Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Thermal analysis”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources
PubMed1981

[Stability testing of solid drugs using preferentially thin-layer chromatography and differential thermal analysis. Part 7: The stability of drugs and preparations (author's transl)].

Beside the temperature etc., certain properties of the crystal surface, the water content, catalytic actions and possible oxidation processes determine the stability of solids. Stability testing of drugs (aiming at fixing time-limits for the storage of drugs) according to the schedule elaborated by the authors provides specific quantitative methods of analysis only for substances of relatively poor storage stability. Already two or three temperature-time experiments (12h/140 degrees C; 20 d/90 degrees C; 43 d/80 degrees C) permit to evaluate the stability of the drugs by thin-layer chromatography and differential thermal analysis. Almost 80% of the substances tested comply with the prerequisites for the recommendation of a time-limit of 10 years for storage.

Catalysis↗
PubMed1982

The use of differential scanning calorimetry and differential thermal analysis in studies of model and biological membranes.

Differential scanning calorimetry (DSC), and to a lesser extent differential thermal analysis (DTA), are powerful yet relatively rapid and inexpensive thermodynamic techniques for studying the thermotropic phase behavior of lipids in model and biological membranes, without the introduction of exogenous probe molecules. In this review the principles as well as the scope and limitations of DSC and DTA are discussed first. The application of these techniques to the study of the thermotropic phase behavior of aqueous dispersions of various single synthetic phospholipids are then summarized, and the effects of cholesterol, free fatty acids, lysophospholipids, drugs, anesthetics and proteins on the gel to liquid-crystalline phase transitions exhibited by these model systems are discussed. The phase mixing properties of model membranes consisting of mixtures of two or more synthetic or natural phospholipids are considered next. Finally, the thermotropic phase behavior of prokaryotic plasma membranes and of the plasma, microsomal and mitochondrial membranes of eukaryotic cells are reviewed, and the applications of DSC and DTA to study the thermal behavior of specific membrane proteins, as well as the physical properties of the membrane lipid phase, are summarized.

Acholeplasma laidlawii↗
PubMed2000

Intermediate state during the crystal transition in aspartame, studied with thermal analysis, solid-state NMR, and molecular dynamics simulation.

Aspartame (L-alpha-aspartyl-L-phenylalanine methyl ester) is a dipeptide sweetener about 200 times as sweet as sugar. It exists in crystal forms such as IA, IB, IIA, and IIB, which differ in crystal structure and in the degree of hydration. Among these, IIA is the most stable crystal form, and its crystal structure has been well determined (Hatada et al., J. Am. Chem. Soc., 107, 4279-4282 (1985)). To elucidate the structural factors of thermal stability in the IIA form of aspartame and to examine the physical process in the crystal transformation between the IIA and IIB forms, we performed a thermal analysis and solid-state NMR measurements. We found that a quasi-stable intermediate state exists in the transformation, and it has the same crystal lattice as the usual IIA form, despite the dehydration from 1/2 mol to 1/3 mol per 1 mol of aspartame. The results of the energy component analysis and the molecular dynamics simulation suggest that the entropic effect promotes the generation of the intermediate state, which is presumably caused by the evaporation of the water of crystallization and the increase of molecular motion in aspartame. Thus, the thermal stability of the IIA form is attributable to a structural property, i.e., the crystal lattice itself is retained during the above dehydration. Moreover, the molecular dynamics simulations suggest that the aspartame molecules have two kinds of conformational flexibility in the intermediate state.

Aspartame↗
PubMed1997

In vitro human skin barrier modulation by fatty acids: skin permeation and thermal analysis studies.

