Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Cellulose”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 667 records · Page 37Linked to original sources

The effect of media changes on the rate of cellulose solubilisation by rumen and digester derived microbial communities.

The aim of this study was to investigate the effect of rumen fluid and leachate-based media on the ability of rumen and anaerobic digester derived microorganisms to degrade cellulose. The results demonstrated that rumen microorganisms are not capable of solubilising cellulose, or generating biomass, at an optimal rate when grown in leachate-based media when compared to the rates achieved when grown in rumen-based media. In contrast, the rate of biomass generation and cellulose solubilisation by digester microorganisms was not strongly affected by a change in media type. Several authors have theorised that cellulose degradation rates in anaerobic digesters can be increased by inoculation with rumen-derived microorganisms. The results from this study show that this approach is unlikely to be successful, because the rumen microorganisms would likely be unable to solubilise and out-compete native solid waste microorganisms for the cellulose in a foreign (leachate based) medium.

Animals↗

Effect of fiber orientation in dynamic FTIR study on native cellulose.

The properties of cellulose materials are highly dependent on the interactions between and within the cellulose chains mainly related to inter- and intramolecular hydrogen bonds. To investigate the deformation behavior of cellulose and its relation to molecular straining, cellulose sheets with different fiber orientations were studied by dynamic FTIR spectroscopy. The sheets were stretched sinusoidally at low strains while being irradiated with polarized infrared light. It is shown that the polarization direction determines the dynamic IR response to a higher extent than the fiber direction in the sample sheets. Different polarization modes give different dynamic signals, allowing conclusions to be drawn on the structural orientation of submolecular groups in the cellulose molecules. The bands in the spectra mainly affected by the deformation of the sheets were derived from skeletal vibrations that include the C-O-C bridge connecting adjacent rings and from the hydrogen bonds. The conclusion that these groups are the ones that are mainly deformed under load has thereby experimentally demonstrated the theoretical calculations from Tashiro and Kobayashi [Tashiro, K.; Kobayashi, M. Polymer 1991, 32, 1516-1526].

Cellulose↗

Effects of cellulase on the modification of cellulose.

Multicomponent cellulases, purified endoglucanases and cellobiohydrolases were assayed and shown to modify pure natural cellulose (softwood pulp). Changes in structure and properties of the cellulose caused by enzymatic treatment depend on the composition, the type of enzyme, and the treatment conditions. The reactivity of cellulose for some dissolving and derivatization processes may be improved by enzymatic hydrolysis. Endoglucanases decreased the average degrees of polymerization (DP) and improved the alkaline solubility of cellulose most efficiently. The variation in the supramolecular structure estimated from the infrared spectra of the cellulose samples was found to be correlated with the reactivity and might represent wide variations in conformation caused by the breakdown of the hydrogen bonds.

Carboxymethylcellulose Sodium↗

Interconversion of the Ialpha and Ibeta crystalline forms of cellulose by bending.

Bending cellulose in a plane normal to the hydrogen-bonded sheets of chains causes a longitudinal displacement of the sheets with respect to one another. The magnitude of this displacement is shown to be sufficient to interconvert the Ialpha and Ibeta forms of cellulose within a bending angle of 39 degrees when the curvature of the sheets of chains comprising the microfibril is modelled as a series of concentric circular arcs. Bending through an angle of 90 degrees is more than sufficient to convert the Ialpha form into Ibeta and back again. Cellulose microfibrils emerging from the cellulose synthase complex in the plasma membrane must bend sharply before they can lie parallel with the inner face of the cell wall. The scale of the changes induced by bending is sufficient to ensure that whatever crystal form would be expected from the geometry of the biosynthetic complex, it is likely be radically altered before the cellulose is incorporated into the cell wall.

Cellulose↗

Laparoscopic oxidized cellulose (Surgicel) application for small uterine perforations.

