Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “interfacial characterization”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40Linked to original sources
PubMed2006

Effects of protein composition and enzymatic activity on formation and properties of potato protein stabilized emulsions.

In the present study emulsions were made with various potato protein preparations, which varied in protease inhibitor and patatin content. These emulsions were characterized with respect to average droplet size, plateau surface excess, and the occurrence of droplet aggregation. Droplet aggregation occurred only with potato protein preparations that contained a substantial amount of protease inhibitors and could be prevented only at pH 3. The average droplet size of the emulsions made with potato proteins appeared to be related to the patatin content of the preparation used. Average droplet size was found to be dominated by the patatin-catalyzed lipolytic release of surface active fatty acids and monoglycerides from the tricaprylin oil phase during the emulsification process. Addition of monoglycerides and especially fatty acids, at concentrations representative of those during emulsification, was shown to cause a stronger and much faster decrease of the interfacial tension than that with protein alone and to result in a drastic decrease in droplet size. The patatin used was shown to have a lipolytic activity of 820 units/g with emulsified tricaprylin as the substrate. Because of the droplet aggregating properties of the protease inhibitors, the patatin-rich potato preparations seem to be the most promising for food emulsion applications over a broad pH range, provided the lipolytic activity can be diminished or circumvented.

Caprylates↗
PubMed2004

Electron spectroscopy and scanning tunneling microscopy study of quasi-two-dimensional freezing at the liquid/vapor interface of Ga-Bi alloys.

We have studied the interfacial characteristics of Ga-rich liquid Ga-Bi alloys at various compositions and temperatures up to 300 degrees C by different electron spectroscopies under ultrahigh vacuum conditions. In particular, the thickness and thickness profiles of Bi-rich wetting and surface freezing films have been measured. It is found that at the surface freezing transition the Bi film thickness jumps from approximately 5 A to macroscopic values of over 100 A. This distinct behavior is discussed in comparison with the results in Ga-Pb. In addition, we report first scanning tunneling microscopy observations of the surface structure of a solidified Ga(0.989)Bi(0.011) alloy after passing a surface freezing transition. The topology at room temperature is characterized by extended, atomically flat Bi terraces covered by nanosized triangular two-dimensional Bi islands.

Journal Article↗
PubMed2002

Production, isolation and characterization of a sterol esterase from Ophiostoma piceae.

We studied extracellular sterol esterase production by the ascomycete Ophiostoma piceae in liquid culture. Esterase activity was found in low levels in glucose medium but it was strongly induced by olive oil. An esterase was purified from the 0.5% olive oil-supplemented cultures using ultrafiltration followed by a single chromatographic step on a hydrophobic interaction column. The enzyme was a glycoprotein with 8% N-linked carbohydrate content, a molecular mass by SDS/PAGE around 56.5 kDa and an isoelectric point of 3.3. Its N-terminal sequence was TTVNVKYPEGEVV. Substrate specificity studies showed that the O. piceae esterase hydrolyzes p-nitrophenol esters, tributyrin, triolein and different cholesterol esters. Both affinity (Km) and catalytic constant (k(cat)) were positively affected by the length of the fatty acid esterifying glycerol and cholesterol. The presence of double bonds in the acyl chain increased the enzyme efficiency, although it affected the k(cat) values rather than the Km on the cholesterol esters. The O. piceae enzyme showed no interfacial activation. This enzyme could have biotechnological applications in paper manufacturing since it efficiently hydrolyzes both triglycerides and sterol esters, which form pitch deposits during manufacturing of softwood and hardwood paper pulps, respectively.

Ascomycota↗
PubMed1996

Specificity for the exchange of phospholipids through polymyxin B mediated intermembrane molecular contacts.

