Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Microspheres”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40Linked to original sources
PubMedDate not supplied

Preparation and characterization of hCG-loaded polylactide or poly(lactide-co-glycolide) microspheres using a modified water-in-oil-in-water (w/o/w) emulsion solvent evaporation technique.

A modified w/o/w emulsion solvent evaporation technique was adopted to prepare human Chorionic Gonadotropin (hCG)-loaded polylactide (PLA) or poly(lactide-co-glycolide) (PLGA) microspheres. The effects of preparative parameters, such as stirring rate, polymer MW and concentration, and the composition of both the inner aqueous phase and oil phase etc., on hCG entrapment efficiency and microsphere characteristics were investigated. It was found that by adding 20% glycerol into the inner aqueous phase and 40% acetone into the oil phase, smooth microspheres approximately 1 microm in diameter could be produced with high hCG entrapment efficiency (>90%). In vitro release test showed a burst release of hCG from PLGA (75:25) microspheres, followed by sustained release of 55% hCG over 2 months. The initial hCG burst from PLGA microspheres increased with the glycerol concentration in the inner aqueous phase, but decreased to a low value (ca. 20%) with the addition of acetone into the oil phase, which could be attributed to the associated changes in surface morphology of the microspheres. In vivo experiments demonstrated that a single shot of hCG-loaded PLGA microspheres could produce a comparable antibody response with the inoculation of free hCG four times.

Acetone↗
PubMedDate not supplied

Release characteristics of microspheres prepared by co-spray drying Actinobacillus pleuropneumoniae antigens and aqueous ethyl-cellulose dispersion.

Using formalin inactivated Actinobacillus pleuropneumoniae antigens and aqueous ethylcellulose dispersions, microspheres of oral vaccines were developed by a co-spray drying process. The present study attempted to determine whether the dosage formulations of microspheres could form enteric matrices. To assess the enteric characteristics, an in vitro dissolution test was performed with the AQ6-AP microspheres; 95% of the A. pleuropneumoniae protein was released within 3 h at pH 7, but there was no release at pH 1.5. The scanning microscopy revealed that the surface structure of AQ6-AP microspheres became porous at neutral pH. The SDS-PAGE analysis showed that the release rate of proteins from the microspheres was pH dependent not only for the AQ6-AP formulation but also when antigens of A. pleuropneumoniae were replaced with porcine serum. The results suggest that the A. pleuropneumoniae antigens were entrapped in the AQ6 microspheres under the acidic conditions. In a mouse model, oral immunization with AQ6-AP microspheres containing A. pleuropneumoniae evoked systemic IgG and mucosal IgA responses against A. pleuropneumoniae antigens. Thus, the present method may further provide an opportunity to develop oral vaccines and mucosal immunity.

Actinobacillus Infections↗
PubMedDate not supplied

Release of bovine serum albumin from preformed porous microspheres of poly(L-lactic acid).

Preformed porous microspheres of poly(L-lactic acid) (Accurel have been shown to sustain the release of highly water soluble solutes, like dextran and mannitol, for a time period of more than 4 months. The purpose of this investigation was to mechanistically characterize the release of a model protein, bovine serum albumin (BSA), from these highly porous microspheres. The microspheres were loaded with [14C]BSA in three different concentrations of 0.06, 0.26 and 0.59% w/w. The rate of release of [14C]BSA from microspheres was correlated to media ([3H]PBS) uptake. The release of BSA showed a biphasic pattern; an initial rapid release, followed by a sustained release. The initial burst of BSA was found to be inversely proportional to BSA loading and highly correlated to water penetration. The sustained release phase was independent of water penetration kinetics. Washing the microspheres did not remove either the surface bound BSA or the BSA incorporated in the microsphere matrix, indicating the tight binding of BSA to highly porous microspheres. Furthermore, addition of a surfactant induced a dramatic increase in the amount of BSA released, suggesting that the release is controlled by the surface binding of BSA to the polymer. Also, the release rate of BSA beyond the initial burst was found to be much slower than for the lower MW macromolecules like dextran at a similar level. The data from the present work suggests the BSA-polymer interaction to be a major contributing factor in explaining the overall BSA release kinetics.

