Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Polymerization”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41Linked to original sources

Characterisation of polymeric surfactants that are glutathione transferase mimics.

Catalysts that can detoxify reactive organic chemicals (electrophiles) could be of potential beneficial use. Electrophilic compounds are common toxic agents that are conjugated to endogenous nucleophiles (i.e. glutathione) in an enzyme catalysed reaction (by glutathione transferases). Here, the properties of newly synthesised polymeric surfactant catalysts, which are glutathione transferase mimics, are described (which are not limited to the glutathione thiol donor). Reactions studied were nucleophilic aromatic substitution with 1-chloro-2,4-dinitrobenzene (CDNB) and thiolysis of p-nitrophenyl acetate. Polymeric quaternary ammonium salts synthesised starting from 2-(dimethyl-amino)ethylmethacrylate or 1,3-bis(dimethylamino)isopropylmethacrylate were used as surfactants. Five polysoaps were studied possessing different charge density and different density of hydrophobic chains. In comparison with cetyltrimethylammonium bromide, the polymeric surfactants were clearly more efficient catalysts (i.e. 4.9 vs. 150 (10(3) per M(2)/s) with benzyl hydrosulfide and CDNB). Polymers with high charge and hydrophobic density were most efficient. With a given catalyst, increasing hydrophobicity of the thiol substrate parallels increasing reaction rates (e.g. 0.7- > or = 37 (10(3) per M(2)/s) with CDNB). Concentration of the substrate in the micellar pseudophase together with solvent shielding is suggested as the underlying rate enhancement mechanism. Dead-end Meisenheimer complex stabilisation, where an extremely electrophilic compound (1,3,5-trinitrobenzene) reversibly interacts with glutathione is seen both with glutathione transferases and the polymeric surfactant catalysts. The degree of stabilisation follows catalytic efficiency and thus supports the above structure activity relationships. In conclusion, polymeric materials that can perform biological functions in detoxication are described, as well as their optimal properties.

Catalysis↗

Analysis of composite type and different sources of polymerization light on in vitro toothbrush/dentifrice abrasion resistance.

OBJECTIVES: This study examined toothbrush/dentifrice abrasion of a photo-activated prosthetic composite (dentin and enamel variations) for the purpose of evaluating the influence of polymerization sources on abrasive wear. METHODS: A photo-activated prosthetic composite material (Artglass) was assessed. Dentin and enamel variations were polymerized using a proprietary photo-curing unit with two xenon stroboscopic lamps (UniXS), and other enamel specimens were polymerized either with a laboratory photo-curing unit with three fluorescent tubes or with a high intensity unit with two metal halide lamps. All specimens were stored in water for 14days and subjected to toothbrush/dentifrice abrasion (350g vertical load) using an abrasive slurry (Colgate Fluoriguard) and a toothbrush (Oral-B 40). The amount of vertical loss and the surface roughness of the specimens after 20,000 strokes were determined by profilometer. Average values of groups of five specimens were compared using analysis of variance (ANOVA) and Sheffe's S intervals (p<0.05). RESULTS: When polymerizing with the proprietary unit, the abrasion and surface roughness of the enamel material required respective means of 34.08microm (+/-3.66) and 1.00microm (+/-0.08), and the those of the dentin material required means of 42.02microm (+/-5.62) and 1.23microm (+/-0.20). Both abrasion and surface roughness after toothbrushing of the enamel material were significantly smaller than were those of the dentin material. The abrasion of specimens polymerized with the metal halide unit required a mean of 23.89microm (+/-6.17) and demonstrated minimal wear. CONCLUSIONS: The use of a high intensity metal halide photo-curing unit effectively enhanced the abrasion resistance of the composite. Surfaces of restorations should be covered with the enamel material in order to achieve smoothness and wear resistance.

Analysis of Variance↗

SDF-1-induced actin polymerization and migration in human hematopoietic progenitor cells.

