Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Cadmium Compounds”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40Linked to original sources

A new Klebsiella planticola strain (Cd-1) grows anaerobically at high cadmium concentrations and precipitates cadmium sulfide.

Heavy metal resistance by bacteria is a topic of much importance to the bioremediation of contaminated soils and sediments. We report here the isolation of a highly cadmium-resistant Klebsiella planticola strain, Cd-1, from reducing salt marsh sediments. The strain grows in up to 15 mM CdCl(2) under a wide range of NaCl concentrations and at acidic or neutral pH. In growth medium amended with thiosulfate, it precipitated significant amounts of cadmium sulfide (CdS), as confirmed by x-absorption spectroscopy. In comparison with various other strains tested, Cd-1 is superior for precipitating CdS in cultures containing thiosulfate. Thus, our results suggest that Cd-1 is a good candidate for the accelerated bioremediation of systems contaminated by high levels of cadmium.

Anaerobiosis↗

Cloning and expression of cadD, a new cadmium resistance gene of Staphylococcus aureus.

A cadmium resistance gene, designated cadD, has been identified in and cloned from the Staphylococcus aureus plasmid pRW001. The gene is part of a two-component operon which contains the resistance gene cadD and an inactive regulatory gene, cadX*. A high degree of sequence similarity was observed between cadD and the cadB-like gene from S. lugdunensis, but no significant similarity was found with either cadA or cadB from the S. aureus plasmids pI258 and pII147. The positive regulatory gene cadX* is identical to cadX from pLUG10 over a stretch of 78 codons beginning at the N terminus, but it is truncated at this point and inactive. Sequence analysis showed that the cadmium resistance operon resides on a 3,972-bp element that is flanked by direct repeats of IS257. The expression of cadD in S. aureus and Bacillus subtilis resulted in low-level resistance to cadmium; in contrast, cadA and cadB from S. aureus induced higher level resistance. However, when the truncated version of cadX contained in pRW001 is complemented in trans with cadX from plasmid pLUG10, resistance increased approximately 10-fold suggesting that the cadmium resistance operons from pRW001 and pLUG10 are evolutionarily related. Moreover, the truncated version of cadX contained in pRW001 is nonfunctional and may have been generated by deletion during recombination to acquire the cadmium resistance element.

Amino Acid Sequence↗

Expression of the herpes simplex virus 1 alpha transinducing factor (VP16) does not induce reactivation of latent virus or prevent the establishment of latency in mice.

A feature of the cascade regulation of herpes simplex virus 1 gene expression in productive infection is that the first genes to be expressed, the alpha genes, are transactivated by a structural component of the virion designated as the alpha transinducing factor (alpha TIF). In this study, we have tested the hypothesis that latent infection of sensory neurons results from the failure of alpha TIF, a tegument protein, to be transported from the nerve endings to the nucleus of the sensory neuron. Two viruses were constructed. The first recombinant virus (R6003) contained a second copy of the alpha TIF gene placed under the control of a metallothionein promoter. The second recombinant virus (R6004) is identical to R6003 except for the presence of a stop codon inserted at amino acid 70 of the second alpha TIF gene. The metallothionein promoter inserted into the viral genome was shown to be expressed, and alpha TIF mRNA was detected by in situ hybridization of sections of trigeminal ganglia of mice infected with R6003, both untreated and those given cadmium injections. In all experiments, there were no significant differences in the recovery of latent virus from mice infected with R6003 or R6004, whether injected with cadmium or not. Cadmium administration at the time of infection and at intervals thereafter did not preclude establishment of latency. In another series of experiments, transgenic mice expressing the metallothionein-driven alpha TIF did not differ from nontransgenic siblings with respect to the incidence of latent virus in trigeminal ganglia. We conclude that the absence of alpha TIF cannot alone account for the establishment of latency.

Animals↗

Induction of metallothionein-I mRNA in cultured cells by heavy metals and iodoacetate: evidence for gratuitous inducers.

