Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Matrix stiffness”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40Linked to original sources

Fenestrations of the carotid internal elastic lamina and structural adaptation in stroke-prone spontaneously hypertensive rats.

Our aim was to determine the structural factors that determine the mechanical adaptation of the carotid arterial wall in stroke-prone hypertensive rats (SHRSP). Distensibility-pressure and elastic modulus-stress curves assessed by in vivo echo-tracking measurements indicated a reduction in arterial stiffness in 13-week-old SHRSP compared with Wistar-Kyoto rats (WKY). Elastin and collagen contents determined biochemically were not different between SHRSP and WKY. Confocal microscopy showed that the mean area of fenestrations and fraction of area occupied by fenestrations of the internal elastic lamina (IEL) were smaller in SHRSP than in WKY, which indicated a reduction in stress-concentration effects within the IEL. Immunohistologic staining of EIIIA fibronectin isoform and total fibronectin (also as determined by Western blot) was greater in SHRSP, which suggested increased cell-matrix interactions. We suggest that these structural modifications of the vascular wall play a synergistic role in the mechanical adaptation to a high level of stress in SHRSP.

Animals↗

Stiffness and inelastic deformation in acrylictitanium composite implant materials under compression.

A variety of acrylic bone cement-metal composite materials were prepared and tested in simple compression at 37 degrees C in order to evaluate the mechanical behavior of these materials for possible use in bone replacement. The stiffness of the composite was of particular concern, and a simple rule of mixture was used to raise the modulus of acrylic bone cement. The reinforcement of the cement was accomplished by titanium and Ti-6Al-4V in different forms, e.g., wire, sheet, wire mesh, and powder. Test results demonstrated that the stiffness of the bone cement could indeed be increased by a desired amount to that of bone. A 16% volume fraction consisting of 25 0.10 cm diam Ti-6Al-4V wires increased the modulus of the bone cement by 380% to a value comparable to the modulus of cortical bone. Titanium sheet was nearly as effective as wires in increasing the modulus of bone cement, while titanium mesh was not a significantly effective reinforcing material. The amount of titanium powder added to the bone cement did not alter the compliance of the matrix material. In addition, as the flow strength increased, the strain to the point of load instability decreased. It was concluded that the extent of stiffening was governed by nonuniform deformation in the metal and the adjacent matrix which could be explained on the basis of geometrical considerations. Some of the limitations of the test results as well as methods of predicting the composite implant material behavior are also outlined.

Alloys↗

Viscoelastic properties of collagen: synchrotron radiation investigations and structural model.

Collagen type I is the most abundant structural protein in tendon, skin and bone, and largely determines the mechanical behaviour of these connective tissues. To obtain a better understanding of the relationship between structure and mechanical properties, tensile tests and synchrotron X-ray scattering have been carried out simultaneously, correlating the mechanical behaviour with changes in the microstructure. Because intermolecular cross-links are thought to have a great influence on the mechanical behaviour of collagen, we also carried out experiments using cross-link-deficient tail-tendon collagen from rats fed with beta-APN, in addition to normal controls. The load-elongation curve of tendon collagen has a characteristic shape with, initially, an increasing slope, corresponding to an increasing stiffness, followed by yielding and then fracture. Cross-link-deficient collagen produces a quite different curve with a marked plateau appearing in some cases, where the length of the tendon increases at constant stress. With the use of in situ X-ray diffraction, it was possible to measure simultaneously the elongation of the collagen fibrils inside the tendon and of the tendon as a whole. The overall strain of the tendon was always larger than the strain in the individual fibrils, which demonstrates that some deformation is taking place in the matrix between fibrils. Moreover, the ratio of fibril strain to tendon strain was dependent on the applied strain rate. When the speed of deformation was increased, this ratio increased in normal collagen but generally decreased in cross-link-deficient collagen, correlating to the appearance of a plateau in the force-elongation curve indicating creep. We proposed a simple structural model, which describes the tendon at a hierarchical level, where fibrils and interfibrillar matrix act as coupled viscoelastic systems. All qualitative features of the strain-rate dependence of both normal and cross-link-deficient collagen can be reproduced within this model. This complements earlier models that considered the next smallest level of hierarchy, describing the deformation of collagen fibrils in terms of changes in their molecular packing.

