Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “ZIRCONIUM”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources

Titanium and zirconium complexes of dianionic and trianionic amine-phenolate-type ligands in catalysis of lactide polymerization.

The synthesis of alkoxotitanium(IV) and -zirconium(IV) complexes of seven chelating tetradentate di- or trianionic amine-phenolate ligands belonging to three families and their application in L-lactide polymerization are described. The isopropoxotitanium complexes were synthesized by a direct reaction between the ligand precursors and titanium tetraisopropoxide, whereas the zirconium complexes were synthesized by various routes. For titanium, complexes of all seven ligands could be synthesized. For zirconium, the hexacoordinate complexes derived from all dianionic ligands were synthesized; however, the only pentacoordinate complex that could be produced was the one derived from the bulky trianionic ligand. X-ray structures of zirconium complexes of the three families indicated a substantial pi donation from the alkoxo ligand to the metal. All complexes were found to be active lactide polymerization catalysts, and their activity was found to depend strongly on the metal, the coordination number around the metal, and the phenolate substituents but not on the ligand backbone.

Journal Article↗

Titanium and zirconium complexes of a phosphorus-containing p-tert-butylcalix[5]arene ligand: importance of metal and conformation on ligand/metal binding.

Binding of a calix[5]arene containing a single phosphorus ligand and three hydroxyl groups, calix[5]PNMe2(OH)3, 1, toward titanium and zirconium is investigated to yield insight into the factors that determine the strength of the phosphorus/metal interaction within the constraint of the calix[5]arene. Treatment of 1 with tetrakis(dimethylamino)titanium yields three complexes, 4a, 4b, and 4c, each of which shows the loss of 3 mol of dimethylamine in the reaction with the titanium bound to three oxygens. Treatment of 1 with tetrakis(diethylamino)zirconium proceeds similarly, although only two products, 5a and 5b, were isolated. X-ray structures of the products were obtained. Complexes 4a and 5a show similar geometries, with the calix[5]arene in an approximate cone conformation and the phosphorus lone pair directed toward the metal. The P...M distances are, however, markedly different: 3.69 A in 4a and 3.18 A in 5a, the former indicative of no interaction and the latter a weak one. Complexes 4b and 5b each are dimers, featuring a planar four-membered M-O-M-O ring; however, the titanium is five-coordinate in 4b with no phosphorus/metal bond, while the zirconium in 5b is six-coordinate with a P-Zr distance of 2.95 A. Complex 4c is monomeric with the calix[5]arene in an approximate 1,2-alternate conformation with a P...Ti distance of 2.90 A. The two most significant aspects controlling the phosphorus/metal contact are the metal, with the larger zirconium showing stronger interaction, and the calix[5]arene conformation, with the cone conformation showing the weaker interaction.

Journal Article↗

Formation of silazirconacyclopentenes from zirconium-silene complex and alkynes and their reactivities.

During the course of our study on the formation of a complex having a zirconium-silicon bond, we found that zirconium-silene complex 7 was formed from Cp2ZrCl2 and Me2PhSiLi. In the presence of alkyne, diarylalkyne reacted with silene coordinated with zirconium to give silazirconacyclopentene 8. On the other hand, dialkylalkyne inserted into a zirconium-silene complex gave silazirconacyclopentene 9. Hydrolysis of 8 or 9 afforded vinylsilane 13 or allylsilane 16. Transmetalation of zirconacycle 8 into copper in the presence of allyl halide gave a bis-allylated compound in high yield, indicating that alkylation occurred on the alkyne carbon and the methyl group of silicon. From bis-allylated compounds, eight-membered ring compounds having silicon were obtained in high yield using olefin metathesis.

Journal Article↗

Synthesis of a zirconium sandwich complex and crystallographic characterization of its adduct with tetrahydrofuran.

