Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Colloids”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39Linked to original sources

Preparation of colloidal gold for staining proteins electrotransferred onto nitrocellulose membranes.

This paper describes a simple method of preparing colloidal gold for staining protein blots. Colloidal gold was prepared from 0.005 or 0.01% HAuCl4 by the addition of formalin as a reductant and potassium hydroxide. Staining of small cell carcinoma tissue extract blotted onto nitrocellulose membranes with this colloidal gold solution resulted in the appearance of a large number of clear wine-red bands. The sensitivity of gold staining was 60 times higher than that of Coomassie brilliant blue staining and almost comparable to that of silver staining of proteins in polyacrylamide gel. The sensitivity of this method was also satisfactory in comparison with that of enzyme immunoblotting. The colloidal gold prepared by this method is usable for routine work.

Blotting, Western↗

Analysis of colloidal gold probes by isoelectric focusing in agarose gels.

Colloidal gold particles of different size (3-20 nm in diameter) were prepared by tannic acid-citrate and citrate reduction methods. From these colloids, different probes were prepared using sheep anti-rabbit antiserum, sheep anti-rabbit IgG, bovine serum albumin, polyethylene glycol, and protein A as the primary stabilizers and polyethylene glycol and/or bovine serum albumin as secondary and tertiary stabilizers, in different combinations. The probes were analyzed by isoelectric focusing in agarose gels, which allow the migration of particles in the size range 3-20 nm. (P. Sewer and S. J. Hayes, 1986, Anal. Biochem. 158, 72-78). Isoelectric focusing revealed that the surface charge of colloidal gold probes is dependent upon the size of the gold particle, the reduction method used, the primary ligand, and the pH at which this is adsorbed, as well as upon the secondary and tertiary stabilizers used. It is proposed that such differences in surface charge may underlie the different results which may sometimes be observed in colloidal gold labeling, especially when novel ligands are used.

Colloids↗

Solid core liposomes with encapsulated colloidal gold particles.

Solid core liposomes with encapsulated colloidal gold particles were prepared through four major steps: Preparation of prevesicles with encapsulated solid cores of agarose-gelatin by emulsification of agarose-gelatin sol in organic solvent containing emulsifiers followed by cooling. Extraction of lipophilic components from prevesicles to obtain microspherules of agarose-gelatin. Introducing colloidal gold particles into microspherules and coating with protein molecules. Encapsulation of colloidal gold-bearing microspherules with the modified organic solvent spherule evaporation method for preparation of liposomes (Kim et al. (1983) Biochim. Biophys. Acta 728, 339-348 and Kim et al. (1984) Biochim. Biophys. Acta 812, 793-801). Electron micrographs showed that if liposomes were prepared by using a lipid mixture containing dioleoylphosphatidylcholine/cholesterol/dioleoylphosphatidylglycerol/tri olein (molar ratio 4.5:4.5:1:1), there was only a single continuous bilayer membrane for each solid core liposome. However, if no triolein was added to the lipid mixture, it would cause the formation of multilamellar liposomes. In both cases, there were hundreds to thousands of colloidal gold particles within each solid core liposome.

Cholesterol↗

Detection of fecal blood by colloidal gold agglutination using an anti-human hemoglobin monoclonal antibody.

Monoclonal antibodies to human hemoglobin were produced and a colloidal gold agglutination method has been developed for detection of fecal occult blood. Since hemoglobin is composed of the tetramer, alpha 2 beta 2, a single monoclonal antibody-labeled colloidal gold can agglutinate with hemoglobin. The lowest detectable hemoglobin concentration was 0.5 micrograms/ml. A total of 785 fecal samples were determined using colloidal gold agglutination and compared with latex agglutination. The colloidal gold agglutination detected blood in 75 samples, whereas latex agglutination detected blood in 76 samples, and among them 70 were positive in both methods. Overall agreement between the two methods was 98%.