Structural specificity for the direct vesicle-vesicle exchange of phospholipids through stable molecular contacts formed by the antibiotic polymyxin B (PxB) is characterized by kinetic and spectroscopic methods. As shown elsewhere [Cajal, Y., Rogers, J., Berg, O.G., & Jain, M.K. (1996) Biochemistry 35, 299-308], intermembrane molecular contacts between anionic vesicles are formed by a small number of PxB molecules, which suggests that a stoichiometric complex may be responsible for the exchange of phospholipids. Larger clusters containing several vesicles are formed where each vesicle can make multiple contacts if sterically allowed. In this paper we show that the overall process can be dissected into three functional steps: binding of PxB to vesicles, formation of stable vesicle-vesicle contacts, and exchange of phospholipids. Polycationic PxB binds to anionic vesicles. Formation of molecular contacts and exchange of monoanionic phospholipids through PxB contacts does not depend on the chain length of the phospholipid. Only monoanionic phospholipids (with methanol, serine, glycol, butanol, or phosphatidylglycerol as the second phosphodiester substituent in the head group) exchange through these contacts, whereas dianionic phosphatidic acid does not. Selectivity for the exchange was also determined with covesicles of phosphatidylmethanol and other phospholipids. PxB does not bind to vesicles of zwitterionic phosphatidylcholine, and its exchange of covesicles is not mediated by PxB. Vesicles of dianionic phospholipids, like phosphatidic acid, bind PxB; however, this phospholipid does not exchange. The structural features of the contacts are characterized by the spectroscopic and chemical properties of PxB at the interface. PxB in intermembrane contacts is readily accessible from the aqueous phase to quenchers and reagents that modify amino groups. Results show that PxB at the interface can exist in two forms depending on the lipid/PxB ratio. Additional studies show that the stable PxB-mediated vesicle-vesicle contacts may be structurally and functionally distinct from "stalks", the putative transient intermediate for membrane fusion. The phenomenon of selective exchange of phospholipids through peptide-mediated contacts could serve as a prototype for intermembrane targeting and sorting of phospholipids during their biosynthesis trafficking in different compartments of a cell. The protocols and results described here also extend the syllogistic foundation in interfacial equilibria and catalysis.

Amino Acid Sequence↗
PubMed1998

Spray-drying of air-liquid interface sensitive recombinant human growth hormone.

Spray-drying is an attractive method for preparing fine recombinant human growth hormone (rhGH) powders if the detrimental effect of protein degradation at the air-liquid interface on the protein can be minimized. In this study, we demonstrated that rhGH degradation (insoluble and soluble aggregate formation), as the consequence of air-liquid interfacial degradation, could be prevented using the appropriate formulation. Adding polysorbate-20 surfactant into the liquid feed (with no presence of sugar protectant) significantly reduced the formation of insoluble protein aggregates, while adding the divalent metal zinc ion effectively suppressed the formation of soluble protein aggregates. The combination of the two yielded a spray-dried rhGH powder having insignificant protein degradation. Our data suggest that the two components might protect the protein through different mechanisms. Polysorbate molecules occupy the air-liquid interface of spray droplets, thereby reducing the chance for rhGH to form insoluble aggregates by surface denaturation. Two zinc ions associate with two rhGH molecules to form a dimer complex that can resist the formation of soluble protein aggregates. Characterization of spray-dried powders by scanning electron microscopy suggests that both formulation and drying conditions have a strong influence on particle morphology and shape. Overall, spherical rhGH powders of smooth surface and good biochemical quality can be prepared by spray-drying using this formulation with no addition of sugar protectant.

Calorimetry, Differential Scanning↗
PubMed2004

Selective reductive desorption of a SAM-coated gold electrode revealed using fluorescence microscopy.

The reductive desorption of a self-assembled monolayer (SAM) of a fluorescent thiol molecule (BodipyC10SH) from Au was characterized using electrochemistry and epi-fluorescence microscopy. Molecular luminescence is quenched near a metal surface, so fluorescence was only observed for molecules reductively desorbed and then separated from the electrode surface. Fluorescence imaging showed that reductive desorption was selective, with desorption occurring from different regions of the Au electrode depending on the extent of the negative potential excursion. When desorbed, the molecules were sufficiently mobile, diffusing away from the electrode surface, thereby preventing oxidative readsorption. At sufficiently negative desorption potentials, all of the thiol was desorbed from the electrode surface, resulting in fluorescence at the air/solution interface. The selective removal of the thiol monolayer from distinct regions was correlated to features on the electrode surface and was explained through potential-dependent interfacial energies. This in situ electrofluorescence microscopy technique may be useful in sensor development.

