[The effectiveness of water purification of oil products at water works].
Explore the source record for details and available documents.
SEARCH · Search PubMed
Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Explore the source record for details and available documents.
A brief primer on synthetic fuels is given. The paper includes brief descriptions of generic conversion technologies that can be used to convert various raw materials such as coal, oil shale, tar sands, peat and biomass into synthetic fuels similar in character to petroleum-derived fuels currently in commerce. Because the subject is vast and the space is limited, references for additional information on synthetic fuel processes and products are also given in the paper.
Improvement of the fermentation efficiency of poly-beta-hydroxybutyrate (PHB) may make it competitive with chemically synthesized petroleum-based polymers. One step toward this is optimization of fluid dispersion and the feed rates to a fed-batch bioreactor. In a recent study using a fermentation model, dispersion corresponding to a Peclet number of approximately 20 was shown to maximize the productivity of PHB. Here further improvement has been investigated using neural optimization. A comparison of seven neural topologies has shown that while feed-forward and radial basis neural networks are computationally efficient, recurrent networks generate higher concentrations of PHB. All networks enhanced the productivity by 16-93% over model-based optimization.
Silicon carbide is produced by heating a mixture of petroleum coke and silica sand to approximately 2000 degrees C in an electric furnace for 36 hours. During heating, large amounts of carbon monoxide are released, sulphur dioxide is produced from residual sulphur in the coke, and hydrocarbon fume is produced by pyrolysis of the coke. Loading and unloading furnaces causes exposures to respirable dust containing crystalline silica, silicon carbide, and hydrocarbons. In the autumn of 1980 extensive measurements were made of personal exposures to air contaminants. Eight hour time weighted exposures to sulphur dioxide ranged from less than 0.1 ppm to 1.5 ppm and respirable participate exposures ranged from 0.01 mg/m3 to 9.0 mg/m3. Geometric mean particulate exposures for jobs ranged from 0.1 mg/m3 to 1.46 mg/m3. The particulate contained varying amounts of alpha-quartz, ranging from less than 1% to 17%, and most quartz exposures were substantially below the threshold limit value of 100 micrograms/m3. Only traces of cristobalite (less than 1%) were found in the particulate. Median exposures to air contaminants in each job were estimated. Since the operations at the plant had been stable over the past 30 years, it was possible to estimate long term exposures of workers to sulphur dioxide, respirable particulate, quartz, total inorganic material, and extractable organic material. Cumulative exposure (average concentration times exposure duration) for each of the air contaminants was estimated for each worker using his job history. There was sufficient independent variability in the sulphur dioxide and respirable particulate cumulative exposures to make an assessment of their independent effects feasible. The theoretical basis for using the cumulative exposure index and its shortcomings for epidemiological applications were presented.
Polyhydroxyalkanoates (PHAs) are biodegradable bioplastics formed from renewable resources, like sugars, with similar characteristics of polypropylene. These bioplastics are industrially produced by pure cultures using expensive pure substrates. These factors lead to a much higher selling price of PHAs compared to petroleum-based plastics, like polypropylene. The use of mixed cultures and cheap substrates (waste materials) can reduce costs of PHA production by more than 50%. Storage of PHAs by mixed populations occurs under transient conditions mainly caused by discontinuous feeding and variation in the electron donor/acceptor presence. In the last years the mechanisms of storage, metabolism and kinetics of mixed cultures have been studied. The maximum capacity of PHA storage and production rate is dependent on the substrate and on the operating conditions used. In this paper an overview and discussion of various mechanisms and processes for PHA production by mixed cultures is presented.
To investigate occupational determinants of bladder cancer in the urban area of Shanghai, occupation and industry information for 1,219 incident bladder cancer cases diagnosed during the period 1980 to 1984 were compared with 1982 census data on employment. Standardized incidence ratios (SIR) for bladder cancer were estimated for occupation and industry classifications. Significant excess risks were observed for plastic products workers (male: SIR = 432; female: SIR = 368); textile bleachers, dyers, and finishers (male: SIR = 169); metal refining and processing workers (male: SIR = 139; female: SIR = 197); petroleum refining workers (male: SIR = 2152); railway engine drivers and firemen (male: SIR = 683); and workers employed in industries of apparel and other textile products manufacturing (female: SIR = 204); paper processing (male: SIR = 146; female: SIR = 226); organic chemical manufacturing (male: SIR = 186); plastic product manufacturing (male: SIR = 218; female: SIR = 272); and metallurgy (male: SIR = 107; female: SIR = 561). This study indicates that many of the industries and occupations that are responsible for increased risk throughout the world are also associated with occupational bladder cancer in Shanghai.
