Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Tragacanth”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources

The influence of acetylsalicylic acid, phenylbutazone, indomethacin, and flufenamic acid on the kinetics of leucocytes during acute inflammation.

Five groups of ten male Wistar rats each were used for the purpose of this experiment. All subjects suffered from sterile acute inflammation in the peritoneal cavity. A sterile beef heart infusion broth reinforced with proteose-peptone was injected to cause the inflammation. The following substances mixed with tragacanth gum were given orally at in 12 h intervals: --Acetalsalicylic acid 150 mg/kg body weight to the first group; --Phenylbutazone 100 mg/kg body weight to the second group; --Indomethacin 15 mg/kg body weight to the third group; --Flufenamic acid 100 mg/kg body weight to the fourth group. Finally the fifth group received only tragacanth gum. The rats were sacrificed after 48 hours and leucocytes were collected from the peritoneal cavity by washing with 5 ml 0.9% NaCl solution. The total leucocyte number and the percent of each type were estimated for each group individually. A statistically significant decrease in the number of leucocytes migrated to the peritoneal cavity due to the inflammation was observed in rats that received one of the drugs (group I to IV) when compared to rats that received only the excipient (group V). Likewise, significant differences were noted in the composition of each type.

Analgesics↗

Microbiological quality of pharmaceutical raw materials.

A total of 115 samples of pharmaceutical raw materials (excipients) were analysed: 36 lactose, 27 talc, 19 corn starch, 18 arabic gum, 8 gelatin, 3 gelatinized starch, 3 cellulose and one tragacanth gum. 69.9% of the samples showed less than 10(2) bacteria/g (mean = 23.2 cfu/g) and 95.2% less than 10(2) fungi/g (mean = 4.92 cfu/g). Arabic and tragacanth gum were the most contaminated products by bacteria and fungi, respectively. Pregelatinized starch, cellulose and lactose were the least contaminated excipients. In none of the samples Escherichia coli or Salmonella-Shigella were detected; however, strains of Enterobacter, Serratia and Proteus were isolated from 10 samples of 5 different excipients. Only 5 samples did not comply with the microbiological standards as established by the European Pharmacopoeia and USP.

Drug Contamination↗

Variations of the digestive absorption kinetics of carbaryl with the nature of the vehicle.

Blood kinetics of 1-naphthyl-N-methyl[14C] carbamate were determined after intravenous injection in DMSO, and after intragastric and intraduodenal administration in DMSO, oil, gum tragacanth and milk. The acetylcholinesterase inhibition and the level of 14C-activity were both determined in the blood over various periods of time. The values of the absorption rate constants after intragastric and intraduodenal administration were found to be: 0.5 h(-1) and 7 h(-1) with DMSO, 0.6 h(-1) and 0.42 h(-1) with oil, 0.13 h(-1) and 0.22 h (-1) with gum tragacanth and 0.10 h(-1) with milk. Appearance of the toxic effect (the inhibition of the acetylcholinesterases) was closely related to the absorption rate constants which themselves depend on the administration vehicle employed.

Animals↗

Characterisation of natural polysaccharides (plant gums) used as binding media for artistic and historic works by capillary zone electrophoresis.

The monosaccharide constituents of plant gums were separated by capillary electrophoresis at pH 12.1 and detected with indirect UV absorbance. The plant gums investigated were gum arabic, gum acacia, gum tragacanth, cherry gum and locust bean gum (carob gum). The monosaccharides obtained after hydrolysis with 2M trifluoroacetic acid and lyophilisation of the hydrolysate were arabinose, galactose, mannose, rhamnose, xylose, fucose, and glucose, and the two sugar acids galacturonic and glucuronic acid, in accordance with the literature. They were separated in a background electrolyte consisting of NaOH to adjust the pH, 20 mM 2,6-pyridinedicarboxylic acid as chromophore for detection and 0.5 mM cetyltrimethylammonium bromide as additive to reverse the electroosmotic flow. Based on their electropherograms, the plant gums could be identified by their typical composition (depicted in a decision scheme) as follows: a peak of glucuronic acid, together with that of rhamnose, is indicative for gum arabic. Peaks of galacturonic acid and fucose point to gum tragacanth. Locust bean gum shows a major peak for mannose (with the concomitant galactose peak in ratio 4-1), whereas a glucuronic acid and a mannose peak together with a prominent arabinose peak indicates cherry gum. The method was applied to identify the plant gums in samples like watercolours and in several paint layers like gum tempera or those with egg white or drying oils as additives. Artificial aging experiments of thin layers of gum arabic on paper or glass carried out with UV-A radiation (366 nm) did not result in changes of the saccharide patterns, in contrast to the simultaneously conducted aging of a drying oil layer.