OBJECTIVE: The capacity of hematopoietic progenitor cells (HPCs; CD34(+) cells) to respond to chemotactic stimulation is essential for their homing efficiency, e.g., during stem cell transplantation. Previous studies established that stromal cell-derived factor-1 (SDF-1) and its receptor CXCR-4 play an important role in the homing of HPCs. The aim of the present study was to analyze SDF-1-induced actin polymerization and migration of HL-60 cells and primary human CD34(+) cells. MATERIALS AND METHODS: SDF-1-induced migration of CD34(+) cells from cord blood (CB) and peripheral blood (PB) across fibronectin-coated filters was measured in a Transwell assay. Actin polymerization was detected using fluorescent phalloidin and analyzed by confocal microscopy and FACS analysis. RESULTS: SDF-1 induced a rapid and transient increase in actin polymerization and in polarization of the actin cytoskeleton in primary CD34(+) cells and HL-60 cells. SDF-1 was found to induce significantly more actin polymerization in CB CD34(+) cells that show fast migration in vitro compared to slow migrating PB CD34(+) cells. Moreover, CB CD34(+) cells that had migrated toward SDF-1 showed an elevated and prolonged rise in F-actin upon second exposure to SDF-1 compared to nonmigrated cells, although both cell types expressed equal levels of the SDF-1 receptor CXCR-4. CONCLUSIONS: The relatively high migratory capacity of CB-derived human HPCs is not related to cellular polarization or high expression of the SDF-1 receptor but is largely determined by their capacity to efficiently polymerize F-actin in response to SDF-1.

Actins↗

Adriamycin release from flower-type polymeric micelle based on star-block copolymer composed of poly(gamma-benzyl L-glutamate) as the hydrophobic part and poly(ethylene oxide) as the hydrophilic part.

Star-block copolymer based on PBLG as the hydrophobic part and PEO as the hydrophilic one (as abbreviated GEG) was synthesized and characterized. Polymeric micelle was prepared by the diafiltration method. From the measurement of photon correlation spectroscopy, the nanoparticle sizes of GEG-1, GEG-2 and GEG-3 were 106.5+/-59.2, 43.8+/-0.7 and 13.5+/-1.0 nm in number average, respectively, indicating of the formation of polymeric micelle. Also, the nanoparticle sizes were dependent on the PBLG chain length, i.e. the more PBLG content in the copolymer, the larger the particle size. From the observation of transmission electron microscope(TEM), GEG-2 block copolymer had almost spherical shapes with size range about 20-70 nm, that was similar to particle size measurement. Fluorescence spectroscopy measurement indicated that GEG block copolymers associated in water to form polymeric micelles and critical micelle concentration (CMC) values of the block copolymers decreased with increasing PBLG chain length in the block copolymer. Characteristic peaks of the protons of the benzyl group in the PBLG and the methylene protons adjacent to the benzyl group of the PBLG segment in the GEG-2 nanoparticles appeared in 7.2 approximately 7.4 and 5.0 approximately 5.2 ppm, respectively, and disappeared in D(2)O, indicating the restricted motions of these protons within the micellar core and the very rigid structure of the PBLG core in the GEG polymeric micelles. Release of ADR from the polymeric micelles in vitro was slower in longer PBLG chain length and higher loading contents of ADR.

Antineoplastic Agents↗

Molecular morphology of fibrin monomers and early oligomers during fibrin polymerization.

The structural features of early fibrin oligomers produced during the initial stages of polymerization were investigated by rotatory shadowing after cryotechnical preparation. The building blocks of polymerization, namely fibrin monomer units (in analogy to fibrinogen itself), were found to exhibit a high degree of flexibility which is independent of fibrinopeptide A and B removal. Early polymers exhibited directed longitudinal growth and were frequently branched. Along the main oligomer axis, fibrin monomer units were randomly orientated. Within early oligomers, a given fibrin monomer unit was found to establish a single contact with each of its two neighbors, suggesting that during the early stages of polymerization, only one polymerization and one binding site are activated per fibrinogen molecule (becoming an AB2 fibrin monomer unit). This morphological feature was corroborated by the finding that early oligomer fractions are deficient in only 50% of releasable fibrinopeptide A. Early associations between AB2 fibrin monomer units were demonstrated to be reversible and to occur in the absence of direct domainal contact; interactions thus presumably occur via fine molecular protrusions on either D or E domains. The arrangement of AB2 fibrin monomer units within early oligomers suggests that, with respect to their structural organization, fibrinogen molecules are radially symmetrical through the E domain (implying an antiparallel organization of polymerization and binding sites). This pattern is inconsistent with a "top-bottom" model, and thus with "half-staggered double-stranded" polymer growth. The methodological problems responsible for the apparent conflict with previous morphological findings are discussed.