OBJECTIVES: To test the efficacy and safety of laparoscopic oxidized cellulose application at the uterine perforation site. METHODS: In a prospective study over a 3.5-year period a total of 30 women undergoing combined surgical termination of pregnancy and laparoscopic sterilization who had a small uterine perforation were recruited. Oxidized cellulose (Surgicel) was inserted and attached to the perforation site with a laparoscope. The end point was sealing of the perforation and complete hemostasis. Laparotomy was performed if hemostasis was not achieved. RESULTS: The mean age, parity and gestation were 31.4 years, 3.8 and 9.3 weeks. The perforations occurred in the fundal region (60%), anterior wall (16.7%), posterior wall (13.3%), upper lateral wall (3.3%) and lower lateral wall (6.7%). Mean size of perforations, respectively according to site were 4.3 mm, 3.2 mm, 3.4 mm, 3 mm and 3.5 mm in the five groups. Laparoscopic oxidized cellulose application was successful in all women with fundal, anterior, posterior and upper lateral uterine wall perforations. In two women with perforations on the lower lateral wall, due to excessive blood loss, oxidized cellulose fell off; laparotomy was performed and hemostasis was achieved with sutures. All 28 laparoscopically-treated women were discharged on the next day in good condition with no complications. CONCLUSIONS: Laparoscopic oxidized cellulose application appears to be a safe and effective treatment for small uterine perforations that are bleeding moderately.

Adult↗

Improvement of the efficiency of ion-exchange cellulose columns and their application.

Packing procedures and operating conditions for microparticulate ion-exchange cellulose columns were investigated. The efficiencies of ion-exchange cellulose and mixed-bed ion-exchange cellulose columns were compared. The mixed-bed columns contained ion-exchange cellulose and diatomite, and those with a 5:1 volume ratio of ion-exchange cellulose (average particle size 7 micronm) and diatomite were found to be superior in almost every respect. Medical, pharmaceutical, biochemical and environmental applications of this type of column are shown.

Cellulose↗

Direct fractionation of proteins in particle-containing feedstocks by a filter paper pieces-based DEAE-cellulose column chromatography. Rapid, robust and low-cost capturing procedure for protein.

Filter paper pieces-based (FPB) DEAE-celluloses was prepared for direct fractionation of proteins in particle-containing feedstocks. FPB DEAE-cellulose has a protein binding capacity equivalent to that of commercially available DEAE-cellulose. Crude extracts from porcine intestine and kiwi fruit pulp, which were unmanageable by commercially available chromatographic media due to rapid clothing, could be directly fractionated with FPB DEAE-cellulose column. In addition, effluents from an FPB DEAE-cellulose column were extensively clarified. The present approach can be used as a rapid, robust and low-cost capturing step for protein from particle-containing feedstocks.

Animals↗

Quantitative analysis for the cellulose I alpha crystalline phase in developing wood cell walls.

FT-IR and X-ray analyses were employed to determine the relative ratio of cellulose Ialpha and Ibeta crystalline phases present in each developmental stage of coniferous tracheid cell wall formation. The IR spectra showed that initially the Ialpha phase occupies 50% of the crystalline regions in the primary cell wall cellulose and this value drops to 20% after ceasing of the cell enlarging growth for the formation of the secondary wall cellulose (the remaining regions are composed of the Ibeta phase). Although it is reasonable that the content for Ibeta, which is stress-reduced crystalline form, was higher in the secondary wall formation (Kataoka Y, and Kondo T. Macromolecules 1996;29:6356 6358) it is more interesting that during the crystallization of stress-induced Ialpha cellulose for the primary wall the stress-reduced Ibeta, is also possible to be crystallized in an alternative way. This means that throughout the period the Ialpha-causing stress may not be necessarily kept loaded. In light of our previously reported hypothesis (Kataoka Y. and Kondo T. Macromolecules 1998;31:760-764) for the formation of Ialpha phase due to cellular growing stresses in the primary wall cellulose, such an alternating on-off stress effect to account for the occurrence of both Ialpha and Ibeta phases might be related to a biological growth system in coniferous wood cells.

Cell Division↗

Is cellulose sponge degradable or stable as implantation material? An in vivo subcutaneous study in the rat.

The long-term behaviour of cellulose sponge implants, 10 x 10 x 5 mm in size, and tissue reactions in and around them were examined in the subcutaneous tissue of the rat from 1 to 60 weeks after implantation. The cellulose sponge used was filled up with connective tissue 4 to 8 weeks after implantation. Histologically, moderate foreign body tissue reaction inside the implant, the appearance of cracks and fissures, spotty colouration, and softening of the pore walls were observed up to 16 weeks after implantation. Later, the foreign body reaction inside the sponge became milder, the spotty colouration disappeared and micropores enlarged in the viscose cellulose matrix. Histomorphometrically, the cross-sectional area of the implants and the size of the pore wall fragments decreased, and the number of pore wall fragments increased significantly. The cellulose sponge used can be regarded as a slowly degradable implantation material. However, the time needed for the total disappearance of the cellulose sponge from subcutaneous tissue is longer than the 60 weeks.