Animals↗
PubMedDate not supplied

In vitro degradation and dissolution behaviours of microspheres prepared by three low molecular weight polyesters.

Three low-molecular weight polyesters, poly(L-lactic acid) (PLA), copoly(lactic acid/glycolic acid) (PLGA) and poly(delta-valerolactone) (PV), were used to prepare water-soluble sodium diclofenac-loaded microspheres by using the oil-in-oil (o/o) emulsification-solvent evaporation method. Their micromeritic and physicochemical properties, and degradation and dissolution behaviours were determined in vitro. The results indicate that high encapsulation efficiency and better monodispersity might be achieved by the o/o emulsification-solvent evaporation method, depending on the amount of drug loading used. The slower evaporation of organic solvent from the system during microencapsulation seemed to modify the crystallinity of drug and polyester in the microspheres, determined by powder x-ray diffractometry and differential scanning calorimetry. The in vitro degradation rate of all the microspheres in pH7.4 phosphate buffer solution showed first-order kinetics and ranked in the order of PLGA > PLA > PV microspheres. Furthermore, the first-order release rate was also found in all the microspheres after an initial drug burst and ranked in the order of PLGA> PLA > PV microspheres, too. The relationship between degradation and dissolution behaviours of these microspheres is discussed.

Biodegradation, Environmental↗
PubMedDate not supplied

5-Fluorouracil-loaded chitosan coated polylactic acid microspheres as biodegradable drug carriers for cerebral tumours.

The development of injectable microspheres for anticancer drug delivery into the brain is a major challenge. The possibility of entrapping 5-fluorouracil (5-FU) in chitosan coated monodisperse biodegradable microspheres with a mean diameter of 10-25 um was demonstrated. An emulsion of 5-FU (in water) and polylactic acid (PLA) dissolved in acetone-dichloromethane mixture was poured into an aqueous solution of chitosan (or poly-vinyl alcohol) with stirring using a high-speed homogenizer, for the formation of microspheres. 5-FU recovery in microspheres ranged from 44-66% depending on the polymer and emulsification systems used for the preparation. Scanning electron microscopy revealed that the chitosan coated microspheres had less surface micropores compared to PVA based preparations. The drug release behaviour from microspheres suspended in phosphate buffered saline exhibited a biphasic pattern. The amount of drug release was much higher initially (approximately 25%), followed by a constant slow release profile for a 30 days period of study. This chitosan coated PLA/PLGA microsphere formulation may have potential for the targeted delivery of 5-FU to treat cerebral tumours.

Antimetabolites, Antineoplastic↗
PubMedDate not supplied

Ethyl acetate as a dispersing solvent in the production of poly(DL-lactide-co-glycolide) microspheres: effect of process parameters and polymer type.

This study deals with the production of poly(DL-lactide-co-glycolide) (PLGA) microspheres using ethyl acetate as a dispersing solvent, a partially water soluble and less toxic solvent, by using emulsification and solvent diffusion/ evaporation techniques. PLGA 50 : 50 was used, having molecular weights, 12000 and 34000 with the end group capped (RG502, 503) and uncapped (RG502H, 503H) biodegradable polymers. The microspheres were loaded with nifedipine (NFD) as a model drug. Solvent removal from the embryonic microspheres was manipulated by adopting different techniques. These methods have shown a significant effect on the physicochemical and release characteristics of the microspheres. Rapid removal of the solvent resulted in microspheres with a loose matrix and large size. Use of higher molecular weight polymers increased the size of the microspheres as well as delayed release of the drug. The uncapped polymer has given a higher rate of diffusion when compared to the capped polymers. Thermal analyses showed a uniform molecular distribution of the drug in the polymer matrix. The mechanism of drug release from the PLGA microspheres followed the Fickian diffusion.