Fibrin↗

Solubilization of cyclosporin A in dextran-g-polyethyleneglycolalkyl ether polymeric micelles.

Solubilization of the poorly water-soluble drug, Cyclosporin A (CsA), in aqueous dispersions of dextran-grafted-polyethyleneglycolalkyl ether (DEX-g-PEG-Cn) polymeric micelles was examined as a function of copolymer structure. In aqueous solution, DEX-g-PEG-Cn form polymeric micelles of low critical association concentrations (CAC) and small micelle sizes as determined by fluorescence spectroscopy and dynamic light scattering (DLS). Copolymers with longer polysaccharide chain showed larger CAC and mean diameter. The percentage of CsA loading into micelles was determined by high performance liquid chromatography. It was significantly larger in polymeric micelles compared to unmodified dextrans. It increased with increasing number of PEG-Cn units grafted per dextran chain and decreasing dextran molecular weight. The cytotoxicity of DEX-g-PEG-C(16) polymeric micelles towards Caco-2 cells, tested by MTT cytotoxicity assay, was significantly lower than that of free PEG-C(16) molecules. It can be concluded that the length of the hydrophilic part as well as the content and chemical nature of the hydrophobic substituents have an important effect on the ability of polymeric micelles to solubilize poorly-water soluble drugs.

Caco-2 Cells↗

Cofilin produces newly polymerized actin filaments that are preferred for dendritic nucleation by the Arp2/3 complex.

One of the earliest events in the process of cell motility is the massive generation of free actin barbed ends, which elongate to form filaments adjacent to the plasma membrane at the tip of the leading edge. Both cofilin and Arp2/3 complex have been proposed to contribute to barbed end formation during cell motility. Attempts to assess the functions of cofilin and Arp 2/3 complex in vivo indicate that both cofilin and Arp2/3 complex contribute to actin polymerization: cofilin by severing and Arp2/3 by nucleating and branching. In order to determine if the activities of cofilin and Arp2/3 complex interact, we employed a light microscope-based assay to visualize actin polymerization directly in the presence of both proteins. The results indicate that cofilin generates barbed ends to increase the mass of freshly polymerized F-actin but does not directly affect the activity of Arp2/3 complex. However, while ADP, ADP-Pi, and newly polymerized ATP-filaments are all capable of supporting Arp2/3-mediated branching, newly polymerized F-actin supports most of the Arp2/3-induced branch formation. The results suggest that, in vivo, cofilin contributes to barbed end formation by inducing the initial increase in the number of barbed ends leading to increased ATP-F-actin, which in turn supports higher levels of dendritic nucleation by active Arp2/3 complex.

Actin Cytoskeleton↗

Sonochemical polymerization of benzene derivatives: the site of the reaction.

Sonochemical polymerization of benzene and halogen-substituted benzenes has been studied. The difference of absorption spectra of polymerization products can be explained qualitatively using bond energies of the primary products. The relative rate constant of the polymerization reaction is apparently proportional to the inverse of the vapour pressure of the liquids. Using this relation, we analysed the relative rate constant of the polymerization in benzene/chrolobenzene mixtures. From this, we conclude that sonochemical polymerization proceeds in the vapour phase of a bubble.

Journal Article↗

Effects of pre-cooling and pre-heating procedures on cement polymerization and thermal osteonecrosis in cemented hip replacements.

Numerical studies were performed to investigate bone cement polymerization, temperature history and thermal osteonecrosis in cemented hip replacements with finite element methods. In this paper, the effects of pre-cooling and pre-heating of the prosthesis and/or the cement prior to implantation were simulated. It was found that the cement polymerization initiated near the bone-cement interface and progressed toward the prosthesis when both the cement and prosthesis were initially at room temperature. When the prosthesis and/or cement were pre-cooled, a reduction of the peak temperature at the bone-cement interface resulted, and this may reduce thermal osteonecrosis. However, this also slowed the polymerization process, and may result in a weaker bone cement. If the prosthesis was significantly initially heated, bone cement polymerization reversed reaction direction, started from the cement-prosthesis interface and proceeded toward the bone. Such polymerization direction may reduce or eliminate the formation of voids at the cement-prosthesis interface. Numerical results also showed that pre-heating seemed unlikely to produce significant thermal damage to the bone. The method of pre-heating the prosthesis prior to implantation may decrease the likelihood of cement-prosthesis loosening and increase the life of total hip arthroplasty.