PURPOSE: This study aims to elucidate the skin permeation enhancement and the skin perturbation effects of a number of fatty acids, i.e. straight-chain saturated (SFA), monounsaturated (MUFA) and polyunsaturated acids (PUFA). METHODS: The skin permeation enhancement effects were studied using human stratum comeum (SC) and p-aminobenzoic acid (PABA) as a model permeant. The fatty acids in propylene glycol (FA/PG) were applied according to a pre-treatment/co-treatment protocol. The perturbation effects were studied using differential thermal analysis (DTA) on SC after pretreatment with FA/PG. RESULTS: SFA with 6 to 12 carbons exhibit a parabolic correlation between enhancement effect and chain-length, with a maximum at nonanoic-decanoic acids (with 9 and 10 carbons). Nonanoic and decanoic acids exert barely noticeable effects on the thermal behaviour of SC, suggesting that they easily mix with the skin lipids. All cis-6-, 9-, 11- or 13-octadecenoic acids (MUFA) enhance the permeation of PABA to the same extent. DTA revealed that the cis-9- and 13-isomers form a separate domain containing mostly the pure fatty acids within the SC lipids and suppress the lipid transitions at 70 degrees/80 degrees C. PUFA--linoleic (LA), alpha-linolenic (ALA) and arachidonic acids--enhance PABA permeation stronger than MUFA but additional double bonds do not further increase the degree of enhancement. LA and ALA form separate domains but do not completely suppress the SC lipid transitions at 70 degrees/80 degrees C. Increase in the enthalpy changes of 70 degrees/80 degrees transitions linearly correlates to the decrease in the permeability coefficients, suggesting that an increased perturbation of the skin lipids not necessarily has to yield an increased PABA permeation. CONCLUSIONS: The enhancement effects of fatty acids on the PABA penetration through SC are structure-dependent, associated with the existence of a balance between the permeability of pure fatty acids across SC and the interaction of the acids to skin lipids.

4-Aminobenzoic Acid↗
PubMedDate not supplied

Thermal analysis of the plant encapsulation-dehydration cryopreservation protocol using silica gel as the desiccant.

The encapsulation-dehydration cryopreservation protocol is critically dependent upon the evaporative desiccation step, which must optimise survival with the retention of glass stability on sample cooling and rewarming. Desiccation is usually achieved evaporatively by drying in a sterile airflow. However, chemical desiccation using silica gel has advantages for laboratories that do not have environmental control and/or which are exposed to high relative humidities and risks of microbial contamination. This study characterised thermal profiles of silica gel-desiccated encapsulated shoot-tips of two Ribes species using Differential Scanning Calorimetry. For both species silica gel-desiccation at 16 degrees C for 5 h decreased bead water content from ca. 75 to 28% fresh weight (3.8 to 0.4 g x g(-1) dry weight); further desiccation (for 6 and 7 h) reduced the bead water content to 21% (0.3 g x g(-1) dry weight). These changes in water status altered the thermal properties of beads for both species. After 7 h desiccation over silica gel stable glass transitions were observed on both cooling and rewarming of beads containing meristems. Tg mid-point temperatures ranged from -78 to -51 degrees C (cooling) and from -88 to -54 degrees C (warming) [at cooling and warming rates of 10 and 5 degrees C min(-1), respectively] after 5 to 7 h silica gel-desiccation. Post-cryopreservation viability of both species was ca. 63%. Thermal analysis studies revealed that an encapsulation/dehydration protocol using silica gel as a desiccant should comprise a minimum 5 h drying (at 16 degrees C). This reduces bead moisture content to a critical point (ca. 0.4 g x g(-1) dry weight) at which stable glasses are formed on cooling and rewarming. It is concluded that silica gel has advantages for use as a desiccant for alginate-encapsulated plant meristems by promoting stable vitrification and is useful in laboratories and/or geographical locations where environmental conditions are not under stringent control.

Cell Survival↗
PubMed2005

Application of simultaneous thermal analysis mass spectrometry and stable carbon isotope analysis in a carbon sequestration study.

The simultaneous analysis of evolved gases and the determination of stable isotope composition (delta13C) as part of a thermal analysis experiment have been used to (a) distinguish bulk chemical hosts for carbon (C) and nitrogen (N) within a soil and (b) track labelled C within a soil sequestration experiment. C3 and C4 dung was applied to a pasture soil, and soil samples taken for analysis. The results of thermogravimetry-differential scanning calorimetry-quadrupole mass spectrometry-isotope ratio mass spectrometry (TG-DSC-QMS-IRMS) show that the proportion of more refractory C (lignin-like) is greater for the dungs than for the soil organic matter (SOM), and that this increases with time within the soil. Analysis of evolved gases shows that nitrogen is associated with the decomposition of more refractory C, and is not so strongly associated with the labile C component. IRMS analysis distinguished C3 and C4 dung, and allowed the amount of C from these sources to be estimated for the soil samples. Most dung C enters the refractory SOM fraction. This paper demonstrates the potential of TG-DSC-QMS-IRMS in the investigation of SOM.

