Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Assembly process”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 703 records · Page 39Linked to original sources
PubMed1984

[Synthesis of 10S particles in cells infected with aphthovirus].

In the present study, evidence is presented for the existence of a morphogenetic intermediary that may be a precursor of the procapsids in the assembling process. BHK21 clone 13S cells were infected with Aphthovirus A24 (Cruzeiro strain), and pulse-chase experiments were carried out using 3H-leucine. Cytoplasmic extracts were then prepared at appropriate times, and analyzed by sucrose-gradient ultracentrifugation. After preliminary assays (Fig. 1), working conditions were standardized so as to obtain maximal recovery of the morphogenetic intermediary, as well as consistency of results. Only in the presence of DOC-Brij58 and Mg++ could a 10S sedimentation coefficient peak be seen (Fig. 1 a). A heterogeneous zone, with 4,5-5S as sedimentation coefficient, was also observed. The degree of labeling in the region 4,5-5S compared with that in the 10S portion, depends on the time within the infectious cycle when cells were pulse-labeled. Maximal levels for the ratio 10S/4,5-5S are reached when pulse-labeling takes place at the time when the amount of RNA viral synthesis reaches 80% of its total value (Fig. 2). Similar experiments, performed with third passage bovine fetal kidney cells, were confirmatory of the presence of a structure sedimenting at 10S, as well as of a heterogeneous zone of 4,5-5S (Fig. 3). It would appear that assembling of Aphthoviruses is accomplished through an intermediary unit which differs from that found for other Picornaviruses, the latter being the result of the union of 12 pentamers. The capsid of Aphthoviruses, also composed of 60 identical sub-units, would instead derive from the joining of 20 trimers.(ABSTRACT TRUNCATED AT 250 WORDS)

Animals↗
PubMed1984

The formation of a defective small subunit of the mitochondrial ribosomes in petite mutants of Saccharomyces cerevisiae.

The involvement of mitochondrial protein synthesis in the assembly of the mitochondrial ribosomes was investigated by studying the extent to which the assembly process can proceed in petite mutants of Saccharomyces cerevisiae which lack mitochondrial protein synthetic activity due to the deletion of some tRNA genes and/or one of the rRNA genes on the mtDNA. Petite strains which retain the 15-S rRNA gene can synthesize this rRNA species, but do not contain any detectable amounts of the small mitochondrial ribosomal subunit. Instead, a ribonucleoparticle with a sedimentation coefficient of 30 S (instead of 37 S) was observed. This ribonucleoparticle contained all the small ribosomal subunit proteins with the exception of the var1 and three to five other proteins, which indicates that the 30-S ribonucleoparticle is related to the small mitochondrial ribosomal subunit (37 S). Reconstitution experiments using the 30-S particle and the large mitochondrial ribosomal subunit from a wild-type yeast strain indicate that the 30-S particle is not active in translating the artificial message poly(U). The large mitochondrial ribosomal subunit was present in petite strains retaining the 21-S rRNA gene. The petite 54-S subunit is biologically active in the translation of poly(U) when reconstituted with the small subunit (37 S) from a wild-type strain. The above results indicate that mitochondrial protein synthetic activity is essential for the assembly of the mature small ribosomal subunit, but not for the large subunit. Since the var1 protein is the only mitochondrial translation product known to date to be associated with the mitochondrial ribosomes, the results suggest that this protein is essential for the assembly of the mature small subunit.

DNA, Mitochondrial↗
PubMedDate not supplied

On the optimal ratio of heavy to light chain genes for efficient recombinant antibody production by CHO cells.