A mouse hepatocyte cell line selected for growth in 80 microM CdSO4 (Cdr80 cells) was used to test the role of metallothioneins in heavy metal detoxification. The cadmium-resistant (Cdr80) cells have double minute chromosomes carrying amplified copies of the metallothionein-I gene and accumulate ca. 20-fold more metallothionein-I mRNA than unselected cadmium-sensitive (Cds) cells after optimal Cd stimulation. As a consequence, the amount of Cd which inhibits DNA synthesis by 50% is ca. 7.5-fold higher in Cdr80 cells than in Cds cells. Cds and Cdr80 cells were compared in terms of their resistance to other heavy metals. The results indicate that although Zn, Cu, Hg, Ag, Co, Ni, and Bi induce metallothionein-I mRNA accumulation in both Cdr80 and Cds cells, the Cdr80 cells show increased resistance to only a subset of these metals (Zn, Cu, Hg, and Bi). This suggests that not all metals which induce metallothionein mRNA are detoxified by metallothionein and argues against autoregulation of metallothionein genes. Metallothionein-I mRNA is also induced by iodoacetate, suggesting that the regulatory molecule has sensitive sulfhydryl groups.

Animals↗

Mortality from lung cancer among a cohort of nickel cadmium battery workers: 1946-84.

The lung cancer mortality experienced by a cohort of 3025 workers from a nickel cadmium battery factory during the period 1946-84 has been investigated. Occupational histories were described in terms of 75 jobs: eight with "high," 14 with "moderate" or slight, and 53 with minimal or zero exposure to cadmium oxide (hydroxide) dust. The Mantel-Haenszel technique applied to prospective (or historical prospective) studies was used to compare the estimated cadmium exposures (durations of exposed employment) of those dying from lung cancer with those of matching survivors in the same year of follow up, while controlling for sex and year, and age of starting employment. Among workers first employed in the period 1923-46, there was some evidence of an association between the risk of dying from lung cancer and duration of employment in "high or moderate" exposure jobs, although the evidence relied heavily on the findings for the single highest exposure category. Among workers first employed in the period 1947-75, there was no evidence whatsoever of such an association.

Air Pollutants, Occupational↗

Mortality and cancer incidence in Swedish battery workers exposed to cadmium and nickel.

OBJECTIVE: To follow up cancer incidence and mortality in a group of Swedish battery workers exposed to nickel hydroxide and cadmium oxide. METHODS: 869 workers, employed at least one year between the years 1940 and 1980 were followed up until 1992. Vital status and causes of death were obtained from the Swedish cause of death registry. Cancer morbidity was retrieved from the Swedish cancer registry. Regional reference rates were used to compute the expected numbers of deaths and cancers. RESULTS: Up to 31 December, 1992, a total of 315 deaths (292 in men and 23 in women) had occurred in the cohort. For men, the overall standardised mortality ratio (SMR) was 106 (95% confidence interval (95% CI) 93.7 to 118) and for women 83.8 (95% CI 53.1 to 126). The SMRs for total cancer mortality were 125 (95% CI 98.2 to 157) for men and 69.5 (95% CI 25.5 to 151) for women. The SMR for lung cancer in men was 176 (95% CI 101 to 287). No lung cancers were found among female workers. Up to 31 December, 1991, a total of 118 cancers had occurred in the cohort. A significantly increased standardised incidence ratio (SIR) was found for cancer of the nose and nasal sinuses in men, three cases v 0.36 expected, yielding an SIR of 832 (95% CI 172 to 2430). Applying a 10 year latency period in cohort members exposed to > or = 1000 micrograms cadmium/m3, the SIR was 1107 (95% CI 134 to 4000). Similarly, for cohort members exposed to 2000 micrograms nickel/m3, the SIR was 1080 (95% CI 131 to 3900). CONCLUSION: There was an increased overall risk for lung cancer, but no exposure-response relation between cumulative exposure to cadmium or nickel and risk of lung cancer. There was a highly significant increased risk of cancer of the nose and nasal sinuses, which may be caused by exposure to nickel or cadmium or a combination of both exposures.