Carbon↗
PubMed1978

Thermal analysis of the spores of Bacillus cereus with special reference to heat activation.

The heat activation of bacterial spores was studied by means of differential thermal analysis in the temperature range 30-110 degrees C using the spores of Bacillus cereus. The thermogram showed three endothermic peaks at 56, 95, and 103 degrees C with one exothermic peak at 105 degrees C during the heating process. The spore coat separated from the native spores also showed a peak at 56 degrees C on its heating thermogram. The peak at 56 degrees C was reversible for both native spores and the spore coat. It was suggested that this peak at 56 degrees C might be related to the heat-activation process that takes place in the spore-coat region. It seems that the peak is due to the denaturation or the structural change of the spore-coat protein that might facilitate either the permeation of germination stimulators or the release of some germination inhibitor into or out of the spores.

Bacillus cereus↗
PubMed1981

Differential thermal analysis of dipalmitoylphosphatidylcholine--fatty acid mixtures.

Mixtures of dipalmitoylphosphatidylcholine (DPPC) with palmitic, stearic, and myristic acids and the sodium salts of these acids were analyzed by differential thermal analysis (DTA) over a wide range of lipid compositions, all in excess water. All three fatty acids raise the liquid-crystal phase transition temperature and form sharp-melting complexes, with 1:2 DPPC--fatty acid stoichiometry observed for palmitic and stearic acids and suggested for myristic acid. Phase diagrams of the peritectic type, indicating nonideal mixing, was fitted to the DPPC--palmitic acid and DPPC--stearic acid data. In contrast, DPPC forms nearly ideal mixtures with the putative DPPC--myristic acid complex. At levels of only a few mole percent, both sodium stearate and myristate remove the pretransition and main transition and produce new peaks at approximately 30 and approximately 48 degrees C; the relative areas of the new peaks were unreproducible for the DPPC--myristate system. Sodium palmitate is the least disruptive of any of the sodium soaps or fatty acids; up to 80 mol % palmitate, the transition is lowered 3 degrees C and approximately doubled in width. The pretransition is detectable up to 36 mol %, and the main transition persists up to 88 mol % palmitate. The apparent pK of palmitic acid (12 mol %) in DPPC bilayers was determined to be 10.2 by direct pH measurement of ternary DPPC mixtures with known palmitic acid/sodium palmitate ratios; the intrinsic pK is estimated to be less than or approximately 8.5.

Fatty Acids, Nonesterified↗
PubMed1989

Pressure study on thermal transitions of oleic acid polymorphs by high-pressure differential thermal analysis.

Transition temperatures for oleic acid polymorphs (alpha, beta and gamma) and the melt were measured under various pressures up to 200 MPa by means of high-pressure differential thermal analysis. The pressure dependences of the transition temperatures were analyzed by applying the Clapeyron equation, and the volume changes associated with the phase transitions were estimated as follows; delta V gamma-alpha = 5.9 cm3/mol, delta V alpha-melt = 29.2 cm3/mol and delta V beta-melt = 41.1 cm3/mol. The volume changes for the gamma-alpha and alpha-melt transitions were discussed in relation to the crystal structures of the alpha and gamma modifications. The experiments showed that the beta modification, whose structural data are lacking, is the most dense. This correlates with the fact that the beta form is thermodynamically most stable among the three modifications of oleic acid.

Alkanes↗
PubMed1996

Dynamic mechanical thermal analysis of denture soft lining materials.