Animals↗

Pathogenesis of vascular calcification in dialysis patients.

Soft-tissue and vascular calcification are highly prevalent in end-stage renal disease (ESRD). Vascular calcifications manifest as both medial and intimal calcification of arteries and are a hallmark of the accelerated atherosclerosis observed in uremia. The nature of vascular calcification is progressive, and is associated with arterial stiffness and increased cardiovascular mortality. Age, duration of dialysis, and diabetes mellitus are clear determinants of the severity of vascular calcification; however, more recently novel insights into the pathomechanisms of unwanted calcification processes have been gained. Disturbances of mineral metabolism such as hyperphosphatemia and hypercalcemia appear to contribute to progressive calcification, not only by passive precipitation but by actively inducing changes in vascular smooth muscle cell behavior toward an osteoblast-like phenotype. Specific calcium-regulatory proteins may act locally or systemically as calcification inhibitors. Dysregulations of calcification inhibitors, including fetuin-A, matrix Gla protein, osteoprotegerin, and pyrophosphates may also be pathophysiologically relevant factors in the context of uremic extraosseous calcification. In this context, low serum fetuin-A levels were recently found to be associated with increased mortality in cohorts of dialysis patients. This overview intends to summarize current knowledge of the scientific concepts involved in the pathogenesis of extraosseous calcification in ESRD.

Animals↗

Effects of cytochalasin D and latrunculin B on mechanical properties of cells.

Actin microfilaments transmit traction and contraction forces generated within a cell to the extracellular matrix during embryonic development, wound healing and cell motility, and to maintain tissue structure and tone. Therefore, the state of the actin cytoskeleton strongly influences the mechanical properties of cells and tissues. Cytochalasin D and Latrunculin are commonly used reagents that, by different mechanisms, alter the state of actin polymerization or the organization of actin filaments. We have investigated the effect of a wide range of Cytochalasin D and Latrunculin B concentrations (from 40 pM to 10 microM) on the mechanical properties of the cells within fibroblast populated collagen matrices. Contractile force and dynamic stiffness were measured by uniaxial stress-strain testing. The range of effective concentrations of Cytochalasin D (200 pM-2 microM) was broader than that of Latrunculin B (20 nM-200 nM). Activating the cells by serum did not change the effective range of Cytochalasin D concentrations but shifted that of Latrunculin B upward by tenfold. Simple mathematical binding models based on the presumed mechanisms of action of Cytochalasin D and Latrunculin B simulated the concentration-dependent mechanical changes reasonably well. This study shows a strong dependence of the mechanical properties of cells and tissues on the organization and degree of polymerization of actin filaments.

Actins↗

Functional design of horse hoof keratin: the modulation of mechanical properties through hydration effects.

Tensile moduli and J-integral fracture toughness values were determined for horse hoof-wall keratin at four hydration levels. The stiffness of hoof-wall was influenced by water content to a greater degree than is the stiffness of other mammalian hard keratins. Young's modulus increased from 410 MPa at 100% relative hydration (RH) to 14.6 GPa at 0% RH. Fracture toughness was maximal (22.8 kJ m-2) at an intermediate hydration (75% RH), which represents a two-fold increase over both fully hydrated and dehydrated material. Maximum fracture toughness occurred at a hydration level which is within the range that has been found in vivo in the hoof wall. These results lead to the hypothesis that the density of secondary bonding sites within the hoof-wall keratin matrix proteins provides the hoof organ with the means to modulate tissue properties, even though this epidermal tissue functions after the cells have died.

Animals↗

A coarse-grained molecular model for glycosaminoglycans: application to chondroitin, chondroitin sulfate, and hyaluronic acid.

