Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Polyelectrolytes”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40Linked to original sources
PubMed2002

Cascade of coil-globule conformational transitions of single flexible polyelectrolyte molecules in poor solvent.

We show that hydrophobic flexible polyelectrolyte molecules of poly(2-vinylpyridine) and poly(methacryloyloxyethyl dimethylbenzylammonium chloride) are trapped and frozen due to adsorption on the mica surface, and the observed AFM single molecule structures reflect the molecular conformation in solution. An increase of the ionic strength of the solution induces the cascade of abrupt conformational transitions due to the intrachain segregation from elongated coil to compact globule conformations through intermediate pearl necklace-globule conformations with different amounts of beads per chain. The length of the necklaces and the number of beads decrease, while the diameter of beads increases with the increase of ionic strength. Coexistence at the same time of extended coils, necklaces with different amounts of beads, and compact globules indicates the cascade of the first-order-type phase transitions.

Journal Article↗
PubMed2003

Intelligent colloidal hybrids via reversible pH-induced complexation of polyelectrolyte and silica nanoparticles.

We present novel intelligent colloidal polymer/silica nanocomposites, in which the complexation of cationic silica nanoparticles and a weak anionic polyelectrolyte can be manipulated simply by pH change through a hydrogen-bonding interaction and ionic complexation caused by hydrogen-transfer interactions between the constituents. Special silica particles which have nanometer size (diameter approximately 3.0 nm) and two independent proton-accepting sites were developed in this study. Both the silica and poly(acrylic acid) form transparent colloidal solutions in water, while a white turbid dispersion was obtained just after mixing the two solutions due to the complexation. The pH-induced association-dissociation behavior was confirmed by the turbidity and potentiometric titration measurements. The assembled structures of the hybrids were visualized by scanning force microscopy.

Acrylic Resins↗
PubMed2003

Competitive reactions in solutions of poly-L-histidine, calf thymus DNA, and synthetic polyanions: determining the binding constants of polyelectrolytes.

The physicochemical characteristics of a nonviral gene delivery system will govern its functional bioactivity; however, empiricism dominates the literature in this field, and a significant deficiency of quantitative investigation and evaluation of nonviral gene delivery vehicles remains. Herein, we derive a physical model and experimental method to quantitatively determine the binding constants between a model polycationic nonviral gene delivery vehicle poly-L-histidine (PLH) and calf thymus DNA. The approach has utility to a variety of systems and is not limited to the described polymer model. The interaction of PLH with DNA was monitored by fluorescence quenching of an ethidium bromide probe in the pH range 4 to 8. The interaction increased with pH decrease with the most pronounced change between pH 6 and 7. The obtained pH-dependence of fraction of salt bonds formed between PLH and DNA was used to estimate pK(a) of PLH in the presence of DNA, which equaled 6.24. The interaction of PLH with DNA in the presence of added synthetic polyanions was studied by the same approach and found to be controlled by pH, nature of the charge groups of the polyanion, and its degree of polymerization. In the mixture with sodium poly(styrenesulfonate) the interaction was negligible in the whole studied pH range, whereas in the mixtures with sodium poly(acrylate) (PA) or sodium poly(methacrylate), DNA was able to compete effectively for the binding with PLH. For PA samples with degree of polymerization higher than degree of polymerization of PLH, DP(PA) > DP(PLH), the fraction of polycation bound to DNA was constant regardless of DP(PA.) In contrast, at DP(PA) < DP(PLH), a pronounced increase in the bound fraction was observed. It substantiates the notion that the binding energy of two polymers is mainly controlled by the DP of the shorter component of polyelectrolyte complex. The data on PLH distribution between DNA and added polyanion with different values of DP were treated according to the developed procedure to yield the effective binding constants of PLH with DNA and polyanion-competitor, calculated both per mole of interacting units K(1) and mole of interacting chains K(n). In all cases, K(1) had similar numerical values reflecting common type of interaction stabilizing the complexes, i.e., electrostatics. Slight variation of K(1) yielded in drastic changes in K(n) and alteration of dominance of PLH interaction with DNA or synthetic polyanion. The results of the study can have a high impact in deriving the correlation between the binding constant of a polycation to DNA and its ability to serve as gene delivery vehicle.

