Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “dynamic range”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36Linked to original sources
PubMed2004

Increased perception of loudness in autism.

Clinical reports on autism describe abnormal responses to auditory stimuli such as intolerance to sounds. The present study assessed subjective perception of loudness in subjects with autism compared to healthy controls, using two psychoacoustic tests. First, the auditory dynamic range was evaluated at six different tone frequencies. Secondly, loudness growth as a function of the intensity level of a 1 kHz tone was estimated. Verbal responses from a group of 11 children and adolescents with autism were compared to responses of 11 age- and gender- matched healthy controls. Smaller auditory dynamic ranges were found in the autistic group than in the control group, as well as increased perception of loudness, indicating hyperacusis in subjects with autism.

Acoustic Stimulation↗
PubMed2006

Sub part-per-million mass accuracy by using stepwise-external calibration in fourier transform ion cyclotron resonance mass spectrometry.

A new external calibration procedure for FT-ICR mass spectrometry is presented, stepwise-external calibration. This method is demonstrated for MALDI analysis of peptide mixtures, but is applicable to any ionization method. For this procedure, the masses of analyte peaks are first accurately measured at a low trapping potential (0.63 V) using external calibration. These accurately determined (< 1 ppm accuracy) analyte peaks are used as internal calibrant points for a second mass spectrum that is acquired for the same sample at a higher trapping potential (1.0 V). The second mass spectrum has a approximately 10-fold improvement in detection dynamic range compared with the first spectrum acquired at a low trapping potential. A calibration equation that accounts for local and global space charge is shown to provide mass accuracy with external calibration that is nearly identical to that of internal calibration, without the drawbacks of experimental complexity or reduction of abundance dynamic range. For the 609 mass peaks measured using stepwise-external calibration method, the root-mean-square error is 0.9 ppm. The errors appear to have a Gaussian distribution; 99.3% of the mass errors are shown to lie within three times the sample standard deviation (2.6 ppm) of their true value.

Algorithms↗
PubMed1995

Longitudinal assessment of physiological and psychophysical measures in cochlear implant users.

OBJECTIVE: The purpose of this study was to evaluate the effects of long-term electrical stimulation on human cochlear implant users. DESIGN: Repeated measures of electrically evoked auditory brain steam response (EABR) threshold, slope of the EABR growth function, and behavioral measures of threshold and dynamic range were made for a group of 22 Ineraid cochlear implant users and 19 Nucleus cochlear implant users over a 3- to 5-yr period. RESULTS: Data from both Ineraid and Nucleus cochlear implant users suggest that EABR threshold, slope of the EABR growth function, and behavioral measures of threshold and dynamic range remain reasonably stable for periods up to 5 yr postimplant. CONCLUSIONS: The results of this study show little evidence that prolonged electrical stimulation through daily use of a cochlear implant has deleterious effects on the auditory system.

Cochlear Implants↗
PubMed1998

A flow cytometer designed for fluorescence calibration.

In the development of suitable standards and calibration materials for fluorescence measurement, it becomes necessary to make accurate fluorescence measurements of these materials on flow cytometers. The results of such measurements may be affected by numerous sources of error, prominent among which are deviations of logarithmic amplifiers (log amps) from ideal response. To minimize the deleterious effects of log amps and multicolor fluorescence compensation circuitry on measurements, we built a flow cytometer with electronics incorporating high-precision peak detectors usable over a range from below 2 mV to 10 V, and we developed data acquisition software that transfers held peak values to a commercial 16-bit data acquisition system mounted in a personal computer running Windows 95. Fluorescence compensation is done in software, and transformation of the compensated data from a 16-bit linear to an 8-bit, 4-decade logarithmic scale is accomplished using a look-up table. Although dynamic range may be restricted by noise in the data acquisition system, high sensitivity can be achieved by photomultiplier tube gain adjustment, and it is likely that the use of a lower noise data acquisition system and/or digital processing of pulse information will enable operation over the full 4-decade dynamic range. Even at its current performance level, our instrument provides substantially better linearity over most of the scale than can be obtained using conventional electronics incorporating log amps; we believe this characteristic is critical for use in standards development.