Journal Article↗
PubMed1997

Disrupting the hydrophobic patches at the antibody variable/constant domain interface: improved in vivo folding and physical characterization of an engineered scFv fragment.

By constructing Fv and single-chain Fv (scFv) fragments of antibodies, the variable domains are taken out of their natural context in the Fab fragment, where they are associated with the constant domains of the light (CL) and heavy chain (CH1). As a consequence, all residues of the former variable/constant domain interface become solvent exposed. In an analysis of 30 non-redundant Fab structures it was found that at the former variable/constant domain interface of the Fv fragment the frequency of exposed hydrophobic residues is much higher than in the rest of the Fv fragment surface. We investigated the importance of these residues for different properties such as folding in vivo and in vitro, thermodynamic stability, solubility of the native protein and antigen affinity. The experimental model system was the scFv fragment of the anti-fluorescein antibody 4-4-20, of which only 2% is native when expressed in the periplasm of Escherichia coli. To improve its in vivo folding, a mutagenesis study of three newly exposed interfacial residues in various combinations was carried out. The replacement of one of the residues (V84D in VH) led to a 25-fold increase of the functional periplasmic expression yield of the scFv fragment of the antibody 4-4-20. With the purified scFv fragment it was shown that the thermodynamic stability and the antigen binding constant are not influenced by these mutations, but the rate of the thermally induced aggregation reaction is decreased. Only a minor effect on the solubility of the native protein was observed, demonstrating that the mutations prevent aggregation during folding and not of the native protein. Since the construction of all scFv fragments leads to the exposure of these residues at the former variable/constant domain interface, this strategy should be generally applicable for improving the in vivo folding of scFv fragments and, by analogy, also the in vivo folding of other engineered protein domains.

Amino Acid Sequence↗
PubMed2003

Fatigue crack propagation path across the dentinoenamel junction complex in human teeth.

The human tooth structures should be understood clearly to improve clinically used restorative materials. The dentinoenamel junction (DEJ) plays a key role in resisting crack propagation in teeth. The aim of this study was to determine the fracture toughness of the enamel-DEJ-dentin complex and to investigate the influence of the DEJ on the fatigue crack propagation path across it by characterizing fatigue-fractured enamel-DEJ-dentin complexes using optical and scanning electron microscopy. The results of this study showed that the fracture toughness of the enamel-DEJ-dentin complex was 1.50 +/- 0.28 Mpa x m(1/2). Based on the results of this investigation, it was concluded that the DEJ complex played a critical role in resisting crack propagation from enamel into dentin. The DEJ complex is, approximately, a 100 to 150 microm broad region at the interface between enamel and dentin. The toughening mechanism of the DEJ complex may be explained by the fact that crack paths were deflected as cracks propagated across it. Understanding the mechanism of crack deflection could help in improving dentin-composite as well as ceramic-cement interfacial qualities with the aim to decrease the risk of clinical failure of restorations. Both can be viewed as being composed from a layer of material of high strength and hardness bonded to a softer but tougher substratum (dentin). The bonding agent or the luting cement layer may play the critical role of the DEJ in improving the strength of these restorations in clinical situations.

Dental Enamel↗
PubMed2000

A polar, solvent-exposed residue can be essential for native protein structure.

BACKGROUND: A large energy gap between the native state and the non-native folded states is required for folding into a unique three-dimensional structure. The features that define this energy gap are not well understood, but can be addressed using de novo protein design. Previously, alpha(2)D, a dimeric four-helix bundle, was designed and shown to adopt a native-like conformation. The high-resolution solution structure revealed that this protein adopted a bisecting U motif. Glu7, a solvent-exposed residue that adopts many conformations in solution, might be involved in defining the unique three-dimensional structure of alpha(2)D. RESULTS: A variety of hydrophobic and polar residues were substituted for Glu7 and the dynamic and thermodynamic properties of the resulting proteins were characterized by analytical ultracentrifugation, circular dichroism spectroscopy, and nuclear magnetic resonance spectroscopy. The majority of substitutions at this solvent-exposed position had little affect on the ability to fold into a dimeric four-helix bundle. The ability to adopt a unique conformation, however, was profoundly modulated by the residue at this position despite the similar free energies of folding of each variant. CONCLUSIONS: Although Glu7 is not involved directly in stabilizing the native state of alpha(2)D, it is involved indirectly in specifying the observed fold by modulating the energy gap between the native state and the non-native folded states. These results provide experimental support for hypothetical models arising from lattice simulations of protein folding, and underscore the importance of polar interfacial residues in defining the native conformations of proteins.