Acetates↗
PubMed2004

Effects of the permeability characteristics of different polymethacrylates on the pharmaceutical characteristics of verapamil hyhdrochloride-loaded microspheres.

Microspheres containing verapamil hydrochloride (VRP) were prepared with various polymethacrylates, with different permeability characteristics (Eudragit RS 100, Eudragit RL 100, Eudragit L 100 and Eudragit L 100-55) and also with mixtures of these polymers in a 1:1 ratio using the solvent evaporation method. The aim was to investigate the effects of the permeability of the polymers on drug release rates and the characteristics of the microspheres. To achieve these aims, yield, incorporation efficiency, particle size and the distribution of microspheres were determined, and the influence of the inner phase viscosities prepared with different polymer and polymer mixtures on particle size and the distribution of microspheres were evaluated. Surface morphologies of microspheres were observed by scanning electron microscope. Drug release rates from microspheres were determined by the half-change method using a flow-through cell. The results indicate that microspheres with different surface morphologies and statistically different yields and incorporation efficiencies could be prepared and their particle size and distribution xariances resulted from the viscosity of the inner phase. Dissolution profiles showed that the drug release rate could be modified depending on the permeability characteristics of polymethacrylates.

Acrylic Resins↗
PubMed2004

Biodegradable microspheres of ketorolac tromethamine for parenteral administration.

Ketorolac tromethamine loaded microspheres were prepared using two different polyesters, namely poly (lactic acid) and poly (glycolic acid) by solvent evaporation technique. The morphology of microspheres was analysed by scanning electron microscopy. In vitro release profiles of these microspheres were studied in phosphate buffered saline pH 7.4. The release kinetics of ketorolac tromethamine from the microspheres was evaluated by fitting the release data to the zero-order, Higuchi and korsemeyer-peppas equations. All microspheres showed initial burst release, followed by fickian diffusion of drug through microspheres. These microspheres were formulated as parenterals to have controlled release system.

Biodegradation, Environmental↗
PubMed2004

Effects of alginate coated on PLGA microspheres for delivery tetracycline hydrochloride to periodontal pockets.

The effects of alginate coated on tetracycline (Tc) loaded poly (D, L-lactic-co-glycolic acid) (PLGA) microspheres fabricated by double emulsion solvent evaporation technique for local delivery to periodontal pocket were investigated. Alginate coated PLGA microspheres showed smoother surface but enlarged their particle sizes compared with those of uncoated ones. In addition, alginate coated microspheres enhanced Tc encapsulation efficiency (E.E.) from 11.5 +/- 0.5% of uncoated ones to 17.9 +/- 0.5%. Moreover, all of the coated PLGA microspheres even fabricated at different conditions could prolong Tc release from 9-12 days with 50% or higher in cumulative release of Tc compared with those of uncoated ones. The swelling ratios of PLGA microspheres for alginate coated or uncoated ones, one of the possible mechanisms for enhancing Tc release for the coated ones, were measured. The results showed that 20% or higher in swelling ratio for the coated microspheres at the earlier stage of hydration (e.g. < or = 24 h) could be an important factor to result in high Tc release compared to the uncoated ones. In conclusion, alginate coated Tc loaded PLGA microspheres could enhance Tc delivery to periodontal pocket by enhancing drug encapsulated efficiency, released quantities and sustained release period compared with uncoated ones.

Alginates↗
PubMed2004

On the diameter and size distributions of Bovine Serum Albumin (BSA)-based microspheres.