A coarse-grained molecular model is presented for the study of the equilibrium conformation and titration behavior of chondroitin (CH), chondroitin sulfate (CS), and hyaluronic acid (HA)-glycosaminoglycans (GAGs) that play a central role in determining the structure and biomechanical properties of the extracellular matrix of articular cartilage. Systematic coarse-graining from an all-atom description of the disaccharide building blocks retains the polyelectrolytes' specific chemical properties while enabling the simulation of high molecular weight chains that are inaccessible to all-atom representations. Results are presented for the characteristic ratio, the ionic strength-dependent persistence length, the pH-dependent expansion factor for the end-to-end distance, and the titration behavior of the GAGs. Although 4-sulfation of the N-acetyl-D-galactosamine residue is found to increase significantly the intrinsic stiffness of CH with respect to 6-sulfation, only small differences in the titration behavior of the two sulfated forms of CH are found. Persistence length expressions are presented for each type of GAG using a macroscopic (wormlike chain-based) and a microscopic (bond vector correlation-based) definition. Model predictions agree quantitatively with experimental conformation and titration measurements, which support use of the model in the investigation of equilibrium solution properties of GAGs.

Biophysical Phenomena↗

[Morphogenetic role of the cortical cytoskeleton and plasma membrane of the ovum].

The classical embryological conception of egg cortex localization of morphogenetic determinants is interpreted in terms of current data on cell cortex and cell surface organization. The egg surface complex that involves cortical cytoskeleton--oolemma (stabilized with transmembrane linkage between the cytoskeleton and ligands of egg envelope extracellular matrix) presumably ensures storage of cortical morphogenetic information, i.e. the spatial memory of egg and zygote as a heterogeneous distribution of membrane and cortex components. Any of the rigid cortical complex component--membrane receptors, structural cytoskeletal proteins and also embedded in cortical gel-like framework of actin filaments RNP's and non-structural proteins (e.g. enzymes) may function as possible morphogenetic determinants. The coupling of general cortical rigidity and local contractility during the cleavage may be accounted (after Condeelis, 1981) for the actin-myosin interaction following a local dissociation of the stiff structural complex of actin--actin-binding proteins.

Actins↗

Value of hyaluronic acid in the prevention of contracture formation.

Joint stiffness secondary to immobilization was inhibited by intra-articular hyaluronic acid injection in an experimental joint contracture in rabbits. Biochemical and biomechanical parameters were used to evaluate the joint stiffness after nine weeks of immobilization. In all treatments, hyaluronic acid reduced the measured stiffness in the contracture by approximately 50% as compared to the contractures of the untreated rabbits. In addition, hyaluronic acid prevented the loss of glycosaminoglycans (GAGs) (as measured by hexosamine), which normally occurs in untreated contractures. The results are related to a working hypothesis that intra-articular injections of drugs such as hyaluronic acid (Healon-R) will stimulate hyaluronic acid synthesis within the matrices of periarticular connective tissue (PCT). If the spacing and lubricating properties of the glycosaminoglycans could be maintained in the stress-deprived state, the "centripetal collapse" of the fibrillar matrix could be avoided, anomalous cross-links could be minimized, and more normal joint mechanics could be retained.

Animals↗

Cross-talk between cardiac muscle and coronary vasculature.

The cardiac muscle and the coronary vasculature are in close proximity to each other, and a two-way interaction, called cross-talk, exists. Here we focus on the mechanical aspects of cross-talk including the role of the extracellular matrix. Cardiac muscle affects the coronary vasculature. In diastole, the effect of the cardiac muscle on the coronary vasculature depends on the (changes in) muscle length but appears to be small. In systole, coronary artery inflow is impeded, or even reversed, and venous outflow is augmented. These systolic effects are explained by two mechanisms. The waterfall model and the intramyocardial pump model are based on an intramyocardial pressure, assumed to be proportional to ventricular pressure. They explain the global effects of contraction on coronary flow and the effects of contraction in the layers of the heart wall. The varying elastance model, the muscle shortening and thickening model, and the vascular deformation model are based on direct contact between muscles and vessels. They predict global effects as well as differences on flow in layers and flow heterogeneity due to contraction. The relative contributions of these two mechanisms depend on the wall layer (epi- or endocardial) and type of contraction (isovolumic or shortening). Intramyocardial pressure results from (local) muscle contraction and to what extent the interstitial cavity contracts isovolumically. This explains why small arterioles and venules do not collapse in systole. Coronary vasculature affects the cardiac muscle. In diastole, at physiological ventricular volumes, an increase in coronary perfusion pressure increases ventricular stiffness, but the effect is small. In systole, there are two mechanisms by which coronary perfusion affects cardiac contractility. Increased perfusion pressure increases microvascular volume, thereby opening stretch-activated ion channels, resulting in an increased intracellular Ca2+ transient, which is followed by an increase in Ca2+ sensitivity and higher muscle contractility (Gregg effect). Thickening of the shortening cardiac muscle takes place at the expense of the vascular volume, which causes build-up of intracellular pressure. The intracellular pressure counteracts the tension generated by the contractile apparatus, leading to lower net force. Therefore, cardiac muscle contraction is augmented when vascular emptying is facilitated. During autoregulation, the microvasculature is protected against volume changes, and the Gregg effect is negligible. However, the effect is present in the right ventricle, as well as in pathological conditions with ineffective autoregulation. The beneficial effect of vascular emptying may be reduced in the presence of a stenosis. Thus cardiac contraction affects vascular diameters thereby reducing coronary inflow and enhancing venous outflow. Emptying of the vasculature, however, enhances muscle contraction. The extracellular matrix exerts its effect mainly on cardiac properties rather than on the cross-talk between cardiac muscle and coronary circulation.

