Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Silicates”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 685 records · Page 38Linked to original sources
PubMed2002

Self-assembly of synthetic zinc chlorins in a silicate micelle prepared by sol-gel process.

Zinc methyl 3-devinyl-3-hydroxymethyl-pyropheophorbide-a (1), a good model compound of light-harvesting pigments of green photosynthetic bacteria, formed self-aggregates in the presence of octadecyltriethoxysilane and tetraethoxysilane in an aqueous solution to exhibit visible absorption spectra similar to the natural antenna. Base-catalyzed cross-linked polymerization of the additive Si-ORs (R=ethyl and H) afforded the formation of a siloxane network (Si-O-Si) on the surface of the self-assemblies of 1. The resulting microcapsules were stable to tolerate the deaggregation to monomeric 1 by addition of surfactant Triton X-100 more largely than the corresponding micelles before polymerization.

Micelles↗
PubMed2000

Temperature dependent luminescence characteristics of Sm3+-doped silicate glass.

We report here on the optical characterisation of Sm3+ (5 wt%): SiO2 + Al2O3 + Li2O + Na2O + MgO glass from the measurements of optical absorption spectra (at 300 K), total luminescence spectra (10-300 K) and fluorescence lifetimes (10-300 K) of the prominent emission transitions of the Sm3+ ions. Besides its spectral properties, physical and nonlinearity characterising property parameters have also been computed to understand the optical dispersive power of this glass. By the application of Judd-Ofelt parameters (omega(lambda)) of the measured absorption spectrum, the radiative transition probability factors (A) and stimulated emission cross-section (sigma(p)E) of the observed fluorescent levels have been analysed. Both emission intensity and measured lifetimes of the prominent luminescent transition (4G(5/2) --> 6H(7/2)) concerning Sm3+-glass has been showing a descending trend with the rise in temperature with N2-laser (337.1 nm) as the source of excitation.

Glass↗
PubMedDate not supplied

Encapsulation of myoglobin with a mesoporous silicate results in new capabilities.

A metmyoglobin (Fe3+), an oxidized form of myoglobin (Fe2+), was confined in nanospaces of about 4 nm in diameter in mesoporous silica (FSM; folded-sheet mesoporous material), forming a metmyoglobin (Fe3+)-FSM nanoconjugate. The spectral characteristics of metmyoglobin (Fe3+)- and myoglobin (Fe2+)-FSM show an absorption curve quite similar to that of native metmyoglobin, indicating that myoglobin retains its higher-order structure in the pores of FSM. The metmyoglobin (Fe3+)-FSM conjugate had not only a peroxidase-like activity in the presence of hydrogen peroxide (a hydrogen acceptor) and 2,2-azino-bis(3-ethylbenzothiazoline)-6-sulfomic acid (ABTS) or guaiacol (a hydrogen donor) but also an advanced molecular recognition ability enabling it to distinguish between ABTS and guaiacol. Furthermore, the metmyoglobin (Fe3+)-FSM showed the peroxidase-like activity even in an organic media using benzoyl peroxide as the hydrogen acceptor and leucocrystal violet as the hydrogen donor. The simple immobilization of metmyoglobin (Fe3+) into FSM results in enhanced catalytic activity in organic media compared to that of native metmyoglobin (Fe3+).

Adsorption↗
PubMed2004

Phosphate adsorption on aluminum-impregnated mesoporous silicates: surface structure and behavior of adsorbents.

Phosphorus from excess fertilizers and detergents ends up washing into lakes, creeks, and rivers. This overabundance of phosphorus causes excessive aquatic plant and algae growth and depletes the dissolved oxygen supply in the water. In this study, aluminum-impregnated mesoporous adsorbents were tested for their ability to remove phosphate from water. The surface structure of the materials was investigated with X-ray diffraction (XRD), a N2 adsorption-desorption technique, Fourier transform-infrared (FT-IR), and X-ray photoelectron spectroscopy (XPS) to understand the effect of surface properties on the adsorption behavior of phosphate. The mesoporous materials were loaded with Al components by reaction with surface silanol groups. In the adsorption test, the Al-impregnated mesoporous materials showed fast adsorption kinetics as well as high adsorption capacities, compared with activated alumina. The uniform mesopores of the Al-impregnated mesoporous materials caused the diffusion rate in the adsorption process to increase, which in turn caused the fast adsorption kinetics. High phosphate adsorption capacities of the Al-impregnated mesoporous materials were attributed to not only the increase of surface hydroxyl density on Al oxide due to well-dispersed impregnation of Al components but also the decrease in stoichiometry of surface hydroxyl ions to phosphate by the formation of monodentate surface complexes.

Adsorption↗
PubMed2004

Arsenic removal with iron(II) and iron(III) in waters with high silicate and phosphate concentrations.

Arsenic removal by passive treatment, in which naturally present Fe(II) is oxidized by aeration and the forming iron(III) (hydr)oxides precipitate with adsorbed arsenic, is the simplest conceivable water treatment option. However, competing anions and low iron concentrations often require additional iron. Application of Fe(II) instead of the usually applied Fe(III) is shown to be advantageous, as oxidation of Fe(II) by dissolved oxygen causes partial oxidation of As(III) and iron(III) (hydr)oxides formed from Fe(II) have higher sorption capacities. In simulated groundwater (8.2 mM HCO3(-), 2.5 mM Ca2+, 1.6 mM Mg2+, 30 mg/L Si, 3 mg/L P, 500 ppb As(III), or As(V), pH 7.0 +/- 0.1), addition of Fe(II) clearly leads to better As removal than Fe(III). Multiple additions of Fe(II) further improved the removal of As(II). A competitive coprecipitation model that considers As(III) oxidation explains the observed results and allows the estimation of arsenic removal under different conditions. Lowering 500 microg/L As(III) to below 50 microg/L As(tot) in filtered water required > 80 mg/L Fe(III), 50-55 mg/L Fe(II) in one single addition, and 20-25 mg/L in multiple additions. With As(V), 10-12 mg/L Fe(II) and 15-18 mg/L Fe(III) was required. In the absence of Si and P, removal efficiencies for Fe(II) and Fe(III) were similar: 30-40 mg/L was required for As(II), and 2.0-2.5 mg/L was required for As(V). In a field study with 22 tubewells in Bangladesh, passive treatment efficiently removed phosphate, but iron contents were generally too low for efficient arsenic removal.