Art↗

Ion chromatography characterization of polysaccharides in ancient wall paintings.

An analytical procedure for the characterisation of polysaccharides and the identification of plant gums in old polychrome samples is described. The procedure is based on hydrolysis with 2 M trifluoroacetic acid assisted by microwaves (20 min, 120 degrees C, 500 W), clean-up of the hydrolysate by an ion-exchange resin, and analysis by high-performance anion-exchange chromatography with pulsed amperometric detection. Using this method the hydrolysis time was reduced to 20 min and the chromatographic separation of seven monosaccharides (fucose, rhamnose, arabinose, galactose, glucose, mannose, xylose) and two uronic acids (galacturonic and glucuronic) was achieved in 40 min. The whole analytical procedure allows sugar determination in plant gums at picomole levels, with an average recovery of 72% with an RSD of 8% as tested on arabic gum. The analytical procedure was tested with several raw gums, watercolour samples and reference painting specimens prepared according to old recipes at the Opificio delle Pietre Dure of Florence (Italian Ministry of Cultural Heritage, Italy). All the data collected expressed in relative sugar percentage contents were submitted to principal components analysis for gum identification: five groups were spatially separated and this enabled the identification of arabic, tragacanth, karaya, cherry+ghatty, and guar+locust bean gum. Wall painting samples from Macedonian tombs (Greece) of the 4th-3rd Centuries B.C., processed by the suggested method, showed the presence of a complex paint media mainly consisting of tragacanth and fruit tree gums. Moreover, starch had probably been added to plaster as highlighted by the presence of a huge amount of glucose.

Art↗

Mode of action of xylogalacturonan hydrolase towards xylogalacturonan and xylogalacturonan oligosaccharides.

XGH (xylogalacturonan hydrolase; GH 28) is an enzyme that is capable of degrading XGA (xylogalacturonan), which is a polymer of alpha-D-galacturonic acid, highly substituted with beta-D-xylose. XGA is present in cell walls of various plants and exudates, such as gum tragacanth. XGA oligosaccharides were derived from an XGH digestion of gum tragacanth, then fractionated, and analysed for their sugar composition and structure by matrix-assisted laser-desorption ionization-time-of-flight MS and nanospray MS. Several oligosaccharides from XGA were identified with different galacturonic acid/xylose ratios including five oligosaccharide isomers. Although XGH can act as an endo-enzyme, product-progression profiling showed that the disaccharide GalAXyl was predominantly produced from XGA by XGH, which indicated also an exolytic action. The latter was further supported by degradation studies of purified oligosaccharide GalA4Xyl3. It was shown that XGH acted from the non-reducing end towards the reducing end of this oligosaccharide, and showed the processive character of XGH. The results from this study further show that although XGH prefers to act between two xylosidated GalA units, it tolerates unsubstituted GalA units in its -1 and +1 subsites.

Carbohydrate Conformation↗

Dietary fiber: in vitro methods that anticipate nutrition and metabolic activity in humans.

Gravimetric measurement of dietary fiber (DF) gives no indication of the biological function of any particular fiber. This study describes simple methods based on dialysis and fermentation that enable a hierarchy of fibers to be described for each of the major actions of fiber along the gastro-intestinal tract: nutrient absorption, sterol metabolism, cecal fermentation, and fecal bulking. These results were compared with previous metabolic studies with the same fiber isolates in humans. DF that modifies nutrient absorption can be identified by using dialysis studies, whereas identifying DF that modifies sterol metabolism, cecal fermentation, and fecal weight requires formulas that incorporate dialysis and fermentation results. Results from dialysis and fermentation predicted the action of wheat bran, pectin, guar, gum arabic, carboxymethylcellulose, gellan, tragacanth, xanthan, and karaya in humans and generated anomalous results for karaya and tragacanth. These methods could form the basis of techniques that would enable a screening of novel and processed fibers before studies in animals, including humans.

Bile Acids and Salts↗

Some emulsifying and suspending properties of a polysaccharide gum derived from Mucuna flagillepes, Papilionaceae.