Monoclonal antibodies (Mab) are heterotetramers consisting of an equimolar ratio of heavy chain (HC) and light chain (LC) polypeptides. Accordingly, most recombinant Mab expression systems utilize an equimolar ratio of heavy chain (hc) to light chain (lc) genes encoded on either one or two plasmids. However, there is no evidence to suggest that this gene ratio is optimal for stable or transient production of recombinant Mab. In this study we have determined the optimal ratio of hc:lc genes for production of a recombinant IgG4 Mab, cB72.3, by Chinese hamster ovary (CHO) cells using both empirical and mathematical modeling approaches. Polyethyleneimine-mediated transient expression of cB72.3 at varying ratios of hc:lc genes encoded on separate plasmids yielded an optimal Mab titer at a hc:lc gene ratio of 3:2; a conclusion confirmed by separate mathematical modeling of the Mab folding and assembly process using transient expression data. On the basis of this information, we hypothesized that utilization of hc genes at low hc:lc gene ratios is more efficient. To confirm this, cB72.3 Mab was transiently produced by CHO cells at constant hc and varying lc gene dose. Under these conditions, Mab yield was increased with a concomitant increase in lc gene dose. To determine if the above findings also apply to stably transfected CHO cells producing recombinant Mab, we compared the intra- and extracellular ratios of HC and LC polypeptides for three GS-CHO cells lines transfected with a 1:1 ratio of hc:lc genes and selected for stable expression of the same recombinant Mab, cB72.3. Intra- and extracellular HC:LC polypeptide ratios ranged from 1:2 to 1:5, less than that observed on transient expression of the same Mab in parental CHO cells using the same vector. In conclusion, our data suggest that the optimal ratio of hc:lc genes used for transient and stable expression of Mab differ. In the case of the latter, we infer that optimal Mab production by stably transfected cells represents a compromise between HC abundance limiting productivity and the requirement for excess LC to render Mab folding and assembly more efficient.

Animals↗
PubMed1993

Relating structure to function in the hepatitis delta virus antigen.

Hepatitis delta virus expresses two forms of a single protein, the small (delta Ag-S) and large (delta Ag-L) antigens, which are identical except for an additional 19 residues present at the C terminus of delta Ag-L. While delta Ag-S is required to promote genome replication, delta Ag-L potently inhibits this process and also facilitates packaging of the viral genome by envelope proteins of the helper virus (hepatitis B virus). Regions within the antigens responsible for nuclear localization, RNA binding, and dimerization have been identified, yet it is not clear how these particular activities contribute to the ultimate replication and packaging phenotypes. Here we report the following findings. (i) Although the removal of the nuclear localization signal from either antigen resulted in significant cytoplasmic accumulation, both proteins still had access to the nucleus. As a consequence, no functional defect was observed with either mutant. (ii) The RNA-binding domain, although necessary for delta Ag-S function, could be deleted from delta Ag-L without compromising its ability to either inhibit replication or promote packaging. (iii) In contrast, the coiled-coil dimerization domain was required for both the activation of replication by delta Ag-S and the inhibition of replication by delta Ag-L. This region, with an additional 20 amino acids C-terminal to it, was necessary and sufficient to potently inhibit replication by interacting with the small antigen. (iv) The packaging property of delta Ag-L required a C-terminal Pro/Gly-rich region which is hypothesized to interact with the hepatitis B virus envelope proteins during the assembly process.

Antigens, Viral↗
PubMed2001

Mesostructured materials for optical applications: from low-k dielectrics to sensors and lasers.

Recent advances on the use of mesoporous and mesostructured materials for electronic and optical applications are reported. The focus is on materials which are processed by block-copolymer templating of silica under weakly acidic conditions and by employing dip- and spin-coating as well as soft lithographic methods to bring them into a well-defined macroscopic shape. Several chemical strategies allow the mesostructure architecture to be used for electronic/optical applications: Removal of the block-copolymers results in highly porous, mechanically and thermally robust materials which are promising candidates for low dielectric constant materials. Since the pores are easily accessible, these structures are also ideal hosts for optical sensors, when suitable are incorporated during synthesis. For example, a fast response optical pH sensor was implemented on this principle. As-synthesized mesostructured silica/block-copolymer composites, on the other hand, are excellently suited as host systems for laser dyes and photochromic molecules. Laser dyes like rhodamine 6G can be incorporated during synthesis in high concentrations with reduced dimerization. This leads to very-low-threshold laser materials which also show a good photostability of the occluded dye. In the case of photochromic molecules, the inorganic-organic nanoseparation enables a fast switching between the colorless and colored form of a spirooxazine molecule, attributed to a partitioning of the dye between the block-copolymer chains. The spectroscopic properties of these dye-doped nanocomposite materials suggest a silica/block-copolymer/dye co-assembly process, whereby the block-copolymers help to highly disperse the organic dye molecules.