Dimerization↗
PubMed2002

Expression and characterization of Ca(2+)-independent lipase from Bacillus pumilus B26.

A lipase-producing Bacillus pumilus strain (B26) was isolated from a soil sample collected in Korea. The cloned gene showed that the lipase B26 composed of a 34-amino-acid signal sequence and a 181-amino-acid mature part corresponding to a molecular mass (M(r)) of 19,225. Based on the M(r) and the protein sequence, the lipase B26 belongs to the lipase family I.4. The optimum temperature and pH of the purified enzyme were 35 degrees C and 8.5, respectively. The lipase B26 showed a 'Ca(2+)-independent thermostability and catalytic activity'. These are novel properties observed for the first time in lipase B26 among all bacterial lipases and correspond with the suggestion that this enzyme had no Ca(2+)-binding motif around the catalytic His156 residue. This enzyme seems to be a true lipase based on the experimental results that it could hydrolyze various long-chain triglycerides (C(14)-C(18)) and triolein (C(18:1)) and that it showed a typical interfacial activation mechanism toward both tripropionin and p-nitrophenyl butyrate.

Amino Acid Sequence↗
PubMed1988

Solute partitioning into lipid bilayer membranes.

We have measured the membrane/water partition coefficients of benzene into lipid bilayers as a function of the surface density of the phospholipid chains. A simple 2H NMR method was used for the measurement of surface densities; it is shown to give results similar to those obtained from more demanding X-ray diffraction measurements. We observe that benzene partitioning into the bilayer is dependent not only on the partitioning chemistry, characterized by the oil/water partition coefficient, but also on the surface density of the bilayer chains. Increasing surface density leads to solute exclusion: benzene partitioning decreases by an order of magnitude as the surface density increases from 50% to 90% of its maximum value, a range readily accessible in bilayers and biomembranes under physiological conditions. This effect is independent of the nature of the agent used to alter surface density: temperature, cholesterol, and phospholipid chain length were tested here. These observations support the recent statistical thermodynamic theory of solute partitioning into chain molecule interphases, which predicts that the expulsion of solute is due to entropic effects of the orientational ordering among the phospholipid chains. We conclude that the partitioning of solutes into bilayer membranes, which are interfacial phases, is of a fundamentally different nature than partitioning into bulk oil and octanol phases.

Benzene↗
PubMed2000

Detection of the metastable rippled gel phase in hydrated phosphatidylcholine by fluorescence spectroscopy.

Steady-state and time-resolved emission spectroscopy of 1-anilinonaphthalene-8-sulfonic acid (ANS) have been used for characterization of the metastable rippled gel phase, Pbeta'(mst), formed in fully-hydrated dipalmitoylphosphatidylcholine (DPPC) upon cooling from the liquid crystalline phase Lalpha [Tenchov et al., Biophys. J. 56 (1989) 757]. The Pbeta'(mst) phase of DPPC clearly differs from the stable Pbeta' phase by increased (approximately 27%) ANS emission intensity, by enhanced (approximately 23%) average radiative rate constant, and by reduced (approximately 18%) non-radiative quenching rate constant. The fluorescence intensity peak at the Pbeta'-->Lalpha transition temperature is replaced by a large, reversible stepwise intensity drop at the Pbeta'(mst)-->Lalpha transition. No such effects have been found for dimiristoylphosphatidylcholine (DMPC) dispersions confirming previous results that DMPC does not form a Pbeta'(mst) phase. Since ANS is known to predominantly reside in the interfacial region, the observed effects indicate differences between the stable and metastable rippled phases in the organization and dynamics of their lipid/water interfaces. The data demonstrate that the metastable rippled phase manifests its appearance also through interactions with small molecules (ANS size approximately 8 A).