Reductive elimination of alkane from a silylated bis-indenyl zirconium isobutyl hydride affords a zirconium sandwich complex with an unusual eta6 indenyl ligand. Crystallographic characterization of its adduct with tetrahydrofuran has been achieved and reveals significant localization in the six-membered ring. Complexation of more potent ligands such as carbon monoxide and diphenylacetylene are effective in promoting haptotropic rearrangement of the eta6 indenyl ligand and provides familiar bent zirconocene derivatives. The zirconium sandwich compound also undergoes oxidative addition of carbon-hydrogen bonds of pyridyl ligands, resulting in a crystallographically characterized dimethylamino pyridyl hydride complex of zirconium.

Journal Article↗

Zirconium sandwich complexes with eta(9) indenyl ligands: well-defined precursors for zirconocene-mediated coupling reactions.

A family of isolable, well-defined bis-indenyl zirconium sandwich complexes, (eta(5)-C(9)H(5)-1,3-R(2))(eta(9)-C(9)H(5)-1,3-R(2))Zr (R = silyl, alkyl), have been prepared by either alkane reductive elimination or alkali metal reduction of a suitable zirconium(IV) dihalide precursor. Crystallographic characterization of two of these derivatives, R = SiMe(2)CMe(3) and CHMe(2), reveals unprecedented eta(9) coordination of one of the indenyl ligands. Variable-temperature and EXSY NMR studies establish that the eta(5) and eta(9) rings are rapidly interconverting in solution. The sandwich complexes serve as effective sources of low-valent zirconium reacting rapidly with both olefins and alkynes at ambient temperature. In contrast to bis-cyclopentadienyl chemistry, the olefin adducts of the bis-indenyl zirconium sandwiches undergo preferential C-H activation to yield the corresponding allyl hydride compounds, although reaction with excess olefin proceeds through the eta(2)-olefin adduct, forming the corresponding zirconacyclopentane.

Journal Article↗

Synthesis of ordered mesoporous zirconium phosphate films by spin coating and vapor treatments.

Ordered mesoporous zirconium phosphate films were prepared on a silicon substrate by spin coating using a mixture of zirconium isopropoxide, triethyl phosphate, Pluronic P123 triblock copolymer, nitric acid, ethanol, and water. The spin-on film was consecutively treated with vapors of phosphoric acid and ammonia. The post-vapor treatments effectively enhanced the thermal stability of an ordered mesostructure when heated to 500 degrees C. XRD and TEM analyses show that the calcined zirconium phosphate film has a hexagonal structure with straight channels parallel to the film surface. The zirconium phosphate film exhibited high proton conductivity of 0.02 S/cm parallel to the film surface at 80% RH and 25 degrees C.

Journal Article↗

Carbon paste electrode for trace zirconium(IV) determination by adsorption voltammetry.

A very sensitive and selective procedure was developed for trace measurement of zirconium based on the cathodic adsorptive stripping voltammetry of the zirconium-alizarin red S(ARS) complex at a carbon paste electrode (CPE). The 2nd-order derivative linear scan voltammograms of the zirconium-ARS complex were recorded by a model JP-303 polarographic analyzer from 0.0 to -1.0 V (vs. SCE). Optimal analytical conditions were found to be: an acetic acid (0.1 mol l(-1))-potassium biphthalate (0.08 mol l(-1)) buffer solution (pH 4.8) containing 4.0 x 10-6 mol l(-1) ARS; accumulation potential, 0.0 V; accumulation time, 180 or 90 s; rest time, 10 s; scan rate, 250 mV s(-1). The results showed that the complex can be adsorbed on the surface of the CPE, yielding one peak at -0.51 V, corresponding to the reduction of ARS in the complex at the electrode. The detection limit was found to be 1.0 x 10(-10) mol l(-1) (S/N = 3) for 240 s accumulation. The linear range was 2.0 x 10(-10)-4.0 x 10(-7) mol l(-1). The developed method was applied to the determination of trace zirconium in the ore samples with satisfactory results.

Journal Article↗

Synthesis, structure, and ethene polymerisation catalysis of 1- or 2-silyl substituted bis[indenyl]zirconium(IV) dichlorides.