Electronics↗
PubMed2004

An in situ toxicity identification evaluation method Part II: Field validation.

When sediments are found to be toxic usually there is a mixture of chemicals present. Often it is important to establish which chemicals contribute to the toxicity. Establishing causality can be difficult and often requires fractionation with subsequent toxicity testing. The sample collection and manipulation process can alter chemical bioavailability and toxicity. An in situ toxicity identification evaluation (iTIE) chamber is described that was placed in sediments and fractionated pore-water chemicals into nonpolar chemicals, metals, and ammonia-type groups. This method was field tested and compared to the laboratory-based, U.S. Environmental Protection Agency (U.S. EPA) toxicity identification evaluation (TIE) method. Field studies were performed at three sites contaminated primarily with polycyclic aromatic hydrocarbons (PAHs) (Little Scioto River, OH, USA), polychlorinated biphenyls (PCBs) (Dicks Creek, OH, USA), and chlorobenzenes (Sebasticook River, ME, USA). Both the iTIE and the U.S. EPA TIE methods used Daphnia magna in 24-h exposures. Although the iTIE and TIE were conducted on sediments from the same location, there was significantly more toxicity observed in the iTIE testing. The dominant chemical classes were separated by the iTIE method and revealed which fractions contributed to toxicity. The loss of toxicity in the TIE approach did not allow for subsequent fractionation and stressor identification. Advantages of the iTIE over the TIE method were greater sensitivity and ability to detect causative toxic chemical fractions; lack of sediment collection and subsequent manipulation; and, thus, reduction in potential artifacts, more realistic exposure with slow, continual pore-water renewal in situ, ability to evaluate pore waters in sandy or rocky substrates where pore waters are difficult to collect, and a quicker phase I evaluation. Limitations of the iTIE method as compared to the TIE methods were extensive pretest assembly process, fewer phase I fractionation possibilities, and restriction to shallow waters. The results of these studies suggest that the iTIE method provides a more accurate and sensitive evaluation of pore water toxicity than the laboratory TIE method.

Animals↗
PubMed2006

Mechanistic study of the electrodeposition of nanoporous self-assembled ZnO/Eosin Y hybrid thin films: effect of eosin concentration.

ZnO films prepared by one-step electrodeposition in the presence of dissolved eosin molecules present an internal nanoporous hybrid structure resulting from self-assembling processes occurring in solution between ZnO and eosin components. This study aims to better understand the underlying growth mechanism, which is still unexplained. The films were deposited by cathodic electrodeposition from an oxygen-saturated aqueous zinc chloride solution. The effects of the addition of 10 to 100 micromol.L(-1) eosin Y, as a sodium salt, on the growth rate and film properties, were systematically studied while all other parameters remained constant (concentrations of zinc salt and supporting electrolyte, applied potential of -1.4 V versus the mercurous sulfate electrode (MSE), temperature of 70 degrees C, rotating disk electrode at 300 rotations per min, and a glass-coated tin oxide electrode). It is shown that the addition of eosin provokes the formation of a nanoporous "cauliflower" structure whose nodule size and composition depend on the eosin concentration in the bath. The growth rate of the hybrid films increases markedly with the eosin concentration. The ZnO and eosin contents of the films are determined for each concentration by chemical analysis. Comparing with thickness determinations, it is shown that the total porosity increases up to 60-65% in volume fraction toward an eosin concentration of 100 micromol.L(-1). The empty pore volume fraction increases up to about 30% at an eosin concentration of about 20 micromol.L(-1) and then decreases. These correlations have been precisely established for the first time. It is shown that the global composition is fixed by the relative rate of deposition for zinc oxide, which is constant, and for the relative rate of eosin inclusion, which is proportional to the concentration in solution. This is explained on the basis of different steps in the growth mechanism, in particular, a diffusion effect limitation for both oxygen and eosin. This variation explains part of the increase in the growth rate. Another contribution is related by the structural effect on the nanoscale leading to the formation of the interpenetrated porous network. Competition between empty and eosin-filled parts of the pore network is evidenced. The formation of the porous network structure could be governed by a diffusion-limited aggregation mechanism. The system may represent a reference case of competing reactions in the electrochemical self-assembly of hybrid nanostructures.