Absorbable Implants↗

Function and mechanism of a low-molecular-weight peptide produced by Gloeophyllum trabeum in biodegradation of cellulose.

A special low-molecular-weight peptide named Gt factor, was isolated and purified via HPLC from the culture extract of the brown-rot fungus Gloeophyllum trabeum. It had high-affinity Fe(3+)-chelating ability and could reduce Fe(3+) to Fe(2+). In the presence of O(2), it could produce hydroxyl radicals HO*. The effects of Gt factor on cellulose degradation suggested that Gt factor could disrupt inter- and intra- hydrogen bonds in cellulose chains by a HO*-involved mechanism. This resulted in depolymerization of cellulose chains, which produced more reducing and non-reducing ends, thus making cellulose accessible for further degradation. This pathway was quite different from the hydrolytic processes driven by cellulases, and Gt factor might play an important role in the early stage of cellulose depolymerization by brown-rot fungi.

Basidiomycota↗

The effects of hemodialysis on platelet activation with new and reprocessed regenerated cellulose dialyzers.

Biocompatibility of dialysis membranes is defined, in part, by the tendency to activate the coagulation system. Methods for evaluating stimulation of the coagulation include analyses of markers of platelet activation. The purpose of these studies was to ascertain the effects of high blood flow rates and reprocessing on platelet activation during routine hemodialysis with regenerated cellulose membranes. The platelet alpha-granule protein, beta-thromboglobulin (BTG), was measured in patients undergoing routine chronic hemodialysis with regenerated cellulose dialyzers. Initial studies showed BTG levels to increase from 24 +/- 2 IU/mL at the baseline to 30 +/- 3 IU/mL at 120 minutes and postdialysis, respectively (P < 0.05). In contrast, BTG levels corrected for hemoconcentration with plasma protein concentrations showed no significant changes compared with baseline values. Further studies assessed the effects of two types of new and reprocessed regenerated cellulose dialyzers during four different treatments. Platelet counts at 10 and 30 minutes did not change compared with the baseline, while white blood cell counts decreased significantly. No significant changes in BTG levels occurred when corrected for hemoconcentration with either dialyzer. Additional studies with new and reprocessed regenerated cellulose dialyzers comparing 450 and 220 mL/min blood flow rates at 10 minutes showed no change in BTG. In summary, these studies show no evidence for platelet activation by routine hemodialysis with regenerated cellulose membranes. Differences from previous studies include correction of BTG for hemoconcentration due to ultrafiltration and pre-rinsing of dialyzers. Methods for assessment of cellular activation by dialysis membranes must account for hemoconcentration.

Analysis of Variance↗

Investigation of aqueous biphasic systems for the separation of lignins from cellulose in the paper pulping process.

In efforts to apply a polymer-based aqueous biphasic system (ABS) extraction to the paper pulping process, the study of the distribution of various lignin and cellulosic fractions in ABS and the effects of temperature on system composition and solute partitioning have been investigated. The partitioning of three lignin species (Indulin AT, Indulin C, and Reax 85A) have been studied in ABS prepared from stock solutions of 40% (w/w) poly(ethylene glycol) (PEG)-2000 and increasing concentrations of K2CO3, (NH4)2SO4, and NaOH. The partitioning of these lignins is affected by the free energy of hydration of the salt forming the ABS, the tie line length, and the dissociation of the sulfonic acid and hydroxyl groups of the distributed solutes. The partitioning of fibrous cellulose and diethylaminoethyl cellulose have been studied in 40% (w/w) PEG-2000-(NH4)2SO4 ABS. The hydrophilic nature of these species is important in terms of their phase preference when designing a polymer-based aqueous biphasic extraction process for use in a paper pulping process. Both cellulosic samples do not dissolve, but rather report to the salt-rich phase of an ABS. In both chemical pulping and Organosolv pulping, temperatures in excess of 120 degrees C are needed to solubilize the lignin from the cellulose fraction of wood. To study the effects of temperature on the phase diagram and solute partitioning, phthalic acid and NH499TcO4 (as system probes) have been partitioned in 40% (w/w) PEG-2000-(NH4)2SO4 ABS at known tie line lengths as a function of temperature. Temperature does not appear to affect the partitioning results beyond the expected increase in phase divergence as temperature is increased. The PEG-2000 polymer itself appears to be stable to chemical pulping conditions.