Analog-Digital Conversion↗
PubMed2001

Standardless semiquantitative analysis of metals using single-shot laser ablation inductively coupled plasma time-of-flight mass spectrometry.

A method has been developed that allows the accurate, standardless measurement of the elemental composition of metal samples from single laser ablation (LA) pulses. This technique provides a fast, low-sample-consumption means for the characterization of samples having a range of matrixes. The method directly compares adjusted elemental signals with the total mass spectrometric signal to produce relative percent composition information. Three mathematical techniques were used to determine the accuracy and precision of single-shot LA measurement. Comparison of the techniques showed that a linear regression calculation, which plots individual elemental signals as a function of the summed signal for all elements in the sample on a point-by-point basis during a laser ablation transient proved superior. The simultaneous extraction capability of time-of-flight mass spectrometry permits the sampling of all analytes from any temporal position within the transient laser ablation pulse, thereby reducing quantitation error. A typical concentration dynamic range of 3 orders of magnitude, from 0.1 to 100%, was achieved. However, by measuring low-abundance isotopes for matrix elements, the dynamic range of the technique was extended to 4 orders of magnitude. The new technique is largely immune to sample matrix effects commonly experienced in laser ablation. By performing a complete elemental analysis from a single ablation pulse, high spatial resolution should be achieved.

Journal Article↗
PubMed2001

Host range and dynamics of mycoplasmal conjunctivitis among birds in North America.

An epidemic of conjunctivitis among house finches (Carpodacus mexicanus) caused by Mycoplasma gallisepticum (MG) bacterial infections was first described in 1994. The disease exhibits high primary host specificity, but has been isolated from a limited number of secondary avian hosts at various times and locations. We used records from the House Finch Disease Survey, a continent-wide, volunteer monitoring project, to document the host range of conjunctivitis in birds at feeding stations and to investigate how disease in house finches might influence the spread of conjunctivitis to other hosts. Between 1994 and 1998, participants recorded 675 cases of conjunctivitis in 31 species other than house finches in eastern North America. Seventy five % of these cases were observed among three species: American goldfinches (Carduelis tristis), purple finches (Carpodacus purpureus) and house sparrows (Passer domesticus). The proportion of sites with diseased wintering populations of the three species increased over the 4 yr study and coincided with range expansion of conjunctivitis in house finches. Sites with diseased house finches present were significantly more likely to report conjunctivitis in each of the three species during the same month. These observations are most consistent with transmission of an infectious agent (presumably MG) from house finches to these secondary hosts via spillover of localized epidemics, rather than sustained interspecific transmission.

Animals↗
PubMed2004

Modeling of homogeneous cloned enzyme donor immunoassay.

One of the most widely used analytical techniques for sensitive detection of biologically and clinically significant analytes is the immunoassay. In recent years direct immunoprobes allowing label-free detection of the interaction between the antibody and the target analyte have proved their capabilities as fast, simple, and nevertheless highly sensitive methods. Cloned enzyme donor immunoassay (CEDIA) homogeneous assay is based on the bacterial enzyme beta-galactosidase, which has been genetically engineered into two inactive fragments, enzyme donor and enzyme acceptor. Reassociation of the fragments in the assay forms active enzyme, which acts on substrate to generate a colored product. A comprehensive kinetic model of CEDIA is developed to aid in understanding this method and to facilitate development of a truly homogeneous version, potentially applicable to a dipstick-type multianalyte point of care analytical device (ChemChip). Although the standard assay involves a two-step process, we also chose to model a single-combined process, which would be simpler to apply in a ChemChip device. From the modeling simulation, we obtain the time courses of the amounts of product and active enzyme, from which the dynamic ranges can be obtained as 10(-6)-10(-7) and 10(-5)-10(-7)M analyte concentration for two-step and single-combined processes under the conditions of the assumed parameters, respectively. A simple one-step immunoassay has the merit of reducing time and cost and has an improved dynamic range.