The emulsifying and suspending properties of a new polysaccharide gum derived from an edible bean, Mucuna flagillepes have been investigated. The stability of the emulsion prepared with the gum was compared with that of emulsions prepared with acacia or tragacanth. Sherman's equations for concentrated emulsions were applied to determine the rate of coalescence k, and changes in mean cube globule diameter. Suspensions of sulphdimidine or zinc oxide prepared with tragacanth gum were compared with those prepared with mucuna gum. The final sedimentation height, Hu for each suspension was predicted using a biexponential relationship in the sedimentation pattern. The indication is that mucuna gum can be usefully employed as both an emulsifying and a suspending agent.

Chemistry, Pharmaceutical↗

Fermentation of polysaccharides by Klebsielleae and other facultative bacilli.

Fermentations of 10 polysaccharides by species of the family Enterobacteriaceae were examined. Algin, guar, karaya, xanthan, and xylan were not fermented by any of the strains tested. Most of the activity was found in the tribe Klebsielleae. Klebsiella oxytoca fermented amylopectin (97% of the strains studied), carrageenan (100%), inulin (68%), polypectate (100%), and tragacanth (100%). Klebsiella pneumoniae fermented amylopectin (91%), carrageenan (100%), and tragacanth (86%). Carrageenan was also fermented by Enterobacter aerogenes (100%), Enterobacter agglomerans (63%), Enterobacter cloacae (95%), and Pectobacterium (38%). Pectobacterium shared polypectate fermentation (100%) with K. oxytoca. With one exception, Serratia strains were negative on all polysaccharides. These results, along with other evidence, indicate that (i) the genus Klebsiella is biochemically the most versatile genus of the tribe, (ii) because of its distinct characteristics, K. oxytoca warrants species designation separate from K. pneumoniae, and (iii) some food additives generally considered indigestible can be metabolized by a few species of facultative bacilli, whereas others appear to be resistant.

Enterobacteriaceae↗

Design and evaluation of 1- and 3-layer matrices of verapamil hydrochloride for sustaining its release.

The present study was performed to design oral controlled delivery systems for the water-soluble drug, verapamil hydrochloride, using natural and semisynthetic polymers as carriers in the forms of 1- and 3-layer matrix tablets. Verapamil hydrochloride 1-layer matrix tablets containing hydroxypropylmethylcellulose, tragacanth, and acacia either alone or mixed were prepared by direct compression technique. 3-layer matrix tablets were prepared by compressing the polymers as release retardant layers on both sides of the core containing the drug. The prepared tablets were subjected to in vitro drug release studies. Tragacanth when used as the carrier in the formulation of 1- and 3-layer matrices produced satisfactory release prolongation either alone or in combination with the other 2 polymers. On the other hand, acacia did not show enough prolonging efficiency in 1- and 3-layer matrix tablets. The results also showed that the location of the polymers in the 3-layer tablets has a pronounced effect on the drug release. Kinetic analysis of drug release from matrices exhibiting sustained release indicated that release was predominantly attributable to the contribution made by Fickian diffusion, while the erosion/relaxation mechanisms had a minor role in the release.

Chemistry, Pharmaceutical↗

Exudate gums: occurrence, production, and applications.

This paper presents a review of the industrially most relevant exudate gums: gum arabic, gum karya, and gum tragacanth. Exudate gums are obtained as the natural exudates of different tree species and exhibit unique properties in a wide variety of applications. This review covers the chemical structure, occurrence and production of the different gums. It also deals with the size and relative importance of the various players on the world market. Furthermore, it gives an overview of the main application fields of the different gums, both food and non-food.

Food Additives↗

A method for testing denture adhesives.

An in vitro test is described that simulates the in vivo fate of a denture adhesive, namely destruction, dilution, and dissolution of the adhesive, by repeated measurement of tensile bond strength for the adhesive in isotonic saline over time. The bond strengths were measured under two different settings of the testing machine. The main compositions of three denture adhesive pastes, Fittydent, Fixodent, and Super Poli-Grip and one powder adhesive, Super Wernet's, were determined by infrared spectroscopy. The tensile bond strengths of these adhesives and those of pure tragacanth gum were subjected to a three-way analysis of variance. The Fittydent and Super Poli-Grip adhesives exhibited the best results over time. The most appropriate of the described methods for testing denture adhesives seem useful; however, when seen in relation to the results of a published clinical study where the patients were asked to evaluate the retention and the duration of some of these adhesives, there are indications that the clinical validity of the method might be improved if paste adhesives are tested at temperatures above 35 degrees C.

