Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “additive”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38Linked to original sources
PubMed2005

Thermoregulatory response to an organophosphate and carbamate insecticide mixture: testing the assumption of dose-additivity.

Most toxicity data are based on studies using single compounds. This study assessed if there is an interaction between mixtures of the anticholinesterase insecticides chlorpyrifos (CHP) and carbaryl (CAR) using hypothermia and cholinesterase (ChE) inhibition as toxicological endpoints. Core temperature (T(c)) was continuously monitored by radiotelemetry in adult Long-Evans rats administered CHP at doses ranging from 0 to 50mg/kg and CAR doses of 0-150 mg/kg. The temperature index (TI), an integration of the change in T(c) over a 12h period, was quantified. Effects of mixtures of CHP and CAR in 2:1 and 1:1 ratios on the TI were examined and the data analyzed using a statistical model designed to assess significant departures from additivity for chemical mixtures. CHP and CAR elicited a marked hypothermia and dose-related decrease in the TI. The TI response to a 2:1 ratio of CHP:CAR was significantly less than that predicted by additivity. The TI response to a 1:1 ratio of CHP and CAR was not significantly different from the predicted additivity. Plasma and brain ChE activity were measured 4h after dosing with CHP, CAR, and mixtures in separate groups of rats. There was a dose-additive interaction for the inhibition of brain ChE for the 2:1 ratio, but an antagonistic effect for the 1:1 ratio. The 2:1 and 1:1 mixtures had an antagonistic interaction on plasma ChE. Overall, the departures from additivity for the physiological (i.e., temperature) and biochemical (i.e., ChE inhibition) endpoints for the 2:1 and 1:1 mixtures studies did not coincide as expected. An interaction between CHP and CAR appears to depend on the ratio of compounds in the mixture as well as the biological endpoint.

Administration, Oral↗
PubMed2004

Mixture additives inhibit the dermal permeation of the fatty acid, ricinoleic acid.

Ricinoleic acid (RA) like many of the ingredients in machine cutting fluids and other industrial formulations are potential dermal irritants, yet very little is known about its permeability in skin. 3H-ricinoleic acid mixtures were formulated with three commonly used cutting fluid additives; namely, triazine (TRI), linear alkylbenzene sulfonate (LAS), and triethanolamine (TEA) and topically applied to inert silastic membranes and porcine skin in vitro as aqueous mineral oil (MO) or polyethylene glycol (PEG) mixtures. These additives significantly decreased ricinoleic acid partitioning from the formulation into the stratum corneum (SC) in PEG-based mixtures. Except for LAS, all other additives produced a more basic formulation (pH = 9.3-10.3). In silastic membranes and porcine skin, individual additives or combination of additives significantly reduced ricinoleic permeability. This trend in ricinoleic acid disposition in both membranes suggests that the mixture interaction is more physicochemical in nature and probably not related to the chemical-induced changes in the biological membrane as may be assumed with topical exposures to potentially irritant formulations.

Alkanesulfonic Acids↗
PubMed2006

Influence of dairy manure addition on the biological and thermal kinetics of composting of greenhouse tomato plant residues.

A laboratory-scale bioreactor was used to investigate the influence of dairy manure addition (as an inoculum and a carbon source) on the biological and thermal kinetics of the composting process of tomato plant residues-wood shavings mixture. Urea was added (as a nitrogen source) to correct the initial C:N ratio to 30:1 and the initial moisture content was also adjusted to 60%. The result of this study indicated that manure addition to the tomato residues-wood shavings mixture is a good source of macro and micronutrients required for supporting the composting microorganisms. Manure addition increased the rate of temperature increase and the duration of maximum temperature and reduced the lag and the peak time, all of which resulted in a significant reduction in the retention time. However, thermophilic temperature (> or = 40 degrees Celsius) was only achieved with 30%, 40% and 50% manure addition for 3, 7 and 9h. Total carbon reductions were in the range of 9.4-10.8% and TKN reductions were in the range of 3.4-6.0%. Neither the nitrogen nor the moisture content were limiting factors as the C:N ratio remained in the range of 26:1 to 28:1 and the moisture content remained within the optimum range of 58-61%. The maximum temperature of each mixture correlated with the reduction of total carbon, but carbon availability was a limiting factor in these experiments. In order to attain and sustain a thermophilic phase during the composting process, the addition of a readily available carbon source to the tomato should be investigated and carbon type (carbohydrates, proteins and fats) should be taken into account.