Animals↗

Stilbenoid dendrimers

The first five generations of the stilbenoid dendrimers 1(n) (n = 1-5) have been prepared by a combined coupled synthesis (between the generations of the dendrons 8-12) and convergent synthesis. Wittig-Horner reactions together with a protecting group technique yield monodisperse compounds of high constitutional and configurational purity. The solubility of the stiff molecules, which have primarily a disklike shape in the first and second generations and a cylindrical shape in the third, fourth, and fifth generations, is governed by the alkoxy chains that are attached to the peripheral benzene rings. The number of stilbene building blocks increases according to the formula 3(2(n)-1) from 3 in the first generation (n = 1) to 93 in the fifth generation (n = 5). Consequently, the molecular mass reaches 24,000 in 1(5)b which contains 144 hexyloxy chains. An exact measurement of the mass is provided by matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) mass spectrometry. In solution, the stilbenoid dendrimers 1(n) exhibit a strong tendency to aggregate, which increases from generation to generation. In the pure state, columnar mesophases Col(hd) (1(1)b, 1(1)c, 1(2)b, and 1(2)c) and Col(ob) (1(2)b, 1(2)c) are formed; intramolecular steric hindrance prevents such ordered arrangements in higher generations 1(n) (n = 3, 4, 5).

Journal Article↗

Porous hybrid structures based on P(DLLA-co-TMC) and collagen for tissue engineering of small-diameter blood vessels.

Poly (D,L-lactide)-7co-(1,3-trimethylene carbonate) [P(DLLA-co-TMC)] (83 mol % DLLA) was used to produce matrices suitable for tissue engineering of small-diameter blood vessels. The copolymer was processed into tubular structures with a porosity of approximately 98% by melt spinning and fiber winding, thus obviating the need of organic solvents that may compromise subsequent cell culture. Unexpectedly, incubation in culture medium at 37 degrees C resulted in disconnection of the contact points between the polymer fibers. To improve the structural stability of these P(DLLA-co-TMC) scaffolds, a collagen microsponge was formed inside the pores of the synthetic matrix by dip coating and freeze drying. Hybrid structures with a porosity of 97% and an average pore size of 102 mum were obtained. Structural stability was preserved during incubation in culture medium at 37 degrees C. Smooth-muscle cells (SMCs) were seeded in these hybrid scaffolds and cultured under pulsatile flow conditions in a bioreactor (120 beats/min, 80-120 mmHg). After 7 days of culture in a dynamic environment viable SMCs were homogeneously distributed throughout the constructs, which were five times stronger and stiffer than noncultured scaffolds. Values for yield stress (2.8 +/- 0.6 MPa), stiffness (1.6 +/- 0.4 MPa), and yield strain (120% +/- 20%) were comparable to those of the human artery mesenterica.

Blood Vessel Prosthesis↗

Soft-tissue "flaws" are associated with the material properties of the healing rabbit medial collateral ligament.