Adult↗

A miniature cadmium telluride detector module for continuous monitoring of left-ventricular function.

The authors describe a miniature cadmium telluride (CdTe) detector module for continuous monitoring of ventricular function using an equilibrium radionuclide blood-pool label. The detector and collimator are small, light, and suitable for direct attachment to the chest wall. Clinical studies in 18 patients using a prototype system demonstrated reasonably good correlation with left-ventricular ejection fractions (LVEF) determined by first-pass studies performed with a multicrystal scintillation camera (r = 0.74) and gated equilibrium studies performed with a computerized sodium iodide (Nal) probe (r = 0.76). The CdTe device may prove to be useful in patients in intensive and coronary care units as well as in ambulatory patients.

Adult↗

A patch-clamp study: secretagogue-induced currents in rat peritoneal mast cells.

Ca2+ entry through plasma membrane has been considered to play a significant role in elevating cytosolic free Ca2+ concentrations during stimulus-secretion coupling in mast cells, but electrophysiological evidence of the Ca2+ channels is lacking. We examined the properties of secretagogue (compound 48/80)-induced currents in rat peritoneal mast cells, using the patch-clamp technique. In the whole cell recordings, the addition of compound 48/80 induced transient currents that were suppressed by Cd or reduced by ethylene glycol-bis(beta-aminoethyl ether)-N,N,N',N'-tetraacetic acid (EGTA). In Ringer solution containing 2 mM Ca2+, the current-voltage relation was fairly linear from -100 to 50 mV and the reversal potential was 14 +/- 10.1 mV (n = 9). When the external Ca2+ was approximately 1 microM, the compound 48/80-induced currents were marginal, but readmission of Ca2+ or Ba2+ to the bath solution led to an appearance of the currents. In the cell-attached patches, the stimulation enhanced the activity of inward current mediated by Ba2+. The unitary inward Ba2+ current was characterized by the unitary conductance of 10.5 +/- 2.0 pS (n = 10) with isotonic BaCl2 pipette solution, the extrapolated reversal potential of 60.7 +/- 16.0 mV (n = 10) positive to the resting membrane potentials. The percent open time of the inward Ba2+ current channel was not appreciably changed by voltage. In some whole cell recordings, an increase in openings of the cation-selective channel (20-45 pS) was identified in the stimulated cells. When the external Na+ was completely replaced by choline+, the compound 48/80-induced currents had a fairly linear current-voltage relation.(ABSTRACT TRUNCATED AT 250 WORDS)

Animals↗

Regional myocardial radiotracer kinetics in dogs using miniature radiation detectors.

An implantable device for continuous measurement of regional myocardial radioisotope activity was designed and validated. The probe consists of a 2-mm3 cadmium telluride crystal surrounded by lead foil housed in a 4.5-mm outer diameter steel cylinder. Activity in serial dilutions of thallium-201 measured by this miniature gamma detector correlated well with activity measured in the well counter (r = 0.99). In vivo probe measurements of regional myocardial thallium-201 activity in a canine model were compared with activity in punch biopsies, again with excellent correlation (r = 0.90). The crystal was mounted on a modified arterial clamp, which was inserted into the left ventricle through, the apex and situated on the endocardial surface of the anterior or posterior wall. It was thus possible to measure regional isotope activity without excessive background from the blood pool and opposite heart wall. The probe was found best suited for monitoring activities of isotopes with energies between 60 and 250 keV. With a pair of these devices, dynamic studies of the myocardial kinetics of radioisotopes such as thallium-201 in normal and ischemic myocardium are now possible.

Animals↗

Electron microscopic investigations on dust penetration into the pulmonary interstitium in experimental pneumoconioses.