A fluid mechanics-based correlation for the average size of Bovine Serum Albumin (BSA) microspheres, prepared using a water-in-oil emulsion technique, is presented. The correlation is formulated based on the theory of turbulent dispersion and a non-dimensional Weber number. Measured average diameters of the BSA microspheres prepared in olive oil at different stirring speeds are used to construct the correlation formula. The correlation gives good agreement with experimentally measured average diameters for a wide range of Weber numbers. This correlation is particularly useful to the pharmaceutical industry for predicting the size of encapsulated microspheres used in drug delivery prior to microsphere preparation. The effect of additives on microsphere size was also explored. The average diameter of the BSA microspheres was doubled by the addition of a bioadherent vitelline protein B solution. In addition, a Rosin-Rammler statistical distribution function is shown to accurately represent the microsphere size distribution obtained at different stirring speeds.

Animals↗
PubMed2005

Preparation and characterization of Mitomycin-C loaded chitosan-coated alginate microspheres for chemoembolization.

Mitomycin-C loaded and chitosan-coated alginate microspheres were prepared for use in chemoembolization studies. In this respect, first alginate microspheres were prepared by using a spraying method using an extrusion device with a small orifice and following suspension cross-linking in an oil phase. Chitosan-coating onto the alginate microspheres was achieved by polyionic complex formation between alginate and chitosan. CaCl(2) was used as a cross-linker for alginate microspheres. The obtained chitosan-coated alginate microspheres were spherical shaped and approximately 100-400 microm average size. The microspheres were evaluated based on their swellability and the swelling ratio was changed between 50-280%. CaCl(2) concentration, stirring rate, chitosan molecular weight, chitosan concentration and time for coating with chitosan were selected as the effective parameters on microsphere size and swelling ratio. Equilibrium swellings were achieved in approximately 30 min. On the other hand, chitosan molecular weight, chitosan concentration and time for coating with chitosan were found as the most effective parameters on both drug loading ratio and release studies. Maximum drug loading ratio of 65% was achieved with high molecular weight (HMW) chitosan, highest chitosan concentration (i.e. 1.0% v/v) and shortest time for coating with chitosan (i.e. 1 h) values.

Alginates↗
PubMed2004

In vitro and in vivo properties of usnic acid encapsulated into PLGA-microspheres.

Microparticles will probably play a promising role in the future of chemotherapy. These polymeric delivery systems are capable of maximizing the therapeutic activity while reducing side effects of anti-cancer agents. Usnic acid (UA) is a secondary metabolite produced by lichens, which exhibits an anti-tumour activity. In this study, PLGA-microspheres containing usnic acid from Cladonia substellata were prepared by the double emulsion method, with or without PEG as stabilizer. The morphology of the microspheres was examined by optical and scanning electron microscopy. The in vitro kinetic profile of usnic acid loaded-microspheres was carried out by dissolution testing. The usnic acid content was analysed by HPLC. The cytotoxicity of free and encapsulated usnic acid was evaluated against HEp-2 cells using the MTT method. The anti-tumour assay was performed in mice against Sarcoma-180 tumour (UA 15 mg kg(-1) weight body/day) during 7 days. Animals were then sacrificed and tumour and organs were excised for histopathological analysis. Microspheres presented a smooth spherical surface with a mean diameter of 7.02 +/- 2.72 microm. The usnic acid encapsulation efficiency was approximately 100% (UA 10 mg 460 mg(-1) microspheres). A maximum release of 92% was achieved at the fifth day. The IC50 values for free and encapsulated usnic acid were 12 and 14 microg ml(-1), respectively. The encapsulation of usnic acid into microspheres promoted an increase of 21% in the tumour inhibition as compared with the free usnic acid treatment. In summary, usnic acid was efficiently encapsulated into PLGA-microspheres and the microencapsulation improved its anti-tumour activity.

Animals↗
PubMed2005

Spray-dried chitosan/ethylcellulose microspheres for nasal drug delivery: swelling study and evaluation of in vitro drug release properties.