Immunoenzyme Techniques↗
PubMed2006

Gold glyconanoparticles for mimics and measurement of metal ion-mediated carbohydrate-carbohydrate interactions.

To mimic and measure calcium ion-mediated carbohydrate-carbohydrate interactions, four lactose derivatives have been synthesized for assembly on gold nanoparticles. The series of lactose derivatives varied by the length of the thiolated ethylene glycol anchor chain [O(CH2CH2O)(m)CH2CH2SH; where m = 0, 1, 2, and 3] used to self-assemble the carbohydrates to the preformed gold nanoparticles of ca. 16 nm diameter. Upon addition of calcium ions to the lactose-stabilized nanoparticles, rapid carbohydrate-carbohydrate interactions were visualized and subsequently measured using UV-visible spectrometry and transmission electron microscopy (TEM). The nanoparticle aggregates formed via metal-mediated carbohydrate-carbohydrate interactions could be readily redispersed through the addition of EDTA. Multiple reaggregation and redispersion cycles were achieved, confirming that the aggregation process was due to metal ion-mediated carbohydrate interactions rather than calcium chelation by residual citrate ions on the particle surface. The essential involvement of the lactose moiety in Ca2+ complexation was shown by control measurements on related D-glucose-derivatized nanoparticles, where a significantly reduced aggregation response was obtained only at high ion concentrations. Other group 2 metal ions with radii larger than that of calcium, viz., barium and strontium, were also shown to mediate the aggregation of the lactose-stabilized nanoparticles. The induced aggregation of the lactose nanoparticles was determined to be quantitatively dependent upon the calcium ion concentration. Furthermore, the analytical sensitivity of the calcium-induced aggregation and the linear dynamic range were dependent on the length of the ethylene glycol anchor chain. The shortest ethylene glycol chain (m = 0) gave the most sensitive response with the optimum limit of detection (0.8 mM Ca2+), whereas the longest ethylene glycol chain (m = 3) provides a measurement of calcium ion concentration over the largest linear dynamic range (10-35 mM Ca2+). This work has shown that the self-assembled deposition of lactose derivatives on gold nanoparticles provides multivalent carbohydrate surfaces that can be used as mimics for the measurement of biologically relevant carbohydrate-carbohydrate interactions. Additionally, this study has highlighted the importance of the structure and length of the ligand that anchors the carbohydrate sugar to the gold particle surface to facilitate such carbohydrate interactions and for "tuning" the analytical characteristics of bioassays developed using metal nanoparticle technology.

Acetylation↗
PubMed2000

The relationship between speech perception and electrode discrimination in cochlear implantees.

Speech Intelligibility Index (SII) procedures were used to measure the amount of speech information perceived in five frequency bands (170-570, 570-1170, 1170-1768, 1768-2680, and 2680-5744 Hz) by 15 users of the Cochlear Ltd. CI-22M implant and Spectra-22/SPEAK processor. The speech information perceived was compared to that perceived by normal-hearing listeners. The ability of these subjects to discriminate between stimulation on adjacent electrodes corresponding to each frequency band was also investigated, using a 4IFC procedure with random current level variations of between 0% and 60% of the dynamic range. Relative to normal-hearing listeners, speech information was, on average, significantly more reduced in the four frequency regions between 170 and 2680 Hz than in the region 2680-5744 Hz. There was a significant correlation between electrode discrimination ability (when the random level variation encompassed 20% or more of the dynamic range) and the amount of speech information perceived in the four frequency regions between 170 and 2680 Hz. There was no such correlation in the region 2680-5744 Hz, regardless of the extent of random level variation. These results indicate that speech information in the low to medium frequencies is more difficult for implantees to perceive, that this difficulty is correlated with the difficulty in discriminating electrode place in the presence of random loudness variations, and that fine spectral discrimination may be relatively more important in the vowel-formant regions than in higher frequency regions.

Adolescent↗
PubMed1991

Factors that influence rate-versus-intensity relations in single cochlear nerve fibers of the gerbil.