Arthroplasty, Replacement, Hip↗

Use of polymeric indicator for electrochemical DNA sensors: poly(4-vinylpyridine) derivative bearing [Os(5,6-dimethyl-1,10-phenanthroline)2Cl]2+.

A poly(4-vinylpyridine) (PVP) derivative bearing redox-active osmium complexes, PVP-[Os(5,6-dmphen)(2)Cl](2+) (5,6-dmphen = 5,6-dimethyl-1,10-phenanthroline), was employed as a hybridization indicator for electrochemical DNA sensors. PVP-[Os(5,6-dmphen)(2)Cl](2+) exhibited approximately 1000 times higher sensitivity than the corresponding monomeric analogue, [Os(5,6-dmphen)(3)](2+), in DNA determination due to polymeric effects. The detection limit of the present sensor was approximately 0.5 amol. Another merit of the polymeric indicator is that the redox potential was found to be +360 mV (vs Ag/AgCl), which is significantly lower than that reported for the monomeric analogue (+672 mV). The polymeric indicator was applicable to the discrimination of single- and double-base-mismatched DNAs from fully matched target DNA. The polymeric indicator can be removed from the electrode surface by rinsing the electrode in a high-temperature buffer for 6 min, and thus, the polymeric indicator-based DNA sensor can be used repeatedly.

Biosensing Techniques↗

Polymerization site in the beta chain of fibrin: mapping of the B beta 1-55 sequence.

The formation of a fibrin clot occurs through binding of putative complementary sites, called fibrin polymerization sites, located in the NH2- and COOH-terminal domains of fibrin monomer molecules. In this study, we have investigated the structure of the NH2-terminal fibrin polymerization site by using fibrinogen-derived peptides and fragments. Fibrinogen was digested with Crotalus atrox protease III, to two major molecular species: a Mr 325,000 derivative (Fg325) and a peptide of Mr 5000. The peptide and its thrombin-cleavage product were purified by ion-exchange and reverse-phase HPLC; the authenticity of the B beta 1-42 and beta 15-42 peptides, respectively, was confirmed by amino acid sequencing. Since Fg325 had decreased thrombin coagulability, we addressed the question of whether the peptide B beta 1-42 contained a fibrin polymerization site. In order to identify and map the site, the peptides B beta 1-42 and beta 15-42 were tested for their ability to inhibit fibrin monomer polymerization. In addition the following peptides prepared by chemical synthesis were also tested: beta 15-18, beta 15-26, beta 24-42, beta 40-54, beta 50-55, and alpha 17-19-Pro. While B beta 1-42 had no inhibitory activity, the peptide devoid of fibrinopeptide B, beta 15-42, was a strong inhibitor. The peptides beta 15-18, beta 15-26, and beta 15-42 decreased the rate of fibrin polymerization by 50% at a molar excess of the peptide to fibrin monomer of 500, 430, and 50, respectively. The peptides beta 24-42, beta 40-54, and beta 50-55 were inactive.(ABSTRACT TRUNCATED AT 250 WORDS)

Amino Acid Sequence↗

Polymerization of the tubulin-colchicine complex: relation to microtubule assembly.

The polymerization of purified tubulin-colchicine complex, which results in polymers different from microtubules under microtubule-promoting conditions, has been characterized. It proceeds as a nucleated condensation polymerization, requires Mg2+, and is inhibited by small concentrations of Ca2+. Polymerization requires GTP binding, but GDP is inhibitory. The GTPase activity proceeds, but it is unlinked to polymerization. The thermodynamic characteristics of the growth reaction, namely, the apparent changes of free energy, enthalpy, entropy, heat capacity, and preferential interaction with H+ and Mg2+, are very similar to those of microtubule assembly. It is proposed that the interactions responsible for the two types of polymerization are very similar and that the molecular mechanism of microtubule inhibition by colchicine may consist in a drug-induced distortion of the normal protomer bonding geometry.

Animals↗

Taxol effect on tubulin polymerization and associated guanosine 5'-triphosphate hydrolysis.