Adhesives↗

Nitrogen conversion factors for the proteinaceous content of gums permitted as food additives.

Nitrogen conversion factors for gum arabic (Acacia senegal (L.) Willd.), gum tragacanth (Asiatic Astragalus spp.), gum karaya (Sterculia spp.), guar gum (Cyamopsis spp.), locust bean (carob) gum (Ceratonia spp.), tara gum (Caesalpinia spp.), and xanthan gum (Xanthomonas campestris) have been calculated from data for the amino acid compositions of their proteinaceous components. The factors derived differ from the arbitrary values (5.7 or 6.25) at present specified by international regulatory authorities for some emulsifiers, stabilizers and thickeners.

Dietary Proteins↗

Polymers for sustained release formulations of dipyridamole-alginate microspheres and tabletted microspheres.

The preparation of dipyridamole (DIP) alginate (alg) microspheres by different methods or the incorporation of tragacanth (trgh), pectin or Eudragit L-100 55 (Eud) in alg microsphere formulations did not provide a prolonged release of DIP at pH 1.2. Tabletted microsphere formulations containing alg, trgh, pectin, sodium carboxymethyl cellulose (CMC), sodium starch glycolate (SSG), carrageenan (carrg) or Eud as diluents in different ratios, produced tablets with good physical properties which did prolong DIP release. The type, viscosity and the ratio of the diluent polymer, microsphere size and the compression pressure were found to be important factors to produce tablets with desired properties. No advantage of the tablets containing alg microspheres and granulated diluents was observed over the tablets containing powdered diluents.

Alginates↗

Utilization of medium-chain triglycerides by neonatal pigs: effects of emulsification and dose delivered.

Four trials were conducted using 86, 24-h-old pigs to evaluate the utilization of medium-chain triglycerides (MCT). Effects of emulsification and amount of MCT fed were examined. After a 4-h period during which feed was withheld, pigs were force-fed MCT (containing 75% octanoate and 25% decanoate), marking time 0 of the experiment. Blood samples were obtained at 1 and 2 h for subsequent medium-chain fatty acid (MCFA) analysis. In Trials 1 (six pigs/treatment) and 2 (four pigs/treatment) the response to three emulsifying agents was compared to a nonemulsified (NE) control. Twenty milliliters of a 30% (vol/vol) emulsion of MCT or 6 mL of NE MCT was administered. Concentrations of MCFA at 1 h in pigs receiving a Tween 80 (polyoxy-ethylene [20] sorbitan monooleate) emulsion were 3- to 19-fold higher than concentrations in animals administered a gum arabic/gum tragacanth emulsion, a lecithin emulsion, or NE MCT. Trials 3 (eight pigs/treatment) and 4 (six pigs/treatment) were conducted to determine the plasma MCFA concentrations resulting from feeding increasing levels of NE (3, 6, 9, or 12 mL of MCT) or emulsified MCT oil (2, 4, 6, or 8 mL in a 30% Tween 80 emulsion). Plasma octanoate concentrations measured at 1 h increased linearly (P < .05) with increasing MCT dosage through 9 mL of NE and 6 mL of emulsified MCT. A transient narcosis was observed in 8 of 12 animals that received 6 or 8 mL of emulsified MCT and was most pronounced 1 to 2 h after feeding, which roughly corresponded to peak plasma MCFA concentrations.(ABSTRACT TRUNCATED AT 250 WORDS)

Animals↗

Intratesticular injection as a method to assess the potential toxicity of various agents and to study mechanisms of normal spermatogenesis.