The capacity of polycyclic aromatic hydrocarbon (PAH)-utilizing bacteria to produce biosurfactants was investigated. Twenty-three bacteria isolated from a soil contaminated with petroleum wastes were able to form clearing zones on mineral salt agar plates sprayed with solutions of PAHs. Naphthalene and phenanthrene were utilized as sole substrates. Biosurfactant production was detected by surface tension lowering and emulsifying activities from 10 of these strains grown in an iron-limited salt medium supplemented with high concentrations of dextrose or mannitol, as well as with naphthalene or phenanthrene. Glycolipid determinations showed that in cultures of Pseudomonas aeruginosa 19SJ on naphthalene, the maximal productivity of biosurfactants was delayed compared with that in cultures grown on mannitol. However, when small amounts of biosurfactants and naphthalene degradation intermediates were present at the onset of the cultivation, the delay was markedly shortened. Production of biosurfactants was accompanied by an increase in the aqueous concentration of naphthalene, indicating that the microorganism was promoting the solubility of its substrate. Detectable amounts of glycolipids were also produced on phenanthrene. This is the first report of biosurfactant production resulting from PAH metabolism.
Most chemicals that produce skin cancer are genotoxic by in vitro and in vivo short-term assays and produce a high incidence of skin cancer within a year if optimal doses are applied. If in long-term skin painting studies one or two tumours in 50 mice are observed there is a general consensus that no carcinogenic activity can be claimed and it has been suggested that if up to 10% tumours are induced by irritant substances this could be due to an enhancement of spontaneous tumour incidence. Observations of skin tumour incidences higher than 10% with non-genotoxic substances, usually after a long latent period, is considered to represent evidence for a non-genotoxic mechanism. Examples of such substances include croton oil, 12-O-tetradecanoyl-phorbol-13-acetate (TPA), sodium hydroxide, potassium hydroxide, phenol, dodecylbenzene and petroleum-derived middle distillates. Two distinct mechanisms appear to be involved in the production of tumours by a non-genotoxic substance. The first of these is that seen with the strong promoting agents. These, by binding to and activating protein kinase C, appear to directly stimulate sustained epidermal hyperplasia without severe skin damage. The other appears to involve substances producing severe skin damage either by a direct caustic effect or by cumulative irritancy. These changes give rise to marked epidermal hyperplasia with repeated episodes of regeneration and damage. The tumour induction by both mechanisms probably results from oncogene activation and it is possible that oxidative enzymes from inflammatory cells may be involved in the activation process. Various reasons are given why non-genotoxic carcinogenesis in the skin is considered not to be relevant to man and ways of recognising and avoiding its occurrence in animals studies are recommended.
Biosurfactant production is a desirable property of hydrocarbon-degrading microorganisms (HDM). We characterized biosurfactant producing microbial populations from a Long Beach soil, California (USA) and a Hong Kong soil (China), contaminated with diesel oil. A total of 33 hydrocarbon-utilizing microorganisms were isolated from the soils. Twelve isolates and three defined consortia were tested for biosurfactant production and emulsification activity. The highest reduction of surface tension was achieved with a consortium of L1, L2 and L3 isolates from a Long Beach soil (41.4mN m(-1)). Isolate L1 (Acinetobacter junii) displayed the highest reduction of surface tension (46.5 mN m(-1)). The emulsifying capacity evaluated by the E24 emulsification index was highest in the culture of isolate L5 (74%). No substantial emulsification was achieved with the cell-free extracts, indicating that the emulsifying activity was not extracellular. Based on surface tension and the E24 index results, isolates F1, F2, F3, F4, L1, L2, L3 and L4 were identified by 16S rRNA gene sequencing as Bacillus cereus, Bacillus sphaericus, B. fusiformis, Acinetobacter junii, a non-cultured bacterium, Pseudomonas sp. and B. pumilus, respectively. Cluster analyses of 16S rRNA gene sequences of the bacterial isolates revealed 70% similarity amongst hydrocarbon-degrading bacterial community present in both soils. Five isolates (isolates F1, F2, F3, F4 and L4) belong to the Firmicutes order, two isolates (L1 and L3) belong to the Proteobacteria order and one isolate (L2) is an Actinomyces sp. Simpson's index (1 - D) and the Shannon-Weaver index (H) revealed more diversity of HDM in the Hong Kong soil, while evenness (E) and the equitability (J) data indicated that there was not a dominant population. Bacterial isolates displaying substantial potential for production of biosurfactants can be applied in the bioremediation of soils contaminated with petroleum hydrocarbons.