Electrochemistry↗
PubMed2005

Structure and assembly of a T=1 virus-like particle in BK polyomavirus.

In polyomaviruses the pentameric capsomers are interlinked by the long C-terminal arm of the structural protein VP1. The T=7 icosahedral structure of these viruses is possible due to an intriguing adaptability of this linker arm to the different local environments in the capsid. To explore the assembly process, we have compared the structure of two virus-like particles (VLPs) formed, as we found, in a calcium-dependent manner by the VP1 protein of human polyomavirus BK. The structures were determined using electron cryomicroscopy (cryo-EM), and the three-dimensional reconstructions were interpreted by atomic modeling. In the small VP1 particle, 26.4 nm in diameter, the pentameric capsomers form an icosahedral T=1 surface lattice with meeting densities at the threefold axes that interlinked three capsomers. In the larger particle, 50.6 nm in diameter, the capsomers form a T=7 icosahedral shell with three unique contacts. A folding model of the BKV VP1 protein was obtained by alignment with the VP1 protein of simian virus 40 (SV40). The model fitted well into the cryo-EM density of the T=7 particle. However, residues 297 to 362 of the C-terminal arm had to be remodeled to accommodate the higher curvature of the T=1 particle. The loops, before and after the C-terminal short helix, were shown to provide the hinges that allowed curvature variation in the particle shell. The meeting densities seen at the threefold axes in the T=1 particle were consistent with the triple-helix interlinking contact at the local threefold axes in the T=7 structure.

BK Virus↗
PubMed2003

Envelopment of human cytomegalovirus occurs by budding into Golgi-derived vacuole compartments positive for gB, Rab 3, trans-golgi network 46, and mannosidase II.

Although considerable progress has been made towards characterizing virus assembly processes, assignment of the site of tegumentation and envelopment for human cytomegalovirus (HCMV) is still not clear. In this study, we examined the envelopment of HCMV particles in human lung fibroblasts (HF) HL 411 and HL 19, human umbilical vein endothelial cells, human pulmonary arterial endothelial cells, and arterial smooth muscle cells at different time points after infection by electron microscopy (EM), immunohistochemistry, and confocal microscopy analysis. Double-immunofluorescence labeling experiments demonstrated colocalization of the HCMV glycoprotein B (gB) with the Golgi resident enzyme mannosidase II, the Golgi marker TGN (trans-Golgi network) 46, and the secretory vacuole marker Rab 3 in all cell types investigated. Final envelopment of tegumented capsids was observed at 5 days postinfection by EM, when tegumented capsids budded into subcellular compartments located in the cytoplasm, in close proximity to the Golgi apparatus. Immunogold labeling and EM analysis confirmed staining of the budding compartment with HCMV gB, Rab 3, and mannosidase II in HL 411 cells. However, the markers Rab 1, Rab 2, Rab 7, Lamp 1 (late endosomes and lysosomes), and Lamp 2 (lysosomes) neither showed specific staining of the budding compartment in the immunogold labeling experiments nor colocalized with gB in the immunofluorescent colocalization experiments in any cell type studied. Together, these results suggest that the final envelopment of HCMV particles takes place mainly into a Golgi-derived secretory vacuole destined for the plasma membrane, which may release new infectious virus particles by fusion with the plasma membrane.

Cell Compartmentation↗
PubMed1998

Particle size determinants in the human immunodeficiency virus type 1 Gag protein.