1,2-Dipalmitoylphosphatidylcholine↗
PubMed2006

Perfluorobutane sulfonic acid hydration and interactions with O2 adsorbed on Pt3.

The side chain of NAFION, a proton conductive membrane used as electrolyte in low-temperature fuel cells, is modeled with perfluorobutane sulfonic acid. Density functional theory is used to characterize structures and energetics of hydration of the model system interacting with a proton solvated with up to 24 water molecules and analyze interactions of some of these hydrated complexes with O(2) adsorbed on Pt(3). It is found that at least three water molecules are needed to ionize the sulfonic acid, and higher degrees of hydration induce the formation of cages where the water molecules are held together via complex hydrogen-bond networks. The interaction between the complex formed by the ionized acid and the hydrated proton, in contact with a bridge-adsorbed O(2)-Pt(3), promotes the protonation of the adsorbed O(2). Upon protonation, the O(2)-Pt(3) system evolves from hydrophobic to hydrophilic behavior, which may facilitate further interfacial contact.

Journal Article↗
PubMed2006

Microfluidic approach for rapid multicomponent interfacial tensiometry.

We report a microfluidic instrument to rapidly measure the interfacial tension of multi-component immiscible liquids. The measurement principle rests upon the deformation and retraction dynamics of drops under extensional flow and was implemented for the first time in microfluidics (S. D. Hudson et al., Appl. Phys. Lett., 2005, 87, 081905 (ref. )). Here we describe in detail the instrument design and physics and extend this principle to investigate multicomponent mixtures, specifically two-component drops of adjustable composition. This approach provides fast real-time sigma measurements (on the order of 1 s), the possibility of rapidly adjusting drop composition and utilizes small sample volumes (approximately 10 microL). The tensiometer operation is illustrated with water drops and binary drops (water/ethylene glycol mixtures) in silicone oils. The technique should be particularly valuable for high-throughput characterization of complex fluids.

Equipment Design↗
PubMed1999

Theoretical and Experimental Study of the Voltage-Current Characteristic of an Asymmetric Cellulose Acetate Membrane.

The voltage-current characteristic of an asymmetric cellulose acetate (KP96) membrane in NaCl solutions (0.005-0.1 M) has been studied both experimentally and theoretically. The theoretical analysis was carried out within the context of a bilayer model, thereby taking into account ion transport across the interfaces of the active layer and the effect of concentration polarization at the selective layer/nonselective layer boundary. The transport process was treated mathematically by applying the Nernst-Planck-Poisson equations. Image forces affecting ion transport across the surfaces of the active layer have been incorporated into the theoretical description by means of a mathematical simulation of the profile of the image force potential. Most of the parameters characterizing the model membrane were estimated from literature data, from the known value of the final rejection coefficient of an asymmetric KP96 cellulose acetate membrane, and from our experimental results on the NaCl concentration dependency of the small-current resistance of an asymmetric KP96 membrane. The thickness of the active layer, however, was considered as an adjustable parameter in our analysis. The theoretical predictions, obtained by numerically solving the Nernst-Planck-Poisson equations, have been compared with the experimental results to obtain insight into the factors underlying the observed nonlinear and asymmetric features of the voltage-current characteristic. For the case of a relatively thick active layer, the nonequilibrium state of the interfaces was also investigated theoretically. Our analysis indicates that ion transport across the interfacial regions of the active layer plays a crucial role in the explanation of the observed phenomena, whereas the influence of concentration polarization in the porous support layer is of minor importance. Copyright 1999 Academic Press.

Journal Article↗
PubMed2004

beta-casein and symmetrical triblock copolymer (PEO-PPO-PEO and PPO-PEO-PPO) surface properties at the air-water interface.