Animals↗
PubMed2004

Effects of temperature and chemical addition on the formation of bromoorganic DBPs during ozonation.

The effects of temperature and addition of OH radical scavengers/enhancers or HOBr scavenger on the formation of bromoorganic disinfection byproducts (DBPs) from ozonation of six raw waters were studied in true batch reactors. The formation of bromoorganic DBPs during ozonation generally increased with the increase of temperature, but might also decrease for the waters with somewhat higher values of specific UV absorbance (SUVA). The addition of hydrogen peroxide, ethanol, or ammonium dramatically decreased the formation of bromoorganic DBPs; t-butanol addition significantly increased the formation of bromoorganic DBPs; bicarbonate addition might increase or decrease bromoorganic DBP formation depending on the water source. For all the waters treated with the chemical addition, the level of total organic bromine (TOBr) varied with the same pace as that of ozone exposure (CT), which suggests that TOBr formed during ozonation may be used to estimate the CT, a measure for the achieved degree of disinfection. The results demonstrate that for each water, the correlation between TOBr and CT was less affected by the change of chemical composition of the water than that between BrO(3)(-) and CT; for a given chemical composition and temperature of a water, there generally were well-defined relationships between TOBr and CT, and bromoform and CT just as that between BrO(3)(-) and CT. The possible mechanisms behind the linear functions of TOBr or BrO(3)(-) versus CT were given. Further study is needed to examine whether the trends found in this research can be applicable for the high SUVA waters.

Bicarbonates↗
PubMed2005

Additional salpingectomy after previous prophylactic oophorectomy in high-risk women: sense or nonsense?

OBJECTIVES: Since BRCA1/2 germ line mutation carriers are also at a higher risk of developing fallopian tube carcinoma, resection of the fallopian tubes is currently included at the time of risk reducing surgery. In this study, we comment on the need of additional bilateral prophylactic salpingectomy (BPS) following previous bilateral prophylactic oophorectomy (BPO) in women at high risk of ovarian cancer. METHODS: Retrospectively, the medical files of 42 high-risk women, who had undergone BPO only, were reviewed. RESULTS: In our center, risk-reducing surgery consisted of BPO only for 42 women. Twenty-seven women received an informative letter in which counseling for additional BPS was offered. In total, 15 women opted for additional BPS. Surgery was performed with a mean interval of 65 months (range 6-101) in 10 BRCA1 carriers, one BRCA2 carrier, one BRCA1 and 2 carrier, and three women with non-informative test results. The procedure was readily done by laparoscopy in 13 women and two needed a laparotomy. No post-operative complications had occurred. Histopathological examination revealed no malignancy. CONCLUSIONS: We believe that additional risk reduction of cancer necessitates BPS in BRCA1/2 carriers after previous BPO. BPS after previous BPO was easily performed. Today, physicians should include resection of the fallopian tube at prophylactic surgery in high-risk women and should consider additional BPS in women who have undergone BPO only.

Adult↗
PubMed2001

The additive in vitro anti-HIV-1 effect of chloroquine, when combined with zidovudine and hydroxyurea.