The enzyme 2'-aminobiphenyl-2,3-diol-1,2-dioxygenase (CarB), encoded by two genes (carBa and carBb), is an alpha(2)beta(2) heterotetramer that presents meta-cleavage activity toward the hydroxylated aromatic ring in the carbazole degradation pathway from petroleum-degrader bacteria Pseudomonas spp. The 1,082-base pair polymerase chain reaction product corresponding to carBaBb genes from Pseudomonas stutzeri ATCC 31258 was cloned by site-specific recombination and expressed in high levels in Escherichia coli BL21-SI with a histidine-tag and in native form. The CarB activity toward 2,3-dihydroxybiphenyl was similar for these two constructions. The alpha(2)beta(2)-heterotetrameric 3D model of CarB dioxygenase was proposed by homology modeling using the protocatechuate 4,5-dioxygenase (LigAB) structure as template. Accordingly, His12, His53, and Glu230 coordinate the Fe(II) in the catalytic site at the subunit CarBb. The model also indicates that His182 is the catalytic base responsible for deprotonating one of the hydroxyl group of the substrate by a hydrogen bond. The hydrophobic residues Trp257 and Phe258 in the CarB structure substituted the LigAB amino acid residues Ser269 and Asn270. These data could explain why the CarB was active for 2,3-dihydroxybiphenyl and not for protocatechuate.
The Gulf Coast region of the United States abuts five states, including Alabama, Florida, Louisiana, Mississippi, and Texas. In general, the Gulf of Mexico has a surface area of 1.63 million square kilometers (630,000 square miles) and a watershed area of 4.69 million square kilometers (1.81 million square miles) in the United States. This region is one of the nation's largest ecological systems and is closely linked to a significant portion of the nation's economy. In the Gulf Coast region, energy, fisheries, agriculture, and tourism rank among the most significant sectors of the economy. The Gulf has five of the top ten fishing ports in the United States, and commercial fisheries in the Gulf annually produce nearly 2 billion tons of fish, oysters, shrimps, and crabs. Gulf ports handle one-half of the nation's import-export tonnage. Petroleum produced in the Gulf represents about 80% of the nation's offshore production. The Gulf Coast region largely relies on many natural resources to fuel many important sectors of its economy. But nevertheless, the health and vitality of the Gulf have declined in recent years, caused in part by increasing populations along its coast and the growing demand upon its resources and in part by the accumulation of years of careless depletion, abuse, and neglect of the environment. Equally important are the impacts of natural and human-induced climate change on the economy and on the quality of life for millions of people living in the Gulf Coast region. The results have generated alarming increases in damage to and destruction of the ecosystems and habitats of the Gulf. This paper reviews the nature of global environmental change and addresses the potential health and environmental impacts that may occur in the Gulf Coast region of the United States as a consequence of various environmental alterations resulting from global change.