Acrylic Resins↗
PubMed2004

Selective depositions on polyelectrolyte multilayers: self-assembled monolayers of m-dPEG acid as molecular template.

This paper describes the fabrication of self-assembled monolayer (SAM) patterns of m-d-poly(ethylene glycol) (m-dPEG) acid molecules onto polyelectrolyte multilayers (PEMs). The patterned SAMs on PEMs were created by ionic interactions using microcontact printing (microCP) technique. The created m-dPEG acid monolayer patterns on PEMs act as resistive templates, and thus further depositions of consecutive poly(anion)/poly(cation) pairs of charged particles result in the formation of three-dimensional (3-D) patterned PEM films or selective particle depositions atop the original multilayer thin films. In this study, we illustrate nonlithographic methods of patterning and controlling 3-D PEM architectures and selective particle depositions. We investigated the effect of variables--the choice of solvent, concentration, pH, substrate pretreatment, and stamp contact times--on microcontact printing of m-dPEG acid molecules onto PEM films to determine the optimal conditions for these parameters to achieve efficient transfer of m-dPEG acid patterns onto PEMs. Among the variables, the pH of the m-dPEG acid ink solution played the most important role in the transfer efficiency of the patterns onto the multilayer films. The patterned films were characterized by optical microscopy and atomic force microscopy (AFM).

Journal Article↗
PubMed2004

Fabrication of polyelectrolyte multilayer films comprising nanoblended layers.

Polyelectrolyte multilayer thin films were prepared via the alternate deposition of poly(allylamine hydrochloride) (PAH) and a blend of poly(acrylic acid) (PAA) and poly(styrenesulfonate) (PSS). When the pH of the blend solution was 3.5, the presence of PAA in this solution significantly increased the total film thickness. With only 10 wt % PAA in the blend adsorption solution, a large increase in film thickness was observed (92 nm cf. 18 nm). It was also demonstrated that the total amount of PSS adsorbed was enhanced by the presence of PAA in the blend solution, showing that the blend solution composition influenced that of the multilayer films. Thin films prepared with nanoblended layers also showed improved pH stability, because they exhibited reduced film rearrangement upon exposure to acidic conditions (pH = 2.5).

Acrylic Resins↗
PubMed2004

Polyelectrolyte multilayer as matrix for electrochemical deposition of gold clusters: toward super-hydrophobic surface.

This communication describes the use of polyelectrolyte multilayer as a preformed matrix in electrochemical deposition to adjust the morphology of gold clusters, and only the surface covered with dendritic gold clusters shows a super-hydrophobic property, with the contact angle above 150 degrees and the tilt angle less than 1.5 degrees , after the surface further chemisorbed with a self-assembled monolayer of n-dodecanethiol.

Journal Article↗
PubMed2005

Inducing spin crossover in metallo-supramolecular polyelectrolytes through an amphiphilic phase transition.

A phase transition in an amphiphilic mesophase is explored to deliberately induce mechanical strain in an assembly of tightly coupled metal ion coordination centers. Melting of the alkyl chains in the amphiphilic mesophase causes distortion of the coordination geometry around the central transition metal ion. As a result, the crystal field splitting of the d-orbital subsets decreases resulting in a spin transition from a low-spin to a high-spin state. The diamagnetic-paramagnetic transition is reversible. This concept is demonstrated in a metallo-supramolecular coordination polyelectrolyte-amphiphile complex self-assembled from ditopic bis-terpyridines, Fe(II) as central transition metal, and dialkyl phosphates as amphiphiles. The magnetic properties are studied in a Langmuir-Blodgett multilayer. The modularity of this concept provides extensive control of structure and function from molecular to macroscopic length scales and gives access to a wide range of new molecular magnetic architectures such as nanostructures, thin films, and liquid crystals.