This study evaluated microscopic flaws in the healing rabbit medial collateral ligament and their significance in terms of the material properties of this ligament during healing. A gap injury was created in the midsubstance of the medial collateral ligament in the right hindlimb of 15 skeletally mature (12 months old) New Zealand White rabbits. At postoperative intervals of 3, 6, or 14 weeks, histomorphometric analysis of the flaws was carried out in subgroups of animals. The medial collateral ligaments from four of the left hindlimbs (randomly selected) were used as uninjured contralateral controls. In one histologic section of each area of scar tissue and the analogous area in the controls, specified tissue flaws (blood vessels, fat cells, hypercellular areas, loose matrix, disorganized matrix, or a combination of these) were measured by four independent and blinded observers. The results showed that the mean total area of the flaws, as a percentage of the total section, and the mean area of the largest flaw decreased with healing time in each healing group but did not achieve control values by 14 weeks. Because it was not possible to test the healing medial collateral ligaments mechanically prior to measurement of the flaws (due to the destructive nature of failure testing), the data on the flaws were compared with the material strength and stiffness of a separate series of similarly injured and mechanically tested medial collateral ligaments (data published previously). A maximum likelihood statistical analysis showed a very strong functional association between the mean area of the largest flaw and the stress at failure (p < 0.004) and between the mean flaw area as a percentage of the total section area and the elastic modulus (p < 0.001). This study therefore demonstrates that it is possible to quantify material flaws in scar tissue in rabbit medial collateral ligaments, that these flaws become smaller with healing time as the scar remodels, and that flaws are functionally associated with the material properties of the ligament in this model (larger flaws with less tensile strength and more flaws with less stiffness).

Analysis of Variance↗

Infarct scar: a dynamic tissue.

Infarct scar, a requisite to the rebuilding of necrotic myocardium following myocardial infarction (MI), has long been considered inert. Earlier morphologic studies suggested healing at the infarct site was complete within 6-8 weeks following MI and resultant scar tissue, albeit necessary, was acellular and simply fibrillar collagen. Utilizing molecular and cellular biologic technologies, recent studies indicate otherwise. Infarct scar is composed of phenotypically transformed fibroblast-like cells, termed myofibroblasts (myoFb) because they express alpha-smooth muscle actin (alpha-SMA) and these microfilaments confer contractile behavior in response to various peptides and amines. These cells are nourished by a neovasculature and are persistent at the MI site, where they are metabolically active expressing components requisite to angiotensin (Ang) peptide generation, including converting enzyme, receptors for AngII and transforming growth factor (TGF)-beta1. They continue to elaborate fibrillar type I collagen. Their generation of these peptides contribute to ongoing scar tissue collagen turnover and to fibrous tissue formation of noninfarcted myocardium. Infarct scar contraction accounts for its thinning and its tonus may contribute to abnormal ventricular chamber stiffness with diastolic dysfunction. Infarct scar is a dynamic tissue: cellular, vascularized, metabolically active and contractile. Pharmacologic interventions with angiotensin converting enzyme inhibitor or AT1 receptor antagonist has proven effective in attenuating scar tissue metabolic activity and minimizing adverse accumulation of fibrous tissue in noninfarcted myocardium.

Angiotensin II↗

Carchesium stalk fibrillar matrix as a highly filled polymer network.

Glycerolated stalks of the sessile peritrich ciliate Carchesium sp. were treated with 10(-6) g ion/1 Ca2+ to disrupt the contractile spasmoneme. The resulting preparation consisted primarily of the fibrillar matrix, a dense extra-cellular meshwork of microfibrils. Some mechanical properties of this preparation have been investigated. The matrix tensile force-extension ratio relation for an initial stretch was characteristic of a soft, swollen polymer network, elastic modulus in young stalks 1.7 X 10(5) Nm-2, in mature stalks 4.0 X 10(5) Nm-2. The higher elastic modulus in mature stalks implies an increase in the interchain cross-link frequency. In young stalks, elastic modulus was found to be independent of the ambient Ca2+ concentration in the threshold range for spasmonemal contraction. Stalk relaxation was pronouncedly irreversible, showing stress softening and permanent hysteresis on repeated loading. Hysteresis was time independent and stiffness was not recovered after four hours at zero strain. Hysteresis was enhanced by repeated loading to the same tensile force. Stress-strain hysteresis at a low extension is characteristic of highly filled polymer networks in which polymer chains are interconnected via rigid filler particles as well as directly cross-linked.