The relationship between characteristic frequency (CF) and rate-intensity curve shape was examined in 144 cochlear nerve fibers obtained from 39 Mongolian gerbils. Quasi-steady-state firing rates were measured in response to tone bursts at the CF. From each intensity curve, estimates of slope, firing rate at saturation, and dynamic range were derived using nonlinear curve fitting. Saturation firing rate was depressed for stimuli with a high duty cycle, especially for units with low rates of spontaneous discharge. The distributions of slope and saturation firing rate differed for fibers with CFs above and below 3 to 4 kHz. The interrelation of slope, dynamic range, maximum driven rate, and spontaneous firing rate was also different for fibers with CFs above and below this band. This mid-CF transition is discussed in terms of possible longitudinal changes in the function of the gerbil cochlea.

Animals↗
PubMed2004

Fourier-domain holography in photorefractive quantum-well films.

Fourier-domain holography (FDH) is investigated as a candidate for holographic optical coherence imaging to produce real-time images of structure inside living tissue and turbid media. The effects of spatial filtering, the background intensity distributions, and the role of background noise in determining dynamic range are evaluated for both FDH and image-domain holography (IDH). The grating washout effect in FDH (edge enhancement) is removed by use of a vibrating diffuser that consequently improves the image quality. By comparing holographic images and background images of FDH and IDH we show that FDH provides a higher dynamic range and a higher image quality than IDH for this specific application of imaging diffuse volumetric objects.

Equipment Design↗
PubMed1996

Electrophysiological responses from receptor neurons in mosquito maxillary palp sensilla.

We recently completed an electrophysiological study of the receptor neurons found in the sensilla basiconica on the maxillary palps of mosquitoes. Our results describe a class of receptor neurons whose properties could provide the afferent input required for some aspects of CO2-modulated host-locating behaviour. First, these neurons have apparent thresholds (150-300 ppm) which are at, or below, the concentration of CO2 (300-330 ppm) normally reported for ambient air. Second, their concentration-response functions are steep, such that small (50 ppm) fluctuations in concentration elicit reliable changes in activity. Third, they behave like absolute CO2 detectors in that their ability to respond to step increases in CO2 concentration is little influenced by the background concentration of CO2. And fourth, a linear extrapolation of the observed response function to the levels that might be expected near vertebrate hosts suggests that these neurons have sufficient dynamic range to cover those CO2 concentrations that should be encountered during a large portion of the behaviour likely involved in host location. The mosquito CO2 receptor neuron thus has an appropriately low threshold and a steep concentration-response function, it is not desensitized by ambient levels of stimulation, and it has a dynamic range appropriate for the distribution of CO2 concentrations expected in the environment. In addition, this sensillum contains two other receptor neurons, neither of which respond to CO2. One of these neurons responds to stimulation with very low doses of another behaviourally relevant compound, 1-octen-3-ol.

Aedes↗
PubMed2003

[Flat-panel detectors in X-ray systems].

For all application segments X-ray systems with flat-panel detectors increasingly enter the market. In digital radiography,mammography and cardiologic angiography flat-panel detectors are already well established while they are made ready for market introduction in general angiography and fluoroscopy. Two flat-panel detector technologies are available. One technology is based on an indirect conversion process of X-rays while the other one uses a direct conversion method. For radiography and dynamic applications the indirect method provides substantial advantages, while the direct method has some benefits for mammography. In radiography and mammography flat-panel detectors lead to clear improvements with respect to workflow, image quality and dose reduction potentials. These improvements are fostered by the immediate availability of the image, the large dynamic range and the high sensitivity to X-rays. New applications and the use of complex image processing algorithms have the potential to enlarge the present diagnostic range of applications. Up to now, image intensifiers are still the well-established technology for angiography and fluoroscopy. Nevertheless flat-panel detectors begin to enter this field, especially in cardiologic angiography. Characteristics of flat-panel detectors such as the availability of distortion-free images, the excellent contrast resolution, the large dynamic range, the high sensitivity to X-rays and the usability in magnetic fields provide the basis for improved and new diagnostic and interventional methods.