Journal Article↗
PubMed2004

Controlling primary hepatocyte adhesion and spreading on protein-free polyelectrolyte multilayer films.

The development of new methods for fabricating thin films that provide precise control of the three-dimensional topography and cell adhesion could lead to significant advances in the fields of tissue engineering and biosensors. This Communication describes the successful attachment and spreading of primary hepatocytes on polyelectrolyte multilayer (PEM) films without the use of adhesive proteins such as collagen or fibronectin. We demonstrate that the attachment and spreading of primary hepatocytes can be controlled using this layer-by-layer deposition of ionic polymers. In our study, we used synthetic polymers, namely poly(diallyldimethylammonium chloride) (PDAC) and sulfonated poly(styrene) (SPS) as the polycation and polyanion, respectively, to build the multilayers. Primary hepatocytes attached and spread preferentially on SPS surfaces over PDAC surfaces. SPS patterns were formed on PEM surfaces, either by microcontact printing of SPS onto PDAC surfaces or vice versa, to obtain patterns of primary hepatocytes. PEM is a useful technique for fabricating controlled co-cultures with specified cell-cell and cell-surface interactions on a protein-free environment, thus providing flexibility in designing cell-specific surfaces for tissue engineering applications.

Animals↗
PubMed2004

Amplified quenching of a conjugated polyelectrolyte by cyanine dyes.

The conjugated polyelectrolyte PPESO3 features a poly(phenylene ethynylene) backbone substituted with anionic 3-sulfonatopropyloxy groups. PPESO3 is quenched very efficiently (KSV > 10(6) M(-1)) by cationic energy transfer quenchers in an amplified quenching process. In the present investigation, steady-state and picosecond time-resolved fluorescence spectroscopy are used to examine amplified quenching of PPESO3 by a series of cyanine dyes via singlet-singlet energy transfer. The goal of this work is to understand the mechanism of amplified quenching and to characterize important parameters that govern the amplification process. Steady-state fluorescence quenching of PPESO3 by three cationic oxacarbocyanine dyes in methanol solution shows that the quenching efficiency does not correlate with the Forster radius computed from spectral overlap of the PPESO3 fluorescence with the cyanines' absorption. The quenching efficiency is controlled by the stability of the polymer-dye association complex. When quenching studies are carried out in water where PPESO3 is aggregated, changes observed in the absorption and fluorescence spectra of 1,1',3,3,3',3'-hexamethylindotricarbocyanine iodide (HMIDC) indicate that the polymer templates the formation of a J-aggregate of the dye. The fluorescence dynamics in the PPESO3/HMIDC system were probed by time-resolved upconversion and the results show that PPESO3 to HMIDC energy transfer occurs on two distinctive time scales. At low HMIDC concentration, the dynamics are dominated by an energy transfer pathway with a time scale faster than 4 ps. With increasing HMIDC concentration, an energy pathway with a time scale of 0.1-1 ns is active. The prompt pathway (tau < 4 ps) is attributed to quenching of delocalized PPESO3 excitons created near the HMIDC association site, whereas the slow phase is attributed to intra- and interchain exciton diffusion to the HMIDC.

Journal Article↗
PubMed2004

High-efficiency, environment-friendly electroluminescent polymers with stable high work function metal as a cathode: green- and yellow-emitting conjugated polyfluorene polyelectrolytes and their neutral precursors.

A series of aminoalkyl-substituted polyfluorene copolymers with benzothiadiazole (BTDZ) of different content were synthesized by Suzuki coupling reaction, and their quaternized ammonium polyelectrolyte derivatives were obtained through a postpolymerization treatment on the terminal amino groups. Copolymers are soluble in environmentally friendlier solvents, such as alcohols. It was found that the efficient energy transfer occurs by exciton trapping on the narrow band gap BTDZ site under UV illumination. Only 1% of BTDZ content is needed to completely quench a fluorene emission for both the neutral and the quaternized copolymers in the neat film. Absolute PL efficiencies of copolymer films were greatly enhanced as a result of the suppression of excimer formation. Light-emitting devices fabricated from these copolymers show high external quantum efficiencies over 3% and 1% for the neutral precursor and the quaternized copolymers, respectively, with high work function metals such as Al as a cathode. To the best of our knowledge, this is the first report on an electroluminescent polymer which bears the high EL efficiency, the electron-injection ability from high work function metals, and the solubility in environment-friendly solvents at the same time. These features make them a promising candidate for the next generation of light-emitting copolymers in PLED flat panel display application.

