Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Cheese”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 73 records · Page 4Linked to original sources

Improving the yield of Mozzarella cheese by phospholipase treatment of milk.

Part-skim Mozzarella cheese was manufactured from milk hydrolyzed with fungal phospholipase A1 prior to renneting. The phospholipase treatment reduced fat losses in whey and cooking water and increased cheese yield as a result of improved fat and moisture retention in the cheese curd. The amount of phospholipids in the whey was reduced because of improved retention of lysophospholipids in the cheese curd. Water binding in the fresh curds and young cheeses up to 3 wk of storage was investigated by a 1H nuclear magnetic resonance spin-spin relaxation technique. In the fresh curds, 2 dominant water fractions were present, characterized by average spin-spin relaxation times (T2) of 14 and 86 to 89 ms, respectively. These 2 fractions of low- and high-molecular-mobility water were similar in all cheeses and presumed to represent water associated with the casein matrix and water present in the pores. A few hours after manufacture, cheeses made with phospholipase showed decreased T2 of the high-mobility fraction, indicating improved water-holding capacity. It is suggested that lysophospholipids released from the fat globule membranes act as surface-active agents in the cheese curd, helping emulsification of water and fat during processing and reducing syneresis. During 3 wk of storage after manufacture, the mobility of both water fractions increased in all cheeses, but was highest in the cheeses made with phospholipase. The increase in mobility during the first weeks of storage has earlier been ascribed to structural changes in the protein matrix, which in principle could be accelerated because of the higher moisture content. However, the microstructure of phospholipase-treated cheese was investigated by confocal laser scanning microscopy and found to be very similar to the control cheese during processing and up to 28 d of storage. In addition, flowability, stretchability, and browning were acceptable and similar in all the manufactured cheeses. Thus, phospholipase hydrolysis of cheese milk improved the cheese yield without changing the cheese microstructure, and resulted in cheese with functional properties that were identical to traditional Mozzarella cheese.

Animals↗

Influence of calcium and phosphorus, lactose, and salt-to-moisture ratio on cheddar cheese quality: pH changes during ripening.

The pH of cheese is an important attribute that influences its quality. Substantial changes in cheese pH are often observed during ripening. A combined effect of calcium, phosphorus, residual lactose, and salt-to-moisture ratio (S/M) of the cheese on the changes in cheese pH during ripening was investigated. Eight cheeses with 2 levels of Ca and P (0.67 and 0.47% vs. 0.53 and 0.39%, respectively), lactose at pressing (2.4 vs. 0.78%), and S/M (6.4 vs. 4.8%) were manufactured. All the cheeses were salted at a pH of 5.4, pressed for 5 h, and then ripened at 6 to 8 degrees C. The pH of the salted curds before pressing and the cheeses during 48 wk of ripening was measured. Also, cheeses were analyzed for water-soluble Ca and P, organic P, and bound inorganic P during ripening. Changes in organic acids' concentration and shifts in the distribution of Ca and P between different forms were studied in relation to changes in pH. Cheeses with low S/M exhibited a larger increase in acid production during ripening compared with high S/M cheeses. Cheeses with the highest concentration of bound inorganic P exhibited the highest pH, whereas cheeses with the lowest concentration of bound inorganic P exhibited the lowest pH among the 8 treatments. Although conversion of lactose to short-chain, water-soluble organic acids decreased cheese pH, bound inorganic phosphate buffered the changes in cheese pH. Production of acid in excess of the buffering capacity (which was the case in low Ca and P and low S/M treatments) led to a low pH, whereas solubilization of bound inorganic P in excess to acid production (which was the case in high Ca and P and high S/M treatments) led to an increase in pH. However, for cheeses with high Ca and P and low S/M, changes in cheese pH were influenced by the level of residual lactose. Hence, pH changes in Cheddar cheese can be modulated by a concomitant control on the amount and state of Ca and P, level of residual lactose, and S/M of the cheese.

Acids↗

Chemical, physical, and sensory characteristics of mozzarella cheese fortified using protein-chelated iron or ferric chloride.