The purpose of this study was to characterize the deformation properties of a range of long-term denture soft lining materials using dynamic mechanical thermal analysis. Specimens were subjected to sinusoidal shear deformation at a frequency of 1 Hz and a strain of 64 microns peak to peak over a temperature range of 30-70 degrees C. The technique simulated the type and rate of deformation soft lining materials would experience clinically, thus producing more relevant results than previously used methods. Shear modulus G', dissipative modulus G' and mechanical loss tangent G'/G' were obtained for each material. With increasing temperature the moduli of the acrylic materials decreased, indicating an increased compliance and greater deformation. The silicone (Molloplast B) and alternative formulation (Novus) properties were generally insensitive to temperature over the range chosen. The mechanical loss tangent values of the acrylics fell continuously with temperature, suggesting that the plasticization process lowered the Tg values below 30 degrees C, the lowest temperature of testing.

Acrylates↗
PubMed1998

Retention mechanism study of imidazole derivatives on a beta-cyclodextrin-bonded stationary phase. Thermal analysis contributions.

The high-performance liquid chromatography retention mechanism of a series of six imidazole derivatives was investigated over a wide range of mobile-phase compositions, pH, and column temperatures using a beta-cyclodextrin (beta-CD)-bonded chiral stationary phase. Thermodynamic constants for the transfer of a solute from the mobile to the beta-CD stationary phase were determined. Different van't Hoff plot shapes were observed with mobile-phase pH values, indicating a change in the retention mechanism. Enthalpy-entropy compensation revealed that the solute retention mechanism was independent of the compound molecular structure, the same at pH 7 and 7.5, but changed at pH 6.5, 8, and 8.5. Differential scanning calorimetry and thermogravimetric analysis were used to show different thermal features for the beta-CD stationary phase at pH 6.5, 8, and 8.5 and at pH 7 and 7.5. A new theory was presented to explain the beta-CD cavity structure balance between an ordered and disordered state. Variations of column temperature and mobile-phase pH tend to cause this phase transition between these two states, explaining the thermodynamic constant variations with pH and temperature.

Chromatography, High Pressure Liquid↗
PubMed2006

The potential role of dynamic thermal analysis in breast cancer detection.

BACKGROUND: It is presently well accepted that the breast exhibits a circadian rhythm reflective of its physiology. There is increasing evidence that rhythms associated with malignant cells proliferation are largely non-circadian. Cancer development appears to generate its own thermal signatures and the complexity of these signatures may be a reflection of its degree of development. The limitations of mammography as a screening modality especially in young women with dense breasts necessitated the development of novel and more effective screening strategies with a high sensitivity and specificity. The aim of this prospective study was to evaluate the feasibility of dynamic thermal analysis (DTA) as a potential breast cancer screening tool. METHODS: 173 women undergoing mammography as part of clinical assessment of their breast symptoms were recruited prior to having a biopsy. Thermal data from the breast surface were collected every five minutes for a period of 48 hours using eight thermal sensors placed on each breast surface [First Warning System (FWS), Lifeline Biotechnologies, Florida, USA]. Thermal data were recorded by microprocessors during the test period and analysed using specially developed statistical software. Temperature points from each contra-lateral sensor are plotted against each other to form a thermal motion picture of a lesion's physiological activity. DTA interpretations [positive (abnormal thermal signature) and negative (normal thermal signature)] were compared with mammography and final histology findings. RESULTS: 118 (68%) of participating patients, were found to have breast cancer on final histology. Mammography was diagnostic of malignancy (M5) in 55 (47%), indeterminate (M3, M4) in 54 (46%) and normal/benign (M1, M2) in 9 (8%) patients. DTA data was available on 160 (92.5%) participants. Using our initial algorithm, DTA was interpreted as positive in 113 patients and negative in 47 patients. Abnormal thermal signatures were found in 76 (72%) out of 105 breast cancer patients and 37 of the 55 benign cases. Then we developed a new algorithm using multiple-layer perception and SoftMax output artificial neural networks (ANN) on a subgroup (n = 38) of recorded files. The sensitivity improved to 76% (16/21) and false positives decreased to 26% (7/27) CONCLUSION: DTA of the breast is a feasible, non invasive approach that seems to be sensitive for the detection of breast cancer. However, the test has a limited specificity that can be improved further using ANN. Prospective multi-centre trials are required to validate this promising modality as an adjunct to screening mammography especially in young women with dense breasts.