Taxol has been used as a tool to investigate the relationship between microtubule assembly and guanosine 5'-triphosphate (GTP) hydrolysis. The data support the model previously proposed [Carlier, M.-F., & Pantaloni, D. (1981) Biochemistry 20, 1918] that GTP hydrolysis is not tightly coupled to the polymerization process but takes place as a monomolecular process following polymerization. The results further indicate that the energy liberated by GTP hydrolysis is not responsible for the subsequent blockage of GDP on polymerized tubulin. When tubulin is polymerized in the presence of 10-100 microM taxol, the rapid formation of a large number of very short microtubules (l less than 1 micron) is accompanied by the development of turbidity to a lesser extent than what is observed when the same weight amount of longer microtubules (l = 5 microns) is formed. A slower subsequent turbidity increase corresponds to the length redistribution of these short microtubules into 3-5-fold longer ones without any change in the weight amount of polymer. The evolution of the rate of length redistribution with the concentration of taxol suggests a model within which taxol would bind to dimeric tubulin and to tubulin present at the ends of microtubules with a somewhat 10-fold lower affinity than to polymerized tubulin embedded in the bulk of microtubules. In agreement with this model, binding of taxol to the tubulin-colchicine complex in the dimeric form could be measured from the increase in the GTPase activity of the tubulin-colchicine complex accompanying taxol binding.

Alkaloids↗

Kinetics of polymerization of a fluoresceinated derivative of complement protein C9 by the membrane-bound complex of complement proteins C5b-8.

The fluorescence self-quenching by energy transfer of FITC-C9, a fluoresceinated derivative of human complement protein C9 [Sims, P.J. (1984) Biochemistry (preceding paper in this issue)], has been used to monitor the kinetics of C9 polymerization induced by the membrane-associated complex of complement proteins C5b-8. Time-based measurements of the fluorescence change observed during incubation of FITC-C9 with C5b-8-treated sheep red blood cell ghost membranes at various temperatures revealed that C9 polymerization induced by the C5b-8 proteins exhibits a temperature dependence similar to that previously reported for the complement-mediated hemolysis of these cells, with an Arrhenius activation energy for FITC-C9 polymerization of 13.3 +/- 3.2 kcal mol-1 (mean +/- 2 SD). Similar measurements obtained with C5b-8-treated unilamellar vesicles composed of either egg yolk phosphatidylcholine (egg PC), dipalmitoylphosphatidylcholine (DPPC), or dimyristoylphosphatidylcholine (DMPC) revealed activation energies of between 20 and 25 kcal mol-1 for FITC-C9 polymerization by C5b-8 bound to these membranes. Temperature-dependent rates of C9 polymerization were observed to be largely unaffected by the phase state of membrane lipid in the target C5b-8 vesicles. The significance of these observations of the mechanism of C9 activation of membrane insertion is considered.

Animals↗

Characterization of soluble polymerized fibrin formed in the presence of excess fibrinogen fragment D.

Polymerization of fibrin is inhibited in the presence of excess fibrinogen fragment D. This study was performed in order to test the proposal that these inhibited solutions contain short linear polymers of fibrin (protofibrils) whose further polymerization is prevented as a result of attachment of a molecule of fragment D at each end. Negative-stain electron micrographs, intrinsic viscosities, angular dependence of light scattering intensity, and kinetics of the increase of the scattered intensity with polymerization all were found to support the above model of the inhibited polymer and to reflect the presence of a broad distribution of the lengths of the inhibited fibrin polymers. Furthermore, sodium dodecyl sulfate-polyacrylamide gel electrophoresis of polymers stabilized with gamma-dimer cross-links introduced by factor XIIIa demonstrates cross-linking of fragment D to fibrin oligomers. Cross-linked polymers have been separated from excess fragment D by gel exclusion chromatography in 1 M urea. (In the absence of urea, the purified polymers very slowly associate to fibers.) The observation of the relative stability of short isolated inhibited protofibrils and the decrease or absence of inhibition of fibrin gelation when fragment D was added to solutions in which fibrin had been given time to polymerize to long protofibrils demonstrate that the inhibitory effect of fragment D occurs as a result of inhibition of the first fibrin polymerization step.

Animals↗

Direct evidence for ADP-Pi-F-actin as the major intermediate in ATP-actin polymerization. Rate of dissociation of Pi from actin filaments.