A comparison of beta-casein and symmetrical triblock copolymer (PEO-PPO-PEO and PPO-PEO-PPO) adsorption layer properties at the air-water interface has been carried out by bubble tensiometry and ellipsometry. It has been verified that the equation of state parameters (pi approximately gamma(y)) obtained from surface pressure (pi) and ellipticity in Brewster conditions (rhoB), which is proportional to the surface concentration (gamma) data, are the same as those obtained from dilational modulus epsilon and pi data. These two consistent approaches give further support to the theoretical model of block copolymers which has been previously developed for protein adsorption at fluid interfaces. It is shown that the interfacial behavior of the copolymer adsorption layer changes strongly as a function of the length of the hydrophilic and hydrophobic block sequences. The theoretical model may be used for the interpretation of the adsorption properties of the synthetic copolymers only when the size of the blocks is large enough. In the case of block copolymers, the coil is in a self-avoiding walk conformation (y = 3) whatever the temperature, while in the case of beta-casein, the polypeptide chain is partly collapsed at room temperature due to thermolabile noncovalent bonds. At the end of the first semidilute regime, there is clear evidence for a crossover toward a second semidilute regime for synthetic copolymers as well as for beta-casein but it is presently only partially characterized.

Journal Article↗
PubMed1991

Effects of hydrogen sulfide exposure on surface properties of lung surfactant.

Hydrogen sulfide is an irritant and chemical asphyxiant gas that exerts its primary toxic effects on the respiratory and neurological systems. Exposure to hydrogen sulfide above a threshold value of 200-300 ppm is characterized by the sudden onset of hemorrhagic pulmonary edema. The purpose of this study was to determine whether this response is associated with changes in the surface properties of pulmonary surfactant. Bronchoalveolar lavage fluid was retrieved from the lungs of Fischer 344 rats exposed to two concentrations of hydrogen sulfide or fresh air for 4 h. Surface tension-lowering properties were assayed using a captive bubble surface tensiometer. Lung injury was assessed by histopathology and measurements of total protein and lactate dehydrogenase activity in the lavagate. Marked abnormalities in surfactant activity were demonstrated in the lavagates from rats exposed to the highest concentration (300 ppm) of hydrogen sulfide. These involved the properties of adsorption to the air-water interface and surface tension lowering under quasi-static interfacial compression. Exposure to 200 ppm hydrogen sulfide had no effect on minimum surface tension despite a significant increase in protein and lactate dehydrogenase in the lavagate. This would suggest a threshold-type response for the inhibition of surfactant activity by hydrogen sulfide. In vitro studies using normal rat surfactant showed that the abnormalities in surfactant activity were due to inhibitors in the edema fluid and not to a direct effect of sulfide on surfactant. The pathophysiological consequences of increased alveolar surface tension after hydrogen sulfide exposure may need to be considered in the clinical setting.

Adsorption↗
PubMed1987

Infrared spectroscopic characterization of the structural changes connected with the E1----E2 transition in the Ca2+-ATPase of sarcoplasmic reticulum.

The Ca2+-transporting ATPase (EC 3.6.1.38) of sarcoplasmic reticulum alternates between several conformational states during ATP-dependent Ca2+ transport. The E1 conformation is stabilized by 0.1 mM Ca2+ and the E2 conformation by vanadate in a Ca2+-free medium. Fourier transform infrared spectroscopy reveals significant differences between the two states that indicate differences in the protein secondary structure. The two states and the corresponding spectra can be interconverted reversibly by changing the Ca2+ concentration of the medium. The infrared spectral changes indicate the appearance of a new alpha-helical substructure connected with the E1----E2 conversion accompanied by small changes in beta-turns, while the beta-sheet content remains essentially unchanged. There are also differences between the E1 and E2 states in the C = O stretching vibrations of the ester carbonyl groups of phospholipids in intact sarcoplasmic reticulum that are not observed under identical conditions in isolated sarcoplasmic reticulum lipid dispersions. These observations imply an effect of proteins on the structure of the interfacial regions of the phospholipids that is dependent on the conformational state of the Ca2+-ATPase. The CH2- and CH3-stretching frequencies of the membrane lipids are not affected significantly by the E1----E2 transition. The Fourier transform infrared spectra of sarcoplasmic reticulum vesicles in the presence of 20 mM Ca2+ suggest the stabilization of a protein conformation similar to the E2 state except for differences in the behavior of COO- and phospholipid ester C = O groups that may reflect charge effects of the bound Ca2+.

Animals↗