Mozzarella cheese containing 25 and 50 mg of iron/kg of cheese was manufactured from milk that had been fortified with casein-chelated iron, whey protein-chelated iron, or FeCl3. Chemical, physical, and sensory characteristics were compared with those of a control cheese. Physical properties were assessed by testing melting, apparent viscosity, and browning of heated cheese. Cheeses were evaluated by trained panelists for the presence of metallic flavors, oxidized flavors, and other undesirable flavors. Addition of 25 mg iron/kg of cheese had no effects on the physical properties of Mozzarella cheese. Apparent viscosity of cheese fortified with 50 mg of iron/kg of cheese tended to be slightly higher than the control cheese, although this difference was not statistically significant at all storage times. Cook color was not affected by iron fortification. No increase in chemical oxidation (measured using thiobarbituric acid assay) was observed between the control and iron-fortified cheeses. Slight but statistically significant increases in metallic flavors, oxidized flavors, and off-flavors in the iron-fortified cheese were observed by the trained sensory panel, but the flavor defects were of very low intensity. For metallic flavors, oxidized flavors, and off-flavors, the control cheese scored 1.5, 1.5, and 1.3, respectively; the iron-fortified cheese scored 2.1, 2.0, and 1.6 based on a nine-point scale (where 1 = not perceptible to 3 = slightly perceptible). Sensory scores for iron-fortified cheese made using casein-chelated iron or whey protein-chelated iron was not significantly different from those of cheese made using ferric chloride. When used on pizza, consumer panels rated the iron-fortified cheeses as comparable with the control cheese.

Caseins↗

Influence of traditional brine washing of smear Taleggio cheese on the surface spreading of Listeria innocua.

The influence of a traditional procedure of washing of smear Taleggio cheese on surface spreading of Listeria innocua was studied. This practice is carried out during ripening to remove molds, to select the surface microflora, and to control the ripening process. One cheese, both of 2 (i) and 4 (ii) weeks of ripening, was surface-inoculated with approximately 3 log CFU of L. innocua per entire cheese surface. The inoculated cheeses and others of the same age were weekly washed with brine solution. Listeria was spread both on the surface of the inoculated cheese and on the other cheeses, and it was also found in the brines and on the wooden boxes where the cheeses were ripened. The time of ripening when contamination occurs influenced the behavior of Listeria. At the moment of contamination, the smear surface microflora of (i) cheese was approximately 2 log CFU/g higher than of (ii) cheese. Listeria inoculated on 2-week-ripened cheese was able to colonize the entire surface of the cheese and to cross-contaminate the other cheeses. On the contrary, Listeria inoculated on a 4-week-ripened cheese was partially spread on the surface of the originally inoculated cheese, and the transfer of contamination by the washing procedure was restrained. Because a random distribution of Listeria on cheese surface was observed, the importance of the mode of sampling was discussed. Because of the lack of critical control points during ripening of Taleggio cheese, the Listeria hazard needs to be controlled by taking appropriate control measures to break off the contamination cycle (cheese --> brine --> wooden boxes --> cheese).

Cheese↗

Influence of milk-clotting enzyme concentration on the alphas1-casein hydrolysis during soft cheeses ripening.

We studied the influence of the dose of milk-clotting enzyme on alphas1-CN degradation, soluble nitrogen production, and sensory profile for an Argentinean soft cheese: Cremoso Argentino. Five different types of cheeses were produced: 1) control cheeses with normal technology, 2) cheeses with inactivated milk-clotting enzyme, 3) cheeses with inactivated milk-clotting enzyme, without starter (acidified with glucono delta lactone), 4) cheeses with a half dose of milk-clotting enzyme, and 5) cheeses with a double dose of milk-clotting enzyme. Proteolysis was assessed by isoelectric focusing electrophoresis of the insoluble fraction at pH 4.6, followed by densitometric quantification. Soluble nitrogen at pH 4.6, expressed as a percentage of total nitrogen and defined as ripening index was also performed. A sensorial panel evaluated the cheeses at the end of ripening. The hydrolysis level of alphas1-CN depended on the milk-clotting enzyme dose used in cheese making. Cheeses without active coagulant did not show degradation at the end of ripening, while cheeses with half and whole doses showed proportional degradations to coagulant dose. Cheese with a double dose of coagulant did not show higher alphas1-CN hydrolysis than normal cheese. No difference was found between cheeses with and without microbiological starter, indicating that the selected culture, composed of thermophilic strains, was unable to attack the whole casein. A high linear correlation was found between ripening index and the relation Sensorial characteristics of cheeses agree with objective analysis. Cheeses without active coagulant were hard and crumbly, while cheeses with normal dose were soft and creamy.