Journal Article↗
PubMed1976

Differential thermal analysis of aluminum hydroxide gel.

The development of order during the aging of aluminum hydroxide gel prepared by the reaction of aluminum chloride and ammonium hydroxide to a final pH of 7.0 can be monitored by differential thermal analysis. The loss of acid reactivity upon aging is accompanied by an increase in the temperature and intensity of the dehydroxylation endotherm and an accompanying decrease in the intensity of the water of hydration endotherm. With continued aging, the thermogram develops the characteristics of a crystalline aluminum hydroxide.

Aluminum Hydroxide↗
PubMedDate not supplied

Thermal analysis of garlic shoot tips during a vitrification procedure.

The thermal behavior of garlic shoot tips was analyzed during the course of a vitrification protocol using the PVS3 vitrification solution. The size of shoot tips did not significantly influence the thermal behavior of garlic shoot tips. Though there was no significance, endo-thermal enthalpy from melting of crystalline ice increased as preculture duration increased to 6 days. Preculture on medium with 0.5 M sucrose significantly lowered exo- and endothermal enthalpies of dehydration-control shoot tips. By contrast, after dehydration with PVS3 solution, the concentration of sucrose in preculture medium had no significant effect on the value of enthalpies. A big thermal event was observed in garlic shoot tips air-dried for 1-3 h before dehydration. Both vitrification solution and dehydration duration significantly (P < 0.0001) influenced exo- and endothermal enthalpies. After dehydration with PVS1, PVS2, Fahy or Steponkus solutions for 120 min, only a small peak was detected in some shoot tips, but recovery of cryopreserved shoot tips was low. Dehydration duration with PVS3 solution significantly (P < 0.0001) influenced exo- and endothermal enthalpies and onset temperatures during cooling and warming. After dehydration for 150 and 180 min with PVS3 vitrification solution, no crystallization was observed during cooling and warming in most replicates, and recovery of cryopreserved shoot tips was highest (> 80%). There was a significant (P < 0.001) negative correlation between moisture content of shoot tips and concentration of sucrose and glycerol, and regeneration of cryopreserved shoot tips. By contrast, there was a significant (P < 0.001) positive correlation between MC and enthalpy of ice melting, and onset temperature of crystallization. Overall, the results of the analysis of the thermal behavior of garlic shoot tips coincide very well with their recovery after cryopreservation and provide a very useful tool for the establishment and optimization of cryopreservation protocols.

Cryopreservation↗
PubMed1987

Thermal analysis of the bone surface induced by laser radiation.

High energy laser has emerged to be an important surgical tool in medical technology. However, the application of laser energy to drill or cut a bone is still in an experimental state. In order to estimate the adequacy of laser heating of bone surface and at the same time minimize the damage to the bone tissue, we developed a mathematical model of the temperature distribution in bone due to laser irradiation. The thermal analysis shows that the temperature distribution depends on several parameters, including the density, the specific heat, and the thermal conductivity of the osseous tissue.

Bone and Bones↗
PubMed1994

Measurement of glass transition temperatures in freeze concentrated solutions of non-electrolytes by electrical thermal analysis.

The electrical resistance (R) of frozen aqueous solutions was measured as a function of temperature in order to determine whether this technique can be applied for determination of glass transition temperatures of maximally freeze concentrated solutions (Tg') of non-electrolytes which do not crystallize during freezing. Electrical thermal analysis (ETA) thermograms of frozen solutions containing the solute alone show a gradual change in slope over the temperature range of interest, with no inflection point which corresponds to Tg'. However, addition of low levels (about 0.1%) of electrolyte changes the shape of the thermogram into a biexponential function where the intersection of the two linear portions of the log (R) vs. T plot corresponds to the glass transition region. The total change in log (R) over the temperature range studied increases as the ionic radius of the reporter ion increases. The sharpest inflection points in the log (R) vs T curves, and the best correlation with DSC results, were obtained with ammonium salts. Tg' values measured by ETA were compared with values measured by DSC. DSC thermograms of solutes with and without electrolyte (0.1%) show that the electrolyte decreases Tg' by about 0.5 to 1.0 degrees C. However, Tg' values measured by ETA are somewhat higher than those measured by DSC, and difference between the two methods seems to increase as Tg' decreases. Tg' as measured by ETA is less heating rate dependent than DSC analysis, and ETA is a more sensitive method than DSC at low solute concentrations and at low heating rates.(ABSTRACT TRUNCATED AT 250 WORDS)