Cellulose↗

Two-stage incorporation of thymidine triphosphate into mammalian DNA as indicated by chromatography on benzoylated DEAE-cellulose.

Replicating DNA contains single-stranded regions as indicated by the extent of its recovery in the final fraction, following stepwise elution of sheared preparations from benzoylated DEAE-cellulose using 0.3 M sodium chloride, 1.0 M sodium chloride and caffeine solutions, respectively. In preparations of hepatic DNA, isolated up to 60 min after administration of [3H]thymidine to rats subjected earlier to partial hepatectomy, the proportion of radioactivity contained in the caffeine-eluted fraction progressively decreased. This change was attributable to migration of incorporated radioactivity from replicating forms to mature (double-stranded) DNA, the latter being recovered from the column in 1.0 M sodium chloride. In terms of the same chromatograms, the relative size of the 0.3 M sodium chloride-eluted fraction also decreased, this fraction of radioactivity co-eluting from benzoylated DEAE-cellulose with thymidine triphosphate. The precursor--intermediate--product relationship between the three products separated by benzoylated DEAE-cellulose chromatography was confirmed using DNA isolated from cultured mammalian cells. Early eluting radioactivity co-chromatographed with thymidine triphosphate on thin-layer cellulose, whilst the intermediate status of caffeine-eluted radioactivity was confirmed following pulse-chase labelling procedures. Utilizing stepwise chromatography of such DNA on benzoylated DEAE-cellulose, the effect of three inhibitors could thus be described as affecting either an early or late stage of DNA synthesis. Such an approach offers a simple quantitative method of monitoring influences on DNA synthesis.

Animals↗

Preparation, characterization, and tabletting properties of a new cellulose-based pharmaceutical aid.

A new cellulose-based tabletting excipient, hereinafter referred to as UICEL, has been developed by treating cellulose powder with an aqueous solution of sodium hydroxide (conc. > or = 5N) and subsequently precipitating it with ethyl alcohol. UICEL is similar in structure to Avicel PH-102, a commercial direct compression excipient commonly referred to as microcrystalline cellulose (MCC). It, however, shows the cellulose II lattice, while Avicel PH-102 belongs to the cellulose I polymorphic form. As produced, UICEL consisted of a mixture of aggregated and non-aggregated fibers. The degrees of polymerization (DP) and crystallinity (DC) of UICEL, determined by the viscosity and powder X-ray methods, were 189-207 and 47-58%, respectively. Avicel PH-102, by comparison, showed an aggregated structure with DP and DC values corresponding to 248 and 76.9%, respectively. Compared to Avicel PH-102, UICEL shows higher true density, bulk density, tap density, Carr's index and Hausner ratio values. The mean deformation pressure (P(y)) values calculated from the linear portion of the Heckel plots for UICEL and Avicel PH-102 were about 104 and 87 MPa, respectively, suggesting that UICEL is less ductile than Avicel PH-102. The hardness values of UICEL tablets increased nearly linearly with increasing compression pressures. Comparatively, Avicel PH-102 formed stronger tablets. Irrespective of the compression pressure used, all UICEL tablets disintegrated within 15 s, whereas Avicel PH-102 tablets of comparable strengths remained intact for over 12 h. In conclusion, the results show that UICEL can be used as a direct compression excipient, especially in the design and development of fast-disintegrating tablets.

Cellulose↗

Measuring the water retention capacities (MRC) of different microcrystalline cellulose grades.