The 4-aminoquinoline chloroquine and its analogue hydroxychloroquine are endowed with anti-HIV-1 activity both in vitro and in vivo. We previously reported that the addition of CQ (chloroquine) to the combination of HU (hydroxyurea) and ddI (didanosine) provides additive anti-HIV-1 activity. We here extended this in vitro investigation by studying whether the addition of CQ also resulted in additive anti-HIV-1 activity when combined with HU plus AZT (zidovudine). The same effect was found, whether CQ was added to HU plus AZT or to HU plus ddI, in recently infected H-9 and U-937 cells or primary T cells and monocytes, as well as in immunologically or oxidatively stimulated ACH-2 and U-1 cells. At concentrations where CQ exerts its anti-HIV-1 effect in combination with the other drugs, CQ addition does not result in either cell toxicity or apoptosis.

Anti-HIV Agents↗
PubMed2002

Memory effect of mobile phase additives in chiral separations on a Chiralpak AD column.

Using chiral probes shown to be sensitive to the presence of mobile phase additives, a memory effect for these additives by an amylosic column was demonstrated. Exposure to these additives gave prolonged chromatographic performance changes even after their removal from the mobile phase. This finding is consistent with strong binding of the additives to the stationary phase. A procedure to remove bound additives was developed.

Chromatography, Liquid↗
PubMed1999

Comparison of methods for quantitative analysis of additives in low-density polyethylene using supercritical fluid and enhanced solvent extraction.

On-line supercritical fluid extraction-supercritical fluid chromatography (SFE-SFC) with cryogenic trapping was used to extract and separate five additives from a low-density polyethylene (LDPE) sample. A glass tube filled with glass wool afforded excellent collection efficiency for the extracted analytes. Additive spiked sand was employed to optimize the various parameters of the on-line SFE-SFC system. Calibration curves from the spiked sand studies for on-line SFE-SFC were obtained with good linearities for quantitation. Results obtained on additives in LDPE from on-line SFE-SFC were comparable to those from off-line SFE-HPLC and off-line enhanced solvent extraction (ESE)-HPLC for all additives except Irganox 1076. However, the precision obtained with on-line SFE-SFC was lower than that from off-line SFE-HPLC and off-line ESE-HPLC due to the small sample size employed in the on-line system. Considerable clean-up of the ESE extract was required prior to chromatographic analysis. On-line SFE-SFC minimized the sample handling and eliminated the use of organic solvent. Despite the lower than expected precision, the on-line SFE-SFC method for quantitation of polymer additives appears to be reliable and robust for application in routine quality control analysis.

Chromatography, High Pressure Liquid↗
PubMed1998

In vitro study of the number of surface defects in monophase and two-phase addition silicone impressions.

STATEMENT OF PROBLEM: Monophase addition-cured silicone impression materials in stock trays are considered to be alternatives to two-phase systems used with custom trays. PURPOSE: This study compared the number of surface defects in addition-cured silicone impressions recorded with monophase materials in stock trays and two-phase impressions in custom trays. METHODS: The number of voids visible on the surface of impressions recorded in vitro were counted. Two monophase impression materials. (President Monobody system 75, Bayer Cutter) in stock trays were compared with impressions recorded with two-phase addition silicone materials (President Plus light-body/regular-body and Zhermack Elite light-body/medium-body) in custom trays. A total of 200 automixed impressions, 50 with each material, were recorded of 50 dentoform molar teeth prepared for full veneer crowns. Impressions were examined for surface voids anywhere on the prepared part of the tooth by a trained examiner. RESULTS: Mean number of voids observed for the monophase impressions were 3.0 +/- 2.2 for President Monobody system and 3.4 +/- 2.0 for Bayer Cutter system. Mean number of voids for the two-phase materials were 0.8 +/- 1.0 for President Plus, and 1.0 +/- 1.1 for Zhermack Elite. No significant differences were observed for number of voids between the monophase materials or between the two-phase systems (ANOVA and Neuman-Keuls p > 0.05). However, both two-phase materials in custom trays had significantly fewer surface voids than the two-monophase materials (ANOVA and Neuman-Keuls, p < 0.001) used in stock trays. CONCLUSION: Monophase addition-cured impression materials in stock trays carries an increased risk of void formation on the surface of the impression when compared with two-phase addition silicone materials in custom trays.