Animals↗

Influence of adjunct cultures on ripening of reduced fat Edam cheeses.

The influence of four adjunct cultures [Brevibacterium linens (BL2), Lactococcus lactis ssp. diacetylactis, Lactobacillus helveticus (LH212), and Lactobacillus reuteri (ATCC 23272)] on chemical and sensory characteristics of reduced fat Edam cheese was studied. The aminopeptidase activity of Lactococcus lactis ssp. diacetylactis was higher than that of Lactobacillus helveticus, Lactobacillus reuteri, and Brevibacterium linens, respectively. Mean percent fat and moisture contents of reduced fat cheese were 20.85 +/- 0.69 and 42.95 +/- 0.43, respectively. Percentage of fat and moisture of full fat control cheese were 30.06 +/- 0.78 and 39.11 +/- 0.60. Titratable acidity increased in all cheese with aging while pH initially decreased but increased in cheese after 6 mo aging at 7 degrees C. Lactic acid bacteria counts were on average one log higher for reduced fat cheeses than for full fat control cheese and counts decreasing with aging. Free amino acids (FAA) in cheeses increased with aging, and were higher in reduced fat cheeses than in the full fat control cheese. Reduced fat cheeses containing L. helveticus exhibited the highest FAA content. Descriptive sensory panelists (n = 9) did not detect differences among cheeses after 3 and 6 mo ripening, but aged/developed flavors (fruity, nutty, brothy, sulfur, free fatty acid) and sweetness increased between 3 and 6 mo. Expert panelists (n = 6) detected differences in texture quality among the cheeses. Reduced fat control cheeses and reduced fat cheeses with L. helveticus and L. reuteri received the highest texture quality scores. Addition of L. helveticus and Lc. lactis ssp. diacetylactis, as adjunct cultures to reduced fat Edam cheeses increased proteolysis, while the addition of L. helveticus and L. reuteri increased texture quality of cheeses.

Amino Acids↗

Effect of salt on structure-function relationships of cheese.

Our objective was to determine the effect of salt on structural and functional properties of cheese. Unsalted Muenster cheese was obtained on 1 d, vacuum packaged, and stored for 10 d at 4 degrees C. The cheese was then cut into blocks that were vacuum packaged. After 4 d of storage at 4 degrees C, cheese blocks were high-pressure injected one, three, or five times, with a 20% (wt/wt) sodium chloride solution. Successive injections were performed 24 h apart. After 40 d of storage at 4 degrees C, cheese blocks were analyzed for chemical, structural, and functional attributes. Injecting sodium chloride increased the salt content of cheese, from 0.1% in the control, uninjected cheese to 2.7% after five injections. At the highest levels, salt injection promoted syneresis, and, after five injections, the moisture content of cheese decreased from 41 to 38%. However, the increased salt content caused a net weight gain. Cheese pH, soluble nitrogen, and total and soluble calcium content were unaffected. Cheese injected five times had a 4% increased area of cheese occupied by protein matrix compared with uninjected cheese. Hardness, adhesiveness, and initial rate of cheese flow increased, and cohesiveness decreased upon salt injection. However, the final extent of cheese flow, or melting was unaffected. We concluded that adding salt to cheese alters protein interactions, such that the protein matrix becomes more hydrated and expands. However, increasing the salt content of cheese did not cause an exchange of calcium with sodium. Therefore, calcium-mediated protein interactions remain a major factor controlling cheese functionality.

Calcium↗

Effect of sodium citrate on structure-function relationships of Cheddar cheese.