Pneumoconioses produced by intratracheal applications of various dusts (quartz, coal, cadmium and lead sulfide) in rats were investigated by electron microscopy in order to follow the pathway of the dust particles from the alveoli into the pulmonary interstitium. As postulated by Spencer in 1977 on the basis of light microscopic investigations, the dust particles produce necroses of the alveolar septae ('alveolar ulcers'). TWo forms of necroses appear to occur: with a less severe dust exposure, individual pneumocytes and their basement membrane are destroyed by dust particles. Dust-laden, macrophages are deposited here which are displaced into the stroma after re-epithelization of the alveolar defect. On the other hand, with massive dust exposure, almost all pneumocytes of the affected alveoli become necrotic. The affected alveoli collapse and are replaced by connective tissue, so that the dust is situated in the connective tissue stroma. A transcellular penetration of the dust particles into the pulmonary interstitium or an immigration of dust-laden macrophages into the pulmonary stroma through the intercellular junctions of intact pneumocytes was not observed in any of the pneumoconiosis models.

Animals↗

Detecting abnormalities in left ventricular function during exercise by respiratory measurement.

The degree of exercise-induced cardiac dysfunction and its relation to the anaerobic threshold were evaluated in 23 patients with chronic heart disease. A symptom-limited exercise test was performed with a cycle ergometer with work rate increased by 1 W every 6 seconds. Left ventricular function, as reflected by ejection fraction, was continuously monitored with a computerized cadmium telluride detector after the intravenous injection of technetium-labeled red blood cells. The anaerobic threshold (mean, 727 +/- 166 ml/min) was determined by the noninvasive measurement of respiratory gas exchange. As work rate rose, the left ventricular ejection fraction increased but reached a peak value at the anaerobic threshold and then fell below resting levels. Ejection fraction at rest, anaerobic threshold, and peak exercise were 41.4 +/- 11.3%, 46.5 +/- 12.0%, and 37.2 +/- 11.0%, respectively. Stroke volume also increased from rest (54.6 +/- 17.0 ml/beat) to the point of the anaerobic threshold (65.0 +/- 21.2 ml/beat) and then decreased at peak exercise (52.4 +/- 18.7 ml/beat). The slope of the plot of cardiac output versus work rate decreased above the anaerobic threshold. The anaerobic threshold occurred at the work rate above which left ventricular function decreased during exercise. Accurate determination of the anaerobic threshold provides an objective, noninvasive measure of the oxygen uptake above which exercise-induced deterioration in left ventricular function occurs in patients with chronic heart disease.

Anaerobic Threshold↗

Size-dependent absorption and defect states in CdSe nanocrystals in various multilayer structures.

GeS2-CdSe superlattices and composite films are prepared by consecutive thermal evaporation of CdSe and GeS2 in vacuum. CdSe layer thickness varies between 1 and 10 nm, while the thickness of GeS2 layers is either equal (in superlattices) to or 20 times greater (in composite films) than that of CdSe layers. Standard spectral photocurrent measurements and various constant photocurrent methods are used to study optical absorption of all samples. An overall blueshift is observed with decreasing CdSe layer thickness of superlattices. This shift is related to a size-induced increase of the optical band gap of CdSe due to one-dimensional carrier confinement in the continuous nanocrystalline CdSe layers. A number of features are observed in the absorption spectra of composite films containing CdSe nanocrystals with average radii of approximately 2.5 and approximately 3.3 nm. They are discussed in terms of three-dimensional carrier confinement and are considered a manifestation of excited electron states in CdSe nanocrystals embedded in GeS2 thin film matrix. In addition to these discrete features, the exponential dependence of the optical absorption (Urbach) edge indicates a distribution of "valence band" tail states associated with disorder. Transient photoconductivity measurements made on similarly prepared SiOx-CdSe superlattices exhibit a rapid fall in photocurrent by a power law decay over several orders of magnitude of time, which is consistent with multi-pletrapping transport via an extensive distribution of deep defects.

Cadmium Compounds↗

A Raman study of CdSe and ZnSe nanostructures.