Agglutination↗

Therapeutic efficacy of the alpha-emitter 211At bound on microspheres compared with 90Y and 32P colloids in a murine intraperitoneal tumor model.

alpha-Emitting radionuclides such as 211At have a number of physical characteristics which make them attractive for the treatment of micrometastases. 211At was bound to polymer microspheres and its efficacy was compared with the beta-emitting 32P and 90Y colloids for the treatment of intraperitoneally growing K13 hybridoma tumors in mice. Single graded doses of 0.1-2.5 MBq 211At microspheres injected intraperitoneally 24 hr after inoculation of the hybridoma cells improved survival and produced higher cure rates than 32P colloid, 90Y colloid, or no treatment. One of the most striking contrasts between 211At microspheres and 90Y or 32P colloids was the ability of relatively low doses 211At to affect cures. When comparing the groups with the highest survival rate for each radionuclide (0.1-1 MBq 211At, 2.5 MBq 90Y, and 2.5 MBq 32P), 211At treatment resulted in an improved survival over that with 32P therapy, but the difference was not significant between 211At and 90Y. Toxicity studies with 211At microspheres showed that dosages up to 17 MBq per mouse were not lethal. In conclusion, the present study suggests that the high-energy transfer and the short-range cytotoxicity of the alpha-emitter 211At might be of benefit for intracavitary radiotherapy.

Animals↗

Effect of heta-starch colloidal solutions on reticuloendothelial phagocytic system (RES) function in burned and infected rats.

The biodistribution of the plasma expander colloidal solution, heta-starch (HES), has been examined in rats, subjected to thermal injury or sepsis. The ability of these solutions to alter RES phagocytic function of [99mTc]-sulphur colloid ([99mTc]SC) uptake in vivo has been examined. The biodistribution of radiolabelled HES has been determined in normal rats. The HES colloidal solution has no deleterious effect upon RES function in vivo in the thermally injured animals or the septic animals as compared to sham controls. In addition, the HES colloidal solution seemed to be distributed primarily within the liver, spleen and kidney, with a small amount residing in the lung. Thermal injury did not increase the uptake of this material by the lung. These results suggest that the use of HES in thermally injured and septic individuals has no deleterious effects on RES function, nor does it accumulate in the lungs, and hence, should be advocated for use in these situations.

Animals↗

A functionalized superparamagnetic iron oxide colloid as a receptor directed MR contrast agent.

We have synthesized a surface functionalized superparamagnetic iron oxide colloid whose clearance from the vascular compartment was inhibited by asialofetuin but not fetuin. Unlike other particulate or colloidal magnetic resonance (MR) contrast agents, the agent of the current communication is not withdrawn from the vascular compartment by cells of the macrophage-monocyte phagocytic system, as indicated by its selective increase in hepatic relaxation rates. Because of this we refer to this colloid as a hepatic selective (HS) MR contrast agent. At 20 mumol Fe/kg the HS MR agent darkened MR images of liver. The HS MR agent exhibited no acute toxicity when injected into rats at 1800 mumol Fe/kg. Based on these observations, surface functionalized superparamagnetic iron oxide colloids may be the basis of MR contrast agents internalized by receptor mediated endocytosis generally, and by the asialoglycoprotein receptor in particular.

Animals↗

Magnetic colloids for the generic capture of viruses.

In molecular biology or in the diagnostic field, a strong interest has been devoted to the use of magnetic nanoparticles as an efficient tool for a fast and easy biomolecule extraction. Various methods allow the synthesis of numerous types of magnetic particles, but very few of them can be adapted to biological protocols. For biological tests based on the final detection of nucleic acids, the major difficulties in the choice of these magnetic beads are their fast magnetic separation, requiring a high magnetic oxide content and overall a good compatibility with enzymes used for nucleic acid amplification. In this study, magnetic colloids were obtained from oil in water (o/w) magnetic emulsion by a two-step polymer immobilization procedure. First, a polycation, poly(ethyleneimine), was adsorbed to ensure charge inversion of the emulsion droplets. Then poly(maleic anhydride-co-methyl vinyl ether) was either chemically grafted or adsorbed if under its hydrolyzed form. The obtained colloids were characterized in terms of colloidal stability, surface charge density, and morphology and were evaluated in a reverse transcription-PCR (RT-PCR) inhibition test. Selected colloids were used for the nonspecific capture of viruses, with RT-PCR being used as a means of detection. Particle size and charge studies allowed us to follow each step of their synthesis, showing the relevance of these methods. The prepared magnetic particles exhibit a good RT-PCR compatibility when used in the range of 5-40 microg in the 50 microl amplification mix. Finally, virus capture tests revealed a capture efficiency of 90% with an average detection sensitivity of 10(3)pfu/ml.