The aim of this study was to develop spray-dried chitosan-based microspheres, suitable for nasal delivery of loratadine, and to evaluate their potential of modifying loratadine release. The microspheres were composed with ethylcellulose (EC) and chitosan (CM) in two different weight ratios, 1:2 and 1:3. One-phase systems (dispersions) and two-phase systems (emulsions and suspensions) were subjected to spray-drying, resulting in conventional and composed microspheres, respectively. The microspheres were evaluated with respect to the yield, particle size, encapsulation efficiency, physical state of the drug in the polymer matrix, swelling properties and in vitro drug release profile. It was shown that particle size, swelling ability and loratadine release from spray-dried microspheres were significantly affected by the polymeric composition and feed concentration in spray-drying process. Emulsifying method to produce composed EC/CM microspheres resulted in improved loratadine entrapment and moderate swelling, when compared to conventional chitosan microspheres. It seems like better formation of EC cores and chitosan coating were obtained when higher feed concentration and ultrasonic homogenization were employed in the preparation of emulsion systems and when EC to CM weight ratio was 1:3.

Absorption↗
PubMed2005

Influence of partially cross-linked alginate used in the production of alginate microspheres by emulsification.

Spherical and discrete calcium alginate microspheres had been produced by the emulsification technique. The microencapsulation process was highly efficient, but drug release from microspheres was rapid. A more orderly chain arrangement of the polymeric chains would give rise to a stronger and less permeable matrix capable of sustaining drug release. Therefore, the potential of using partially cross-linked alginate in the production of microspheres by emulsification was explored. The size and roundness of the microspheres, its drug content and drug release property were determined. The more viscous alginate solutions when reacted with more calcium salt added resulted in larger microspheres produced. Microspheres made from partially cross-linked alginate exhibited lower drug content and higher T75% values in drug release studies. This was due to decreased flexibility of the polymer chains which were partially held together by calcium ions, reducing subsequent interaction with the calcium ions resulting in lower drug entrapment efficiency and a more permeable microsphere matrix.

Alginates↗
PubMed2006

Zein microspheres as drug/antigen carriers: a study of their degradation and erosion, in the presence and absence of enzymes.

In the laboratory, zein microspheres are being investigated as drug/vaccine delivery systems. Preliminary experiments revealed that the release of an entrapped solute (ovalbumin, a model antigen) was limited when particles were incubated in phosphate buffered saline over a number of days. To understand the slow and limited release of the guest molecule and predict microsphere fate in vivo, the degradation of zein microspheres in different media, in the presence and in the absence of enzymes, was investigated in vitro. Zein microspheres were incubated in five different media: chloride Buffer (pH 2), Acetate Buffer (pH 5), Phosphate Buffered Saline (pH 7.4), gastric simulated fluid and gastro-intestinal simulated fluid for 1 week. Changes in suspension turbidity and pH, microsphere morphology and zein composition in the release medium was followed with time. The results showed that zein microspheres were extremely resistant to degradation in the absence of enzymes (which explains the slow release of entrapped solute), but were degraded by pepsin and pancreatin enzymes in simulated gastric and intestinal fluids, respectively (which indicates that release is likely to be much faster following oral microsphere administration). However, when administered via routes where enzymes are not present, e.g. intra-muscular, release is likely to be slow.

Antigens↗
PubMed2006

Preparation and control-release kinetics of isosorbide dinitrate microspheres.

Microcapsules for sustained release of poorly soluble isosorbide dinitrate (ISDN) were prepared based on ethylcellulose (EC) and/or blended with appropriate amounts of relatively hydrophilic hydroxypropyl cellulose (HPC) as matrix materials using the oil-in-oil emulsion evaporation method. The microspheres studied had three-mode sizes (100-150, 250-300 and 400-450 microm) and four polymer compositions (1, 0.833, 0.67 and 0.5 weight fraction EC). The microspheres were observed to contain essentially no drug crystalline domain and were of a porous morphology. The cumulative amounts of ISDN releasing from the microspheres as functions of mode fractions size and polymer compositions were measured in vitro. It was observed that the microspheres' size influenced the release behaviour of drug more obviously than the polymer composition. The smaller size and the higher hydrophilic HPC content show the faster release rate of drug and the smaller amount of drug residue. The kinetics of drug release depends on the size and polymer composition. The microspheres with 100-150 microm, of all polymer compositions, present one-stage diffusion kinetic with a lag period for drug release. On the other hand, the microspheres with the other two sizes exhibit two-stage diffusion kinetic with a lag period. According to the kinetic model, the microspheres obtained are surmised to have a core-shell like drug concentration distribution and/or a core-shell morphology.