The objective of this study was to determine the effect of sodium citrate on the structure and functionality of Cheddar cheese. The hypothesis was that citrate (sodium citrate) injection would affect cheese properties mainly through its effect on bound calcium (calculated as the difference between total calcium and the water-soluble calcium content of a cheese extract). A 9-kg block of Cheddar cheese was made, vacuum-packaged, and then stored for 2 wk at 4 degrees C. After storage, the cheese was cut into 0.5- to 0.6-kg blocks that were vacuum-packaged and stored for 1 wk at 4 degrees C prior to injection. Cheese blocks were then high-pressure injected with a buffer solution (pH 5.27) containing 40% (wt/ wt) citric acid trisodium dihydrate and 6.25% (wt/wt) anhydrous citric acid, from zero (control) to five times (successive injections performed 24 h apart). Increased citric acid content of cheese from 0.22 (uninjected) to 1.39% (after five injections) caused phosphate solubilization. Thus, the calculated bound phosphate content of cheese decreased from 0.54 to 0.45 mmol/g of protein. However, unexpectedly, the soluble calcium content decreased from 0.34 (control) to 0.28 mmol/g of protein (after five injections), whereas the bound calcium content remained unchanged (0.42 mmol/g of protein). The decrease in soluble calcium probably resulted from the formation and concentration of crystals in the cheese surface, which was not included in samples for analysis, and from the expulsion of serum from within the cheese. Higher concentration of solutes in the water phase of cheese would increase the volume of serum, but the cheese had limited holding capacity and serum was expelled. Citrate injection increased the sodium content of cheese from 0.63 to 0.93%, but it had no effect on cheese pH (5.2). After five injections, the protein matrix expanded, occupying an increased area of cheese matrix (83 vs. 78%). Even though citrate injection had no effect on bound calcium, and thus the rate and extent of cheese flow were unaffected, increased phosphate solubilization, and possibly decreased ionic calcium content, resulted in expansion of the protein matrix and increased cheese hardness.

Calcium↗

A new probiotic cheese with antioxidative and antimicrobial activity.

The aim of our study was to develop an original probiotic cheese based on the Estonian open-texture, smear-ripened, semisoft cheese "Pikantne." Cheese was produced by two methods using cheese starter cultures (Probat 505) in combination with 0.04% of probiotic Lactobacillus fermentum strain ME-3 (10(9) cfu/mL) with high antimicrobial activity and antioxidative properties. The probiotic Lactobacillus was added into milk simultaneously with starter cultures (cheese A) and into drained curd (cheese B). After addition of probiotic L. fermentum ME-3, the cheese composition, flavor, and aroma were comparable to the control cheese (score values = 4.5, 4.2, and 3.7 for control cheese, cheese A, and cheese B, respectively). Cheese A, which had good sensory properties, was chosen for further testing of viability and probiotic properties. The probiotic strain was found to withstand the technological processing of cheese, surviving and sustaining moderate antimicrobial and high antioxidative activity throughout ripening and storage (the ripened cheese contained approximately 5 x 10(7) cfu/g viable ME-3 cells), although the viability of the ME-3 strain incorporated into the cheese showed a slight decrease between d 24 and 54 after cheese preparation. Semisoft cheese "Pikantne" serves as a suitable carrier of antimicrobial and antioxidative L. fermentum ME-3.

Anti-Infective Agents↗

Application of exopolysaccharide-producing cultures in reduced-fat Cheddar cheese: texture and melting properties.

Textural, melting, and sensory characteristics of reduced-fat Cheddar cheeses made with exopolysaccharide (EPS)-producing and nonproducing cultures were monitored during ripening. Hardness, gumminess, springiness, and chewiness significantly increased in the cheeses as fat content decreased. Cheese made with EPS-producing cultures was the least affected by fat reduction. No differences in hardness, springiness, and chewiness were found between young reduced fat cheese made with a ropy Lactococcus lactis ssp. cremoris [JFR1; the culture that produced reduced-fat cheese with moisture in the nonfat substance (MNFS) similar to that in its full-fat counterpart] and its full-fat counterpart. Whereas hardness of full-fat cheese and reduced-fat cheese made with JFR1 increased during ripening, a significant decrease in its value was observed in all other cheeses. After 6 mo of ripening, reduced fat cheeses made with all EPS-producing cultures maintained lower values of all texture profile analysis parameters than did those made with no EPS. Fat reduction decreased cheese meltability. However, no differences in meltability were found between the young full-fat cheese and the reduced-fat cheese made with the ropy culture JFR1. Both the aged full- and reduced-fat cheeses made with JFR1 had similar melting patterns. When heated, they both became soft and creamy without losing shape, whereas reduced-fat cheese made with no EPS ran and separated into greasy solids and liquid. No differences were detected by panelists between the textures of the full-fat cheese and reduced-fat cheese made with JFR1, both of which were less rubbery or firm, curdy, and crumbly than all other reduced-fat cheeses.

Cheese↗

Utilization of cheddar cheese containing nisin as an antimicrobial agent in other foods.

