Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Cellulose”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 649 records · Page 36Linked to original sources

An assay for the detection of specific binding of 3-methylcholanthrene to rat liver cytosolic proteins using DEAE-cellulose.

A method for the detection of the specific binding of 3-methylcholanthrene to rat liver cytosolic proteins is described. The separation of the protein-bound 3-methylcholanthrene from the free 3-methylcholanthrene was achieved using a batch DEAE-cellulose technique. Extraction of the DEAE-cellulose with 0.3 M KCl allowed the selective release and measurement of the amount of protein-bound 3-methylcholanthrene. The assay was optimized for the following parameters: time of incubation with DEAE-cellulose, time required for salt extraction, protein concentration, the concentration of KCl required to elute the specific binding proteins, the amount of DEAE-cellulose required to bind the specific binding proteins, and ligand specificity. The sedimentation properties of those 3-methylcholanthrene-binding proteins which were extracted with salt from DEAE-cellulose were examined on 5 to 20% sucrose gradients; the major binding species sedimented as a broad peak at 4.5 S.

Animals↗

Mass spectrometric studies of the thermal decomposition of carbohydrates using 13C-labeled cellulose and glucose.

The mechanism of the thermal decomposition of carbohydrates is very important to the development of fuels, fibers, and paper products. To help gain more insight into the pyrolysis chemistry of cellulose, we have carried out experimental studies using Acetobacter xylinum cellulose grown on D-(1-13C)-glucose medium with incorporation levels of 1-13C of 14%, as determined by 13C NMR analysis. Samples of the labeled cellulose, as well as D-(1-13C)- and D-(2-13C)-glucose, were pyrolyzed under fast-heating conditions and the products analyzed by molecular beam mass spectrometry (MBMS). From the labeled cellulose samples, statistically significant levels of enrichment were observed for the pyrolysis products that occur at m/z 110, 114, 126, 144, and 191, but not at m/z 98, 60, or 31. The lack of enrichment in the latter fragments indicates that they do not incorporate C-1. Samples were treated with 0.1% aqueous KOH to favor the formation of glycolaldehyde, but even in this case this major product was not enriched. These results suggest that the m/z 60 ion is an EI fragment ion of levoglucosan, formed by loss of neutral species containing C-1. However, the m/z 191 ion was found to contain two C-1 carbons. Collision-induced dissociation results for this ion suggest that it consists of a formate group. The structure of this ion is proposed to be the protonated formate of levoglucosan at the C-4 position, derived from either a reverse aldol reaction or a (+/-)-Diels-Alder reaction. The (1-13C)-glucose pyrolysis product distribution is similar to that for (1-13C)-labeled cellulose. The (2-13C)-glucose pyrolysis product distribution shows significant contribution from C-2 at the M + 1 peaks of m/z 32, 43, 60, 73, 85, and 97, indicating major incorporations of C-2 in glycolaldehyde in contrast to the lack of incorporation of the C-1 position in this major product.

Analysis of Variance↗

Cellobiose oxidase of Phanerochaete chrysosporium enhances crystalline cellulose degradation by cellulases.

The effect of Phanerochaete chrysosporium cellobiose oxidase (CBO) on microcrystalline cellulose hydrolysis by Trichoderma cellulases was determined. Addition of 10 micrograms.ml-1 CBO to a reaction mixture containing T. viride cellulase increased glucose and cellobiose production by 10% and 48%, respectively. Cellulose weight loss was also enhanced by 19%. At higher concentrations (20-80 micrograms.ml-1), CBO decreased glucose and cellobiose production. Cellulose weight loss at 60 micrograms.ml-1 CBO was 76% compared to control cellulase reactions. This decrease appears to be due to inactivation of cellulase by H2O2 produced via CBO reaction, because addition of catalase enhances sugar production and cellulose weight loss. These findings suggest that at low, perhaps physiologically relevant concentrations, CBO enhances crystalline cellulose degradation by cellulases.