Chromatography, Gel↗

A chemiluminescent metalloimmunoassay based on silver deposition on colloidal gold labels.

A sensitive chemiluminescent (CL) immunoassay of human immunoglobulin (IgG) which combined the inherent high sensitivity of CL analysis with the dramatic signal amplification of silver precipitation on colloidal gold tags was developed. First, the sandwich-type complex was formed in this protocol by the primary antibody immobilized on the polystyrene wells, the analyte in the sample, and the secondary antibody labeled with colloidal gold. Second, the colloidal gold was treated by an Ag(+) reduction solution, which resulted in the catalytic precipitation of silver on the surface of colloidal gold. Third, a large number of Ag(+) were oxidatively released in HNO(3) solution from the silver metal anchored on the sandwich-type complexes and then the human IgG was indirectly determined by a sensitive combined CL reaction of Ag(+)-K(2)S(2)O(8)-Mn(2+)- H(3)PO(4)-luminol. The chemiluminescence intensity depends linearly on the logarithm of the concentration of human IgG over the range of 0.02-50ngml(-1) and detection limit (3sigma) is 0.005ngml(-1) (i.e., approximately 3x10(-14)M, 3amol in 100-mul sample). This assay has been successfully applied to the determination of human IgG in human serum samples and showed great potential for numerous applications in immunoassay.

Animals↗

Oxidation of gum arabic by soluble colloidal MnO2.

In the present work, the oxidative degradation of gum arabic by colloidal manganese dioxide (MnO2) was carried out. Monitoring the disappearance of the MnO2 spectrophotometrically at 375 nm was used to follow the kinetics. The oxidation obeyed fractional-order kinetics with respect to the [gum arabic]. Effect of various experimental parameters such as the initial colloidal [MnO2], [HClO4], temperature, and complexing agents (P2O7(4-), F-, and Mn2+) for the oxidation of gum arabic was studied. The reaction was acid catalyzed. Addition of P2O(7)4-, F-, and Mn2+ ions enhances the rate of oxidation significantly. Gum arabic adsorbs onto the surface of the colloidal MnO2 through the equatorial -OH groups of the rhamnose moiety, and the complex breaks down into products. The Arrhenius equation was valid for the oxidation kinetics between 40 and 60 degrees C. To explain the observed kinetic results, a suitable mechanism and rate law for the reaction taking place at the surface of the colloidal particle has been proposed. The reducing nature of gum arabic is found be due to the presence of -OH group in the skeleton.

Colloids↗

Imaging of a soft, weakly adsorbing, living cell with a colloid probe tapping atomic force microscope technique.

Here, we propose a new method to improve the atomic force microscopy (AFM) image resolution of soft samples, such as cells, in liquid. Attaching a colloid probe to a cantilever was seen improve the image resolution of a living cell in a physiological buffer solution, obtained by the normal tapping mode, when compared to an image obtained using a regular cantilever tip. This may be due to the averaging out of the cantilever tip swinging caused by the visco-elasticity of the cell. The resolution was best, when silica spheres with a 3.3 microm diameter were attached. Although larger spheres gave a resolution better than a bare cantilever tip, their resolution was less than that obtained for the 3.3 microm diameter silica colloid. This dependency of the image resolution on the colloid probe size may be a result of the increased macroscopic van der Waals attraction between the cell and probe, the decreased repulsive force dependence on the cantilever probe radius, and the decrease in resolution due to the increased probe size. The size of the colloid probe, which should be attached to the cantilever to give the best image resolution, would be the one that optimises the combined result of these facts.