The systematic syntheses of 1- and 2-substituted silylindenes, with a wide variety of substitution patterns on the silyl moiety, and their corresponding zirconocene dichlorides are presented. The rac- and meso-diastereomers of the 1-substituted zirconocene dichlorides can in most cases be separated. Instable zirconocenes were observed for certain substitution patterns. Two of the obtained zirconocene dichlorides, bis[2-(dimethylsilyl)indenyl]zirconium dichloride (4a) and bis[2-(trimethylsilyl)indenyl]zirconium dichloride (4b), were characterised by single crystal X-ray diffraction. On the basis of DFT results, the two compounds are geometrically similar, i.e. the additional methyl group on the silyl moiety only affects the conformational energy profile. Differences in their catalyst performance in the homopolymerisation studies with ethane are thus attributed to conformational control. For the remaining complexes, sterically less demanding silyl groups seem to be favoured with respect to the catalyst performance. All the 2-isomers have lower polymerisation activities than the unsubstituted bis[indenyl]zirconium dichloride/MAO system. Curiously, the rac-bis[1-(dimethylphenylsilyl)indenyl]zirconium dichloride/MAO system is found to be the most active catalyst in ethene homopolymerisations.

Journal Article↗

Colloidal titration of aqueous zirconium solutions with poly(vinyl sulfate) by potentiometric endpoint detection using a toluidine blue selective electrode.

Zirconium oxy-salts were hydrolyzed to form positively charged polymer or cluster species in acidic solutions. The zirconium hydrolyzed polymer was found to react with a negatively charged polyelectrolyte, such as poly(vinyl sulfate), and to form a stoichiometric polyion complex. Thus, colloidal titration with poly(vinyl sulfate) was applied to measure the zirconium concentration in an acidic solution by using a Toluidine Blue selective plasticized poly(vinyl chloride) membrane electrode as a potentiometric end-point detecting device. The determination could be performed with 1% of the relative standard deviation. The colloidal titration stoichiometry at pH < or = 2 was one mol of zirconium per equivalent mol of poly(vinyl sulfate).

Journal Article↗

Ellipsometric in vitro studies on blood plasma and serum adsorption to zirconium.

Ellipsometry/antibody techniques were used to study the adsorption of heparinized human blood plasma and serum onto spontaneously oxidized zirconium, and a colorimetric assay measured the formation of kallikrein by the surface in citrated plasma. After 10 min incubation in the blood plasma the protein film thickness was approximately 4.2 nm, and the film bound polyclonal antibodies mainly against high molecular weight kininogen (HMWK), immunoglobulin G (IgG) and fibrinogen. After 5 or 60 min of incubations in whole normal or EGTA sera, antibodies against complement factor 3 (C3) and complement factor 3d (C3d) deposited to the surface. Factor H and complement factor 1q (C1q) were detected similarly after 1 and 5 min of incubation in 1-10% normal serum in veronal buffer, respectively. The indications are that upon contact with blood plasma, zirconium activates the intrinsic pathway of coagulation and is opsonized with C3. The failure to detect properdin and transient presence of factor H at the surface suggest that complement binds to zirconium although the activation becomes quickly down-regulated.

Adsorption↗

Synthesis, physicochemical characterization, and cytotoxic screening of new zirconium complexes with coumarin derivatives.

Zirconium complexes of mendiaxon, warfarin, coumachlor, and niffcoumar have been synthesized by reaction of the ligands with zirconium chloride in stoichiometric ratio 1:2. The formation of the complexes has been proved on the basis of elemental analysis, IR-spectroscopy, 1H-NMR spectroscopy, and thermal studies. Differential thermal analyses and thermogravimetric analyses have been applied to study the compositions of the new complexes. It is concluded that the lactone- and the keto-carbonyl groups of warfarin, coumachlor, and niffcoumar are bonded to the metal ion as bidentate ligands, but mendiaxon is bonded as monodentate ligand. Cytotoxic screening by MTT-assay was carried out. Among these compounds the zirconium complex of mendiaxon showed highest cytotoxic activity against human promyelocytic leukemic HL-60 cells. The inorganic salt was found to be active against this cell line.