Cheddar cheese made with nisin-producing lactococci contained between 400 and 1200 IU of nisin per gram of cheese. Cultures used were Lactococcus lactis ssp. cremoris JS102, a nisin-producing transconjugant developed in the laboratories of Dr. L.L. McKay and Lactococcus lactis ssp. lactis NCDO 1404 obtained from the National Collection of Food Bacteria, Reading, England. Pasteurized process cheese spreads with 53% and 60% moisture and 0, 301 and 387 IU nisin/g were manufactured and inoculated with 2000 spores of Clostridium sporogenes PA 3679 during manufacture. The heat process did not reduce nisin activity in the cheese spreads. The spreads were incubated at 22 degrees and 37 degrees C for 90 days. Spoilage was detected by the presence of gas and/or odor in the packages. The shelf-life of the nisin-containing cheese spreads was significantly greater than that of the control cheese spreads at the lower temperature at both moisture levels, whereas the keeping quality of the higher moisture cheeses at the higher temperature was not significantly different. Club cheese or cold pack cheese spreads with moisture levels of 44% and 60% and 0, 100 and 300 IU nisin/g were made. These cold processed cheese spreads were inoculated with 1000 cfu per g of Listeria monocytogenes V7, Staphylococcus aureus 196E and spores of C. sporogenes PA 3679. Heat shocked spores of PA 3769 at the same number were added to separate lots of the cheese spread. The cold pack cheese spreads were incubated at 23 degrees and 37 degrees C for up to 8 weeks. Samples were taken weekly and analyzed for surviving organisms. Significant reductions in numbers of the non-sporeforming test microbes were noted at both temperatures, at both moisture levels and both levels of nisin. Heat shocking the spores was needed to show reduction in numbers during the storage of the cold pack cheese spreads. The data obtained in this study suggest that the use of nisin-containing cheese as an ingredient in pasteurized process cheese or cold pack cheese spreads could be an effective method of controlling the growth of undesirable microorganisms in these processed foods.

Cheese↗

Impact of low concentration factor microfiltration on milk component recovery and Cheddar cheese yield.

The effect of microfiltration (MF) on the composition of Cheddar cheese, fat, crude protein (CP), calcium, total solids recovery, and Cheddar cheese yield efficiency (i.e., composition adjusted yield divided by theoretical yield) was determined. Raw skim milk was microfiltered twofold using a 0.1-microm ceramic membrane at 50 degrees C. Four vats of cheese were made in one day using milk at lx, 1.26x, 1.51x, and 1.82x concentration factor (CF). An appropriate amount of cream was added to achieve a constant casein (CN)-to-fat ratio across treatments. Cheese manufacture was repeated on four different days using a randomized complete block design. The composition of the cheese was affected by MF. Moisture content of the cheese decreased with increasing MF CF. Standardization of milk to a constant CN-to-fat ratio did not eliminate the effect of MF on cheese moisture content. Fat recovery in cheese was not changed by MF. Separation of cream prior to MF, followed by the recombination of skim or MF retentate with cream resulted in lower fat recovery in cheese for control and all treatments and higher fat loss in whey when compared to previous yield experiments, when control Cheddar cheese was made from unseparated milk. Crude protein, calcium, and total solids recovery in cheese increased with increasing MF CF, due to partial removal of these components prior to cheese making. Calcium and calcium as a percentage of protein increased in the cheese, suggesting an increase in calcium retention in the cheese with increasing CF. While the actual and composition adjusted cheese yields increased with increasing MF CF, as expected, there was no effect of MF CF on cheese yield efficiency.

Animals↗

Probiotic cheese production using Lactobacillus casei cells immobilized on fruit pieces.

Lactobacillus casei cells were immobilized on fruit (apple and pear) pieces and the immobilized biocatalysts were used separately as adjuncts in probiotic cheese making. In parallel, cheese with free L. casei cells and cheese only from renneted milk were prepared. The produced cheeses were ripened at 4 to 6 degrees C and the effect of salting and ripening time on lactose, lactic acid, ethanol concentration, pH, and lactic acid bacteria viable counts were investigated. Fat, protein, and moisture contents were in the range of usual levels of commercial cheeses. Reactivation in whey of L. casei cells immobilized on fruit pieces after 7 mo of ripening showed a higher rate of pH decrease and lower final pH value compared with reactivation of samples withdrawn from the remaining mass of the cheese without fruit pieces, from cheese with free L. casei, and rennet cheese. Preliminary sensory evaluation revealed the fruity taste of the cheeses containing immobilized L. casei cells on fruit pieces. Commercial Feta cheese was characterized by a more sour taste, whereas no significant differences concerning cheese flavor were reported by the panel between cheese containing free L. casei and rennet cheese. Salted cheeses scored similar values to commercial Feta cheese, whereas unsalted cheese scores were significantly lower, but still acceptable to the sensory panelists.