The retroviral Gag protein plays the central role in the assembly process and can form membrane-enclosed, virus-like particles in the absence of any other viral products. These particles are similar to authentic virions in density and size. Three small domains of the human immunodeficiency virus type 1 (HIV-1) Gag protein have been previously identified as being important for budding. Regions that lie outside these domains can be deleted without any effect on particle release or density. However, the regions of Gag that control the size of HIV-1 particles are less well understood. In the case of Rous sarcoma virus (RSV), the size determinant maps to the CA (capsid) and adjacent spacer sequences within Gag, but systematic mapping of the HIV Gag protein has not been reported. To locate the size determinants of HIV-1, we analyzed a large collection of Gag mutants. To our surprise, all mutants with defects in the MA (matrix), CA, and the N-terminal part of NC (nucleocapsid) sequences produced dense particles of normal size, suggesting that oncoviruses (RSV) and lentiviruses (HIV-1) have different size-controlling elements. The most important region found to be critical for determining HIV-1 particle size is the p6 sequence. Particles lacking all or small parts of p6 were uniform in size distribution but very large as measured by rate zonal gradients. Further evidence for this novel function of p6 was obtained by placing this sequence at the C terminus of RSV CA mutants that produce heterogeneously sized particles. We found that the RSV-p6 chimeras produced normally sized particles. Thus, we present evidence that the entire p6 sequence plays a role in determining the size of a retroviral particle.

HIV Core Protein p24↗
PubMed1999

Second site mutations in the N-terminus of the major capsid protein (VP5) overcome a block at the maturation cleavage site of the capsid scaffold proteins of herpes simplex virus type 1.

VP5, the major capsid protein of herpes simplex virus type 1 (HSV-1), interacts with the C-terminal residues of the scaffold molecules encoded by the overlapping UL26 and UL26.5 open reading frames. Scaffold molecules are cleaved by a UL26 encoded protease (VP24) as part of the normal capsid assembly process. In this study, residues of VP5 have been identified that alter its interaction with the C-terminal residues of the scaffold proteins. A previously isolated virus (KUL26-610/611) was used that encoded a lethal mutation in the UL26 and UL26.5 open reading frames and required a transformed cell line that expresses these proteins for virus growth. The scaffold maturation cleavage site between amino acids 610 and 611 was blocked by changing Ala-Ser to Glu-Phe, which generated a new EcoRI restriction site. Revertant viruses, that formed small plaques on nontransformed cells, were detected at a frequency of 1:3800. Nine revertants were isolated, and all of them retained the EcoRI site and therefore were due to mutations at a second site. The second site mutations were extragenic. Using marker-transfer techniques, the mutation in one of the revertants was mapped to the 5' region of the gene encoding VP5. DNA sequence analysis was performed for the N-terminal 571 codons encoding VP5 for all of the revertant viruses. Six of the nine revertants showed a single base pair change that caused an amino acid substitution between residues 30 and 78 of VP5. Three of these were identical and changed Ala to Val at residue 78. The data provide a partial map of residues of VP5 that alter its interaction with scaffold proteins blocked at their normal cleavage site. The yeast two-hybrid system was used as a measure of the interaction between mutant VP5 and scaffold molecules and varied from 11% to nearly 100%, relative to wild-type VP5. One revertant gave no detectable interaction by this assay. The amount of UL26 encoded protease (VP24) in B capsids for KUL26-610/611 and for revertants was 7% and 25%, respectively, relative to the amount in capsids for wild-type virus. The lack of retention of the viral protease in the mutant virus and a fourfold increase for the revertants suggest an additional essential function for VP24 in capsid maturation, and a role in DNA packaging is indicated.

Capsid↗
PubMed2001

Mutations in the N-terminus of VP5 alter its interaction with the scaffold proteins of herpes simplex virus type 1.