Arsenic↗
PubMed2004

XAS study of mercury(II) ions trapped in mercaptan-functionalized mesostructured silicate with a wormhole framework structure.

Directly assembled wormhole mesostructures with high level functionalized mercaptan (MP-HMS) have been shown to be effective mercury(II) (Hg2+) trapping agents. Sorption of Hg2+ onto MP-HMS was investigated using X-ray absorption spectroscopy (XAS) to identify the structural coordination of the adsorbed Hg. Samples with different fractions of mercaptan functionalized groups (i.e., x = 0.1 and 0.5) with various Hg/S molar ratios ranging from 0.05 to 1.4 were investigated. XAS analysis indicates that adsorbed Hg first coordination shell is best fitted with an Hg-O path and an Hg-S path. The Hg-S atomic distance (R(Hg-S)) remained relatively constant while the Hg-S coordination numbers (CN) decreased as Hg/S loading increased. For the Hg-O path, both the CN and the R(Hg-O) increased with increasing Hg loading. XAS results suggest that at low Hg loadings, adsorbed Hg2+ forms mostly monodentate sulfur complexes (-S-Hg-OH) with the sulfur functional groups on the MP-HMS surfaces. At high Hg loadings, the Hg coordination environment is consistent with the formation of a double-layer structure of Hg attached to sulfur binding sites (-S-Hg-O-Hg-OH).

Adsorption↗
PubMed2003

Functional nanocomposites prepared by self-assembly and polymerization of diacetylene surfactants and silicic acid.

Conjugated polymer/silica nanocomposites with hexagonal, cubic, or lamellar mesoscopic order were synthesized by self-assembly using polymerizable amphiphilic diacetylene molecules as both structure-directing agents and monomers. The self-assembly procedure is rapid and incorporates the organic monomers uniformly within a highly ordered, inorganic environment. By tailoring the size of the oligo(ethylene glycol) headgroup of the diacetylene-containing surfactant, we varied the resulting self-assembled mesophases of the composite material. The nanostructured inorganic host altered the diacetylene polymerization behavior, and the resulting nanocomposites show unique thermo-, mechano-, and solvatochromic properties. Polymerization of the incorporated surfactants resulted in polydiacetylene (PDA)/silica nanocomposites that were optically transparent and mechanically robust. Molecular modeling and quantum calculations and (13)C spin-lattice relaxation times (T(1)) of the PDA/silica nanocomposites indicated that the surfactant monomers can be uniformly organized into precise spatial arrangements prior to polymerization. Nanoindentation and gas transport experiments showed that these nanocomposite films have increased hardness and reduced permeability as compared to pure PDA. Our work demonstrates polymerizable surfactant/silica self-assembly to be an efficient, general approach to the formation of nanostructured conjugated polymers. The nanostructured inorganic framework serves to protect, stabilize, and orient the polymer, mediate its performance, and provide sufficient mechanical and chemical stability to enable integration of conjugated polymers into devices and microsystems.

Acetylene↗
PubMed2004

Protein encapsulation in mesoporous silicate: the effects of confinement on protein stability, hydration, and volumetric properties.

On the basis of the predictions of statistical-thermodynamic models, it is postulated that excluded volume effects may play a significant role in the stability, interaction, and function of proteins. We studied the effects of confinement on protein un/refolding and stability. Our approach was to encapsulate a model protein, RNase A, in a mesoporous silica, MCM-48, with glasslike wall structure and with well-defined pores to create a crowded microenvironment. To the best of our knowledge, this is the first report where pressure perturbation and differential scanning calorimetric techniques are employed to evaluate the stability, hydration, and volumetric properties of the confined protein. A drastic increase in protein stability ( approximately 30 degrees C increase in unfolding temperature) is observed. The increase in stability is probably not only due to a restriction in conformational space (excluded volume effect due to nonspecific interactions) but also due to an increased strength of hydration of the protein within the narrow silica pores.

Calorimetry, Differential Scanning↗
PubMed2004

Humidity and temperature effects on CTAB-templated mesophase silicate films at the air-liquid interface.

Off-specular X-ray reflectivity measurements were carried out to follow the in situ development of surfactant-templated silica thin films at the air-water interface under conditions of controlled relative humidity and temperature, using an enclosed sample cell designed for this purpose. The results suggest a strong dependence of formation time and growth mechanism on ambient conditions. Thin films were synthesized at the air-water interface using cetyltrimethylammonium bromide (CTAB, 0.075 M) and a silica precursor, tetramethoxysilane (TMOS, 0.29-0.80 M) in an acidic medium. The studied humidity range was from 50 to 100%, the temperature was between 25 and 40 degrees C, and the TMOS/CTAB molar ratio was between 3.3 and 10.7. We observed that high humidity slows down the growth process due to lack of evaporation. However, increasing the temperature results in a decrease in the film-formation time. We proposed a formation mechanism for film growth as a consequence of phase separation, organic array assembly, and silica polymerization.

Air↗