Animals↗

Behaviour of Listeria monocytogenes during the manufacture and ripening of Manchego and Chihuahua Mexican cheeses.

The ability of Listeria monocytogenes to survive the Mexican Manchego and Chihuahua cheese-making processes and its persistence during the ripening stages of both cheeses was examined. Commercial pasteurized and homogenized whole milk was inoculated with Listeria monocytogenes (strain ATCC 19114) to a level between 2 x 10(6) and 9 x 10(6) CFU/ml. The milk was used to make Mexican Manchego and Chihuahua cheeses in a 25-l vat. Mexican Manchego cheese was ripened for 5 days and Chihuahua cheese for 6 weeks at 12 degrees C and 85% RH. Listeria present in the cheese was enumerated by diluting samples in sterile 0.1% peptone water and plating on Oxford agar. Duplicate samples were taken at each step of the manufacturing process. During the first week of ripening samples were taken daily from both cheeses. For Chihuahua cheese, samples were taken weekly after the first week of the ripening stage. During the manufacture of Mexican Manchego cheese, Listeria counts remained relatively constant at 10(6) CFU/ml, while with Chihuahua cheese there was a one log decrease in numbers (10(6) to 10(5) CFU/ml). After pressing both curds overnight, numbers of bacteria decreased in Mexican Manchego cheese to 8.2 x 10(5) but increased in Chihuahua cheese from 1.7 x 10(5) to 1.2 x 10(6) CFU/ml. During the ripening stage, counts of Listeria remained constant in both cheeses. However, since the Chihuahua cheese ripening stage is about 6 weeks, the number of bacteria decreased from 2 x 10(6) to 4 x 10(4) CFU/g. The results show that Listeria monocytogenes is able to survive the manufacture and ripening processes of both Mexican cheeses.

Animals↗

Proteolysis during ripening of Manchego cheese made from raw or pasteurized ewes' milk. Seasonal variation.

Changes in nitrogen compounds during ripening of 40 batches of Manchego cheese made from raw milk (24 batches) or pasteurized milk (16 batches) at five different dairies throughout the year were investigated. After ripening for six months, degradation of p-kappa- and beta-caseins was more intense in raw milk cheese and degradation of alpha(s2)-casein in pasteurized milk cheese. Milk pasteurization had no significant effect on breakdown of alpha(s1)-casein. Hydrophobic peptide content did not differ between raw and pasteurized milk cheese, whereas hydrophilic peptide content was higher in raw milk cheese. There were no significant differences between seasons for residual caseins, but hydrophobic peptides were at a higher level in cheese made in autumn and winter and hydrophilic peptides in cheese made in winter and spring. Raw milk cheese had a higher content of total free amino acids and of most individual free amino acids than pasteurized milk cheese. The relative percentages of the individual free amino acids were significantly different for raw milk and pasteurized milk cheeses. The relative percentages of Lys and lie increased, while those of Val, Leu and Phe decreased during ripening. There were also seasonal variations within the relative percentages of free amino acids. In raw milk cheeses, Asp and Cys were relatively more abundant in those made in autumn, Glu and Arg in cheeses made in winter, and Lys and Ile in cheeses made in spring and summer. Biogenic amines were detected only in raw milk cheese, with the highest levels of histamine, tryptamine and tyramine in cheeses made in spring, winter and spring, respectively.

Amino Acids↗

Inhibition of Listeria innocua in cheddar cheese by addition of nisin Z in liposomes or by in situ production in mixed culture.