Journal Article↗
PubMed2005

Highly extended conformation of polyelectrolytes incorporated into hybrid threadlike micelles studied by small angle neutron scattering.

SANS measurements revealed that polyelectrolytes, sodium salt of partially sulfonated polystyrenes, incorporated into enormously long hybrid threadlike micelles formed in aqueous solution with a cationic surfactant, cetyltrimethylammonium bromide, have a highly extended conformation with high confinement along the micelles with a radius of 2.3 nm.

Journal Article↗
PubMed2005

Synthesis of two types of nanoparticles in polyelectrolyte capsule nanoreactors and their dual functionality.

Polyelectrolyte multilayer capsule reactors (PEMCRs) for the synthesis of two types of nanoparticles were prepared. The tunable PEMCRs containing two different functional groups that can be used to synthesize two types of nanoparticles simultaneously and to control the composition of two types of nanoparticles within the shell of PEMCs. These PEMCRs enabled the composition as well as the amount of the loaded two types of nanoparticles within the shell of PEMCs to be controlled by the copolymer ratio and the number of reaction cycles. Another interesting finding is that, as a result of the synthesis of two types of nanoparticles, these specially designed PEMCs containing both silver and goethite nanocrystals can be used as antimicrobial capsules, which can move by an external magnetic field. Such a technology has the potential for use in sterilization at the desirable sites.

Journal Article↗
PubMed2006

The role of exciton hopping and direct energy transfer in the efficient quenching of conjugated polyelectrolytes.

The dynamics of fluorescence quenching of a conjugated polyelectrolyte by a cyanine dye are investigated by femtosecond fluorescence up-conversion and polarization resolved transient absorption. The data are analyzed with a model based on the random walk of the exciton within the polymer chain and a long-range direct energy transfer between polymer and dye. We find that rapid intrachain energy migration toward complex sites with the dye leads to the highly efficient energy transfer, whereas the contribution from direct, long-range energy transfer is negligible. We determine the actual density of complexes with the dye along the polymer chain. A clear deviation from calculations based on a constant complex association constant is found and explained by a reduced effective polymer concentration due to aggregation. Altogether, the quenching efficiency is found to be limited by (i) the energetic disorder within the polymer chain and (ii) the formation of loose polymer aggregates.

Adsorption↗
PubMed2006

Charging behavior of single-stranded DNA polyelectrolyte brushes.

DNA monolayers are widely used in fundamental and applied genomics and are versatile experimental models for elucidating the behavior of charged polymers at interfaces. The physical behavior of these systems is to a large extent governed by their internal ionic microenvironment, which is investigated here for layers of end-tethered, single-stranded DNA oligonucleotides (DNA brushes). Retention of counterions by the DNA brush manifests as lowered susceptibility of the interfacial capacitance to external salt conditions. A physical model based on concepts adapted from polymer science was used to further elucidate the connection between monolayer organization and its charging behavior. The data indicate a reorganization of the monolayer with changes in ionic strength and strand coverage that is consistent with that expected for a polyelectrolyte brush. A method for electrochemical quantification of strand coverage, based on shift of reduction potential for redox counterions associated with the DNA monolayer, is also described. These results provide guidance for development of label-free electrochemical diagnostics employing DNA monolayers and formulate a description of monolayer behavior within a polymer science framework.

DNA, Single-Stranded↗
PubMed2006

Quadruplex-to-duplex transition of G-rich oligonucleotides probed by cationic water-soluble conjugated polyelectrolytes.