Animals↗

Parameters affecting the adhesion strength between a living cell and a colloid probe when measured by the atomic force microscope.

In this study, we used the colloid probe atomic force microscopy (AFM) technique to investigate the adhesion force between a living cell and a silica colloid particle in a Leibovitz's L-15 medium (L-15). The L-15 liquid maintained the pharmaceutical conditions necessary to keep the cells alive in the outside environment during the AFM experiment. The force curves in such a system showed a steric repulsion in the compression force curve, due to the compression of the cells by the colloid probe, and an adhesion force in the decompression force curve, due to binding events between the cell and the probe. We also investigated for the first time how the position on the cell surface, the strength of the pushing force, and the residence time of the probe at the cell surface individually affected the adhesion force between a living cell and a 6.84 microm diameter silica colloid particle in L-15. The position of measuring the force on the cell surface was seen not to affect the value of the maximum adhesion force. The loading force was also seen not to notably affect the value of the maximum adhesion force, if it was small enough not to pierce and damage the cell. The residence time of the probe at the cell surface, however, clearly affected the adhesion force, where a longer residence time gave a larger maximum force. From these results, we could conclude that the AFM force measurements should be made using a loading force small enough not to damage the cell and a fixed residence time, when comparing results of different systems.

Aluminum Silicates↗

Complex electrooptic research of nano-particle parameters in colloids.

A research of some colloids has been carried out by means of dynamic light scattering, electrooptical and magnetooptical techniques. Intensity autocorrelation functions of scattered light have been compared to the relaxation curves of electrooptical effect for colloid particles of different shapes. The results of complex research confirm that the complicated character of light scattering by particles allows us to use the methods of birefringence and dichroism only formally when studying most colloid systems. Very thin nano-disperse structures are an exception to this rule. The investigation of polydispersity of some colloids was carried out by magnetooptical and two electrooptical techniques. Size distribution functions resulted from the different techniques agree. This justifies the suppositions about particle light scattering that are required for the use of the methods.

Alkanes↗

Correlation between dispersion properties of TiO2 colloidal sols and photoelectric characteristics of TiO2 films.

TiO2 film for use as dye-sensitized solar cell was prepared using the TiO2 colloidal sols (unpeptized sol and peptized sol). The optical properties and photocurrent-voltage characteristics of the resultant films were investigated. The optical transmittance of TiO2 thin film prepared from the peptized colloidal sol was over 90%, while that of TiO2 film from the unpeptized sol was under 80%. The TiO2 photoelectrode prepared from the peptized colloidal sol showed low photoelectric conversion efficiency (eta), 1.30%, whereas the efficiency of photoelectrode from the unpeptized sol was 2.21%. The high optical transmittance and low conversion efficiency of TiO2 film from the peptized sol are discussed in terms of dense microstructure due to the drying nature of well-dispersed colloidal sol.

Colloids↗

Hofmeister effects on the colloidal stability of an IgG-coated polystyrene latex.

The effect of various ions related to the Hofmeister series (HS) on different properties of a cationic latex covered with a protein (IgG) is analyzed in this study. NaNO3, NH4NO3, and Ca(NO3)2 were used to compare the specificity of the cations, and NaCl, NaSCN, NaNO3, and Na2SO4, to compare the specificity of the anions. Two pH values, 4 and 10, were chosen to analyze the behavior of these ions acting as counter- and co-ions. At pH 4, the total surface charge is positive, whereas at pH 10 it is negative. Three different phenomena have been studied in the presence of these Hofmeister ions: (1) colloidal aggregation, (2) electrophoretic mobility, and (3) colloidal restabilization. The specific effect of the ions was clearly observed in all experiments, obtaining ion sequences ordered according to their specificity. The most important parameter for ion ordering was the sign of the charge of the colloidal particle. Positively charged particles displayed an ion order opposite that observed for negatively charged surfaces. Another influential factor was the hydrophobic/hydrophilic character of the particle surface. IgG-latex particle surfaces at pH 10 were more hydrophilic than those at pH 4. The SCN- ion had a peculiar specific effect on the phenomena studied (1)-(3) at pH 10. With respect to the restabilization studies at high ionic strengths, new interesting results were obtained. Whereas it is commonly known that cations may provoke colloidal restabilization in negative particles when they act as counterions, our experiments demonstrated that such restabilization is also possible with positively charged particles. Likewise, restabilization of negative surfaces induced by the specific effect of chaotropic anions (acting as co-ions) was also observed.