During the assembly process of herpes simplex virus type 1 capsids, there is an essential interaction between the C-terminal tail of the scaffold proteins (22a and 21) and the major capsid protein (VP5). Recent studies of spontaneous revertant viruses that overcome a blocked maturation cleavage site of the scaffold proteins have shown that the N-terminus of VP5 is important for this interaction. One of the revertant viruses, PR7, encodes a second-site mutation at residue 69 of VP5 which unlike wild-type VP5 fails to interact with 22a and thus gives white colonies in the yeast two-hybrid assay. In the present study a small DNA fragment, encoding residues 1 to 85 of wild-type and PR7 VP5, was mutagenized using error-prone PCR. Mutagenized DNA was used in the yeast two-hybrid assay to identify mutations in wild-type VP5 that resulted in loss of 22a binding (white colonies), or in PR7 VP5 that resulted in a gain of function (blue colonies). For the loss of function experiments, using KOS VP5, a row of eight thymidine nucleotides (codons 37-40) resulted in many frameshift mutations, which led us to terminate the study without reaching a statistically significant result. For the PR7 experiment, 30 clones were identified that had single amino acid substitutions, and these mutations were localized to amino acids 27-45 and 63-84 of VP5. The most frequent mutation was a reversion back to wild-type. The next most frequent were E28K and N63S, and these gave the highest beta-galactosidase enzyme activities (indicative of PR7VP5-22a interaction), 30 and 20% of wild-type, respectively. When E28K and N63S were transferred into the wild-type VP5 background, that is, in the absence of the PR7 mutation, they gave rise to different phenotypes. The E28K mutation lost its ability to interact with the scaffold proteins as judged by this assay. Therefore, it may be acting as a compensatory mutation whose phenotype is only expressed in the presence of the original PR7 mutation. However, the N63S mutation in the wild-type VP5 background increased the interaction, as judged by the beta-galactosidase activity, by a factor of 9 relative to when the PR7 mutation was present. Even more surprising, in the absence of the PR7 mutation the enzyme activity was still greater, by a factor of 2, than that observed for wild-type VP5. This study provides further evidence that the N-terminus of VP5 is in intimate association with the C-terminus of the scaffold proteins.

Amino Acid Sequence↗
PubMed1998

Protein-like molecular architecture: biomaterial applications for inducing cellular receptor binding and signal transduction.

The development of biomaterials with desirable biocompatibility has presented a difficult challenge for tissue engineering researchers. First and foremost, materials themselves tend to be hydrophobic and/or thrombogenic in nature, and face compatibility problems upon implantation. To mediate this problem, researchers have attempted to graft protein fragments onto biomaterial surfaces to promote endothelial cell attachment and minimize thrombosis. We envisioned a novel approach, based on the capability of biomolecules to self-assemble into well-defined and intricate structures, for creating biomimetic biomaterials that promote cell adhesion and proliferation. One of the most intriguing self-assembly processes is the folding of peptide chains into native protein structures. We have developed a method for building protein-like structural motifs that incorporate sequences of biological interest. A lipophilic moiety is attached onto a N alpha-amino group of peptide chain, resulting in a "peptide-amphiphile." The alignment of amphiphilic compounds at the lipid-solvent interface is used to facilitate peptide alignment and structure initiation and propagation, while the lipophilic region absorbs to hydrophobic surfaces. Peptide-amphiphiles containing potentially triple-helical or alpha-helical structural motifs have been synthesized. The resultant head group structures have been characterized by CD spectroscopy and found to be thermally stable over physiological temperature ranges. Triple-helical peptide-amphiphiles have been applied to studies of surface modification and cell receptor binding. Cell adhesion and spreading was promoted by triple-helical peptide-amphiphiles. Cellular interaction with the type IV collagen sequence alpha 1(IV) 1263-1277 increased signal transduction, with both the time and level of induction dependent upon triple-helical conformation. Collectively, these results suggest that peptide-amphiphiles may be used to form stable molecular structure on biomaterial surfaces that promote cellular activities and improve biocompatibility.

Amino Acid Sequence↗
PubMed1997

Bifunctional fusion between nerve growth factor and a transferrin receptor antibody.