G-quartet DNA converts to duplex form in the presence of its complementary strand. This conformational change can be detected in real time by a homogeneous assay method based on the signal amplification of conjugated polyelectrolytes and the specific interaction of intercalating dyes with double-stranded DNA (dsDNA). The probe solution contains a cationic, conjugated polymer (CCP), G-quadruplex labeled with a fluorescein at the 5'-terminus (G-quadruplex-Fl), and ethidium bromide (EB). The addition of a complementary target results in the transition from G-quadruplex to duplex (dsDNA-Fl) and EB intercalation within the duplex structure. Excitation of the CCP leads to energy transfer from CCP to dsDNA-Fl (FRET-1) and then energy transfer from dsDNA-Fl to EB (FRET-2). Increasing the number of mismatched bases discourages dsDNA formation, which is detected in the assay.

Cations↗
PubMed2006

Highly reversible and multi-stage cantilever actuation driven by polyelectrolyte brushes.

Microcantilever bending can be reversibly driven by conformational changes of phosphate containing polyelectrolyte brushes when exposed to different pH or salt solutions. The deflection of the cantilevers allows a detailed analysis of the properties of polymer brushes, while these systems are also a first step toward polymer-based nanoactuators.

Journal Article↗
PubMed2006

pH-induced hysteretic gating of track-etched polycarbonate membranes: swelling/deswelling behavior of polyelectrolyte multilayers in confined geometry.

pH-induced hysteretic gating of track-etched polycarbonate membranes (TEPC) has been achieved by depositing layer-by-layer assembled polyelectrolyte multilayers comprising poly(allylamine hydrochloride) (PAH) and poly(sodium 4-styrenesulfonate) (PSS) at a high pH condition (pH > 9.0). Scanning electron microscopy and transmission electron microscopy showed that the average bilayer thickness of multilayers was greater within the cylindrical pores of track-etched polycarbonate membranes compared to the multilayers on planar substrates (e.g., Si wafers and the face of TEPC membranes). Swelling/deswelling properties of multilayers and gating properties of the multilayer-modified TEPC membranes were studied by measuring the flux of pH-adjusted deionized water. Large discontinuous changes in the transmembrane flux were observed, indicating that the multilayers within the cylindrical pores of TEPC membranes exhibit the discontinuous swelling/deswelling behavior observed previously for planar systems. The degree of swelling as estimated by simple models, however, showed that (PAH/PSS) multilayers in the confined geometry swelled to smaller extents compared to the same multilayers on planar substrates under the same conditions. Multilayer-modified membranes showed reversible gating properties as the pH condition of feed solution was alternated between pH 2.5 and 10.5. In situ atomic force microscopy (AFM) was used to visualize the closing of the pores as a function of time. The hysteretic gating property of the multilayer-modified TEPC membrane was utilized to achieve either a "closed" or "open" state at one pH condition depending on the pretreatment history, thereby enabling either the retention or passage of high-molecular weight polymers by varying the membrane pretreatment condition.

Journal Article↗
PubMed2006

Cellular immobilization within microfluidic microenvironments: dielectrophoresis with polyelectrolyte multilayers.

The development of biomimetic microenvironments will improve cell culture techniques by enabling in vitro cell cultures that mimic in vivo behavior; however, experimental control over attachment, cellular position, or intercellular distances within such microenvironments remains challenging. We report here the rapid and controllable immobilization of suspended mammalian cells within microfabricated environments using a combination of electronic (dielectrophoresis, DEP) and chemical (polyelectrolyte multilayers, PEMS) forces. While cellular position within the microsystem is rapidly patterned via intermittent DEP trapping, persistent adhesion after removal of electronic forces is enabled by surface treatment with PEMS that are amenable to cellular attachment. In contrast to DEP trapping alone, persistent adhesion enables the soluble microenvironment to be systematically varied, facilitating the use of soluble probes of cell state and enabling cellular characterization in response to various soluble stimuli.

Animals↗