetic treatment. The purpose of this article is to review the literature dealing with the considerations involved in the treatment of a permanent incisor diagnosed with replacement resorption and ankylosis. Different treatment options are considered. Decoronation is described and discussed.
Incontinentia pigmenti (IP) is a genodermatosis with an X-linked dominant mode of inheritance, characterized by ectodermal, mesodermal, neurological, ocular, and dental manifestations. The purpose of this case study was to report the oral and dental manifestations of an IP case in a Venezuelan pediatric patient. A 9 year-old Venezuelan girl was evaluated. She showed macular pigmented lesions in her face, trunk, back, legs, and fingers as well as abnormal hair distribution, alopecia on the vertex, and hypoplasia of eyebrows. During the dental examination, conical shaped-teeth and delayed dental eruption was evidenced. The microanalytical examination showed dentin without significant alterations in the mineralization except for hypermineralization in focal areas. In addition, a decrease in the enamel mineralization was observed.
PURPOSE: The aim of this 3-year randomized controlled trial (RCT) was to compare biologic and technical treatment outcomes and patient satisfaction after early (< or = 14 days postimplantation) loaded implants with those of implants loaded after a healing period of 3 to 4 months in the edentulous maxilla. MATERIALS AND METHODS: Twenty-four patients with completely edentulous maxillae were randomized into a test group (n = 16) and a control group (n = 8). All patients received 5 or 6 solid screw-type titanium implants with sandblasted, large-grit, acid-etched (SLA) surfaces. In total, 142 implants were placed and 139 implants were loaded with full-arch prostheses. Clinical assessments were obtained at loading and after 3, 6, 12, 24, and 36 months. Radiographs of implants and existing teeth were taken at loading; after 6, 12, 24, and 36 months; and at 12, 24, and 36 months, respectively. RESULTS: The cumulative implant success rate 3 years after loading was 100%. At the 3-year examination the mean (P < or = .005), distal (P < or = .005), and mesial (P > .05) crestal bone levels were better in the test group. No significant differences between the test and control groups were noted for any other outcome measure. The most common adverse event in both groups was tooth-crown fracture. DISCUSSION: A review of the literature, both printed and electronic, revealed no study fulfilling the criteria of an RCT dealing with the early loading of maxillary full-arch prostheses. This study fulfills those criteria. CONCLUSION: In this study population it has been concluded that the early (approximately 2 weeks) loading protocol is a viable alternative to the standard (3 to 4 months) protocol in the rehabilitation of a completely edentulous maxilla with a complete implant-supported fixed prosthesis.
PURPOSE: The purpose of this study was to clarify the influence of changes of occlusal contacts on adjacent tooth displacement during articulation. MATERIALS AND METHODS: The amount and direction of displacement of the maxillary left first molar and adjacent teeth were measured using a displacement transducer, Type M-3. Seven subjects were included in this study. On the maxillary left first molar, 8 experimental occlusal contact points were established using platinum foil and these were divided into 2 groups, the buccal and lingual groups, which corresponded to the buccal and lingual cusps, respectively. RESULTS: During clenching, the buccal group showed differences in the direction of the tooth displacement paths among the 3 teeth (second premolar, first and second molar), but there was no difference in the lingual group and the direction of displacement of these 3 teeth was similar to the natural teeth. CONCLUSION: It is necessary to make at least one lingual occlusal contact point to obtain displacement of not only the abutment tooth but also the adjacent teeth.
Dens invaginatus is a dental malformation that may give rise to several complications. Caries of the invagination can severely weaken the whole tooth, making it susceptible to fracture. Subgingival fractures are major complications threatening tooth survival and usually require periodontal/orthodontic/prosthetic treatment if long-term viability is to be ensured. This article describes a case of single-session restoration of a fractured invaginated tooth by means of endodontic treatment followed by fragment reattachment.
Rubinstein Taybi syndrome or Broad Thumb and Hallux syndrome is a genetic multisystem disorder characterized by facial dysmorphism, growth retardation and mental deficiency. A ten-year-old boy who had come to the Department of Pedodontics, Ragas Dental College, Chennai, with the chief complaint of unaesthetic appearance with extra teeth revealed delay in the developmental milestones. The patient appeared to be hyperactive and mentally retarded. Extra oral features revealed distinctive facial appearance with a broad fore head, hypertelorism, broad nasal bridge and beaked nose. Intra oral features observed were talons cusps in the upper central and lateral incisors, mesiodens, carious teeth and plaque accumulation. Since the patient was hyper active and mentally retarded, the dental treatment was done under GA. The treatment plan and dental management of this patient are discussed in this case report.
Depending on tooth location, usually, dens evaginatus describes an anomaly of posterior teeth and talon cusp as an anomaly of anterior teeth. From the standpoint of developmental, morphological and histological considerations dens evaginatus is a more acceptable term to use and talon cusp should be considered as a subset of dens evaginatus. It mostly occurs as an isolated finding rather than an integral part of any disorder. Two cases of dens evaginatus along with other dental anomalies are reported.
Explore the source record for details and available documents.
PURPOSE: The purpose of this study was to compare mineral trioxide aggregate (MTA) and calcium hydroxide (Ca(OH)2) for their efficacies and time taken for formation of apical biological calcific barriers and resolution of periapical radiolucencies, if present at baseline, in teeth with unformed apices. METHODS: Twenty nonvital permanent maxillary incisors with unformed apices, stratified according to the size of periapical radiolucencies and stage of root development, were equally allocated to MTA and Ca(OH)2 groups. In group 1 (MTA group), after 7 days of disinfection with Ca(OH)2, MTA was packed into the apical one third of the root canals and obturation with gutta percha (GP) was performed in 90% (9/10) of cases within 15 to 30 days. In group 2 (Ca(OH)2 group), obturation was performed following clinical and radiographic depiction of the apical stop. RESULTS: The mean time taken for apical biological barrier formation was 3 +/- 2.9 months for group 1 and 7 +/- 2.5 months for group 2 (P=.008). The periapical radiolucencies were resolved in 4.6 +/- 1.5 months for group 1 and 4.4 +/- 1.3 months for group 2 (P=.83). The total treatment was completed in 0.75 +/- 0.4859 months and 7 +/- 2.5 months for groups 1 and 2, respectively. CONCLUSION: The 2 materials were found to be equally efficacious in the management of nonvital teeth with unformed apices. Time taken to complete the treatment and the biological barrier formation in group 1 was significantly less than that for group 2. The healing time for periapical radiolucencies was almost identical.
Electric current produced by corrosion of metals or used for diagnostic or therapeutic purposes has to pass through the dentin to reach the pulp. The electric resistance of the dentin, which influences the dentinal current intensity, is poorly documented in the literature. In this study 140 cylindrical dentin samples of human teeth were collected from four different regions of the tooth crown and their specific electrical resistance was measured. The recorded values vary with the orientation of the dentinal tubules ranging between 12.5 ohms and ohms. The linear temperature coefficient of the specific resistance is -0.0132 degrees C-1 for the temperature interval of 20 to 34 degrees C. It is assumed that the mechanism underlying electric conduction in dentin is related to the transport of ions in the dentinal fluid.