Antineoplastic Agents↗

Mass spectrometric investigation of gallium and zirconium complexes with octaethylporphyrin and tetraphenylporphyrin.

Gallium and zirconium octaethylporphyrin (OEP) and tetraphenylporphyrin (TPP) were examined by electrospray ionization (ESI) mass spectrometry. All systems were prepared in dichloromethane with addition of a stabilizing lipophilic anionic agent, sodium tetrakis[3,5-bis(trifluoromethyl)phenyl]borate (NaTFPB). In the solutions examined both monomeric and dimeric metalloporphyrins were observed. In the gallium-OEP mass spectrum the ion registered at m/z 601 was attributed to monomeric [Ga(OEP)](+) and that at m/z 1219 to the dimeric form, [[Ga(OEP)](2)OH](+). Peaks appearing in the ESI mass spectra of zirconium systems were substantially less intense, probably owing to the relatively low stability of complexes of this metal caused by its different geometry preferences. The most abundant monomeric zirconium-OEP complexes were [[Zr(OEP)OH]](+) (m/z 639) and [Zr(OEP)Cl](+) (m/z 657), and dimeric [[Zr(OEP)OH](2)](2+) (m/z 639). Analogous species were observed in the Zr(TPP) system: monomeric [[Zr(OEP)OH]](+) (m/z 719) and [Zr(TPP)Cl](+) (m/z 737) and dimeric [[Zr(TPP)OH](2)](2+) (m/z 719). In both cases series of other dimers, e.g. [[Zr(OEP)](2)O(2)H](+) (m/z 1277), [[Zr(OEP)OH](2)Cl](+) (m/z 1313), [Zr(TPP)(2)O(2)H](+), (m/z 1437), [[Zr(TPP)OH](2)OH](+) (m/z 1455) and [[Zr(TPP)OH](2)Cl](+) (m/z 1473), appeared. The results obtained confirmed the hypothesis concerning the formation of dimeric metalloporphyrins in solutions containing stabilizing lipophilic anions. It also allowed us to explain the super-Nernstian slopes of the calibration curves towards primary anions of ion-selective electrodes with membranes containing the examined metalloporphyrins.

Gallium↗

Zirconium phosphate dispersed on a cellulose fiber surface: preparation, characterization, and selective adsorption of Li+, Na+, and K+ from aqueous solution.

Highly dispersed zirconium phosphate was prepared by reacting Cel/ZrO(2) (ZrO(2)=6.7 wt%; 0.56 mmol g(-1) of zirconium atom per gram of the material) with phosphoric acid. High power decoupling magic angle spinning (HPDEC-MAS)(31)P NMR and X-ray photoelectron spectroscopy data indicated that HPO(2-)(4) is the species present on the fiber surface. The X-ray diffraction patterns showed that zirconium hydrogen phosphate particles were amorphous and had an ion-exchange capacity, determined by ammonia gas adsorption, of 0.30 mmol g(-1). The ion-exchange capacities for Li(+), Na(+), and K(+) ions were determined from ion-exchange isotherms at 298 K and showed the following values (in mmol g(-1)): Li(+)=0.01, Na(+)=0.23, and K(+)=0.30. The higher affinity of the surface hydrogen phosphate particles for Na(+) and K(+) is due to its lamelar structure which permits easier diffusion of these two ions whose hydrated radii are smaller than that of Li(+).

Adsorption↗

Interaction between two group IV metals--lead and zirconium--in bone marrow cells of Mus musculus in vivo.