The ability of various types of microcrystalline cellulose (MCC) to hold water when subjected to an applied force has been assessed by a centrifuge technique. By considering the final percent of water retained after a standard centrifugation, as a function of the initial water content, a moisture retention capacity (MRC) can be determined. Statistical analysis of the results identified that it was possible to divide the nine samples of MCC into six sub-sets in terms of final moisture content retained. Those types which contained added polymer had by far the highest water level remaining. In terms of the MRC value, statistical analysis again sub-divided the celluloses into six sub-sets, although different from those for the final water content. Again those types containing added polymer gave much higher MRC values. As experiments were carried out with initial water/MCC ratios of different levels, statistical analysis of the influence of initial water content on the MRC values was undertaken with each type of MCC. The results showed a varying dependence on initial water level with the different types of cellulose. To provide a value of MRC which characterised the cellulose, the maximum value of MRC at the lowest initial water level was identified. Samples of MCC with low values of MRC have been shown previously to require less water for processing by extrusion/spheronization, while celluloses with a high MRC value appear better for the limitation of water movement during the process of extrusion/spheronization. The water retention must, however, also be considered in association with the rheological properties of the wet powder mass. Thus, while the Avicel RC591 had the highest MRC value, its rheological properties are so that the production of pellets with such a type can be less effective than with other types of MCC.

Algorithms↗

Use of hydrophilic polymers with microcrystalline cellulose to improve extrusion-spheronization.

Microcrystalline cellulose 19 parts was combined with sodium carboxymethylcellulose, hydroxypropylmethyl cellulose, hydroxypropyl cellulose or polyvinylpyrrolidone one part, either by spray-drying or physical mixing. This combined excipient (20%) mixed with lactose (80%) and water was added to aid formation of pellets by the process of extrusion-spheronization. Spray-dry combined excipient produced pellets with higher yield, better sphericity and improved tolerance to minor variation in the level of water added, compared with the physical mix excipient. Physicochemical testing based on scanning electron microscopy with energy dispersive analysis, differential scanning calorimetry and X-ray diffraction analysis, indicated that the spray-drying with the hydrophilic polymer caused disintegration of the microcrystalline cellulose component into smaller crystallites, favouring its more uniform dispersion throughout the lactose during subsequent processing. The hydroxypropyl cellulose or polyvinylpyrrolidone containing excipients were the most satisfactory of the hydrophilic polymers examined, because they had the least adhesive strength favouring maximum yield of highly spherical pellets.

Calorimetry, Differential Scanning↗

Clostridium lentocellum SG6--a potential organism for fermentation of cellulose to acetic acid.

A cellulolytic, acetic acid producing anaerobic bacterial isolate, Gram negative, rod-shaped, motile, terminal oval shaped endospore forming bacterium identified as Clostridium lentocellum SG6 based on physiological and biochemical characteristics. It produced acetic acid as a major end product from cellulose fermentation at 37 degrees C and pH 7.2. Acetic acid production was 0.67 g/g cellulose substrate utilized in cellulose mineral salt (CMS) medium. Yeast extract (0.4%) was the best nitrogen source among the various nitrogenous nutrients tested in production medium containing 0.8% cellulose as substrate. No additional vitamins or trace elemental solution were required for acetic acid fermentation. This is the highest acetic acid fermentation yield in monoculture fermentation for direct conversion of cellulose to acetic acid.

Acetic Acid↗

The role of cellulose acetate as a matrix for aggregation of pseudoisocyanine iodide: absorption and emission studies.

Films of pseudoisocyanine iodide in a cellulose acetate matrix were prepared by spin coating and characterized by UV/Vis absorption and fluorescence spectroscopies. The comparison with self-supported films of the same dye enabled analysing the role of the matrix in the aggregation of pseudoisocyanine iodide ([PIC]I). It was proved that cellulose acetate is a suitable support for [PIC]I J-aggregates, which form during spinning, as shown by a very sharp J-band in the absorption spectra. This indicates a perfect coherence between stacked monomers in the supported J-aggregates. It was possible to individualize the emission spectrum of [PIC]I J-aggregates in cellulose acetate, by decomposition of the steady-state fluorescence spectra of the films. The dependence on the excitation wavelength of the relative emission intensities of monomers and J-aggregates, for lambda(em) = 587 nm, lead to confirm that the latter species have an absorption maximum at approximately 500 nm in cellulose acetate. Finally, polarised absorption spectra of films obtained by the vertical spin coating technique showed that cellulose acetate allows a partial orientation of J-aggregates.

Cellulose↗