Biopolymers↗

Computational stress-deformation analysis of arterial walls including high-pressure response.

BACKGROUND: Changes in the mechanical behavior of arteries after balloon angioplasty cause cell reactions that may be responsible for restenosis. Hence, the study of the stress-deformation changes in arterial walls following supraphysiological tissue loading is an essential task. METHODS: A normal LAD coronary artery was modeled and computationally analyzed as a two-layer, thick-walled, anisotropic and inelastic circular tube including residual strains. Each layer was treated as a fibre-matrix composite. The tube was subjected to an axial stretch of 1.1 and a transmural pressure of 750 mm Hg. Since overstretch of remnant non-diseased tissue in lesions is a primary mechanism of lumen enlargement this model approach represents a reasonable first step. RESULTS: At physiological loading, the residual stresses led to a significant reduction of the high circumferential stress values at the inner wall, and the stress gradients. At low pressure level the media was the mechanically relevant layer, while at supraphysiological loading, the adventitia was the predominant load-carrying constituent providing a stiff support for 'redistribution' of soft plaque components by means of radial compression. After unloading to physiological loading conditions the stress state in the arterial wall differed significantly from that before inflation; the stress gradient in the media even changed its sign. Complete unloading indicated lumen enlargement, material softening and energy dissipation, which is in agreement with experimental studies. CONCLUSIONS: This method may be useful to improve interventional protocols for reducing the dilatational trauma, and thereby the adverse biological reaction in arterial walls following balloon angioplasty.

Angioplasty, Balloon, Coronary↗

Self-assembly of a metallosupramolecular coordination polyelectrolyte in the pores of SBA-15 and MCM-41 silica.

It is shown that intrinsically stiff chain aggregates of a metallosupramolecular coordination polyelectrolyte (MEPE) can form in the cylindrical nanopores of MCM-41 and SBA-15 silica by self-assembly of its constituents (metal ions and organic ligand). The UV/vis spectra of the resulting MEPE-silica composites exhibit the characteristic metal-to-ligand charge transfer band of the MEPE complex in solution. For the MEPE-silica composite in SBA-15 an iron content of 1.2 wt % was found, corresponding to ca. 10 MEPE chains disposed side by side in the 8 nm wide pores of the SBA-15 matrix. In the case of MCM-41 (pore width < 3 nm), where only one MEPE chain per pore can be accommodated, an iron content of 0.3 wt % was obtained, corresponding to half-filling of the pores. It was also found that MEPE chains spontaneously enter the pores of SBA-15, when a solution of MEPE is exposed to the silica matrix.

Journal Article↗

Insulin-like growth factor-I improves cellular and molecular aspects of healing in a collagenase-induced model of flexor tendinitis.

Flexor tendinitis is a common and debilitating injury of elite and recreational athletes. Healing may be improved through intratendinous injection of insulin-like growth factor-I (IGF-I), which has been shown in vitro to stimulate mitogenesis and enhance tendon matrix production. This study investigated the effects of intratendinous injection of IGF-I on tendon healing in an equine model of flexor tendinitis. Collagenase-induced lesions were created in the tensile region of theflexor digitorum superficialis tendon of both forelimbs of eight horses. Treated tendons were injected with 2 microg rhlGF-I intralesionally every other day for 10 injections, while controls received 0.9% NaCl. Tendon fiber deposition and organization were evaluated serially using ultrasonography throughout the 8 week trial period. Following euthanasia, the tendons were harvested and DNA, hydroxyproline, and glycosaminoglycan content determined, mechanical strength and stiffness evaluated, gene expression and spatial arrangement of collagen types I and III assessed by northern blot and in situ hybridization, and tendon fiber architecture assessed by polarized light microscopy. Local soft tissue swelling was reduced in the IGF-I treated limbs. Similarly, lesion size in IGF-I treated tendons was smaller 3 and 4 weeks after initiation of treatment. Cell proliferation and collagen content of the IGF-I treated tendons were increased compared to controls. Mechanically, IGF-I treated tendons showed a trend toward increased stiffness compared to saline treated controls. Considered together with the decreased soft tissue swelling and improved sonographic healing, these data support the potential use of intralesional IGF-I for treatment of debilitating tendon injuries.

Animals↗