To better understand, to optimize, and to validate the technique of intratesticular (i.t.) injection, several parameters related to i.t. injection were examined. Volumes exceeding 50 microliters could be injected i.t.; however, testes frequently became excessively turgid and backflow of injected fluids occurred. Thus, a volume of 50 microliters or less was deemed optimal for injection. To determine the rate of distribution of substances throughout the testis, trypan blue was injected i.t. near the caudal pole of the testis, and the movement of dye was monitored. Within 2 min, the dye had spread approximately 1 cm from the site of injection, and in 5 min it had spread twice that distance. In 2 h, the dye had become distributed throughout the testis except at its extreme cranial pole. Seminiferous tubules did not take up dye, indicating that the spread of dye was via peritubular lymphatics. Seminiferous tubule histology appeared virtually unaffected by i.t. injection, even at regions adjacent to the site of injection, when a sterile 26-gauge or smaller bore needle was utilized. To determine disappearance from the testis, radiolabeled inulin was injected i.t. Half time for absorption was achieved at 1.75 h. Potential vehicles were explored in which compounds with a variety of physical properties could be injected. Gum tragacanth, normal saline, ethylene glycol, dimethyl sulfoxide (DMSO) mixed 1:1 with normal saline, sesame oil, and propylene glycol were found to be suitable injection vehicles, whereas ethanol, dissolved in normal saline in concentrations as low as 0.5% was found unsuitable. To assess vehicle efficiency, various vehicles were utilized with a known testicular toxin (taxol) and injected into one testis, and the histology was compared with the contralateral testis injected with vehicle alone. All vehicles, found suitable above, allowed dispersion of taxol to influence areas distant from the site of injection. Intratesticular injection assesses the potential of agents to directly affect the testis, and systemic metabolism is avoided. Their rapid spread throughout the lymphatics of the testes allows seminiferous tubules to be exposed to agents in innocuous vehicles more rapidly and in higher concentration than is often possible when using systemic injections.

Alkaloids↗

Biological activity of some naturally occurring resins, gums and pigments against in vitro LDL oxidation.

Naturally occurring gums and resins with beneficial pharmaceutical and nutraceutical properties were tested for their possible protective effect against copper-induced LDL oxidation in vitro. Chiosmastic gum (CMG) (Pistacia lentiscus var. Chia resin) was the most effective in protecting human LDL from oxidation. The minimum and maximum doses for the saturation phenomena of inhibition of LDL oxidation were 2.5 mg and 50 mg CMG (75.3% and 99.9%, respectively). The methanol/water extract of CMG was the most effective compared with other solvent combinations. CMG when fractionated in order to determine a structure-activity relationship showed that the total mastic essential oil, collofonium-like residue and acidic fractions of CMG exhibited a high protective activity ranging from 65.0% to 77.8%. The other natural gums and resins (CMG resin 'liquid collection', P. terebinthus var. Chia resin, dammar resin, acacia gum, tragacanth gum, storax gum) also tested as above, showed 27.0%-78.8% of the maximum LDL protection. The other naturally occurring substances, i.e. triterpenes (amyrin, oleanolic acid, ursolic acid, lupeol, 18-a-glycyrrhetinic acid) and hydroxynaphthoquinones (naphthazarin, shikonin and alkannin) showed 53.5%-78.8% and 27.0%-64.1% LDL protective activity, respectively. The combination effects (68.7%-76.2% LDL protection) of ursolic-, oleanolic- and ursodeoxycholic- acids were almost equal to the effect (75.3%) of the CMG extract in comparable doses.

Cholesterol, LDL↗

Evaluation of the aneugenic potential of the fungicide Ferbam in mice.

Ferbam, a potent dithiocarbamate fungicide is used as a protectant against a wide variety of fungal diseases in fruits, vegetables, and ornamental plants. The wide-spread use of this chemical is likely to pollute the environment. Hence, it was planned to test the possible genotoxicity of Ferbam through its aneugenic potential in the in vivo mouse (Mus musculus) test system. Four different doses of Ferbam, namely, 7.5, 15.0, 30.0, 60.0 mg/kg body weight were administered orally to mice Mus musculus suspended in gum tragacanth representing, respectively, 1/16, 1/8, 1/4;, 1/2 th of the LD50 value. They were sacrificed at 6-, 12-, 24-, and 48-h intervals along with a distilled water negative control at 2 mg/kg body weight. Colchicine treated animals were used as positive controls. Bone marrow preparations were made following the standard Hypotonic flame dry Giemsa staining technique to study the dose and time yield effect of Ferbam. The aneugenic potential was evaluated for C-mitotic effects by scoring the mitotic index, c-mitoses frequency, anaphase reduction, and hyper/hypodiploidy induction. Ferbam showed a significant increase in the mitotic index and C-mitoses effects and anaphase decreased at the highest doses of 30 and 60 mg/kg at 12- and 24-h intervals. Colchicine induced significant effects in all the aneugenic parameters observed at all the time intervals. There was no significant induction of either hyperdiploidy or hypodiploidy by Ferbam, unlike colchicine, indicating that the fungicide Ferbam is not aneugenic in the mouse test system.

Anaphase↗