Adsorption↗

Dynamic behaviour of river colloidal and dissolved organic matter through cross-flow ultrafiltration system.

Through cross-flow filtration (CFF) with a 1-kDa regenerated cellulose Pellicon 2 module, the ultrafiltration characteristics of river organic matter from Longford Stream, UK, were investigated. The concentration of organic carbon (OC) in the retentate in the Longford Stream samples increased substantially with the concentration factor (cf), reaching approximately 40 mg/L at cf 15. The results of dissolved organic carbon (DOC) and colloidal organic carbon (COC) analysis, tracking the isolation of colloids from river waters, show that 2 mg/L of COC was present in those samples and good OC mass balance (77-101%) was achieved. Fluorescence measurements were carried out for the investigation of retentate and permeate behaviour of coloured dissolved organic materials (CDOM). The concentrations of CDOM in both the retentate and permeate increased with increasing cf, although CDOM were significantly more concentrated in the retentate. The permeation model expressing the correlation between log[CDOM] in the permeate and logcf was able to describe the permeation behaviour of CDOM in the river water with regression coefficients (r(2)) of 0.94 and 0.98. Dry weight analysis indicated that the levels of organic colloidal particles were from 49 to 71%, and between 29 and 51% of colloidal particles present were inorganic. COC as a percentage of DOC was found to be 10-16% for Longford Stream samples.

Colloids↗

Release of colloidal particles in natural porous media by monovalent and divalent cations.

We study mobilization of colloidal particles from natural porous media, such as soils and groundwater aquifers. Extensive laboratory scale column experiments of particle release from four different subsurface materials are presented. The important characteristics of the release process are (i) its non-exponential kinetics, (ii) the finite supply of colloidal particles and (iii) the strong dependence of the release kinetic on the nature of the adsorbed cations. Particle release depends most sensitively on the relative saturation of the medium with divalent cations. We propose a mathematic model, which captures all these aspects quantitatively, and can be used to describe the coupling between transport of major cations and the release of colloidal particles. The present experimental investigations as well as the developed modeling framework represent an important step towards the understanding of colloid-facilitated transport phenomena in natural porous media.

Cations↗

Silver-enhanced colloidal gold metalloimmunoassay for Schistosoma japonicum antibody detection.

A silver-enhanced colloidal gold metalloimmunoassay has been proposed for the determination of Schistosoma japonicum antibody (SjAb) in rabbit serum. The adult worm antigen of S. japonicum (SjAg) was adsorbed passively on the walls of a polystyrene microwell and then reacted with the desired SjAb. The colloidal gold-labeled goat anti-rabbit IgG secondary antibody was adsorbed on the walls of the polystyrene microwells through the reaction with SjAb, followed by the silver enhancement process, dissolution of silver metal atoms in an acidic solution, and determination of dissolved silver ions by anodic stripping voltammetry (ASV) at a glassy-carbon electrode. Assay conditions were optimized, including the reaction time of SjAg with SjAb, the interaction of SjAb with the colloidal gold-labeled secondary antibody, the dilution ratio of the colloidal gold-labeled secondary antibody and the silver enhancement time. The integration of the anodic stripping peak current depended linearly on the SjAb logarithmic concentration over the range of 6.4 ng/ml to 100 microg/ml. A detection limit as low as 3.0 ng/ml SjAb was achieved, which was better than the piezoelectric body acoustic wave sensor (detection limit of 7.2 microg/ml) and the renewable amperometric immunosensor (detection limit of 0.36 microg/ml). Rabbit serum samples with various degrees of infection were analyzed, and the results demonstrate that the proposed method meets the requirements of clinical analysis.

Animals↗