OBJECTIVE: Investigate the environmental conditions in and the state of health of women who live in rural communities surrounded by oil wells and oil production stations in the Amazon region of Ecuador. METHOD: We used a comparative cross-sectional design, classifying exposure according to the location of the communities with respect to the oil wells and production stations. Water samples from the local rivers were analyzed to determine total petroleum hydrocarbons, and a structured questionnaire was used with the head of each family in the study. The study was performed in rural communities in northeastern Ecuador from November 1998 through April 1999. The study included 9 communities in the exposed area (368 participants) and 14 communities in the unexposed area (291 participants). RESULTS: The rivers of the exposed communities showed contamination levels much above the limits acceptable for human use. Statistically significant differences between the exposed communities and the unexposed communities were found for the prevalence of skin fungi for the two weeks prior to the study (odds ratio (OR) = 1.37; 95% confidence interval (CI) = 1.01-1.86) as well as for nasal irritation (OR = 2.18, 95% CI = 1.64-2.91) and for throat irritation (OR = 1.68, 95% CI = 1.02-2.75) in the preceding 12 months. Also associated with exposure in the two preceding weeks were fatigue and the category of "other symptoms"; similarly associated with exposure in the preceding 12 months were headaches, eye irritation, earaches, diarrhea, and gastritis. CONCLUSIONS: The symptoms found among the participants in the exposed communities match the toxicity symptoms caused by oil. There is an urgent need to establish an adequate environmental control and remediation program in order to prevent unnecessary and unacceptable health hazards for these populations.
Twelve powdered and 13 liquid infant formulas were analyzed by using an extension of AOAC Official Method 996.01 for fat analysis in cereal products. Samples were hydrolyzed with 8 N HCl and extracted with ethyl and petroleum ethers. Fatty acid methyl esters were prepared by refluxing the mixed ether extracts with methanolic sodium hydroxide in the presence of 14% boron trifluoride in methanol. The extracts were analyzed by gas chromatography. In powdered formulas, saturated fatty acid (SFA) content (mean +/- SD; n = 12) was 41.05 +/- 3.94%, monounsaturated fatty acid (MUFA) content was 36.97 +/- 3.38%, polyunsaturated fatty acid (PUFA) content was 20.07 +/- 3.08%, and total trans fatty acid content was 1.30 +/- 1.27%. In liquid formulas, SFA content (mean +/- SD; n = 13) was 42.29 +/- 2.98%, MUFA content was 36.05 +/- 2.47%, PUFA content was 20.65 +/- 2.40%, and total trans fatty acid content was 0.88 +/- 0.54%. Total fat content in powdered formulas ranged from 4.4 to 5.5 g/100 kcal and linoleic acid content ranged from 868 to 1166 mg/100 kcal. In liquid formulas, total fat content ranged from 4.1 to 5.1 g/100 kcal and linoleic acid content ranged from 820 to 1100 mg/100 kcal. There were no significant differences between powdered and liquid infant formulas in concentrations of total fat, SFA, MUFA, PUFA, or trans fatty acids.
Vaseline and paraffin have been injected into various parts of the body. Vaselinoma and paraffinoma are well-described complications, despite which nasal packing with Vaseline gauze is still common in the management of epistaxis, after rhinoplasty, endonasal surgery, to control bleeding and prevent synechiae or restenosis. Our aim is to highlight this complication, propose a safe method for its diagnosis and establish guidelines for its prevention. We report two cases of paraffinoma occurring after rhinoplasty and discuss prevention of this rare but serious complication, and suggest an alternative dressing. Attenuated total reflection (ATR) FI7R spectra have proven to be a definitive characterising tool for surgical extracts, guaranteeing detection of mineral products that histology does not offer. For these lesions we propose the name "petroleum oilomas" which we feel to be more appropriate than the more commonly used paraffinomas. Relevance of the work: a description of an innovative and safe method of diagnosis, and proposal of a procedure for postrhinoplasty packing (without mineral oils) to avoid this complication.