Calorimetry, Differential Scanning↗
PubMed1995

Use of thermal analysis to distinguish magnesium and calcium stimulated ATPase activity in isolated transverse tubules from skeletal muscle.

The presence of calcium stimulated adenosine triphosphatase (Ca2+,Mg(2+)-ATPase) activity in isolated transverse tubule (t-tubule) membranes is distinguished from magnesium adenosine triphosphatase (Mg(2+)-ATPase) activity on the basis of differing thermal stabilities. The Mg(2+)-ATPase is the major protein component of the t-tubule membrane, and it can be difficult to discriminate between the low levels of Ca2+ stimulated ATPase activity found in isolates of t-tubules compared to the much higher Mg(2+)-ATPase activity. Thermal analysis reveals different inactivation temperatures (Ti) for the proteins responsible for ATP dependent calcium transport (Ti = 49 degrees C) and Mg(2+)-ATPase activity (Ti = 57 degrees C) in isolated t-tubule membranes. The differential scanning calorimetry profile of t-tubule membranes consists of three major components with transition temperatures (Tm) of 51 degrees C, 57 degrees C and 63 degrees C. Denaturation of the component with Tm = 57 degrees C correlates with inactivation of Mg(2+)-ATPase activity, and denaturation of the Tm = 51 degrees C component correlates with the inactivation of Ca2+,Mg(2+)-ATPase activity and calcium transport. The functions of the t-tubule membrane component or components that denature with Tm = 63 degrees C have yet to be identified. The lack of stimulation of calcium transport in isolated t-tubules by oxalate, the impermeability of isolated t-tubules to oxalate, and experiments performed on t-tubules with defined amounts of sarcoplasmic reticulum (SR) added suggest that contamination of the isolated t-tubules by SR is unlikely to account for the level of Ca2+,Mg(2+)-ATPase activity detected. The presence of a Ca2+,Mg(2+)-ATPase in the t-tubule membrane would provide a mechanism that may be involved in the partial removal of calcium that is accumulated in the junctional space during muscle relaxation or calcium that is released from the terminal cisternae of sarcoplasmic reticulum during excitation-contraction coupling.

Animals↗
PubMed2004

Thermal analysis of laser interstitial thermotherapy in ex vivo fibro-fatty tissue using exponential functions.

A therapeutic procedure to treat small, surface breast tumours up to 10 mm in radius plus a 5 mm margin of healthy, surrounding tissue using laser interstitial thermotherapy (LITT) is currently being investigated. The purpose of this study is to analyse and model the thermal and coagulative response of ex vivo fibro-fatty tissue, a model for breast tissue, during experimental laser interstitial thermotherapy at 980 nm. Laser radiation at 980 nm was delivered interstitially through a diffusing tip optical fibre inserted into a fibro-fatty tissue model to produce controlled heating at powers ranging from 3.2 to 8.0 W. Tissue temperature was measured with thermocouples placed at 15 positions around the fibre. The induced coagulation zone was measured on gross anatomical sections. Thermal analysis indicates that a finite sum of exponential functions is an approximate solution to the heat conduction equation that more accurately predicts the time-temperature dependence in tissue prior to carbonization (T < 100 degrees C) during LITT than the traditional model using a single exponential function. Analysis of the ellipsoid coagulation volume induced in tissue indicates that the 980 nm wavelength does not penetrate deep enough in fibro-fatty tissue to produce a desired 30 mm diameter (14.1 x 10(3) mm3) coagulation volume without unwanted tissue liquefaction and carbonization.

Adipose Tissue↗