Raman studies have been carried out on CdSe nanotubes and ZnSe nanorods produced by surfactant-assisted synthesis. The Raman spectrum of CdSe nanotubes shows modes at 207.5 and 198 cm-1; the former arises from the longitudinal optic phonon mode red-shifted with respect to the bulk mode because of phonon confinement, and the latter is the l = 1 surface phonon. Analysis based on the phonon confinement model demonstrates that the size of the nanoparticle responsible for the red-shift is about 4 nm, close to the estimate from the blue-shift of the photoluminescence. The Raman spectrum of ZnSe nanorods shows modes at 257 and 213 cm-1, assigned to longitudinal and transverse optic phonons, blue-shifted with respect to the bulk ZnSe modes because of compressive strain. The mode at 237 cm-1 is the surface phonon.

Cadmium Compounds↗

Layer-by-layer growth of CdSe-based nanocrystal light-emitting diodes.

The partial exchange of surface-passivating trioctylphosphine oxide (TOPO) on CdSe and ZnS-clad CdSe (CdSe/ZnS) nanocrystals with primary amines was utilized to grow ultra-thin films of these nanocrystals under nonaqueous conditions. This growth was achieved using 1,12-diaminododecane in a layer-by-layer assembly format, where one of the amino groups binds with the nanocrystal surface and the other regenerates the interface for further binding of nanocrystals. The nature of the growth is dependent on the relative surface affinity between the TOPO and the primary amine toward the zinc or cadmium sites on the nanocrystals. Using this technique, high-quality luminescent films of these nanocrystals can be built with well-defined thicknesses. Electroluminescent devices have been fabricated using this methodology.

Cadmium Compounds↗

Photodegradation of SiO2-coated CdS nanoparticles within silica gels.

A comparative study of the photodegradation of CdS nanoparticles coated with silica shells dispersed in water and embedded in two silica gels with different pore size is presented. Although encapsulation of the quantum dots in a silica shell previously was proven to provide a basically permanent protection against light-induced surface oxidation (photodegradation), this protection is not always maintained when the coated particles are incorporated within different silica gels. Degradation of the CdS occurs when the coated particles are incorporated within silica gels with an open structure, which suggests that the shells somehow crack due to tension in the gel structure. This behavior is analyzed by absorption and luminescence spectroscopies, electron microscopy, and nitrogen sorption.

Cadmium Compounds↗

Electric field directed layer-by-layer assembly of highly fluorescent CdTe nanoparticles.

An electric field directed layer-by-layer assembly technique has been developed by combining electrophoretic deposition and the layer-by-layer self-assembly method. This technique is employed to realize spatially selective deposition of CdTe nanoparticles on electrodes of indium-tin oxide (ITO). The fluorescence measurements prove that the selectivity of the film deposition increases against applied voltage and reaches 99% when the voltage is 1.4 V. Upon further increase of the voltage, the selectivity slightly decreases. This decrease occurs because high voltage leads to a degradation of CdTe particles and thus reduces fluorescence intensity of the resultant CdTe film. However, fluorescence investigation indicates that a spacer layer of polyelectrolyte complex between the ITO electrode and the CdTe film is useful to protect the CdTe from being destroyed under high voltages.

Ammonium Chloride↗

Assembly of CdS nanoparticles in patterned structures by a novel ion-entrapment process in thermally evaporated fatty acid films.

The formation of cadmium sulfide nanoparticle assemblies in a patterned manner on suitable substrates is described. The protocol for realizing such structures comprises the following steps. In the first step, patterned films of a fatty acid are thermally evaporated onto solid supports using suitable masks (e.g., a transmission electron microscope grid). Thereafter, the fatty acid film is immersed in cadmium sulfate solution and Cd2+ ions entrapped in the lipid matrix by electrostatic complexation with the carboxylate ions of the fatty acid molecules. The final step involves reaction of the entrapped Cd2+ ions with Na2S, leading to the in situ generation of cadmium sulfide nanoparticles within the patterned lipid matrix. This approach shows promise for generating patterned nanoparticle assemblies of different chemical compositions.

Cadmium Compounds↗