Analysis of Variance↗
PubMed2002

Increase of nitrous oxide flux to the atmosphere upon nitrogen addition to red mangroves sediments.

Response of nitrous oxide N20 sediment/air flux to nitrogen addition was assessed in mangrove (Rhizophora mangle) sediments. Fluxes were enhanced with both ammonium and nitrate loading. Greatest fluxes (52 micromol m(-2) h(-1)) were obtained with ammonium addition and saturation was achieved with additions of 0.9 mol m(-2). Maximum flux following ammonium addition was 2785 times greater than control plots and 4.5 times greater during low tide than with equivalent ammonium addition at high tide. Nitrate enrichment resulted in exponential growth, with maximal mean flux of 36.7 micromolm(-2) h(-1) at 1.9 molm(-2); saturation was not achieved. Differential response to ammonium and nitrate, and to tide and elevation, indicate that microbial nitrification is responsible for most of the observed gas flux. Mangrove sediments constitute an important source of global atmospheric N20 and increases in nitrogen loading will lead to significant increases in the flux of this atmospherically active gas.

Air Pollutants↗
PubMed2001

Nutrient addition to enhance biological treatment of greywater.

This study compares the chemical oxygen demand (COD) removal and respiration rates of a microbial population treating real and synthetic greywaters dosed with nutrient supplements. The nutrient composition of the real and synthetic greywaters was analysed and the dosing regime for nitrogen, phosphorus and a range of trace metals planned accordingly. The doses consisted of eight single additives (macronutrients and trace metals) to the control greywater and six trace metal additions to C: N : P balanced greywater. The COD removal for the control real and synthetic greywater in lab-scale activated sludge systems (0.038 and 0.286 kg COD kg MLSS(-1) d(-1), respectively) confirmed nutrient limitation and the poor degree of greywater treatment. Nutrient dosing increased the COD removal rate and oxygen uptake rate in many cases. The greatest stimulation of microbial activity was observed with zinc additions to C: N: P balanced real greywater (1.291 kg COD kg MLSS(-1) d(-1) over 30 times the control). Inhibitory effects to various extents were rare and limited mainly to the additions of metals to synthetic greywater. The dominance of chemicals effects was observed on addition of some micronutrients; notably iron and aluminium, metals on which many coagulants for use in biotreatment of other wastewaters are based. The data indicate that the impact of understanding microbial processes and the nutrients required for wastewater treatment can only serve to optimise process efficiency for the proposed treatment of greywater.

Carbon↗
PubMedDate not supplied

PCDD/F inhibition by prior addition of urea to the solid fuel in laboratory experiments and results statistical evaluation.

The objectives of this work were to study the effect of urea addition to the fuel before the combustion on the suppression of PCDD/F emissions, to examine the influence of urea to PCDD/F isomer patterns by employing statistical analysis techniques and to determine the most effective method of urea addition. Urea in the form of powder and as an aqueous solution was mixed with RDF and the fuel mixtures were incinerated in a lab-scale reactor at 1000 degrees C. PCDD/F emitted during combustion experiments were collected in a quartz wool filter downstream the reactor unit. Analysis and quantification of PCDD/F showed that urea significantly affected PCDD/F emissions. Combustion of RDF containing 10% w/w urea resulted in PCDD/F emissions lower than 8 I-TEQ ng/g RDF, while the corresponding average value from single RDF combustion was 17 I-TEQ ng/g RDF. The PCDD/F prevention capacity of urea was independent from the method of urea addition to the fuel, as similar results were obtained after the addition of urea in the solid and in the aqueous phases. Results assessment by statistical methods showed that isomer patterns remained almost stable and were not affected by the method of urea addition.

Journal Article↗
PubMed1998

Effect of the gasoline additives on PAH emission.