The interaction between two group IV metals, the highly toxic lead and the relatively inactive and low toxic zirconium, was studied in the bone marrow chromosomes of Mus musculus in vivo. Low and high doses of zirconium oxychloride were fed orally to the experimental mice (i) 2 h before, (ii) 2 h after or (iii) together with different doses of lead nitrate. Protection against lead-induced clastogenicity was observed only when the lower dose of zirconium was administered prior to lead. All other combinations gave an additive or synergistic effect as was seen by significant increases in the frequencies of chromosomal aberrations.

Animals↗

Use of ultrasonic nebulizer with desolvator membrane for the determination of titanium and zirconium in human serum by means of inductively coupled plasma--mass spectroscopy.

A technique for the determination of titanium and zirconium in human blood serum, after pressurized digestion utilizing ICP-MS coupled to an ultrasonic nebulizer (USN) and desolvating membrane is described. As no CRM for titanium is available, zirconium has been determined in order to demonstrate the accuracy of the technique, as the limits in blood are well known. Bone cement consists basically of a polymer, namely polymethylmethacrylate (PMMA). For better X-ray contrast some manufacturers use incorporated ZrO2 with a volume fraction of 10 to 15%. Thus, the zirconium present in the PMMA matrix can be used as an indicator for the PMMA particulate debris.

Bone Cements↗

Interface analysis of titanium and zirconium bone implants.

A thin layer of titanium or zirconium was evaporated onto the surface of a plastic implant which was then inserted in the rabbit tibial metaphysis for six months. The implants and surrounding bone were cut out en bloc and sectioned for phase contrast microscopy, scanning- and transmission-electron microscopy. The intact bone-to-metal interface in the case of titanium revealed a fibrous tissue-free boundary zone with a 200-400 A thick proteoglycan coat immediately adjacent to the titanium oxide. Thereafter collagen filaments were seen and, at approximately 1000 A from the interface, collagen bundles. The tissues surrounding the zirconium-coated implant consisted of a 300-500 A thick proteoglycan layer, followed by a zone with collagen filaments and collagen bundles, not closer to the zirconium oxide than a few thousand A.

Animals↗

Zirconium molybdate gel as a generator for technetium-99m--II. High activity generators.

The characteristics of zirconium molybdate gels were described in Part I of this paper. Here it is shown that zirconium molybdate gel, prepared from neutron irradiated molybdenum oxide with 99Mo specific activities between 4.3 and 13.5 GBq g-1 is sufficiently stable for use as a matrix in preparation of high activity 99mTc generators. Elution efficiencies of generators containing from 2 to 6 g of gel ranged from 83 to 50% for 10 mL elutions. Generators containing 150 g of gel were eluted with efficiencies of 80-98%, with the activity peak in the first 50 mL. Radionuclidic impurities were considerably below the limits set by the British Pharmacopoeia. Although the pH of eluates was less than 4, subsequent treatment with a small zirconium oxide bed provided adjustment to within BP limits, and reduced 99Mo impurity levels tenfold to values near 10(-4)%. No significant differences were found between the biodistributions in rats of radiopharmaceuticals prepared with pertechnetate from gel generators and those from other generators.

Animals↗

Dehydration of fructose to 5-hydroxymethylfurfural in sub-critical water over heterogeneous zirconium phosphate catalysts.

Dehydration of fructose to 5-hydroxymethylfurfural in a batch-type process with sub-critical water (sub-CW) was performed in the presence of different laboratory-made zirconium phosphate solid acids at 240 degrees C. A direct relation was found between increasing the crystallinity and decreasing the surface area of solid acids. However, irrespective of the different surface areas, similar catalytic behaviors were observed. Meanwhile, calcination of the samples showed no improvement in the activity of the solid acids. In the presence of the amorphous form of zirconium phosphate, about 80% of fructose was decomposed in sub-critical water at 240 degrees C after 120 s, and the selectivity of the dehydration reaction of fructose to 5-hydroxymethylfurfural rose to 61%. No rehydration products were identified. Soluble polymers and furaldehyde were the only major and minor side products found, respectively. Finally it was found that zirconium phosphate solid acids were stable under sub-CW conditions, and they can easily be recovered without changing their catalytic properties.

Acids↗