The effect of addition of purified nisin Z in liposomes to cheese milk and of in situ production of nisin Z by Lactococcus lactis subsp. lactis biovar diacetylactis UL719 in the mixed starter on the inhibition of Listeria innocua in cheddar cheese was evaluated during 6 months of ripening. A cheese mixed starter culture containing Lactococcus lactis subsp. lactis biovar diacetylactis UL719 was selected for high-level nisin Z and acid production. Experimental cheddar cheeses were produced on a pilot scale, using the selected starter culture, from milk with added L. innocua (10(5) to 10(6) CFU/ml). Liposomes with purified nisin Z were prepared from proliposome H and added to cheese milk prior to renneting to give a final concentration of 300 IU/g of cheese. The nisin Z-producing strain and nisin Z-containing liposomes did not significantly affect cheese production and gross chemical composition of the cheeses. Immediately after cheese production, 3- and 1.5-log-unit reductions in viable counts of L. innocua were obtained in cheeses with encapsulated nisin and the nisinogenic starter, respectively. After 6 months, cheeses made with encapsulated nisin contained less than 10 CFU of L. innocua per g and 90% of the initial nisin activity, compared with 10(4) CFU/g and only 12% of initial activity in cheeses made with the nisinogenic starter. This study showed that encapsulation of nisin Z in liposomes can provide a powerful tool to improve nisin stability and inhibitory action in the cheese matrix while protecting the cheese starter from the detrimental action of nisin during cheese production.

Cheese↗

High omega-3 fatty acid content in alpine cheese: the basis for an alpine paradox.

BACKGROUND: Alpha-linolenic acid (ALA) may protect from cardiovascular disease. Because fresh alpine grass contains high amounts of ALA, we hypothesized that the levels of omega-3 fatty acids would concentrate to nutritional relevance in the cheese of milk from cows with alpine grass feeding compared with cheese from silage and concentrate feeding; the newly available cheese produced from cows fed with linseed supplementation should contain even higher ALA concentrations. METHODS AND RESULTS: Forty different cheeses were analyzed by gas chromatography for their fatty acid profile: (1) 12 from well-defined alpine regions around Gstaad, Switzerland; (2) 7 commercially available English cheddar cheeses; (3) 6 cheeses from cows fed with linseed supplementation; (4) 7 industrial-type Emmentals; and (5) 8 alpine cheeses with partial silage feeding. The alpine cheese contained 4 times more linolenic acid (C18:3omega-3) compared with cheddar, more total omega-3 fatty acids, and showed a significantly lower n-6:omega-3 ratio. Conjugated linoleic acid (C18:2 c9/t11) was 3-fold higher, whereas the amount of palmitic acid was 20% lower. The Emmental reached 40% of the ALA content compared with alpine cheese, and surprisingly, cheese from linseed-supplemented cows contained only 49% of that of the alpine cheese (P<0.001 for each trait in the 5 cheese groups). CONCLUSIONS: Cheese made of milk from cows grazed on alpine pastures had a more favorable fatty acid profile than all other cheese types. Alpine cheese may be a relevant source of ALA and other cardioprotective fatty acids.

Arachidonic Acid↗

Temperature effect on structure-opacity relationships of nonfat mozzarella cheese.

Our objective was to determine the effect of heating on the structure of nonfat Mozzarella cheese and then to relate changes in structure to changes in cheese opacity. Cheese was made according to a direct-acid, stirred-curd procedure. Cheese samples, at 4 degrees C, were taken on d 1 and placed into glass bottles, which were sealed and heated. Once the cheese reached 10 degrees C or 50 degrees C, the bottles were placed on a scanner and color values measured. Samples were also taken on d 1 for chemical, micro, and ultrastructural analyses. Applying heat increased cheese opacity. At 50 degrees C the cheese was more opaque than at 10 degrees C. The increase in temperature induced changes in cheese structure. Larger high-density protein aggregates and increased protein concentration in the protein matrix were observed in cheese at 50 degrees C. Applied heat would favor hydrophobic interactions, and possibly, re-association of beta-casein and calcium with the protein matrix, promoting protein-to-protein interactions. Thus, the protein matrix contracts, occupying less cheese matrix area, and microphase separation occurs, causing serum pockets to grow in size, and microstructural heterogeneity to increase. It is proposed that the increased size of aggregates and heterogeneity of the cheese at 50 degrees C promote light reflection, thus increasing cheese opacity. We concluded that applying heat alters protein interactions in the cheese matrix, manifested as changes in cheese structure. Such changes in structure help provide an understanding of changes in cheese opacity.

Cheese↗