Cellulose↗
PubMedDate not supplied

Protective colloids and polylactic acid co-affecting the polymorphic crystal forms and crystallinity of indomethacin encapsulated in microspheres.

The co-effect of protective colloids and polylactic acid (PLA) on the polymorphic crystal forms and crystallinity of indomethacin (IMC) in IMC-loaded PLA microspheres was investigated with differential scanning calorimetry, infrared spectroscopy and x-ray diffractometry, to evaluate the polymorphic crystal forms and crystallinity of IMC encapsulated in PLA microspheres. The surfactant, sodium dodecyl sulphate (SDS), was also used as a dispersing agent. The results indicate that the polymorphism and crystallinity of IMC encapsulated in IMC-loaded PLA microspheres was dependent on the type of protective colloid and PLA used. The amorphous state and alpha-form of IMC were found in the IMC-loaded PLA microspheres prepared using polysaccharide (pectin or beta-cyclodextrin) as a protective colloid or SDS as a dispersing agent. However, the amorphous and methylene chloride solvate of IMC seemed to exist in the IMC-loaded PLA microspheres prepared with the proteins (gelatin or albumin), synthetic cellulose derivative (methyl cellulose or hydroxylpropyl methylcellulose) or the synthetic nonionic polymer (polyvinyl alcohol, polyvinyl pyrrolidone or biosoluble polymer) as a protective colloid. PLA was found to express a certain crystallinity in microspheres and not be affected by the protective colloids, but it played a more important role in influencing the crystallization of IMC during microencapsulation than the protective colloids. No interaction occurred in the physical mixture of IMC and PLA, nor in the IMC-loaded PLA microspheres.

Calorimetry, Differential Scanning↗
PubMed2005

Development of novel interpenetrating network gellan gum-poly(vinyl alcohol) hydrogel microspheres for the controlled release of carvedilol.

Novel interpenetrating polymeric network microspheres of gellan gum and poly(vinyl alcohol) were prepared by the emulsion cross-linking method. Carvedilol, an antihypertensive drug, was successfully loaded into these microspheres prepared by changing the experimental variables such as ratio of gellan gum:poly(vinyl alcohol) and extent of cross-linking in order to optimize the process variables on drug encapsulation efficiency, release rates, size, and morphology of the microspheres. Formation of interpenetrating network and the chemical stability of carvedilol after preparing the microspheres was confirmed by Fourier transform infrared spectroscopy. Differential scanning calorimetry and x-ray diffraction studies were made on the drug-loaded microspheres to investigate the crystalline nature of the drug after encapsulation. Results indicated a crystalline dispersion of carvedilol in the polymer matrix. Scanning electron microscopy confirmed the spherical nature and smooth surface morphology of the microspheres produced. Mean particle size of the microspheres as measured by laser light scattering technique ranged between 230 and 346 microm. Carvedilol was successfully encapsulated up to 87% in the polymeric matrices. In vitro release studies were performed in the simulated gastric fluid or simulated intestinal fluid. The release of carvedilol was continued up to 12 h. Dynamic swelling studies were performed in the simulated gastric fluid or simulated intestinal fluid, and diffusion coefficients were calculated by considering the spherical geometry of the matrices. The release data were fitted to an empirical relation to estimate the transport parameters. The mechanical properties of interpenetrating polymeric networks prepared were investigated. Network parameters such as molar mass between cross-links and cross-linking density for interpenetrating polymeric networks were calculated.

Algorithms↗