Basidiomycota↗

Use of cellulose ethers as peptide antigen carriers in the ELISA.

A procedure for surface immobilisation of peptides is described. Insulin, a model for peptide antigens, was covalently coupled to alkyl-hydroxyalkyl-cellulose ethers. The cellulose-insulin conjugate was then adsorbed to the plastic surface of microtitre wells and was used as antigen in an ELISA assay. The adsorbed conjugate was shown to be stable in undiluted plasma or serum whereas adsorbed insulin was removed from the surface by incubation in undiluted serum or plasma. Adsorption of serum albumin or cellulose ether polymers to the microtitre plates followed by incubation with whole blood, showed that adsorbed albumin but not the cellulose ether was exchanged by fibrinogen at the surface. The results indicate that coupling of peptides to alkyl-hydroxyalkyl-cellulose ethers is an efficient means of immobilising peptide antigens to hydrophobic surfaces.

Antigens↗

Nucleic acid hybridization using DNA covalently coupled to cellulose.

We describe a method for linking RNA and DNA covalently to finely divided cellulose through a diazotized aryl amine, which reacts primarily with guanine and uracil (thymine) residues of single strands. The high efficiency of coupling and high capacity of the cellulose for nucleic acid make possible a product with as much as 67 mug of nucleic acid per mg of cellulose. The product is especially suitable for hybridization experiments where very low backgrounds are important, and it is stable in 99% formamide at 80 degrees C so that hybridized nucleic acid can be recovered easily. Full length linear Simian Virus 40 (SV40) DNA, produced by cleavage of SV40(I) DNA with S1 nuclease, can be coupled to diazo cellulose with an efficiency of 80-90%, and is effective in hybridization experiments with SV40 DNA, complementary RNA synthesized in vitro from SV40(I) DNA with E. coli RNA polymerase, and the SV40-specific fraction of total RNA from SV40-infected and transformed cells. In these experiments an excess of cellulose-bound DNA was used, and the efficiency of hybridization was about 90% when ribonuclease treatment of the hybrids was omitted.

Animals↗

Enzyme immobilization using a cellulose-binding domain: properties of a beta-glucosidase fusion protein.

Using molecular genetic techniques, a fusion protein has been produced which contains the cellulose-binding domain (CBD) of an exoglucanase (Cex) from Cellulomonas fimi fused to a beta-glucosidase (Abg) from Agrobacterium sp. The CBD functions as an affinity tag for the simultaneous purification and immobilization of the enzyme on cellulose. Binding to cellulose was stable for prolonged periods at temperatures from 4 degrees C to at least 50 degrees C, at ionic strengths from 10 mM to greater than 1 M, and at pH values below 8. The fusion protein can be desorbed from cellulose with distilled water or at pH greater than 8. Immobilized enzyme columns of the fusion protein bound to cotton fibers exhibited stable beta-glucosidase activity for at least 10 days of continuous operation at temperatures up to 37 degrees C. At higher temperatures, the bound enzyme lost activity. The thermal stability of the fusion protein was greatly improved by immobilization. Immobilization did not alter the pH stability. Except for its ability to bind to cellulose, the properties of the fusion protein were virtually the same as those of the native enzyme.

Adsorption↗

Hemicelluloses as structure regulators in the aggregation of native cellulose.

The influence of hemicelluloses on the aggregation of cellulose in higher plant cell walls was modelled by adding hemicelluloses to cultures of the cellulose producer Acetobacter xylinum. Characterization of the celluloses by X-ray diffractometry showed them to be more like those that occur in higher plants; the coaggregation of the hemicelluloses suggests their occlusion within and between the crystalline domains of the celluloses. The authors propose that hemicelluloses may be primary moderators of the tertiary structure of cell wall celluloses, allowing the development of a wide range of properties.

Acetobacter↗

Modification of crystallinity and crystalline structure of Acetobacter xylinum cellulose in the presence of water-soluble beta-1,4-linked polysaccharides: 13C-NMR evidence.