Angiography↗
PubMed2000

Real-time polymerase chain reaction assay for cell-associated HTLV type I DNA viral load.

We have developed a quantitative real-time PCR assay for HTLV-I DNA. This assay approach uses real-time monitoring of fluorescent signal generation as a consequence of Taq-mediated amplification of specific target sequences to allow real-time kinetic analysis of amplicon production. This kinetic approach yields excellent sensitivity and an extremely broad linear dynamic range, and ensures that quantitation is based on analysis during the exponential phase of amplification, regardless of the input template copy number. The HTLV-I DNA assay has a nominal threshold sensitivity of 10 copy Eq/reaction, although single-copy plasmid template can be detected at frequencies consistent with statistical prediction. The linear dynamic range is in excess of 5 logs. Interassay reproducibility averages 14% (coefficient of variation) for control templates over a range of 10(1) to 10(6) copy Eq/reaction and 25%, based on studies of extraction and analysis of replicate aliquots of PBMC specimens from HTLV-I-infected subjects. The primer/probe combination targets tax sequences conserved across described HTLV-I and HTLV-II isolates. Parallel quantitation in the same samples of an endogenous sequence present at a known copy number per cell allows normalization of results for potential variation in DNA recovery. Availability of this assay should facilitate studies of basic pathogenesis and clinical evaluation of HTLV-I and HTLV-II infection, as well as assessment of therapeutic approaches.

DNA Primers↗
PubMed2002

Comparison of commercial assays for the quantification of HBV DNA load in health care workers: calibration differences.

Until recently, carriers of hepatitis B virus (HBV) were allowed to undertake exposure prone procedures providing their serum did not contain HBeAg. However, the recent description of hepatitis B transmission events occurring from HBV-infected health care workers who conduct exposure prone procedures demonstrated that the then current Department of Health guidelines needed to be revised. As part of a series of studies carried out to determine if viral load measurements are a more secure means of assessing the conduct of exposure prone procedures, the suitability of commercially available assays for HBV DNA detection and quantification were investigated. This study describes a comparative analysis on the performances of three assays each based on a different methodology. The assays included the QUANTIPLEX HBV DNA Assay (bDNA), (Chiron Diagnostics Ltd.), the AMPLICOR HBV Monitor Test, (Roche Diagnostics Systems) and the Digene Hybrid Capture System HBV DNA Assay (Digene Corporation). Calibration curves from experiments using the Eurohep ad and ay HBV DNA standard controls indicated a close correlation between the three assays over the dynamic ranges claimed by the manufacturers, although the Quantiplex assay did appear to be over-reporting. This became more apparent when testing patients undergoing anti-viral therapy where the Quantiplex assay consistently over-reported by 0.5 log(10) when compared with the Amplicor assay. The results of this study indicate that based on its dynamic range, the Amplicor HBV Monitor test is the most appropriate assay for the routine investigation of anti-HBe carriers, which will have lower levels of HBV DNA. The investigation also highlights the need for using accepted standard HBV DNA control sera. This will be essential when using an assay to establish whether health care workers who are hepatitis B carriers can be allowed to perform exposure prone procedures under the new guidelines of the UK Department of Health.

Calibration↗
PubMed1992

Limitations of image enhancement for the visually impaired.

Image enhancement as an aid for the visually impaired may improve visibility of TV programs and provide portable visual aid. This paper describes the current techniques for image enhancement and their underlying models. The limitations of the various techniques and of potential methods of implementation are high-lighted. Initial work in this area was based on a linear model. The finite dynamic range available in the video display and contamination of the enhanced image by high spatial frequency noise limited the model's usefulness. I propose a method to address some limitations of the original model that considers the nonlinear response of the visual system and requires enhancement of subthreshold spatial information only. This modification may increase the dynamic range available by decreasing the range previously used by the linear models to enhance visible details. However, for the modified technique to be most effective, the enhancement has to be continuously tuned, based on the patient's visual loss and the spatial frequency content of the displayed images. The implications of these limitations for the potential implementation in TV are discussed. Implementation of an image-enhancing visual aid in a head-mounted, binocular, full-field, virtual vision device may cause substantial difficulties. Patient adaptation may be difficult due to head movement and interaction of the vestibular system response with the head-mounted display. An alternate, bioptic design is proposed in which the display is positioned above or below the line of sight to be examined intermittently, possibly in a freeze-frame mode. Such implementation is also likely to be less expensive, enabling more users access to the device.