Surfactants are amphiphilic compounds which can reduce surface and interfacial tensions by accumulating at the interface of immiscible fluids and increase the solubility, mobility, bioavailability and subsequent biodegradation of hydrophobic or insoluble organic compounds. Chemically synthesized surfactants are commonly used in the petroleum, food and pharmaceutical industries as emulsifiers and wetting agents. Biosurfactants produced by some microorganisms are becoming important biotechnology products for industrial and medical applications due to their specific modes of action, low toxicity, relative ease of preparation and widespread applicability. They can be used as emulsifiers, de-emulsifiers, wetting and foaming agents, functional food ingredients and as detergents in petroleum, petrochemicals, environmental management, agrochemicals, foods and beverages, cosmetics and pharmaceuticals, and in the mining and metallurgical industries. Addition of a surfactant of chemical or biological origin accelerates or sometimes inhibits the bioremediation of pollutants. Surfactants also play an important role in enhanced oil recovery by increasing the apparent solubility of petroleum components and effectively reducing the interfacial tensions of oil and water in situ. However, the effects of surfactants on bioremediation cannot be predicted in the absence of empirical evidence because surfactants sometimes stimulate bioremediation and sometimes inhibit it. For medical applications, biosurfactants are useful as antimicrobial agents and immunomodulatory molecules. Beneficial applications of chemical surfactants and biosurfactants in various industries are discussed in this review.
The number of microorganisms of major metabolic groups and the rates of sulfate-reducing and methanogenic processes in the formation waters of the high-temperature horizons of Dagang oilfield have been determined. Using cultural methods, it was shown that the microbial community contained aerobic bacteria oxidizing crude oil, anaerobic fermentative bacteria, sulfate-reducing bacteria, and methanogenic bacteria. Using cultural methods, the possibility of methane production from a mixture of hydrogen and carbon dioxide (H2 + CO2) and from acetate was established, and this result was confirmed by radioassays involving NaH14CO3 and 14CH3COONa. Analysis of 16S rDNA of enrichment cultures of methanogens demonstrated that these microorganisms belong to Methanothermobacter sp. (M. thermoautotrophicus), which consumes hydrogen and carbon dioxide as basic substrates. The genes of acetate-utilizing bacteria were not identified. Phylotypes of the representatives of Thermococcus spp. were found among 16S rDNAs of archaea. 16S rRNA genes of bacterial clones belong to the orders Thermoanaerobacteriales (Thermoanaerobacter, Thermovenabulum, Thermacetogenium, and Coprothermobacter spp.), Thermotogales, Nitrospirales (Thermodesulfovibrio sp.) and Planctomycetales. 16S rDNA of a bacterium capable of oxidizing acetate in the course of syntrophic growth with H2-utilizing methanogens was found at high-temperature petroleum reservoirs for the first time. These results provide further insight into the composition of microbial communities of high-temperature petroleum reservoirs, indicating that syntrophic processes play an important part in acetate degradation accompanied by methane production.
Petroleum oil spill happens occasionally at sea. It's important to differentiate the exact products in order to carry out following actions to decrease harmfulness. In the present study, a rapid oil spill identification method by near infrared spectroscopy coupled with pattern recognition techniques is proposed. 56 simulated spilled oils of gasoline, diesel fuel and lubricating oil in marine were chosen to develop the method. Organic reagent of CCl4 was used to extract the oil. Pattern recognition techniques were established by principal component analysis (PCA) coupled with Mahalanobis' distance with the multiplicative signal correction (MSC) and Norris first derivative pretreatment. The study shows that PCA technique is a useful method to extract the main characteristics, and Mahalanobis' distance is an ellipsoidal boundary that circumscribes a data cluster. And oil spill samples with concentration above 0.4 microL x mL(-1) can be successfully identified by the method. The developed technique could be further applied to the identification of spilled oil in marine.
Methods were developed for the demonstration and determination of perchlorethylene and petrol in rendered fats and meals for feeding purposes. The methods are based on the collection and the vapours of extracting media over samples of rendering-plant products and on their identification and determination by gas chromatography. Under the conditions of the method, the limit of perchlorethylene extractibility is 0.05% and the limit of petrol extractibility is 0.01% (weight). Under adapted conditions the two limits can be reduced. The reproducibility of the results at practically occuring concentrations of residues in products is characterized by the value of the variation coefficient which reaches 2.79 in perchlorethylene and 6.05 in petrol. The maximum duration of the analysis of one sample is five minutes. In all media have been demonstrated to be present. Their content was high and considerably variable in the fats from rendering plants; in meat-bone meals from petrol extraction the content of residues reached only trace values. It is recommended to use the presented analytic methods for thorough and regular objective control of the residues of extracting media in the products of rendering plants for feeding purposes.