Cellulose produced by Acetobacter xylinum in medium containing 0.5% xyloglucan or glucomannan showed altered crystallinities and shifted I alpha/I beta ratios when analysed by solid-state 13C-NMR. By estimating the spectra of cellulose components in each composite, a decreased I alpha content was shown to be countered by increased I beta content in cellulose aggregated in the presence of xyloglucan, causing minimal loss of crystallinity. However, the I alpha decrease was linked primarily to increased disordered content in cellulose produced in medium containing glucomannan. These results are considered in the light of two models for the morphological disposition of the I alpha phase: (i) a series model, proposed on the basis of electron diffraction measurements for an algal cellulose, in which regions of I alpha and I beta alternate along the length of a microfibril, and (ii) a superlattice model, in which the I alpha and I beta domains co-exist throughout the cross-section of each microfibril and form as a result of hierarchical aggregation. The latter model offers clearer insight into the role of the polysaccharides in inhibiting the formation of I alpha crystalline regions. In this superlattice model, polysaccharides adsorbed on surfaces of the most elementary aggregates are displaced to varying degrees during subsequent aggregation, with the presence of these polysaccharides altering the extent of I alpha production at interfaces.

Cellulose↗

Fractionation of chromatin, released by nuclease digestion, on ECTHAM-cellulose. Separation of active and inactive chromatin.

Chromatin released by two nucleases under various ionic conditions has been fractionated by chromatography on ECTHAM-cellulose. Mg2+ -soluble chromatin, which according to Gottesfeld and Partington is enriched in transcribed DNA sequences (Gottesfeld, J.M. and Partington, G.A., (1977) Cell 12, 953-962) and produced by DNAase II digestion at intermediate ionic strength, comprises material eluting from ECTHAM-cellulose at 80-100 mM Cl-, pH 6.8-7.0, whereas bulk, Mg2+ -insoluble chromatin comprises more tightly binding material. Free hnRNP particles elute at 30 mM Cl-, pH 6.8. Oligonucleosomes, which according to Dimitriadis and Tata are enriched in transcribed sequences (Dimitriadis, G.J. and Tata, J.R. (1980) Biochem. J. 187, 467-477) and produced by micrococcal nuclease digestion at physiological ionic strength, also elute predominantly at 80-100 mM Cl-, pH 6.8-7.0. When liver nuclei are digested with micrococcal nuclease at low ionic strength, the most rapidly released chromatin is enriched in nascent RNA and hnRNP particles, and binds weakly to ECTHAM-cellulose. More slowly solubilised chromatin, containing fewer hnRNP particles, binds much more strongly to ECTHAM-cellulose. In confirmation of results with mechanically sheared chromatin, the affinity of particular chromatin fractions is not dependent on the size of chromatin particles, rather it reflects the differing composition, and in particular the non-histone protein and hnRNP content, which, we propose, determines the conformation adopted by different chromatin fractions in the cation conditions used for elution from ECTHAM-cellulose.

Animals↗

The toxicity of purified cellulose in studies with laboratory animals.

The available literature has been reviewed for studies in laboratory animals using purified cellulose, as the production of purified cellulose may result in trace organochlorine contamination. The chronic ingestion of purified cellulose over the entire lifespans in rats and mice does not result in any increase in spontaneous disease or neoplasia. Further, purified cellulose does not display promotional activity in the mammary gland, the colon, or the bladder of rats and does not significantly alter the absorption or the metabolism of dietary components. No adverse effects were found on reproduction or neonate development in rats and mice. Therefore, no adverse health effects in humans are expected from exposure to purified cellulose.

Animals↗

Identification of celluloses with Fourier-transform (FT) mid-infrared, FT-Raman and near-infrared spectrometry.

Five different celluloses are studied with FT-IR, FT-Raman and near-infrared (NIR) spectrometry, and the fingerprint region of the spectra is assigned. Identification of each of the five celluloses is possible with each of the three vibrational methods. Four different batches of hydroxyethyl cellulose yield very similar spectra with each of the three vibrational methods. Four different batches of hydroxyethyl cellulose yield very similar spectra with each of the three methods. The methods are compared with respect to their capability to discriminate between celluloses and batches, and with respect to ease and feasibility of sample preparation.