Audiovisual Aids↗
PubMed2006

Sensitive Listeria spp. immunoassay based on europium(III) nanoparticulate labels using time-resolved fluorescence.

Listeria spp. are Gram-positive rod shaped bacteria found universally in the environment. Pathogenic Listeria monocytogenes is seldom harmful to healthy adults, but can cause serious disease, listeriosis, especially to pregnant women, neonates, and elderly or immunocompromised people. Conventional methods for screening Listeria in food samples are time consuming and laborious, involving the use of a range of liquid media and plate cultures. In the current study, the total analysis time was shortened by employing a sensitive Listeria assay, which was able to detect the bacteria in low concentrations. Sensitivity of the sandwich immunoassay was substantially improved by utilizing europium(III)-chelate containing latex nanoparticles as tracers. Each 107 nm nanoparticle contained approximately 31000 europium(III)-chelates which enhanced the specific activity of the label. The sensitive nanoparticulate immunoassay developed for Listeria spp. was performed in one-step and two-step formats. One-step assay was notably faster, 15 min, and simpler to execute having analytical sensitivity of 300 CFU/ml and a dynamic range of three orders of magnitude. The sensitivity, 20 CFU/ml, of the 4 h two-step assay clearly exceeded that of the one-step assay, and the dynamic range was nearly five orders of magnitude. Food and environmental samples were measured against a commercial L. monocytogenes immunoassay with good correlation. The developed sensitive assay enabled shorter sample enrichment times and, therefore, faster analysis of Listeria spp. Obviously the detection of several other bacteria can also be enhanced by applying the nanoparticle assay technology.

Colony Count, Microbial↗
PubMed2001

A unique charge-coupled device/xenon arc lamp based imaging system for the accurate detection and quantitation of multicolour fluorescence.

In recent years the use of fluorescent dyes in biological applications has dramatically increased. The continual improvement in the capabilities of these fluorescent dyes demands increasingly sensitive detection systems that provide accurate quantitation over a wide linear dynamic range. In the field of proteomics, the detection, quantitation and identification of very low abundance proteins are of extreme importance in understanding cellular processes. Therefore, the instrumentation used to acquire an image of such samples, for spot picking and identification by mass spectrometry, must be sensitive enough to be able, not only, to maximise the sensitivity and dynamic range of the staining dyes but, as importantly, adapt to the ever changing portfolio of fluorescent dyes as they become available. Just as the available fluorescent probes are improving and evolving so are the users application requirements. Therefore, the instrumentation chosen must be flexible to address and adapt to those changing needs. As a result, a highly competitive market for the supply and production of such dyes and the instrumentation for their detection and quantitation have emerged. The instrumentation currently available is based on either laser/photomultiplier tube (PMT) scanning or lamp/charge-coupled device (CCD) based mechanisms. This review briefly discusses the advantages and disadvantages of both System types for fluorescence imaging, gives a technical overview of CCD technology and describes in detail a unique xenon/are lamp CCD based instrument, from PerkinElmer Life Sciences. The Wallac-1442 ARTHUR is unique in its ability to scan both large areas at high resolution and give accurate selectable excitation over the whole of the UV/visible range. It operates by filtering both the excitation and emission wavelengths, providing optimal and accurate measurement and quantitation of virtually any available dye and allows excellent spectral resolution between different fluorophores. This flexibility and excitation accuracy is key to multicolour applications and future adaptation of the instrument to address the application requirements and newly emerging dyes.

Computers↗