PAH emission from the powered engines fueled by a 95 leadfree gasoline (95-LFG), a 92 leadfree gasoline (92-LFG) and a Premium leaded gasoline (PLG) with two gasoline additives (SA and SB) were collected using a PAH sampling system with a particulate interception device. Twenty one PAHs were analyzed primarily by an GC/MS, while eight metal elements were determined mainly by an ICP-AES. This investigation showed that the gasoline additives contain more amounts of carcinogenic PAHs than gasolines do. Blending these additives do raise the PAH content in the gasolines, simultaneously, will emit more amount of PAHs from the tailpipe of engine exhaust. It is suggested that before a gasoline additive is commercialized, an assessment on its PAH emission should be evaluated to make sure that the additive will not emit more PAHs and cause adverse effect on public health.

Carcinogens↗
PubMed1999

Bronchoconstrictor additives in bronchodilator solutions.

Nebulized bronchodilator solutions are available in the United States as both nonsterile and sterile-filled products. Sulfites, benzalkonium chloride (BAC), or chlorobutanol are added to nonsterile products to prevent bacterial growth, but there have been reports of contaminated solutions containing preservatives. Ethylenediamine tetraacetic acid (EDTA) is added to some products to prevent discoloration of the solution. With the exception of chlorobutanol, all of these additives are capable of inducing bronchospasm in a concentration-dependent manner. However, it is rarely apparent to the patient or health care provider that the additive diminishes the bronchodilator effects. Older products (eg, isoproterenol and isoetharine) contain enough sulfites to produce bronchospasm in most patients with asthma, even in those without a prior history of sulfite sensitivity. Bronchoconstriction from inhaled BAC is cumulative, prolonged, and correlates directly with basal airway responsiveness. The multidose dropper bottle of albuterol contains 50 microg BAC/dose, which is below the threshold for bronchoconstriction whereas the screwcap unit-dose vial contains 300 microg/dose, which is above the threshold for many patients. If the screwcap product is used in the emergency department, a patient could receive as much as 1800 microg of BAC in the first hour. Three sterile-filled unit dose albuterol products contain no additives, whereas a fourth, (manufactured by Dey Laboratories) contains 300 microg of EDTA, which is also below the threshold dose for bronchoconstriction. Only additive-free sterile solutions should be used for hourly or continuous nebulization of albuterol. The multidose dropper bottle or the Dey product can be used when the interval between doses is longer, whereas the screwcap product should not be used for acute therapy. Ipratropium is available only as a sterile, additive-free unit-dose vial, as is levalbuterol.

Administration, Inhalation↗
PubMed2003

Dose-addition of individual odorants in the odor detection of binary mixtures.

In a series of experiments, we have explored the rules of olfactory detection agonism between the odorants butyl acetate and toluene. First, we obtained the concentration-detection function for the odor of the individual compounds. Second, we selected the concentrations of the two substances producing three levels of detectability (low, medium, and high) and, for each level, tested the comparative detectability of the two single chemicals and three mixtures of varying proportions. In each case, the mixtures were prepared in such a way that, if a rule of complete dose addition were to hold, all five stimuli (two single, three mixtures) should be equally detected. The outcome revealed complete dose addition at relatively low detectability levels but fell short of dose addition at medium and high levels. A recent analogous study on trigeminal chemosensory detection via nasal pungency and eye irritation of these same stimuli have shown a similar trend but showed a less dramatic loss of dose additivity with increased detectability. These results on detection of mixtures suggest a more selective window of chemical tuning (i.e. less dose addition) in olfaction than in trigeminal chemoreception.

Acetates↗
PubMed2003

Addition of Novobiocin in pre-enrichment step can improve Salmonella culture protocol of modified semisolid Rappaport-Vassiliadis.