Cellulose↗

Cellulose acetates from linters and sisal: correlation between synthesis conditions in DMAc/LiCl and product properties.

We report the acetylation of celluloses from sisal (untreated and alkali treated) and cotton linters (alkali treated), under homogeneous solution conditions, using DMAc/LiCl as solvent system. Our target was to evaluate the effects of cellulose dissolution and reactions conditions on the product properties. The products were characterized in terms of degree of substitution (DS) by 1H NMR, and molar weight distribution (MWD) by size exclusion chromatography. Changes in the DS of the products were correlated with reaction conditions and solution properties. It was found that the dissolution of celluloses and degree of substitution of cellulose derivatives depends on a fine adjustment of the dissolution/derivatization conditions, as well as on the origin (sisal or linters) of celluloses.

Acetamides↗

Studying the effects of reaction conditions on components of dairy manure and cellulose accumulation using dilute acid treatment.

The objectives of this study were to statistically study the effects of reaction conditions of temperature, acid concentration, and reaction time on manure components of cellulose, hemicellulose, lignin, and nitrogen during dilute acid treatment of dairy manure; and to further optimize the accumulation of cellulose for later enzymatic conversion to glucose. A 2(3) full factorial design was adopted to investigate the effects of the reaction conditions on each individual component and later followed by a 3-factor central composite design which was used to obtain the optimal conditions for cellulose accumulation. The results indicated that acid was the most important factor for changes of all the components. The results also showed that two other individual factors, reaction time and temperature, as well as the interactions among all three factors had significant influences on the changes. In addition, the optimal conditions for cellulose accumulation were 2.8h reaction time, 140 degrees C reaction temperature, and 1.0% acid concentration. Under these conditions cellulose content reached 31.0% while hemicellulose, lignin and nitrogen content were 3.2%, 20.8% and 2.4%, respectively.

Animals↗

FTIR analysis of cellulose treated with sodium hydroxide and carbon dioxide.

Cellulose samples treated with sodium hydroxide (NaOH) and carbon dioxide in dimethylacetamide (DMAc) were analyzed by FTIR spectroscopy. Absorbance of hydrogen-bonded OH stretching was considerably decreased by the treatment of NaOH and carbon dioxide. The relative absorbance ratio (A(4000-2995)/A(993)) represented the decrease of absorbance as a criterion of hydrogen-bond intensity (HBI). The absorbance of the band at 1430cm(-1) due to a crystalline absorption was also decreased by NaOH treatment. The absorbance ratio of the bands at 1430 and 987-893cm(-1) (A(1430)/A(900)), adopted as crystallinity index (CI), was closely related to the portion of cellulose I structure. With the help of FTIR equipped with an on-line evacuation apparatus, broad OH bending due to bound water could be eliminated. FTIR spectra of the carbon dioxide-treated cellulose samples at 1700-1525cm(-1) were divided into some bands including 1663, 1635, 1616, and 1593cm(-1). The broad OH bending due to bound water at 1641-1645cm(-1) was resolved to two bands at 1663 and 1635cm(-1). As a trace of DMAc, the band at 1616cm(-1) is disappeared by washing for the cellulose treated with carbon dioxide (Cell 1-C and Cell 2/60-C). The decrease of HBI, the easy removal of DMAc, and the band at 1593cm(-1) supported the introduction of new chemical structure in cellulose. The bands shown at 1593 and 1470cm(-1) was assigned as hydrogen-bonded carbonyl stretching and O-C-O stretching of the carbonate ion.

Carbon Dioxide↗

Effective cellulose degradation by a mixed-culture system composed of a cellulolytic Clostridium and aerobic non-cellulolytic bacteria.