The sequence of reactions involved in the polymerization of ATP-actin and accompanying hydrolysis of ATP has been investigated by using a new glass-fiber filter assay. The assay allows the rapid separation of filaments from monomeric actin, and therefore the straightforward identification of the nucleotide bound to F-actin in the time course of polymerization, using double-labeled [gamma-32P,3H]ATP. The data bring a direct confirmation of the existence of the previously proposed ATP-F-actin intermediate in the time course of polymerization. Moreover, comparison of the hydrolyzed ATP (i.e., acid-labile [32P]Pi) and of 32P bound to F-actin provides direct evidence for the second intermediate ADP-Pi-F-actin in the polymerization process. This latter species is the major transient in the polymerization of ATP-actin, its lifetime being of the order of minutes.

Actins↗

Effects of CapZ, an actin capping protein of muscle, on the polymerization of actin.

We have studied the interaction of CapZ, a barbed-end actin capping protein from the Z line of skeletal muscle, with actin. CapZ blocks actin polymerization and depolymerization (i.e., it "caps") at the barbed end with a Kd of approximately 0.5-1 nM or less, measured by three different assays. CapZ inhibits the polymerization of ATP-actin onto filament ends with ATP subunits slightly less than onto ends with ADP subunits, and onto ends with ADP-BeF3- subunits about as much as ends with ADP subunits. No effect of CapZ is seen at the pointed end by measurements either of polymerization from acrosomal processes or of the critical concentration for polymerization at steady state. CapZ has no measureable ability to sever actin filaments in a filament dilution assay. CapZ nucleates actin polymerization at a rate proportional to the first power of the CapZ concentration and the 2.5 power of the actin concentration. No significant binding is observed between CapZ and rhodamine-labeled actin monomers by fluorescence photobleaching recovery. These new experiments are consistent with but do not distinguish between three models for nucleation proposed previously (Cooper & Pollard, 1985). As a prelude to the functional studies, the purification protocol for CapZ was refined to yield 2 mg/kg of chicken breast muscle in 1 week. The activity is stable in solution and can be lyophilized. The native molecular weight is 59,600 +/- 2000 by equilibrium ultracentrifugation, and the extinction coefficient is 1.25 mL mg-1 cm-1 by interference optics. Polymorphism of the alpha and beta subunits has been detected by isoelectric focusing and reverse-phase chromatography. CapZ contains no phosphate (less than 0.1 mol/mol).

Actins↗

Polymerization of Antarctic fish tubulins at low temperatures: energetic aspects.

Tubulins were purified from the brain tissues of three Antarctic fishes, Notothenia gibberifrons, Notothenia coriiceps neglecta, and Chaenocephalus aceratus, by ion-exchange chromatography and one cycle of temperature-dependent microtubule assembly and disassembly in vitro, and the functional properties of the protein were examined. The preparations contained the alpha- and beta-tubulins and were free of microtubule-associated proteins. At temperatures between 0 and 24 degrees C, the purified tubulins polymerized readily and reversibly to yield both microtubules and microtubule polymorphs (e.g., "hooked" microtubules and protofilament sheets). Critical concentrations for polymerization of the tubulins ranged from 0.87 mg/mL at 0 degrees C to 0.02 mg/mL at 18 degrees C. The van't Hoff plot of the apparent equilibrium constant for microtubule elongation at temperatures between 0 and 18 degrees C was linear and gave a standard enthalpy change (delta H degree) of +26.9 kcal/mol and a standard entropy change (delta S degree) of +123 eu. At 10 degrees C, tubulin from N. gibberifrons polymerized efficiently at high ionic strength; the critical concentration increased monotonically from 0.041 to 0.34 mg/mL as the concentration of NaCl added to the assembly buffer was increased from 0 to 0.4 M. Together, the results indicate that the polymerization of tubulins from the Antarctic fishes is entropically driven and suggest that an increased reliance on hydrophobic interactions underlies the energetics of microtubule formation at low temperatures. Thus, evolutionary modification to increase the proportion of hydrophobic interactions (relative to other bond types) at sites of interdimer contact may be one adaptive mechanism that enables the tubulins of cold-living poikilotherms to polymerize efficiently at low temperatures.

Animals↗