The aim was to investigate the effect of addition of Novobiocin to the non-selective buffered peptone water (BPW) for pre-enrichment of Salmonella in connection with plating on modified semisolid Rappaport-Vassiliadis (MSRV). In a semi-quantitative study, the level of Salmonella following pre-enrichment of 32 presumably naturally contaminated swine fecal samples were assessed for BPW with and without addition of Novobiocin (22 microg/ml). In another experiment, a total of 400 swine fecal samples were screened for the presence of Salmonella spp., in order to compare the performance of the non-selective pre-enrichment broth with BPW made semi-selective by addition of Novobiocin. The semi-quantitative assessment of the Salmonella level showed that addition of Novobiocin in the pre-enrichment step on average increased the level of Salmonella 1.2 log dilution steps. When growth was scored at five levels, 90 samples opposed to 50 yielded a strong positive reading (+++) when Novobiocin was applied. Growth was on average 0.3 scores higher when pre-enriched with Novobiocin. The difference in growth score medians of the two methods was highly significant (Sign test; p<0.001). Despite the increased sensitivity, 13 culture-positive samples were missed when using the Novobiocin-containing BPW. In conclusion, a simple addition of Novobiocin in the BPW pre-enrichment step of fecal samples may facilitate reading and thereby detection of Salmonella on MSRV. The increase of Salmonella in the semi-quantitative study may be caused by a reduction in the number of competitive microorganisms.

Animals↗
PubMed2001

Effects of sodium lactate and other additives in a cooked ham product on sensory quality and development of a strain of Lactobacillus curvatus and Listeria monocytogenes.

Cooked cured ham products were produced according to a standard recipe for cooked ham with various levels of sodium lactate, sodium diacetate or buffered sodium citrate. They were compared with a reference ham product with respect to sensory quality and growth of Lactobacillus curvatus and Listeria monocytogenes. For this, a part of the products was sensory analysed directly after preparation. Another part of the cooked ham products was minced and homogeneously inoculated with L. curvatus (10(4)/g) and L. monocytogenes (10(2)/g) and filled in 60-g plastic pouches. After vacuum packaging, the pouches were stored at 4 degrees C for up to 40 days. Between the different ham compositions, only minor differences were found for appearance, internal colour, structure and firmness. The addition of 0.2% Na-diacetate had a negative effect on the odour and taste of the ham product. The addition of 2.5% to 3.3% Na-lactate inhibited the growth of L. curvatus compared to the reference, while 0.1% and 0.2% Na-diacetate did not. L. monocytogenes was best inhibited by the addition of Na-lactate but also by the addition of 0.2% Na-diacetate. On the other hand, the growth of L. monocytogenes was stimulated by the addition of 1% buffered Na-citrate.

Animals↗
PubMed1990

Rapid infusion of additive red blood cells: alternative techniques for massive hemorrhage.

Additive red blood cells (RBCs) have replaced packed RBCs for treatment of massive hemorrhage in many medical centers. Modifications in transfusion apparatus and RBC viscosity were tested for their ability to provide rapid flow of additive RBCs. Infusions through standard transfusion tubing and three types of large-bore transfusion tubing were compared using three large-bore catheters, two infusion pressures, and additive RBCs of three different viscosities. More than 13 minutes were required to infuse 1 unit 4 C RBCs using current accepted practice (16-gauge catheter, standard tubing, gravity flow). The most rapid technique resulted in an infusion time of 20 +/- 1 seconds for 22 C blood. The addition of pressure infusion, large-bore tubing, or an 8F catheter to a transfusion system reduced infusion times up to 74%, 82%, and 85%, respectively. The combination of all three techniques resulted in a maximum improvement of 96%. Saline predilution and warming did not consistently provide clinically important differences in infusion time but may be important for avoidance of hypothermia. Spectrophotometric measurement of free hemoglobin demonstrated no clinically significant hemolysis secondary to rapid infusion. Clinical management should address potential hypocalcemia and coagulopathy. We conclude that large-bore tubing, pressure infusion, and an 8F catheter can provide important decreases in infusion time of additive RBCs without evidence of significant hemolysis.

Blood Transfusion↗