A stable cellulose-degrading microflora enriched from composting materials has been analyzed in our laboratory. Cellulose-degrading efficiency of an anaerobic cellulolytic isolate, Clostridium straminisolvens CSK1, was remarkably lower than that of the original microflora. We successfully constructed bacterial communities with effective cellulose degradation by mixing C. straminisolvens CSK1 with aerobic non-cellulolytic bacteria isolated from the original microflora. Comparison of the cellulose degradation processes of the pure culture of C. straminisolvens CSK1 and the mixed-culture indicated that non-cellulolytic bacteria essentially contribute to cellulose degradation by supplying anaerobic environment, consuming metabolites, which otherwise deteriorate the cellulolytic activity, and by neutralizing pH.

Bacteria, Anaerobic↗

Photoreactive cellulose membrane--A novel matrix for covalent immobilization of biomolecules.

We report a simple and mild procedure for the preparation of a photoreactive cellulose membrane capable of forming a covalent bond with a biomolecule in presence of 365 nm UV light. Photoreactive cellulose membrane was prepared by the reaction of fluoro group of 1-fluoro-2-nitro-4-azidobenzene (FNAB) and hydroxyl group of the cellulose in an alkaline medium. X-ray photoelectron spectroscopy (XPS) of the photoreactive cellulose confirmed the incorporation of FNAB moiety. Azido group of the photoreactive membrane on exposure to UV light transforms into highly reactive nitrene which binds with a protein. The efficacy of the activated membrane was checked by immobilizing glucose oxidase (GOD) onto it in presence of light. Immobilized GOD was found to have improved thermal, pH and storage stability. Photoreactive cellulose membrane was successfully used in enzyme-linked immunosorbent assay (ELISA) technique. The antibody immobilized onto such support by UV irradiation in 30 min showed similar ELISA value than the antibody immobilized onto a polystyrene ELISA plate in 12h incubation at 4 degrees C by conventional method.

Adsorption↗

Model cellulose films exposed to H. insolens glucoside hydrolase family 45 endo-cellulase--the effect of the carbohydrate-binding module.

The effects of enzyme structure and activity on the degradation of model cellulose substrates were investigated by ellipsometry for the cellulase Humicola insolens GH45. The inactive variant D10N was found to adsorb at the cellulose surface but also to be incorporated into the cellulose films to an extent that depended on pH. For the native protein, the initial adsorption monitored for the inactive variant D10N was followed by enzyme-mediated degradation of the cellulose films. Again, a dependence on pH was found, such that higher pH resulted in slower enzymatic degradation. Removing the carbohydrate-binding module eliminated this pH dependence but also resulted in a decreased adsorption to the cellulose surface, and in a decreased net catalytic effect.

Ascomycota↗

X-ray crystal structure of a non-crystalline cellulose-specific carbohydrate-binding module: CBM28.

Natural cellulose exists as a composite of different forms, which have historically been broadly characterized as "crystalline" or "amorphous". The recognition of both of these forms of cellulose by the carbohydrate-binding modules (CBM) of microbial glycoside hydrolases is central to natural and efficient biotechnological conversion of plant cell wall biomass. There is increasing evidence that, at least some, individual binding modules target distinct and different regions of non-crystalline "amorphous" cellulose. Competition experiments show that CBM28 modules do not compete with CBM17 modules when binding to non-crystalline cellulose. The structure of the BspCBM28 (http://afmb.cnrs-mrs.fr/CAZY/) module from the Bacillus sp. 1139 family GH5 endoglucanase, comprising a 191 amino acid protein, has therefore been determined at 1.4A resolution using single isomorphous replacement with anomalous scattering methods. The structure reveals a "beta-jelly roll" topology, with high degree of similarity to the structure of CBM17 domains. Sequence and structural conservation strongly suggests that these two families of domains have evolved through gene duplication and subsequent divergence. The ligand-binding site "topographies" of CBMs from families 28, 17 and 4 begins to shed light on the differential recognition of non-crystalline cellulose by multi-modular plant cell wall-degrading enzymes.

Binding, Competitive↗