The cDNAs encoding the variable regions of the heavy and light chains of a murine antibody specific for the human TfR were cloned and a human chimera (gamma1, kappa) was produced. A gene fusion was created by joining the 3' end of the coding region of the human nerve growth factor (NGF) precursor to the 5' end of the heavy chain variable region of the chimeric antibody. When expressed with the unmodified light chain in mammalian cells, the protein fusion is properly processed, assembled, and secreted. Subsequent purification and characterization established the uncompromised bifunctional activities of the protein, relative to the unmodified components, as demonstrated by its ability to both bind to the human TfR and induce neurite outgrowth in primary sympathetic or spinal ganglia and in trkA-transfected pheochromocytoma cells. The ability to generate biologically active NGF fused to a TfR targeting antibody, which was previously shown to cross the blood-brain barrier, may offer a novel way to deliver NGF and other neurotrophic factors to the central nervous system.

Animals↗
PubMed2000

Immobilization of alliinase on porous aluminum oxide.

Membrane filters prepared from porous aluminum oxide (Anopore) were investigated for their potential use as a durable support for enzymes. Alliinase (EC 4.4.1.4) was chosen as a model enzyme for immobilization experiments. To allow for smooth fixation, the enzyme was immobilized indirectly by sugar-lectin binding. Monomolecular layers of the lectin concanavalin A and alliinase were applied by self-assembling processes. As an anchor for these layers, the sugar, mannan, was covalently coupled to the membrane surface. This procedure exhibits several advantages: (i) enzyme immobilization can be carried out under smooth conditions; (ii) immobilization needs little time; and (iii) protein layers may be renewed.

Absorption↗
PubMed2000

Self-complementary

Three [3]catenanes with cavities large enough to accommodate aromatic guests have been designed and synthesized (yields = 5-20 %) by means of kinetically controlled self-assembly processes. The X-ray structural analysis of one of three [3]catenanes confirmed the presence of a rectangular cavity (dimensions = 7 x 11 A) lined by pi-electron-rich recognition sites and hydrogen-bond acceptor groups. In spite of their apparently ideal recognition features, none of these [3]catenanes bind guests incorporating a pi-electron-deficient bipyridinium unit. However, the template-directed syntheses of the [3]catenanes also produce, in yields of 2-23%, [2]catenanes incorporating a 1,5-dioxynaphtho[38]crown-10 interlocked with a bipyridinium-based tetracationic cyclophane. The X-ray structural analyses of two of these [2]catenanes revealed that a combination of [pi...pi] and [C-H...pi] interactions is responsible for the formation of supramolecular homodimers in the solid state. 1H NMR spectroscopic investigations of the four [2]catenanes demonstrated that supramolecular homodimers are also formed (Ka= 17-31M(-1), T= 185 K) in (CD3)2CO solutions. Dynamic 1H NMR spectroscopy revealed that the 1,5-dioxynaphtho[38]crown-10 and tetracationic cyclophane components in the four [2]catenanes and in the three [3]catenanes circumrotate (deltaGc(not equal to) = 9-14 kcal mol(-1)) through each other's cavity in (CD3)2CO. Similarly, the 1,5-dioxynaphthalene and the bipyridinium ring systems rotate (deltaGc(not equal to) =10-14 kcal mol(-1)) about their [O...O] and [N...N] axes, respectively, in solution.

Journal Article↗
PubMed2000

How do they know? Influencing the relative stereochemistry of the complex units of dinuclear triple-stranded helicate-type complexes

Dinuclear triple-stranded helicates or meso-helicates are formed by self-assembly of linear ligand strands with appropriate metal ions. Very often this self-assembly proceeds with high diastereoselectivity leading either to the helicate or the meso-helicate. The stereoselectivity of the self-assembly process can be influenced by different factors such as the rigidity of the ligand (-->helicate), the number of methylene units in the alkyl spacers (even number of CH2 units --> helicate; odd number --> meso-helicate), template effects, or chiral substituents.

Journal Article↗